Errors of random generation which disappears if I keep any building

Similar Questions

• Random text boxes disappeared

  Hello

  I have an InDesign document with about 280 pages in it. Text suddenly boxes randomly on the pages disappeared. It's not like the text block is always there either, the whole frame and the text has disappeared.

  

  

  On the first screengrab you can see how the home page has all of his text, but the next page only has his cap. It's random act that disappears is inserted in the last 40 pages of the document.

  What of weird, is that when I try to move the pink image on the page with the text missing the size of changes in direction as a whole. Yet, if I move the image of the light bulb on the page above which has not been affected everything works normally!

  What continues? I think its some kind of glitch, he is now deleted in such a way that I was able to manually in the text boxes on more than 30 pages. This document in the direction of my university degree I need solve the problem.

  Matt

  I was able to take a quick look, and I have good news. I've seen this before, and it is recoverable.

  Your text is still there, but there is only one kind of bug which casuses blocks of text to become large and unselectable infinitley using the usual methods. However, if you place a sprad with a problem and issuing the Cmd + a cammonad to select all, then press and hold e eth Shift button and disable everything that you see on the spread, the text block will remain selected. You can then press Cmd-Y to access the history editor, copy the text and close the story editor windows and press BACKSPACE or delete to delte the existing framework. Now draw a new frame where it belongs and paste the text.

  The graphic elements that have disappeared can probably also be selected in the same way and should be removed and replaced.

  I looked at the file history and noted two things: the file crashed and was recovered on March 25 (probably when the damage began), and you have not updated version 8.0.2 ID. Run the update before you do more work, then try my suggestions on a copy. If successful, export this file to .idml as a "belt and Suspenders" approach to clean, and then save it under a new name (do not overwrite the original file) and continue to work with that one.

• I get errors MxTray.exe and can not understand why. This error appears randomly.

  I get errors MxTray.exe and can not understand why. This error appears randomly.

  Hello thunder1948m

  Do a search on the internet suggest that the MxTray.exe could be a malicious virus that contains malicious programs.

  If you are not running currently a virus scanner, you can download Microsoft Security Essentials for free. It offers protection in real time and protects against software viruses, spyware and other malicious software.
  You can download here.

  I hope this helps.

• Recover my outlook folders of Windows 7, which disappeared when I empied the folder to delete

  Recover my outlook folders of Windows 7, which disappeared when I empied the folder to delete

  Hi Bawmel,

  I understand that you have emptied the folder delete in outlook and now the records are missing in outlook. If I'm wrong please let me know.

  Answer us with answers to the following questions for you help.

  1. using outlook.com or Microsoft Office Outlook?

  2. What are the contents of the folder delete?

  If you use Microsoft Office Outlook, contact the Microsoft Office team using this link: http://answers.microsoft.com/en-us/office

• Install the problem. I get the error output code: 1603 which is not listed on the help site

  Install the problem. I get the error output code: 1603 which is not listed on the help site. All of the solutions that is the meaning?

  Error 1603 http://helpx.adobe.com/creative-suite/kb/error-1603-install-cs3-cs4.html

• ERROR < 38994 > - CSN generation

  Hello

  I have 2 servers 7.0 pre-production Department in a multimaster replication topology with the error:

  ERROR < 38994 > - CSN generation - conn = - 1 op = - 1 msgId = - 1 - error internal csngen_adjust_time: setting limit exceeded; value - 952477, limit - 86400

  This was caused by a change in our NTP servers and now I can't find a way to get this error to go away.

  Check the replication and his work, there is no change in the waiting on any server.

  Also, I tried to restart and reset them via replication agreements, but persistent error.

  Looking at the discussions archived, it is y no way clear to get rid of him.

  Any ideas?

  Hello

  You don't need to delete replication agreements because they do not have any persistent replication status but you must reset with 'clean' data I mean with the data containing all the replication metadata.

  There is an option to export data to LDIF w/o of replication metadata

  -Sylvain

• a script of random generation of positioning within a specific area

  I'm creating a series of online festive banners that have a timeline controlled by AS2 (everything very basic - simple fade and go to the next section). I have from a random generation script to produce an effect of flicker on a stretch of the banner, but I wish that the sparks don't appear that in a specific area of the banner, but used _x, FLF, positioning of the controls do not seem to function as you can see below, I managed to limit, in that they appear but as I said is not the positioning of them.  My knowledge IS limited so I'am wrong - code for the random generator is below

  var numOfSparkles:Number = 10;

  var fadeAmount:Number;

  function attachSparkel() {}

  var t: MovieClip = _root.attachMovie ("sparkle", "sparkle" + _root.getNextHighestDepth (), _root.getNextHighestDepth ());

  t._x = Math.floor (Math.random () *(310-t._width));  / * area * /.

  t._y = Math.floor (Math.random () *(82-t._height));  / * area * /.

  t._xscale = t._yscale is Math.floor (Math.random () * 50) + 80.;

  t.fadeAmount = Math.ceil (Math.random () * 15); / * fade speed * /.

  t.onEnterFrame = function() {}

  This ._alpha = this.fadeAmount;

  If (this ._alpha < = 0) {}

  delete this.onEnterFrame;

  attachSparkel();

  }

  };

  }

  for (i = 0; i < numOfSparkles; i ++) {}

  attachSparkel();

  }

  If you must limit the spark of a more specific area then you must identify the minimum from value and the additional random value is added to the...

  var xmin = 0;

  var xmax = 310;

  var ymin = 0;

  var ymax = 82;

  t._x = xmin + Math.floor (Math.random () * (xmax - xmin - t._width));  / * area * /.

  t._y = ymin - Math.floor (Math.random () * (ymax - ymin - t._height));  / * area * /.

  The code just show will duplicate what you have already until you change the values of the min/max variables.

