ESX4 starts - but takes at least 20 minutes before I can connect with vsphere client!

Similar Questions

• Windows 7 freeze to the screen of welcome for even more 20 minutes before I can connect to my session

  Hi, im using win 7 ultimate on my computer dell laptop with 4 GB of RAM and I have a huge problem.
  in fact, when I turn on my laptop it freezes on the screen of welcome for 20 to 30 minutes until I can connect to my session.
  I have a defragmenting my hard drive, uninstall all the last microsoft update, do a virus scan, make a check disk and a file system check. But the problem still there.
  Need your help please!
  Thank you

  Please provide a copy of your system information file. Type system information in the search box above the Start button and press ENTER. Select file, Export and give the file a name noting where it is located. Please download your disk from sky to share with everyone and post a link here.

  Please download and share with all copies of your system logs and Application of your event viewer on your sky drive and post a link here.

  To access the system log, select Start, Control Panel, administrative tools, Event Viewer, in the list on the left of the window select Windows and the system logs. Place the cursor on the system, select the Action in the Menu and record all events (the file default evtx type) and give a name to the file. Do the same for the application log. Don't provide filtered files.

  Help with Sky Drive see section 9.3:
  http://www.gerryscomputertips.co.UK/MicrosoftCommunity1.htm

• Help, please! Aspire E5-511-P4LN takes at least 30 minutes for it to start after stop down

  Help, please!  I have an Acer Aspire E 15 (E5-511-P4LN) that I bought online at HSN last September, 2014.  I'm not really sure what happened past.  On the morning of April 10, 2015, I had downloaded the Wakfu game in my computer.  I played the game for two hours, then turned off my laptop around 14:30.  The same day in the night, about 9:30 pm, I started my laptop, but the monitor was blocked to the Acer Logo at least a half hour!  I thought that it must have the game I've downloaded so before going to bed I hibernated just my computer.  When I woke up the next day, it took my computer at least 15 minutes at the start of Hibernation!  Once he showed me the splash screen, there is no problem with the computer's performance.  in any case, I uninstalled Wakfu of my computer when I finally got in my computer.  I even downloaded CCleaner and used clean the registry.  However, today, April 12, 2015, when I started my computer, he remained on the Acer Logo for at least thirty minutes before taking me to the splash screen!  It's just too.  I don't know what else to do.

  strange question.

  the 'fastest' solution will involve a backup of your data and a reinstall of windows.

  If you don't mind not to do, turn off your laptop and turn it on by pressing ALT + F10 to launch Acer erecovery process.

  If she starts always slowly, we try to limit the question on a clean system.

• I can connect with the Administrators account without starting windows in safe mode in win xp pro sp3

  I can connect with the Administrators account without starting windows in safe mode and if yes, how?

  If I ca not, how can I load the graphics in safe mode drivers as all graphical interfaces are not displayed correctly.

  Thank you, Andre

  If XP Pro using the Welcome screen, press CTRL + ALT + DELETE to bring up the classic login box.  In the connection box, type the administrator user name and password. Boulder computer Maven
  Most Microsoft Valuable Professional

• I just changed my internet provider and can connect with two of our cell phones, but the third said no identified network/no access to the internet.

  I just changed my internet provider and can connect with two of our cell phones, but the third said no identified network/no access to the internet.  I tried all of the obvious solutions.  Windows 7

  Original title: unidentified network

  Hello

  Thanks for choosing Windows and thank you for providing an opportunity to help you.

  According to the description, you are having problems with the unidentified network error message.

  Perform the steps from the link below and see if it helps.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-networking/network-connection-shows-that-it-is-connected-but/52e60042-2666-4EAF-80be-193b26db10be

  Answer to us if you are having problems with the unidentified network or any other issue of Windows, and we would be happy to help you.

  Good day!

  Hope this information helps.

• Pavilion A1507UK does not start until left and turned on for at least 5 minutes before trying again.

  Sorry if this is a long post on a stupid problem but it baffled me completely. It started a few weeks ago, that is to say not start when turned on first, but start normally have been left at least 5 minutes.

  My first thought was that the hard drive may be failing, so I bought a new one (same model) and cloned the original using Seagate DiskWizard. The swapped and the fault was still there.

  Then the food. Bought another (identical) and them inverted. No difference, still don't need warm up before boooting. Both power supplies tested A1 on a multimeter.

