Error: "you don't have permission to access this folder. ' Click on continue having access to this folder continuously ".

Original title: cannot access files on a folder on the drive hard usb after you have turned off sharing on a network.

About a week and a half, I have set up my external hard drive usb to share on my network domestic as well as my brother could access some files on his laptop computer.  I've been playing with the security of some of the files on the hard drive and made sure that he could not access some of them.  I don't remember exactly what I did unfortunately.  After I had changed the security access, I was still able to access all files and my brother could not access it.  He got the files on the hard drive and I turned off my computer.  A few days later, I tried to access the files that I had limited and I was stuck.  When I went back in the drive to recover some files, I received an error "you don't have permission to access this folder.  Click on continue to have access to this folder permanently. "When I click on continue that another dialogue box comes up saying"you refused permission to access this folder.  To access this file you will need to use the Security tab. "I click on the link to Security tab and another dialog box appears asking"to continue, you must be an administrative user with permission to view this object's security properties.  Do you want to continue? "I'm obviously the administrator because I have this computer and I'm the only account on it.  From this point, I don't know what I do or what I'm supposed to do to recover my files.  I played a bit with a couple of things and I was able to get into certain folders, but its an extremely long process that I don't have the time for.  A side effect of which in fact so I can see the files, is that for any movie file, I try to access it, I get an error.  When I try to open it with Windows Media Player, I get the error "Windows Media Player cannot access the file.  The file may be in use (which is not the case), you won't have access to the computer where the file is stored (which is not supposed to because the computer on which it is stored my personal computer), or your proxy settings are may not be not correct (what?). "If I try to use another program like VLC media player, I get a similar problem where an error comes up saying that it was impossible to access the file.  I can see the file and see the properties but I am unable to actually see the film.  I can't move the file anywhere because I don't have administrative rights.  I'm under Windows 7 Ultimate, and if someone could help me please, that would be greatly appreciated.

Hi Ridley,

I see that this problem is old enough but you (or others) may have problems with it. Here's what I did:
-Got to your hard drive and right click on the folder that is causing all the trouble.
-Click on properties.
-Click on the Security tab
-Then click on advanced
-You will see a window with a few user names. Now click on owner in the tabs above.
-Click on edit, then select the user name you want to open the folder and don't forget to tick the box that says "Replace the owner of subcontainers and objects", then click on apply.
A pop will come which says something like "You have replaced the property for the selected records" or something in this way. It worked for me and I hope this post is helpful for some people.
Nina

Tags: Windows

Similar Questions

  • Connection error - "you don't have permission to access to the DPS.

    Hello

    Tell me why I can't access dashboard DPS 2015? Get the error 'You don't have permission to access the DPS'... I can access the old version of the table edge DPS but thought I would go to a new Hey Presto I can't access it with my personal adobe ID or my very frustrating work, adobe ID!

    It looks like that your ID Adobe is not one attached to the master account in your DPS license. I suggest to call the business support, they should be able to figure this out for you.

    Neil

  • Error "you don't have permission to access \\Mike-PC\c. Contact your network administrator to request access." When you try to access a computer on the network

    Original title:

    There are three computers in my office. Both run Windows 7 Edition Home Premium and the third is running Windows 7 Professional.
    I am trying to allow access to files on the computers of Home Premium. I go to 'Network' and open the other computer, but he said "You are not allowed access. \\Mike-PC\c contact your network administrator to request access." I went to Mike-PC computer to 'Share' this folder then joined the homegroup even / working group and everything in 'Advanced sharing' in the 'network and sharing Center', but it does still not activated.

    The Professional Windows 7 computer successfully ' "shared folders and the other two computers can read / write files, but not the other way around.

    Any help would be greatly appreciated.

    Hello

    1 are these computers using a homegroup or working group?

    2. were you able to share files earlier?

    3 have had it all changes to computers, before the show?

    Method 1:

    Refer to the suggestion provided by Jack MVP on January 25, 2011, in the following link.

    http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-networking/you-do-not-have-permission-to-access-pcname/baa06630-4d3d-4ba2-837a-b087bd21cdb3

    Method 2:

    Disable the firewall and security software and check.

    http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software

    http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-Firewall-on-or-off

    Note: Runs the computer without antivirus software or firewall is a potential threat to the computer; don't forget to activate the security software after completing the troubleshooting steps and after you have identified the problem.

