Essbase Service does not appear on the list of Windows Services

Similar Questions

• KB2728973 does not appear in the list, add / remove programs

  Hi, I am using Windows XP Media Center Edition with service pack 3 is installed, and KB2728973 is displayed as being installed on the Microsoft update site, but KB2728973 does not appear in the list, add / remove programs. The rest of July for Windows XP updates appear as being installed on the two site update of Microsoft and adding list / remove programs, it seems strange that KB2728973 does not work. It is important that KB2728973 does not appear in the list of add / remove programs? or do I need to do more to install it? I also tried to manually install the KB2728973, but again, he did not appear in the list Add / Remove programs. I understand that there is a position similar to mine, but I read it, and I realized that the question of the poster was a bit different from mine. I also wanted to take the time to mention that the automatic updates of Windows listed KB2728973 as being installed successfully, but it always seems strange that KB2728973 does not appear in the list, add / remove programs. I also checked in C:\WINDOWS, and there wasn't any folder $NtUninstall to KB2728973. Oh, and Yes, I have "Show updates" checked in Add / Remove programs.   Contribution to this issue would be greatly appreciated.

  It is normal that some updates to not appear in the list of add / remove programs in the control panel for various reasons, but in this case, it will update the entries in the untrusted certificates store then to see if it is installed, you can check if the newly revoked certificates are listed.

  Here is a link to a page that explains the changes he brings (the certificates that have been revoked):

  [url] http://technet.microsoft.com/en-us/security/advisory/2728973 [url]

  Scroll down to the section that has the right:

  How can [B] after you apply the update, I check the certificates in the Microsoft Untrusted Certificates Store? [/ B]

  If you have no events in Event Viewer, you can open IE and click on Internet Options - Content tab - then in the Middle under "Certificates" click on "Certificates" and then click on the arrow to scroll to the right and click the "Untrusted publishers" tab.  You should see all those listed in the MS article here.

  It also creates this key in the registry:

  HKEY_LOCAL_MACHINE\Software \Microsoft\Active Setup\Installed Windows\ {C3C986D6-06B1-43BF-90DD-BE30756C00DE}

  where it lists what Windows Update of roots revoked.

• Toolbar Yahoo appeared without my consent. Can't get rid of it. Does not appear in the list of Add-ons or in the list of the programs installed for uninstall. (Win7; (FFx5) Please help me remove this annoyance.)

  I was asked to update Java. I had a YAHOO toolbar I made and do not want to. I can't get rid of it. It does not appear on the list of Add-ons, not in the list of programs (for uninstall). Could not find anything with Yahoo in the name. I don't want to use the view, as he returns to the display without my consent - I want not gone permanently.

  The Yahoo uninstall instructions help call for, click on the pencil tool (which tool is not found on this toolbar). Firefox instructions say go to the list of Add-ons, but the Yahoo bar is not there. There are several modules of Java, but I don't know what they are and what happens if they are uninstalled.

  Win 7; Firefox 5.0. Yahoo toolbar worm 2.3.8.20110620112826

  Maybe he is disguised as something else. If so please tell me what you need to uninstall.

  Open Firefox-> go in the Menu Tools-> Add-ons-> Extension section-> remove any add-on suspicious you-> restart Firefox

  If above solution doesn't work, try the following.

  Open Firefox-> go to Menu view-> toolbars-> UNCHECK any suspicious entry toolbar.

  Check if it works.

• Why the Satellite L650-116 does not appear on the list of products?

  Why my notebook l650-116 does not appear on the list of products?
  It does not appear even with the auto detects the program located on the site.

  Hello

  I put t know what you mean?
  SATELLITE L650-116 is a European model for Toshiba laptop. But this L650-116 has been published for example in Cyprus.
  You can find the details on the Toshiba Cyprus page
  http://Toshiba.com.cy/pages/en/toshiba_products/laptops/satellite.php?prod=197&cat=2

  In addition the L650-116 belongs to the PSK1JE series if you need drivers, you must choose L650 PSK1JE

  Welcome them

• NETGEAR does not appear on the list

  I'm trying to connect my laptop for wifi but netgear does not appear on the list of names to choose from.

  Can you tell us what model of router you have, for example, R7000? The router is new? Has buttons on the front panel for enabling / disabling WiFi, if so you tried pressing them?