  [edited on behalf of 4th OK variable - is wrong to repeat "xmax"]

• I am running Windows 7 and noticed that Windows updates did not work. The parameters are defined for the update every day. When I went to update manually returned an error WindowsUpdate_80070017. MSFT site was no help. Any recommendations?

  I am running Windows 7 and noticed that Windows updates did not work. The parameters are defined for the update every day. When I went to update manually returned an error WindowsUpdate_80070017.  MSFT site was no help. Any recommendations?

  Since neither updates Jan - 10 have installed, I'm going to hand you Support MS in the hope that they can resolve the problem. See below.

  That being said, is an interpretation of the 80070017 - cyclic redundancy check error "a device attached to the system does not work," which suggests that a hardware problem might be the cause of the error (although I must say that it is a very low possibility in this case).

  Good luck!

  =======================

  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• I can not receive emails, above indicates code error whenever I try to open the trash, appreciate any help.

  I can not receive emails, above indicates code error whenever I try to open the trash, appreciate any help.

  To help you effectively, we need to know exactly which e-mail system you use.  You can see the differences here

• I have a request in my Firefox Options, which I can't remove any help would be great

  I have a torrent called Bitlord download which I removed in my control panel - but it seems that it's still there in my Applications Options which I can't removed - any help would be great

  Hello liz1411, also check if you have something related to Bitlord (like toolbars) in the Firefox Extensions and remove it, get Firefox button (the orange button at the top right) > Add-ons - > Extensions.

  Thank you

• Tried to use iTunes to restore iPhone 5s, but the 17 error happens: "this device is not eligible for the requested build". No problem to enter the mode of recovery, apple server and the internet. Help?

  I tried to use iTunes to restore my iPhone 5s, but the 17 error happens: "this device is not eligible for the requested build". No problem to enter the recovery mode, connection to the apple Server (the software update download was complete) and internet connection. Help? I do an Apple store to restore?

  Error 17 refers to network problems. Take a look at these articles and try the suggestions:

  Solve the iOS update and restore error in iTunes - Apple Support

  Get help with iOS update or restore errors - Apple Support

• Drive external hard USB - cela used to work now I get an error message = "this device cannot start. (Code 10) "Any suggestions?

  Drive external hard USB - cela used to work now I get an error message = "this device cannot start. (Code 10) "Any suggestions?

  Hello

  I suggest to refer to this link and follow the steps in this link and check if that helps:

  http://support.Microsoft.com/kb/943104

  It will be useful.

• XP Pro error message "requested lookup key is not found in any active activation context" appears

  XP Pro error message "requested lookup key is not found in any active activation context" displayed when some Start Menu options are selected or whatever it is run from command run. IE will not start. Windows Update ran at the last stop, but site selection are not displayed. Tried to repair XP Pro upgrade disk. Reinstalled SP3. The IE7 installation fails during the installation of updates. Cannot find the Activation Assistant. Help!

  This should certainly guide you in the right direction http://forums.techguy.org/web-email/839381-solved-requested-lookup-key-not.html

• I now have two copies of each song on my computer. An mp3 and a mp4. Which one should I keep?

  Original title: mp3 or mp4?

  I now have two copies of each song on my computer. An mp3 and a mp4. Which one should I keep?

  Hello

  Keep both until you can decide if you want only one. The compression ratio and other factors
  It will be different.

  Good Codec will allow you to play MP4 in Windows Media Player.

  Determine if 32 or 64 bits.

  Start - type in the search box-> Winver find upstairs and double click on - check version

  After that the foregoing, add codec - get these 32 bit if:

  -Free - CCCP also get free tool of insurgents
  http://CCCP-project.NET/
  http://www.freewaregenius.com/2007/02/09/CCCP-codec-pack/

  FFDSHOW - free
  http://sourceforge.NET/projects/ffdshow/

  Check here:

  Plug-ins for Windows Media Player
  http://www.Microsoft.com/windows/windowsmedia/player/plugins.aspx

  ============================================
  ============================================

  If 64-bit:

  Read this 1st and go that route, or use the one below.

  http://www.Vistax64.com/sound-audio/152850-Vista-codec-pack-32bit-64bit-Media-Player-codecs.html

  --------------------------------------------------------------------

  If 64-bit Vista - can run WMP in 32 or 64 bit mode.

  Or try these: download - SAVE - go to the place where your put them RIGHT CLICK – RUN AS ADMIN.

  For 32-bit use these - OR the 32 bit ones listed above which I prefer.

  K - Lite Codec Pack 6.2.0 (or newer)
  http://www.codecguide.com/

  Use them for 64-bit:

  K - Lite Codec Pack 3.7.0 (64-bit) (or newer)
  http://www.codecguide.com/

  -------------------------------------------------------------

  You know that you use WMP 32 or 64

  Change, change or set 64 - Bit Windows Media Player 11 (WMP11) in Windows Vista x 64 as default
  http://www.mydigitallife.info/2007/01/19/switch-change-or-set-64-bit-Windows-Media-Player-11-WMP11-in-Windows-Vista-x64-as-default/

  ------------------------------------------------------------

  VLC needs, of no use so usually Codec as a backup when asked to support associations of files just say no.

  VLC - free
  http://www.videolan.org/VLC/

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• I have a total of cells which can go up to any amount.  I also have a Grand total of cells using the total amount of cells, BUT it must be a total which is &lt; = 20

  I have a total of cells which can go up to any amount. I also have a GRAND total of cells using the total amount of cells, BUT it must be a total which is < = 20.  So in other words. He TOTAL = 31 total can only = 20.   If the TOTAL = 8 total would equal 8.

  Thank you!

  Custom calculation script for "GRAND total":

  var total = + this.getField ("TOTAL") .value;

  Event.Value = Math.min (total: 20);