  • you don't have permission to open this file, contact the file owner or administrator to get permission

    My windows\system32 folder, I cannot access some files in this folder.  I recently installed a monitoring program on my laptop and it is necessary for me to admit that some of the files in the system folder of 32 in April for the antivirus program.  Whenever I try to add one of these files, I get this error "you don't have permission to open this contact the file owner or administrator to get permission."  I am the administrator or owner and there is no other user account on my laptop.  Please notify.

    Hi ewingt26,

    I suggest you to take ownership of the files and check if it helps:

    Troubleshoot "access denied" when opening files or folders

    I hope this helps.

  • Receive the "403 Forbidden" error code on a Web site, I've been accessing years. It is written "forbidden you don't have permission to access the/_cqr/login on that server." I can access this site (AOL) on other browsers. Help!

    Receive the "403 Forbidden" error code on a Web site, I've been accessing years. It is written "forbidden you don't have permission to access the/_cqr/login on that server." I can access this site (AOL) on other browsers.

    I emptied my cache.  I rebooted Firefox.  This is my email website - never had a problem before.  I am able to access it on Safari.  I even tried the simple address (rather then my bookmarked login address) - still got the same error message!
    

    I have the same problem: it is written ' forbidden you don't have permission to access the/_cqr/login on that server. " I can access this site (AOL) on other browsers. After that I connected to AOL, I get this message. then I go to the address line and delete everything after than the aol.com and her and then press ENTER. then, I'm registered and can read my emails. How can we solve this problem?

  • System error message -"windows cannot access the specified device path or file. You don't have permission to access it.

    Hello

    Can help you. Had problem with safety messages and now I can't open any programs, get message "windows cannot access the specified device path or file. you don't have permission to access"how to restore the system to clear the message

    No sound as I wrote it. But I've sorted it by running Paretologic Data Recovery

    Thanks for your response

  • Access to the file is denied. You don't have permission to access the file C:\PROGRA~1\Office14

    Hello

    I created a new e-mail account and fails my.  Running Microsoft Office 2010.

    When you open outlook, I get the error:

    Access to the file is denied.  You don't have permission to access the file Email C:\PROGRA~1\Office14\*** address is removed from the privacy * address email is removed from the privacy *.

    Cannot open your default e-mail folders

    Click Help and I get the following message:

    This error can occur if you attempt to run Outlook in a Terminal Services session when the Outlook offline (.ost) data file is used by the console session.

    To access this instance of Outlook, exit the current Terminal Server session, and then start a new session using the following run command in Microsoft Windows:

    mstsc.exe/console you must be an administrator on the computer that accesses the console session. You can not access a console session of a computer that is running Microsoft Windows XP Home edition. But you can do this from a computer that is running Microsoft Windows Server 2003, Windows XP Professional, Windows Vista, or Windows 7.

    For more information, see article 826488 in the Microsoft Knowledge Base.

    You must make sure that your e-mail records are kept in a place outside system such as C:\Program Files folders. It is a restriction of the UAC.

  • Access denied you don't have permission to access the Apple Forum

    This is the second time what is happening:

    I connect and if

    I'm changing the avatar in the communities of Apple Support,

    suddenly, I get this message

    Access denied

    You don't have permission to access the 'http://discussions.apple.com/welcome' on this server.

    Reference #...

    and I can't access the forum apple more, each page get access denied.

    Then I clean the caches, history and wait a while, and then I can go back in

    No idea what I'm doing wrong!

    You can't make an avatar custom, until you reach level 3

    https://discussions.Apple.com/static/Apple/tutorial/reputation.html

  • Forbidden - you don't have permission to access on this server

    Recently, I cloned git a customer Web site and I need to work on that, but when I try to open it via mamp or ampps a message appears:

    Forbidden you don't have permission to access the 'websitename"/application/index.html on this server.