  OK, so it must be the motherboard. Bought another (identical ECS RC - 410M rev 1.03) a Pentium 4 CPU and new radiator and fan to go with it. Swapped their course and other BIOS of Compaq and not HP, cela worked perfectly, in addition to having to be put on for 5 minutes before you start...!

  Tried original power with the new motherboard - started immediately when first in market but the next morning - no change. Pointing to the motherboard (being hot when we food supplies changed) again.

  The only thing I haven't changed is the memory and the on/off switch (I tried fill the pins on the map and the fault was still there), but that passes all the tests I can throw at it.

  Then I read about the bad capacitors. Found 2 those inflated in the region on the original Pavilion on board voltage regulator and was able to change them for 2 new hats of Nichicon, thinking it was the answer. It wasn't. Return all right, swapped boards is dory hunky apart from the refusal of this computer to start when the first step. Also I can't find a single capacitor bad look on the Compaq Board that shows the same characteristic.

  I am now at the stage that I think that someone else must have met this problem if I now get with almost 2 completely different computers. There must be something really stupid that I didn't think or an amazing series of coincidences if all these bits are bad.

  Help someone?

  Eyemdee, have you tested the memory.  I had almost the same problem when I built my last computer.  Finally, it came down to memory.  I replaced it and everything was fine.  As I said, I would test it before buying more, however.

  If your problem is solved, please click "accept as a Solution.

• My Windows XP laptop does not connect to my 2WIRE router wireless, but do my other laptops. It will only connect with the ethernet cable. What is the problem?

  What I'm doing.

  1. my laptop is a Toshiba XP

  What serial number and model of Toshiba?

  What type of encryption 2wire router uses for now? Type of WEP or WPA? If the latter do you know if your XP laptop wireless card supports WPA (some older cards only). If you find that this is the problem, you can go to the WEP encryption or buy a WPA compatible device to use instead of the current device on the XP laptop.

  If you don't know how to find this information...

  The range and the model are probably on a sticker on the bottom of the laptop.

  I think that there is a sticker on the side of 2wire routers (leastways are those provided by BT) gives you the encryption key and this might also state what is the type of encryption. Or, if not, open a web browser such as internet explore/firefox etc and go to http://gateway.2wire.net, somewhere on the router admin pages, you will find information on wireless security/encryption.

  Regarding the card laptop wireless, I can help with this if you give me the range and the model as requested above. I can, also, be able to determine from the description of the device in Device Manager. Click Start, click Run, type devmgmt.msc and press ENTER. Network adapters (click on +) and transcribe the wireless adapter that there are listed in a response to this post.

  Tricky

• my hotmail is too slow opening received e.mails and e.mails new writing, it takes at least 15 minutes to open the e.mails

  opening and writing e.mails is too slow it takes several minutes to open the page the box and wright a new e-mail

  This forum is for comments on the forums for answers. You should take a look at http://windowslivehelp.com/.
  
  --
  Stefan Blom
  Word Microsoft MVP
  (Message posted by Microsoft Answers NNTP Bridge)
   
  
   

  "Mohamed Shaboury" <=?utf-8?B?TW9oYW1lZCBTaGFib3VyeQ==?=>wrote in messageNews: 69affb82-3 a 58 - 4A 89-ad96-63acfc7ebcb3...

  opening and writing e.mails is too slow it takes several minutes to open the page the box and wright a new e-mail

  Stefan Blom, Word of Microsoft MVP

• Since a week everytime I turn on my laptop there is a update that takes at least 20 minutes, after the update is finished, he won 't restart. Restart repair, take another twenty minutes or more. Why is this happening?

  Is it possible to have the updates everytime I turn on my computer, it happened six times in one day. Help, please

  Hello

  More than likely that you have one that is stuck.

  I guess that part of the question could be a driver which is really old or similar should not be loaded.

  This exit Windows updates on (after you have access) and stop the updates of the driver to load.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ---------------------------------------------------

  You can use the solutions in this KB - 3 methods and I listed a little help for them below

  The update is not installed successfully, you receive a message, and the computer restarts when you try to
  install an update in Windows Vista
  http://support.Microsoft.com/kb/949358

  Method 1: Start Windows Vista with the Windows installation media and use the repair feature

  How to do a startup repair in Vista
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  You can also do a safe mode startup repair to access the Recovery Options If you have them available
  or use the DVD as described above.

  This tells you how to access the System Recovery Options
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  Try recovery options Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  Method 2: Start the system in safe mode and then use the system restore feature

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  You can also do a restore of the system of starting with a Vista disk.

