Errors when you try to start the listener HTTP (Oracle Developer Suite 10 g)

Similar Questions

• Error when you try to start the Medal of Honor Allied Assault: a problem caused blocking the program works correctly. Windows will close the program and notify you if a solution is available.

  Medal of honor allied assault has stopped working?

  This message seems to me when I start the Medal of honor Allied:

  (a problem caused blocking the program works correctly windows will close the program and notify you if a solution is available)

  Hello

  ·         How long have you been experiencing this problem?

  You can reduce hardware acceleration and check if the problem persists:

  1. right click on the desktop and choose personalize.

  2. click on display settings.

  3. in the display settings window, click on advanced settings.

  4. display the Troubleshooting tab.

  5. click on change settings.

  6 reduce hardware acceleration.

  Also try the procedure from the following link: http://windows.microsoft.com/en-US/windows7/Fixing-game-performance-problems

  Also try to check if the game works the clean boot: http://support.microsoft.com/kb/929135

  NOTE: make sure that you start the computer in normal mode after troubleshooting is done

  You can also post your questions on: http://support.ea.com/

• get the fatal error when you try to start Windows 7 Easy Transfer...

  get the fatal error when you try to start Windows 7 Easy Transfer... what should I do?

  Hello Jo,.

  Thanks for posting your question on the Microsoft community.

  We need more information about the issue so that we can help you better.

  What is the full error message or code when you say, ""getting fatal error when you try to start Windows 7 Easy Transfer? '"

  Thank you for details on the issue.

  This problem may occur because of damaged or missing Windows files.

  I suggest you run the system file checker (SFC) and see if it helps.
  Reference:
  Use the System File Checker tool to repair missing or corrupted system files
  https://support.Microsoft.com/en-us/KB/929833

  System File Checker is a Windows utility that allows users to find corruptions in Windows system files and restore the damaged files.

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• Error 1068 when you try to start the WIA service after the installation of the W7 SP1

  Original title; Error 1068 when you try to start the WIA service after the installation of the W7 SP1. The scaner to my Epson Workforce 633 all-in-One printer does not work after that.

  SCANeR to my Epson Workforce 633 all-in-One printer does not work after the installation of the W7 SP1. I contacted Epson support and they told me I had to contact MS support to get help this isue. The problem is that something is not letting the WIA service to start and I am getting error 1068 when you try to start the WIA service.

  Hello

  Method 1: Try to uninstall and reinstall Epson drivers and related software.

  Visit our articles to do the same below:
  http://Windows.Microsoft.com/en-us/Windows7/uninstall-or-change-a-program
  http://Windows.Microsoft.com/en-us/Windows7/install-a-program

  Method 2: Also scan SFC (System File Checker) on the computer.
   http://support.Microsoft.com/kb/929833

  Hope this information helps.

• Windows XP SP3: Access denied error when you try to change the beginning upward in MS CONFIG. Director of applications but I am the administrator.

  original title: access denied errors when you try to change the beginning upward in xp sr CIP 3 msconfig. I am the administrator, please the administrator

  I am a user with privileges under windows xp pro service PAC 3. I recently received an access denied error message acusing me of not being the administrator when I tried to limit the start up programs in msconfig. What should I do these changes in safe mode?

  You have scanned your system for malware? It seems its infected with something. Download ccleaner install / run. Then go to tools / startup. Delete the entries that you want here

• Error when you try to set the Parental control 'Unable to set settings for administrators user or unknown users.

  I am trying to set up Parental controls for the user account of my son and I get the following error: error when you try to set the Parental control 'Unable to set settings for administrators user or unknown users.

  I tried to use the administrator account.

  When I ran the System File Check sfc/scannow

  TI completed indicating certain files may be damaged and cannot be repaired and check the convertible bonds. LOG file.

  How can I know which files are corrupted.

  Any other Suggestions on how to fix this user profile?  Do I have a profile that I don't know?

  Hi wimuggss,
   
  Step 1: Disable UAC (User Account Control) and check the result
  See How can I change the behavior of user account control by using the cursor?
  Note: You must restart your computer when you enable or disable UAC. Change levels of notification does not require that you restart your computer.
   