    I did extensive research and everyone says to change the permissions on httpd.conf , but nothing happened. I tried to reinstall and nothing more. If I navigate through the terminal in the folder of the Web site, I have all the permissions.

    Does anyone have a solution?

    It is difficult to understand your configuration, but you try to run the web site locally? If so, the url is localhost/websitename/application/index.html or whatever the path to the root of your document...

  • Shared folder error "you do not have permission to access the file or folder you are trying to access to.

    Original title: shared folder

    try to share files and folders between my laptop and my pc... When I try to access partitions shared between them = I got this msg: "you don't have permission to access the file or folder you are trying to access. Contact your network administrator to request access"can u help?

    Hello

    Follow these steps:

    Step 1: Make this file and printer sharing is enabled, computers.

    Follow the steps listed in the link below to check the parameters and the essential elements to share files over the network:
    http://Windows.Microsoft.com/en-us/Windows7/file-sharing-essentials

    Also check if network discovery is enabled, the computer. Steps to follow:

    i. click on Start, click on Control Panel.

    II. Select network and sharing Center

    III. Select change advanced sharing settings

    (IV) in respect of network discovery, select Enable network discovery

    Step 2: check the sharing permission on the shared folder.
    http://Windows.Microsoft.com/en-us/Windows7/share-files-with-someone

    Step 3: you can also try to disable your firewall program and security and then try to access to the shared folder. Make sure that you activate it if this step does not help.


    Note:
    Antivirus/Firewall software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

    In addition, see these articles:

    http://Windows.Microsoft.com/en-us/Windows7/networking-home-computers-running-different-versions-of-Windows

    http://Windows.Microsoft.com/en-us/Windows7/why-can-t-I-connect-to-other-computers

  • "You don't have permission to access to" a computer - Windows 7

    Now, I have 3 laptops in my house.  We're on Windows 7 (let's call it W7) and two are on Vista (we'll call V1 and V2).  On my Windows 7, I can connect (via the network - all PC use the same Linksys wireless router) v1 without problem and see shared files, but I can't connect to V2.  I get the message "you don't have permission to access \\PCName."  Now if I put in place a different id user on W7, I can access the V1 and V2.  I need to stick with my original if possible user id, because this is where I've already implemented a large number of programs that I need for work.

    Any ideas on what could be going on with my original user id?  He worked two weeks ago, although I added a few programs as I finally tried access V2.  Thank you!

    You can 'stick with your original user "; just add it to the machine of V2. See point c below for more details:

    Problems sharing files between computers on a network are usually caused by 1) a misconfigured firewall or a firewall neglected (including a dynamic firewall in a virtual private network); or (2) inadvertently run two firewalls such as the firewall of Windows and a third-party firewall. and/or (3) do not have accounts to the same users and passwords on all computers in the workgroup. (4) tries to create actions where the operating system does not.

    In Windows 7, go to control panel > everything in Control Panel > network and sharing Center. Click on "change the advanced sharing settings. You don't want to use the residential group unless you have all Windows 7 machines. If you do and you want to use the homegroup, see Windows 7 Help & Support. Otherwise, in sharing advanced:

    Discovery of plug in the network
    Open the files and printers sharing
    Turn on the sharing section Public folder sharing
    Plug the password protected sharing

    A. configure the firewall on all machines to allow traffic to local area network (LAN) as being approved. With the Windows Firewall, turning on window file sharing and printer as the above will take care of that for you. If you are not running a third-party firewall or you have an antivirus/security with its own firewall component program, then you're fine.  With a third-party firewall, I usually set up the allocation of LAN with an IP address range. E.g. would be 192.168.1.0 - 192.168.1.254. Obviously you would substitute your correct subnet. Refer to the safety of any third party program or the user forums for how to correctly configure its firewall. Do not run more than one firewall. DON'T STOP FIREWALLS; CONFIGURE THEM CORRECTLY.

    (B) to facilitate the Organization, put all computers in the same workgroup. This is done from the System applet in Control Panel, the computer name tab.