  Method 3: Rename the Pending.xml file, and then change the registry (this method is part of the advanced troubleshooting)

  See article below for that.

  You can use this method on the updates that have this problem.
  http://support.Microsoft.com/kb/949358

  Hide the update (click right - HIDE in the updates of Windows) and go to the Microsoft Download Center to download
  and install it.

  Microsoft Download Center
  http://www.Microsoft.com/downloads/en/default.aspx

  ------------------------------------------------------

  Once you are in Windows I was running once again reset here as a precaution.

  How to reset the Windows Update components?
  http://support.Microsoft.com/kb/971058

  Hope this helps sort it out for you.
  Rob - bicycle - Mark Twain said it is good.

• The desktop icons and taskbar are at least three minutes to load when I start the computer.

  Original title: problem with the desktop icons

  All of a sudden when I start my computer, the icons on the desktop and icons at the bottom of the clock of the take at least three minutes to load, and before that time, they used to load in a few seconds.  Also, I have no problem with the computer start.  Any help to solve this problem will be greatly appreciated.

  According to the specifications of your system, hard drives on your system are disks IDE (not the SATA drives).

  Sometimes the Interface IDE mode can change from DMA mode to PIO mode and when that happens, things sudden. run very slowly, but it is easy to check and adjust if you need to.

  Here's how:

  If you are using IDE drives, use Device Manager to check the channel Transfer Mode IDE is set to something like DMA if available (depends on your hardware) and the slow PIO mode.
    
  Don't forget: PIO is the slowest, DMA is faster.

  It is easy to check and usually easy to fix and the mode would not have changed in itself, so if she changed to PIO, change it to DMA, and then understand why it changed and fix it.

  To launch the Device Manager console, click Start, run and enter in the box:

  %SystemRoot%\System32\devmgmt.msc

  Click OK.

  Expand the section controller IDE / ATA to see your IDE channels. Each right click and choose Properties for each channel that has a tab advanced settings, determine the Transfer Mode. There are usually 4 channels to check in a desktop computer, maybe less for laptops.

  Faster selection will always be a kind of selection DMA (usually: DMA DMA5, UDMA, etc.).  If it is PIO, change it to DMA.
    
  If you are unsure of what you see after return of help and advice.
    
  If you make settings, restart and check the settings again to make sure that any change stick.
    
  What may have caused the change?
    
  http://support.Microsoft.com/kb/817472

• Why my computer automatically takes up with dashes until I can connect?

  My computer is a HP Pavilion A6600F, Windows 7 64 bit, and recently when I turn on the computer it automatically fills the sign in areas.  I had to hit enter twice before I can connect.  A few times when I want to do a search for something, he will fill this area with dashes and allow me to stop him.  I had to go through all the types of changes to work right.  It started just recently after I moved.  Would this be something loose or do I have to call in a specialist?

  adagarner wrote: my computer is a HP Pavilion A6600F, Windows 7 64 bit, and recently when I turn on the computer it automatically fills the sign in areas.  I had to hit enter twice before I can connect.  A few times when I want to do a search for something, he will fill this area with dashes and allow me to stop him.  I had to go through all the types of changes to work right.  It started just recently after I moved.  Would this be something loose or do I have to call in a specialist?

  Hello adagarner, you could try to go back to a Restore Point Windows before this problem appeared.

  Go to the start ORB, all programs, accessories, System Tools, System Restore. Click the system restore option and should open the window of Windows system restore. It may take a few seconds for it to open.

  Then are looking for a System Restore Point before the problem occurred.

  The system should reboot and the system starts on the normal desktop and a message if poster who advises the system was a success or that Windows was not able to restore the system.

  Sometimes it works and other times not, but may be worth a try.

• Can connect to internet when wired, but not wireless

  Just restarted my computer laptop and now unable to connect to the internet.via my wireless router. Am connected to the router, but not the router to the internet. Can connect to the internet by a cable in the router to my laptop. The computer identifies the network correctly when it is wired, but shows as not identified during the use of the wireless router. Already fed the moden and router down twice, without change. other phones that I use are able to access the intwrnet via the wireless router, so I think it has to do with the system restart I just did on this laptop. Any ideas would be helpful

  Hello

  You did it all changes on the computer (which is originally this issue) before this problem?

  Read the following article that may help you.
  Windows wireless and wired network connection problems
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

• VPN question, can connect, but can, t go anywhere

  Hello

  I have my house 2621xm router and I have configured my router as a vpn server and I can connect using vpn client, but that's all I can do. I can't ping or go anywhere. I can't find all the documents on cisco or google that can help me here, so here I am.