  Important: Enable UAC after you complete the steps.
   
  Step 2: If the problem persists, try to set the parental control in safe mode and check the result. If you are able to apply settings in safe mode, this means that some program is causing this problem, mainly the security software.
  See Start your computer in safe mode
  Kind regards
  Syed - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• get error when you try to lower the java load error 1-4 of 4 0 x 80070643.

  get error when you try to lower the java load error 1-4 of 4 0 x 80070643.

  This forum is for Microsoft Security Essentials.

  You question is with Oracle Java.

  It is recommended to go to www.oracle.com to get help.

• When you try to start the programs of their shortcuts, I always get a window MS-DOS pop up

  When you try to start the programs of their shortcuts, I always get a window MS-DOS pop up.  The header says 16-bit subsystem MS_DOS.  For example, when you try to start Microsoft Word, the message says:

  C:\Documents and Settings\All Users\Menu demarrer\programmes\microsoft Office\Microsoft Office Word 2003.lnk program invalid file name, please check your pif file.

  I can start the program by clicking on any document in my documents file, however.  I know that something is messed up in the registry (we had a bad worm (MS Removal Tool).  However, I can't a registry cleaner to open.  I used a WinXP_EXE_Fix.reg to try to fix the missing exe file.  He has set a number of things, but still will not let me run a registry clean.

  Any help?

  Hello

  Try the following steps:

  1. follow the steps from the link below: cannot open files with extensions such as.exe, .com, and.lnk on a Windows XP computer: http://support.microsoft.com/kb/923077

  2. online virus scanner and check if any malware or virus detected on the computer activity. You can run the scan for viruses online from the link below: http://www.microsoft.com/security/scanner/en-us/default.aspx

  NOTE: Make sure that you select the correct version of the operating system before downloading the scanner)

• Get 800b0100 error when you try to install the update KB905866 (Mail filter spam for x 64 systems) in Vista

  Get 800b0100 error when you try to install the update KB905866 (Mail filter spam for x 64 systems). It keeps failing even though I followed the steps all the recommended (in aid) and installed some other stuff.  Tried several times but nothing helped.  I saw a recommendation to install a Wups2.dll file but do not know if I should do it because the recommendation is for Windows XP and I have Vista Home.

  Hello

  I suggest check the link below and try do a SFC (System File Checker) scan and check if it helps.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  I would also say that you reset Windows update components and check if this may help.

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

• Error when you try to play the game: memory access violation

  memory access violation

  I have redownloaded a game that has been previously loaded on my computer, now I get this error when you try to play the game "Memory Access Violation".

  Your sound card that is more than adequate.
  If the game was previously installed and worked fine then maybe it is not been completely uninstalled.
  I suggest you uninstall the game, look in the registry for any left over entries that can refer to the game.

  Then restart and reinstall the game.

  Alternatively, you can try to install in compatibility mode. If the program is not compatible, then you try to install and run the program in compatibility mode.
  Use the following steps:
  (1) right click on the program
  2) click Properties
  3) click on the Compatibility tab
  (4) select run this program in compatibility mode and select Windows Vista or other operating system, the program has been run successfully.

  Check out the link here: make sure to run older programs in this version of Windows
  http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows

  Let us know if that helps.

  Marilyn

• Disabled-Adobe Acrobat 9 Pro on old PC. Implementation error when you try to install the new PC. "Invalid serial number."

  Disabled-Adobe Acrobat 9 Pro on old PC. Implementation error when you try to install the new PC. "Invalid serial number."

  Please see the following documents.

  1. Error "invalid serial number". Acrobat 9 | CS4
  2. Invalid serial number error

  Let us know if that helps.

