ERROR: Xflow - map: the tube has been completed

Similar Questions

• Cannot run the disk error check: check the disk has been disabled by a program use system restore.

  Title: How re - enable disk check after it has been disabled?

  I used a registry repair whichremoved all system restore and disabled of the disk check points. How do I re active chkdsk as he wants me to restore which I can't?

  I used the free registry repair recommended by c-net

  original title: re enable check disk

  Hello

  Follow the steps mentioned below and check if the problem persists.
  File system (CFS) Checker
  SFC tool scans system files and replaces incorrect versions of system files by using the correct versions.
  To run the System File Checker tool, follow these steps:
  (a) click Startand type cmd in the box start the search.
  (b) click on cmd in the list programs, and then click run as administrator.
  If you are prompted for an administrator password or a confirmation, type your password or click on continue
  (c) at the command prompt, the following line and then press ENTER:
  sfc/scannow
  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7?
  http://support.Microsoft.com/kb/929833
   
  Hope this information helps.

• Send not working error "connection to the server has been lost.

  Original title: Email does not.

  Email on my ipad has worked without problem for the last year. All of a sudden I see a message that says that the connection to the server was lost. I can still access the internet, but from my computer laptop I see the same problem, no new messages are to come email. There is a general problem with email?

  Who is your provider of mail service?

  If you use Outlook.com (if you have an e-mail @outlook, @live, @Hotmail, or @msn), please visit this page for current known issues: http://status.live.com.  Outlook is currently having a problem syncing with mobile devices like phones or iPads.

  This page will be updated when the problem is resolved.

• I have a problem loading with my iPad Air2.  I used other cables and Chargers but still doesn't load.  I plugged the iPad to iTunes and a DFU after he took a few hours that the iPad has been completely restored and apps reloaded.  In addition to the

  My iPad will not normally charge.  I tried different cables and Chargers.  I plugged the iPad to iTunes and reset a DFU.  After only a few hours the iPad finished reloading all software and reloaded new apps, it had also charged the battery but the problem remains, I still can't load the iPad normally.  Any help out there?

  There are very few things that keep loading an iPad. Some of these (other charger plugged into a good outlet, different cable) you have already tried. Others are:

  1 dirt, lint or fuzz in the port of loading of the charger or the iPad. Check and clean carefully if necessary.

  2. a software failure. Reset the iPad. Press and hold the Home button and the sleep/wake button until the Apple logo appears. Then release the button and let the appliance restarts. You lose no data by doing this. It's like a restart of the computer.

  3. failure. Make an appointment at an Apple store to have a technician look at your device. Or contact the Apple Support.

• I can't create the flash apk as an error that says "the application has been packed with a captive runtime.

  Hi community, Im trying to make my first apk with Adobe Flash (it's a file very easy) and this error is apperaing all time;

  

  I changed a lot of options in "Android application" but it does not work. Can you help me?

  Thanks!

  This is just a warning.  You can ignore it.

• End of the stream has been reached error CS4

  After that then transcoding the main video file during construction, still prepares "Audio planning for the film" in which case the error 'end of the stream has been reached' pop-up window appears and the burn fails later. There is no errors within the project and I burned the project successfully on a DVD with no errors in the past. The only changes is this time a re encoding of the video file (uncompressed AVI 1920 x 1280 bit depth max), a change in the video vignettes for the chapter selection pages and a tweeking of the chapter points. Because the video file is so large, I delete the previous AVI file and export using the same name to create the links of approriate. I read that audio compression is the main cause of this error, however, I did nothing related sound between versions of the DVD. How can I fix this error?  Thanks in advance.

  It is possible that your Audio stream is longer than the video stream. This can cause problems, even if it's only longer by a unit Audio, or both.

  I always begin (problem with locking DD 5.1 SS) my video with silence and always end my Audio, about 1-2 seconds, before the end of the video stream.

  Can you tell us all about your Audio and video streams, and how you in yet?

  While he's a suspect, probably, it would not be the only suspect. More information will be useful in ruling out, or focusing on the best way to fix things.