• executable file does not appear in the list of programs

  After installation of my executable it does not appear in the list of all Windows programs. I've built a lot of executable and installers before but this is the first time I see this. The folder is created in the Program Files (x 86) directory and the program performed well when I double-click on the .exe.

  This sw was initially developed with LV10 with WinXP then moved to LV2012 with Win7 64 bit and then to LV2013 and it uses a plugin architecture (I'm still not very familiar with this).

  I also have these following questions:

  1. I don't remember so many folder created after building an exe file (see photo "filelist.png") before moving this application to LV2013, why all these dataX folders are created? (associated with the plugins?). Except for the data folder containing my ini and xml configuration files these folders all contain a single mnu file.

  2 - Why are there some records of pilot instrument included in the compilation? (Agilent, Keithley and Tek) I'm also using other equipment, and they do not appear in the construction. These problems with the build because of their tree VI live I had to either check turn debugging on or off the use of the diagram structure on these screws diagram which is certainly not the right way to do it.

  3. probably the most important, what would be a document of reference on how to create an executable and a Setup program for an application architecture plugin.

  Thank you

  Ben64

  You use LVOOP you use the NI Report Generation Toolkit, which is implemented using OBJECT oriented programming. Already this explains some of the additional folders that you see.

  Other components are of course part of lvlibp (packed project library) and where it will not integrate the EXE itself. Also their dependencies... which may explain support directories (data1, data2,...).

  Referring to other settings, the log file does not help much. So we can not tell you why the installation program does not create a program shortcut in "start > programs". If you check the "shortcuts", you should be able to see if there is a routine in the Setup to create such a link or not. If the parameter is there, but the installation fails to create, it can be connected to the user rights that you use to run the installer...

  Norbert

• Driver VGA Dual-Mode Camera installs but the device does not appear in the list of devices to Windows Photo Gallery

  Driver VGA Dual-Mode Camera installs but the device does not appear in the list of devices to Windows Photo Gallery

  Hello

  I will need to know the brand and model of the device in order to help you solve it.

  You see the device listed in the Control Panel, hardware and sound, scanners and cameras?
  Brent
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• downloaded Inbox, big mistake. -I want to go to Inbox, but it does not appear in the list of programs

  I want to really go to Inbox, but it does not appear in the list of programs, so how do I get rid of him, for free please if possible?

  Hello

  Try the free version of revouninstaller to remove it:

  http://www.revouninstaller.com/revo_uninstaller_free_download.html

• Printer and driver; When I try to add Epson Stylus SX415 he does not appear in the list of printers

  My Epson Stylus SX 415 does not want to play with my windows 7. it did before. Printers on my computer, it has a 410 SX that I can't remove for any reason any. When I try to add SX415 he does not appear in the list of printers of ideas?

  Have you tried to download and use the driver provided by Epson for this printer?

  Windows 7 will install the drivers for some printers, but not all, and in many cases, the software installed does not have full use of the features of the printer.

  Remove printers from the list in the devices and printers sometimes takes awhile, and even a re-boot.  Uninstall will fail if there are no printed documents in the print queue in Windows to be printed.  You must delete this queue first.  There is a troubleshooting printer built into Windows 7 that can help too.

• Delete option does not appear in the list when I right click on any element

  Original title: Please help friends

  

  In my laptop remove option does not work...

  I m not to delete something which in my hard drive laptop because delete option does not appear in the list when I right click on any element...
  Also does not work with the button remove from my Matthew...
  It is the only work when I cut this point and stick to the desktop, now I can delete...
  I also try to install Windows again but the result is the same
  Please help friends if you can...
             
  Thanks in advance

  It is not working...

  I already tried...

  But now my problem has been solved...

• Purchase Adobe Creative Suite 6 Design & Web Premium in 2013 as part of Tech Soup. I downloaded and istalled it. I bought a new PC and want to download/install the program on the new PC. CS6 does not appear on the list of downloads. How can I downlo

  Question: I bought Adobe Creative Suite 6 Design & Web Premium in 2013 as part of Tech Soup. I downloaded and installed. I bought a new PC and want to download/install the program on the new PC. CS6 does not appear on the list of downloads. How can I download the software? I have Tech Soup information and the serial number on the empty box, I received in the mail.