  Basically, I give the client vpn ip 192.168.6.X then I want the customer to be able to go anywhere in the 192.168.1.X range 5.X and 10.X.

  any help would be appreciated to greately!

  Try,

  crypto dynamic-map VTELDYNAMAP 10

  market arriere-route

  Kind regards

  Prem

• After the blackout, VMs will not start and Vsphere Client cannot be re management/access / start VMs on a physical server.

  After the blackout, VMs will not start and Vsphere Client cannot be re management/access / start VMs on a physical server.

  Get the error message...

  [	[: start: W: 1] 2016-06-09 14:41:36.562 Log for vSphere Client Launcher, pid = 4532, version = version 5.0.0 = build-455964, option = released
  [	[:QuickInf:W: 6] 2016-06-09 14:42:20.421 the value of the search dll C:\Program Files\VMware\Infrastructure\Virtual Infrastructure Client\5.0 path
  [	[:QuickInf:W: 6] 2016-06-09 14:42:24.281 load shared dll: C:\Program Files\VMware\Infrastructure\Virtual Infrastructure Client\5.0
  [	[ : start: w: 6] 2016-06-09 14:42:41.406 Log for vSphere Client, pid = 4532, version = version 5.0.0 = build-455964, option = release, user = root, url = https://192.168.10.200/sdk
  [	[:ShowExcp:W: 6] 2016-06-09 14:42:42.406 error: an internal error has occurred in the vSphere Client.

  Details: The initializer for type for 'VirtualInfrastructure.Utils.ClientsXml' threw an exception.

  Contact VMware support if necessary.

  System.TypeInitializationException: The initializer for type for 'VirtualInfrastructure.Utils.ClientsXml' threw an exception.

  at VirtualInfrastructure.Utils.ClientsXml.FetchIfClientsXmlExists (String serviceUrl)

  at VirtualInfrastructure.LoginUtils.LoadMatchingVI (String serviceUrl)

  at VirtualInfrastructure.LoginUtils.CreateNewService (String serviceUrl, ClientSpec clientSpec, Boolean waitForTopology, Assembly / viAssembly)

  to VMware.Vim.Client.VimClient.StartUp (2 specMap, String [] arguments dictionary, Manager of LoginEventHandler)

  to VpxClient.UI.InitializeVimClient (dictionary 2 specMap, String [] arguments)

  to VpxClient.UI.StartUpIfNotMultiVcSecure (dictionary 2 specMap, SecureString password, String [] arguments, LoginEventHandler Manager, String, dllPath, list 1 listOfVcUrls)

  System.TypeInitializationException: The type to 'VirtualInfrastructure.Utils.TypedXmlSerializer ' 1' initializer threw an exception.

  to VirtualInfrastructure.Utils.TypedXmlSerializer'1.ctor)

  to VirtualInfrastructure.Utils.ClientsXml... cctor()

  System.IO.IOException: The process cannot access the file "C:\Documents and Settings\XXXXUSERNAMEXXXX\Local Settings\Temp\nyhn4bev.dll" because it is used by another process.

  ...

  to System.Xml.Serialization.XmlSerializer... ctor (Type type)

  to VirtualInfrastructure.Utils.TypedXmlSerializer'1.cctor)

  -End of the exception stack trace internal-

  -End of the exception stack trace internal-

  After many unsuccessful attempts tried to connect Vsphere client, the client has finally connected and was able to on all virtual machines. Thanks to Luciano Patrão for study. For all in the community, peace out...

• New host ESXi 5.1 in DMZ - cannot connect through vCenter Client or web, but can via SSH, if I have activated

  We have a simple DMZ where I set up a host running ESXi 5.1. I have another windows server in the DMZ subnet and I can load the new ESXi her host's web site. From my PC in our LAN I can not pull the top web interface 5.1 ESXi or connect via vSphere Client. If I enable SSH on the new host, can I use Putty to connect to the new host ESXi from my PC in LAN. I watched the event logs in our firewall and nothing seems to be blocked. I guess that the problem is related to a value or a firewall setting in ESXi 5.1 but I don't know. Any help would be appreciated.

  Thank you

  -Kevin

  Just a thought. Why don't run you the ESXi host in your internal network management and only virtual machines in the DMZ? Would make the ESXi host management even more secure, and you wouldn't have to open Firewall ports.

  André