  Good luck

  Hunt

• 0xC000021A {fatal system error}, the initial session process or the process of the complete system in unexpected ways with the blocking state 0 x 00000000 (0xc0000034 0x001008ac) the system has been halted

  Hello! I got this message from malware (I clicked to delete) in surfing on firefox and after awhile the explorer.exe closes with an error. I try to open the Task Manager and it says explore cannot be found!
  I rebooted and then I got this message "0xC000021A {fatal system error}, the initial session process or the process of the complete system in unexpected ways with the blocking state 0 x 00000000 (0xc0000034 0x001008ac) the system has been halted" and can't get anywhere.
  I can't even go in safe mode, the same error messages appears.

  Hi James,

  You could try the Startup Repair to see if it solves the problem:

  http://Windows.Microsoft.com/en-us/Windows-Vista/startup-repair-frequently-asked-questions

  Chris
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Hello, I have a problem and cannot complete the installation of the creative cloud, signature of the photographer, has been convfirmado and I can not download some applications, the latest CLOUDS INSTALLATION GIVES ERROR 201, I DO NOT KNOW HOW to RES

  Hello, I have a problem and cannot complete the installation of the creative cloud, signature of the photographer, has been convfirmado and I can not download some applications, the latest CLOUDS INSTALLATION GIVES ERROR 201, I DO NOT KNOW HOW to SOLVE IT MORE.

  Error 201 & 205 & 206 & 207 or several U43 errors

  -https://helpx.adobe.com/creative-cloud/kb/download-update-errors.html

• The backup has failed. An error has occurred. The following information can help you resolve the error: the request has been aborted. (0x80099704D3)

  Hello, I am running Windows Vista Home Premium and trying to make Windows backup on DVD, I was able to cross 5 DVDs then it asked me to insert the DVD successfully n ° 6 I did and he never finished and I got this error:

  The backup has failed. An error has occurred. The following information can help you resolve the error: the request has been aborted. (0x80099704D3)

  The DVD I have are DVD so I can't rewrite over and over again. Can I somehow he pick up where it left off to complete my backup?

  Help! Thank you

  Lisa

  Hello

  -No, I don't have third-party backup programs installed.

  -J' tried using another disk backup, but it started it count once again as "disk 1" yet I had left off to "drive 6"and I couldn't tell if he has taken over where I left off or starting on even once, I don't want to do because I can't rewrite on my DVD. , because they are disposable.

  Because I needed to achieve this, I advanced and bought more DVD and will continue to backup even if I do not know where she had stopped. I think I can say that it not continue starting above and to the right.

  I think that the problem might have been that DVD #6 was bad, as he had a scratch on her, even if it was new out of the envelope.

  Software AV is not the issue, I am able to do backup, I wanted to just be able to pick up where I left off, as opposed to duty again since the beginning of my documents again. I just wish that Windows backup has been a little easier to use, in particular the fact that it is not "tag" my files to show who we are it is already saved, just like other software, (ex Mozy), which is very useful. And be able to choose what files I need backup rather than being limited to simply choose the 'file type '...

• Try to buy the trial period in a different e-mail - message error "error in your account order has been registered for another country. Please log out and log in with an existing account for this country. OK ".

  Try to buy the trial period in a different e-mail - message error "error in your account order has been registered for another country. Please log out and log in with an existing account for this country. OK @.

  Hi boags2014,

  Please refer to this link and get to know the alternatives for the same:

  How to complete a purchase when I get an incorrect error 'country '?

  Kind regards

  Ana Maria

• Source:-elxcna (adapter Emulax CNA) event ID:-129 error:-\Device\RaidPort1, restore the device, has been published.

  Hi all

  Source:-elxcna (adapter Emulax CNA)
  Event ID:-129
  Error:-\Device\RaidPort1, restore the device, has been published.
  Server:-Server Rack, Windows 2008 R2
  Installed application:-installed Backup tool and IBM tape library connected by Cisco nexus switch

  Summary:-each time the backup tool initiating any SCSI command etc. for library of tapes, just after a few minutes in the event log, server shows "restore the device, \Device\RaidPort1, has been issued." and the tape library configured in backup tool disconnected from the physical tape library.

  Up to now steps below was taken but no luck:
  1. test Unit Ready has been disabled in the registry
  2 adapter ANC, fresh of zoning has been replaced.
  3 firmware and driver from the adapter of the ANC has been updated.
  4. timeout was defined according to the guidelines of this document:- http://blogs.msdn.com/b/ntdebugging/archive/2011/05/06/understanding-storage-timeouts-and-event-129-errors.aspx

  Comment:-26 fev 12:00 Am, I put to tape library firmware update and then we got
  This 129 February 26 event id error 03:00.