  Available downloadable Setup files:

  • Suites and programs: CC 2015 | CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
  • Acrobat: DC, XI, X | Suite X | 9,8 | 9 standard | 8 standard
  • Captivate: 9 | 8 | 7 | 6 | 5.5, 5 | 1
  • Cold Fusion: 11: 10 | 9.0.2 version 9.0.0, 9.0.1, 8.0.1, 8.0.0, 7.0, 6.1, 6.0, 5.0, 4.0
  • Contribute: CS5 | CS4, CS3 | 3,2
  • FrameMaker: 12, 11, 10, 9, 8, 7.2
  • Lightroom: 6.4|  6| 5.7.1| 5 | 4 | 3
  • Photoshop Elements: 14,13,12,11,10 | 9,8,7 win | 8 mac | 7 mac
  • Premiere Elements: 14,13,12,11,10| 9, 8, 7 win | 8 mac | 7 mac

  Download and installation help links Adobe

  Help download and installation to Prodesigntools links can be found on the most linked pages.  They are essential; especially steps 1, 2 and 3.  If you click on a link that does not have these listed steps, open a second window by using the link to Lightroom 3 to see these "important Instructions".

• Lightroom does not appear in the list of applications

  I'm new to creative cloud and I have a problem with Lightroom.

  I just started a monthly subscription with Photoshop and Lightroom. I was able to download Photoshop very well but Lightroom does not appear in the list of applications. I was able to download a trial version of Lightroom.

  Here is some information on my computer:

  2.26 GHz Intel Core 2 Duo processor

  4 GB 1067 MHz DDR3 memory

  NVIDIA GeForce 9400 M 256 MB graphics card

  Software OS X 10.9.2 (13 C 64)

  imawildgirlaz1 wrote:

  When I open it, I get a window asking me to put the licensed software or continue my 30 day trial.

  What happens when you click on 'license '? If you are prompted for your user name and password to Adobe, just go ahead and enter that and you're all set.

  If asked for a serial number, it is still something the surplus from your previous installation. Try to log out and back in the desktop CC application. If it still does not respond, you may need to use the CC cleaning tool to get rid of the remaining files.

• User ID does not appear in the list of recipients iBot

  I want to send a user an iBot, but this person's user id does not appear in the list select the recipients.
  
  Where this list is generated from? Also, how to make the id of the user appears in the list?

  Hello

  The user must be connect once at least.

  Go--> Ibot--> beneficiaries to choose--> here not able to see the id of the user. Please check it publish to subscription below choose the recipients (here also not able to find the user).

  Note: Try connection surely meets this user on time you will get id user here.

  Hope this helps

  Thank you
  Satya

• Paragraph GroupTitlesIX tag does not appear in the list of bookmarks PDF

  When I do a "save book as PDF' then watch list"Include paragraphs"for one of my books, the GroupTitlesIX tag does not appear in the list. If I open just the index, the GroupTitlesIX tag appears in the list and the index letters appear as bookmarks in the PDF of the index.

  In the book, if I update the index file highlighted, select Format > Document > PDF Setup, the GroupTitlesIX tag appears in the list. But if I highlight all the files in the book, or even a single file in addition to the index, the tag does not appear.

  I generate the index using add it > command Index Standard. I just tried creating a new book from scratch, using models of default FM; generated an index for the book and see the same problem.

  I use p277 FM 8.0. What Miss me?

  Thank you

  B250

  B250,

  FrameMaker is not the analysis of all the documents in a book when they offer paragraph formats to insert into a table of contents or PDF bookmarks. I seem to remember that having the format in the first file of the book is a good idea. Then make a book update before trying again.

  HTH,

  -Michael (who will be more comfortable when writing to beings humans with non-robot names)

• Epson printer driver does not appear in the printer & Scanner window

  I downloaded the latest driver for my Epson Artisan 50 printer OS 10.11.5. I ran the installer, and it seems that the installation was successful. But when I am preferences system-> printers and Scanners and click the + to add the new printer, it does not appear in the list 'Add '. How ca I add the driver to my preferences printers and Scanners?

  Mark Romine wrote:

  How ca I add the driver to my preferences printers and Scanners?

  You do not add a printer driver for printers and Scanners.  You add the printer itself.

  The Epson Artisan 50 is not a printer capable of AirPrint, as shown here:

  On AirPrint - Apple Support

  (I have an Epson taking is an AirPrint printer, and it works very well with OS X 10.11.5.)

  The Artisan 50 printer seems (but not scanner) software in the Apple driver:

  Printer and scanner software available for download for your Mac - Apple Support

  Therefore, follow the instructions here:

  OS X El Capitan: Add or remove a printer