• Error when you try to view the application latencies

  I'm not able to get see Planner to latencies report application series of tests with multiple virtual machines in them. If I run a test that has 3-2 VMs in it while I'm able to view the results of the trial very well, however when I try to run tests with more of that I get errors when I try to view the results. When I try to load the web page results to see Planner, nothing happens, and I get the following error in viewplanner.log:

  2012-10-24 20:16:13, 025 INFO {}
  Unhandled error
  Traceback (most recent call changed):
  File "/ usr/lib/python2.6/site-packages/twisted/web/http.py", line 773, requestReceived
  Self.Process)
  File "/ usr/lib/python2.6/site-packages/twisted/web/server.py", line 127, process
  Self.Render (resrc)
  File "/ usr/lib/python2.6/site-packages/twisted/web/server.py", line 147, in rendering
  body = resrc.render (self)
  File "/ usr/lib/python2.6/site-packages/txjsonrpc/web/jsonrpc.py", line 112, rendering
  () defer.maybeDeferred(function,_*args).addErrback
  -< exception that is caught here >-
  File "/ usr/lib/python2.6/site-packages/twisted/internet/defer.py", line 133, in maybeDeferred
  result = f (* args, * kw)
  File "/ tmp/ViewPlanner/web_interface.py", line 527, jsonrpc_getResultsMap
  File "/ tmp/ViewPlanner/mysql_interface.py", line 571, in getTestAverages
  exceptions. KeyError: 0

  When I try to manually execute the python script statement, it tells me that there is no result for the test.

  I just ran a test locally with 276 VMs, according to viewplanner.log, all 276 VMs transferred their results to the device. Yet I still get this error when you try to view the results.

  I tried to create new images GoldenDesktop and GoldenClient, as well as deployed a new device see Planner and reinstalled all of its agent programs, nothing helps. Anyone know what could be the cause?

  We have seen this issue for large series and I attach a patch file that you can overwrite the/root/ViewPlanner harness directory and then restart the vdiappd service, and then you can give it a try.

  For manual results extratcion by using the report.pyc script, you must use '-j' I ' and '-j' operations if you ran just 1 iteration of the workload.

• Problems of conversion of PDF to MS Word document.  I managed to convert 4 files and now the subsequent files generate a "Conversion failed" error when you try to convert the file.  I have a big manuscript and I separated each chapter to assist with co

  Problems of conversion of PDF to MS Word document.  I managed to convert 4 files and now the subsequent files generate a "Conversion failed" error when you try to convert the file.  I have a big manuscript and I separated each chapter to help the conversion; as I said, the first 4 pieces without problem, then the conversion failure.  I tried to convert the document integer and same result.  Specifically, I bought the feature export to Word.  Please help.  I had initially export the Word Perfect PDF document and attempting to pass PDF to MS Word.

  Hi sdr2014,

  I'm sorry to hear that your conversion process is at a standstill. It seems that the problem is not specific to a single file, you have been unable to convert anything, since the first four chapters of a correct conversion.

  So, let's try this:

  If you want to convert via the ExportPDF site, please sign out, clear the browser cache, and then reconnect. If you use the drive, please choose Help > updates to ensure that you have installed the latest version.

  Please let us know how it goes.

  Best,

  Sara

• Error when you try to install the browser first elements 10 Inspiration

  On the Adobe Premiere elements 10 welcome screen, I get an error when you try to install the browser of Inspiration (IB).

  Sorry, an error occurred.
  This application cannot be installed because this installer has been misconfigured. Please contact the

  author of the support application.

  I have uninstalled/reinstalled the latest Adobe Air. I have connected to photoshop.com while trying to install IB as well.

  OS = Windows 7 64 bit

  Adobe products installed

  Photshop CS5

  Lightroom 3.5

  Thank you

  The team and I worked to create this document on the issue. Can you try the solutions listed and see if it solves the problem?

  Can not launch/install Inspiration browser from the home screen. First 10 items | Win 64 bit

  http://kb2.Adobe.com/CPS/926/cpsid_92680.html

  -Dave

• I get the "Year Error Occurred" message when you try to start the YouTube app on my new Bravia

  Hello

  My KDL50W800C has an internet connection but when I try to start the YouTube app, I get the message 'year Error Occurred. " Not to be confused with a network error has occurred. It says no network.

  Help is greatly appreciated.

  Can't tell from your model number, but if it is an Android TV, try to erase the data on the app:

  Home > settings > Apps > system apps. Search YouTube from the list, select it, select erase data and confirm.

  Restart (just to clear any other issue) - now power press Remote button and try again the YouTube app.