  Need help? :)

  Hi SabarnaDeb,

  Thanks for posting your query in the Microsoft Community Forums.

  As the question is limited to Rack in Windows 2008 server, it is better suited for the IT Pro TechNet public. Please ask your question in the Forum on TechNet Support.

  http://social.technet.Microsoft.com/forums/en/category/WindowsServer

  I hope it helps. If you have any questions about Windows in the future, please let us know. We will be happy to help you.

• System Restore error: "the changes to the G: drive after this point cannot be reversed, because the drive has been either excluded from monitoring system restore or has been disabled or deleted.»

  I had some problems with my computer recently I knew could be solved with the system restore.  Then I went into system restore and went to a restore point that was a few weeks back.  After I clicked on it and pressing the ok button, the following message appeared: "the changes made to the G: drive after this point cannot be reversed, because the drive has been either excluded from monitoring system restore or has been disabled or deleted.»  I let it continue and do the restore.  My computer has rebooted and came up with an error in system restore that says restore failed.  It's the same thing with other restore points.  I don't know why I get this error because I not made any changes to this hard drive except for copy of a document word on him.  I thought that the System Restore monitors removable disks.  Anyone know what is happening here and how I can get the restoration of the system to operate without the mistakes to come?

  I have Norton.  Disable the Tamper Protection works.  I also noticed that since the G: drive was a portable hard drive, System Restore wanted to exercise oversight.  He wants to monitor all hard drives.  Turn on external and portable hard disks prevents tracking system restore changes to the readers.  I don't think anyone would have the system restore review external drives anyway.  It is not necessary.

• c000021a error fatal system ended unexpectedly with a status of 0 = oxc0000135 (0x00000000 0x00000000) the system has been shut down.

  This error is repairable? When I turn on my computer market, I always blue screen and error message. I do not see that my mouse shows thanks

  Mary

  Most of the errors are correctable. It's just that the BSOD errors are usually harder to fix than many others. Two reasons for this. One is that the system is usually more difficult with the result that the investigative process is hindered access. The other is that the initial error report indicates only the general nature of the problem and not the specific cause. If the system has been activated to provide a more detailed memory dump reports they can be analyzed. The problem for most users is that they do not have the computer skills to take on the task.

  Move to the specific problem you have. The document in the link below gives tips on the clues or pointers for the bug check code: 0xc000021a

  http://msdn.Microsoft.com/en-us/library/ff560177 (v = VS. 85) .aspx

  Please answer a few questions.

  1 how long have you had the problem?

  2 do you have added or removed any hardware or software during the period, shortly before the problem occurred. If Yes please provide details.

  3. are you able to access the computer in safe mode without the error occurring? My second link provides details on how to access safe mode if you have not done this before.

  4. your computer is a desktop or a laptop?

  5. What is your computer brand and model?

  6. what you precisely through a Windows XP CD? Not all computer manufacturers provide a CD. Your answer to question 5 could lead me to discover an alternative so you worry if you do not have a CD.

  The link following gives information on the Menu Options, Advanced Windows, you can try the last known good Configuration suggested in the first link I have provided.

  http://support.Microsoft.com/kb/315222

  Hope this helps, Gerry Cornell

• c:000021 has unrecoverable system error. The system process window logon ended unexpectedly with a blocking ststus 0x00000000. The system has been shut down

  c:000021 has unrecoverable system error. The system process window logon ended unexpectedly with a blocking ststus 0x00000000. The system has been shut down

  Pls teach the procedure for resolution of the problems of this error message.

  Hi mac62sg,

  Remember to make changes to the computer before this problem?

  You can follow the steps mentioned in the article below

  How to solve an error "STOP 0xC000021A.

  http://support.Microsoft.com/kb/156669

  Important : this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows
  http://support.Microsoft.com/kb/322756/

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• cannot follow the links-error message said "this operation has been cancelled due to restrictions in effect on this computer"

  cannot follow the links-error message said "this operation has been cancelled due to restrictions in effect on this computer

  Hello

  1 are. what links you referring?
  2 are. links to which application you referring?
  3. what browser do you use to open the links?

  Your question does contain all the required information necessary for us to help you. Please re - write your question, this time make sure you have all the information necessary and we will try to help.

  http://support.Microsoft.com/kb/555375