    C. create the counterpart of the user accounts and passwords on all machines. You do not need to be logged into the same account on all machines and assigned to each user account passwords can be different; accounts/passwords just need to exist and to match on all machines. DO NOT NEGLECT TO CREATE PASSWORDS, EVEN IF ONLY OF SIMPLE. If you want a machine to boot directly to the desktop (a particular user account) for convenience, you can do this:

    Start > Search box > type: netplwiz [Enter]
    Click continue (or provide an administrator password) when you are prompted by UAC

    Uncheck "users must enter a user name and password to use this computer". Select a user account to connect automatically by clicking on the account you want to highlight and press OK. Enter the password for this user account (when it exists) when you are prompted. Leave blank if there is no password (null). MS - MVP - Elephant Boy computers - don't panic!

  • error message "you don't have permission to open this file. Contact the file owner or administrator to get permission. " I am the administrator and the owner of the file.

    My XP computer crashed and now I have Windows 7 on a new PC.  I downloaded my files from an online backup and now when I try and open a Word document, for example, I get the error message "you don't have permission to open this file.  Contact the file owner or administrator to get permission. "  I am the administrator and the owner of the file. Help!  I am locked out of all my files!

    1. Right click on the folder that you want to take control and then click Properties.

    2. Click the Security tab, click Advanced, and then click the owner tab.

    3. Click on change. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

    4. Click on the name of the person you want to give to the property.

    5. If you want that person to be the owner of the files and subfolders in this folder, select the Replace owner of subcontainers and objects to check.

    6. Click OK.

  • Error "you don't have the appropriate access rights to perform this task.

    Hi gurus,


    I'm under Hyperion Smart View for Office version 9.3.1.0.247 on Excel 2007.

    I encountered error "You don't have the appropriate access rights to perform this task" during its connection. I can't do other work after that.

    The mysterious thing is that when I tried to create another user with the same access rights, I do not encounter this error at all.

    Furthermore, when I tried to connect with another user who does not have this error, disconnects and immediately after, I me re - connect under the id problem with the same error disappears. (However, it reappears after a start of expenses excel place and first login with id problem)

    Personally, I don't think its an issue access rights but more like a bug somewhere. Anyone encountered such a problem before?

    To share your experience on what could be the problem and how to solve it.

    Thanks in advance.


    Rgds,
    Wong

    If you [none] in one of the dimensions, assign read access to members [NONE]. For example, if you have a member called [none] in the entity, you would have to give read access to the [none] member of the entity.

    HTH-
    Jasmine.

  • Try to restore the data file, get error 'you don't have permission to save in this location"in Vista

    I am new to Windows Vista, but relatively competent in older versions. I installed the software on my new desktop computer. I am the only user on this computer and I have administrative rights. I installed the software in the Program Files directory. In the software, there is a folder for the working data file. I now try to 'restore' my data on this new computer file so that I can start working. I get an error message that says "you don't have permission to save in this location. Contact an administrator. "I have considered similar questions on this site and followed the advice to take possession of the file without success. I also created a new folder on the D drive, thinking maybe Vista I just wanted to keep C clean, but it gives me the same message. I can't save to the folder I created. Any advice?

    Program Files is a protected directory. If possible you create the working folder for the data in your user account instead. Is it possible in the options of the program the program in a directory of your user account? Or, if you think that any other user you may need to use this program, you could create the directory Public. MS - MVP - Elephant Boy computers - don't panic!

  • In Windows 7 RC, try to get a local domain, error ' you don't have permission to save in this location. Contact the administrator for approval. »

    I installed Windows 7 RC today and trying the route of a local domain in C:/Windows/System32/drivers/etc/hosts, but get an error when you try to save it with Notepad:

    "You don't have permission to save in this location. Contact the administrator for approval. »

    If I try to save it to my documents and then copy the file over I have another error:

    "You need give the administrator permission to copy to this folder."

    My account is the only account is already an administrator.

    How can I do this?

    See you soon.

    Right click on Notepad, and choose Run as administrator. Click on file, then open, then navigate to

    \Windows\system32\drivers\etc

    In the menu drop-down edit files text (*.txt) to all files (*. *)

    Open the hosts file and change now :-)

    http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/thread/9446377a-42ab-4079-AFEC-e90a097060c0/

Maybe you are looking for