ESXi 5.1 AD join domain issues

Similar Questions

• HOWTO join ESXi 5 to the AD domain using PowerCLI

  I couldn't add 5 ESXi hosts to the AD domain using PowerCli 5.

  I tried to use LucD note, but it does not work probably because it only supports ESXi 4.1

  http://www.lucd.info/2010/07/25/script-vSphere-4-1-ad-authentication/

  Does anyone know how to add ESXi 5 domain host using PowerCli, brand-new cmdlet as JoinDomain etc. ?

  Joern

  I have to update this post.

  Try to replace the line 123

  $hostADAuth = [VMware.Vim.VIConvert]: ToVim41 ($result)

  with

  $hostADAuth = [VMware.Vim.VIConvert]: ToVim50 ($result)

• Cross-domain issue

  I've developed a Flex application for a while, using HTTPService to GET XML objects to and remote XML MESSAGE to a web service.  Don't launch the application on my local machine, I had no security problems.  However, I just wore the first instance of the application on our server and I started getting security errors (faultString = "Security error to go to the url", faultDetail = ' Destination: DefaultHTTP "").

  I'm sure that there is a problem between the areas, and I'm communicating with those responsible for the server to get a security policy file that is added to the root of the server.  When I was communicating with them, however, I could not explain clearly why they the server due to add a policy file security for what is mainly a problem of the client security.

  • Am I right that it is a cross-domain issue?
  • Why did I have not this error when I spear the app of my file system?
  • Why is the server responsible for security rather than the client policies?

  Thank you.

  I think that is the point of having a crossdomain file, so nobody can take your SWF, the hack file and mess with their data.

  If you are into Flex Builder, you create the SWF file.

  Once its on the web, the crossdomain file protects the data and your SWF of piracy.

  If this post answers your question or assistance, please mark it as such.

• Problems with Server 2008 R2 Kerberos with Mac and CentOS machines? Need to re - join domain

  We are having a problem with our Mac and Linux / CentOS machines constantly having to be re-attached to our AD domain.
  We are able to join machines to the domain successfully, but after a few weeks or if authentication is broken and we again join them to the domain.
  I see Security event logs on our domain controller when kerberos authentication fails.
  On the linux server - I see this message in the logs
  -binding failed: server not found in the kerberos database.

  I'm guessing this has to do with Server 2008 R2 and incompatible mac / linux versions.

  Any ideas?

  Hello

  I suggest you try to post the question in the forums and check them off below if it helps:

  http://social.technet.Microsoft.com/forums/en-us/windowsserver2008r2general/threads

  It will be useful.

• ESXi 5.1.0 and updates issue

  Hi all

  I have a certain ESXi 5.1.0 servers that are outdated with respect to updates. If I find what version/patch level I'm on and update all patches from there or can I everything simply to apply the latest update and get all of the fixes that are included in the other updates?

  What is your experience with this?

  Thank you!

  Hello

  VMware release individual patches/updates to update / security fixes necessary but periodically they will release an update rollup or a new version which includes all updates prior to this date.  Between these stacks of additional individual fixes may be rejected you will need to find a facility manually unless your strategy is to wait for the next cumulative, so you need to consider your political correctness as to how you will address the issue, if you get the patches as they become available or just apply the cumulative patches and releases and major updates.

  However, the best way to handle this is via the Update Manager if you have installation, you can automatically download all updates, update rollups, patches, fixes, etc. and create base lines which will do the work for you in the host of scan and identify the what patches are missing, and make sure you can get them all to the same correction level , but in the short term, you can install the latest update (eg. 5.1 update 3) and which will include all the updates up to the date of release of this update.  To make sure you can see the Release Notes to confirm exactly what patches and fixes are included in each version.

  Hope this helps

  vM

  -----------------------

  VCAP-DCD / VCAP-DCA / VCP-CLOUD / VCP - DT / VCP5 / VCP4

  -----------------------

  vMustard.com

• ESXi 5.0 can join vCenter, vpxa rogue folder cannot be deleted

  Hello

  We have an ESXi 5.0 that cannot be joined to vCenter 5.1

  It fails with timeout of waiting for vpxa start.

  the problem seems to come from:

  / opt/vmware/vpxa/vpx # ls - lah

  drwxrwxrwx 1 root root 512 Mar 12:40 8.

  -r-xr-xr-x 1 root root 29.7 k August 19, 2011. #vpxResultFilter.xml

  drwxrwxrwx 1 root root 512 10 may 2012...

  / opt/vmware/vpxa/vpx # rm-rf.\#vpxResultFilter.xml

  RM: cannot remove the '. #vpxResultFilter.xml ': operation not permitted

  This file cannot be deleted.

  The host has failed to join vCenter previously and the vpxa could not be uninstalled or installed.

  Please help

  Thank you

  Hi all

  I managed to solve the problem.

  It was so simple:

  Newspapers, I noticed that: when you try to join the host to vCenter, he was questioned on the vpxResultFilter.xml file and could not find it. (the file was somehow been renamed. #vpxResultFilter.xml)

  I copied. #vpxResultFilter.xml to vpxResultFilter.xml as below and voila, it worked.

  / opt/vmware/vpxa/vpx # ls-l - has

  drwxrwxrwx 1 root root 512 1 Aug 13:29.

  -r-xr-xr-x 1 root root 30384 August 19, 2011. #vpxResultFilter.xml

  drwxrwxrwx 1 root root 512 10 may 2012...

  -r-xr-xr-x 1 root root 30384 1 Aug 13:29 vpxResultFilter.xml

  Hope this helps someone else.

  Thank you all.

• Related Office Clone join domain and gets then disjoint after reboot

  Hello

  I have an ad in which a DHCP server is configured.

  My image of parent is not connected to the domain. I created a customization script using the specification of customization Manager. The office linked clone uses this script to enter the field.

  Singularly, the linked clone office made an entry in the Active Directory computers and users, but when it restarts and displays the login screen, it gets WORKING group instead of domain.

  In the end, I get an error of customization in the Console Administrator display.

  A possible explanation for this? Am I missing something?

  I did release the ip address and empty the DNS before taking the snapshot.

  Thank you

  When you enable the composer on the Administrator page, you specify a user account that has permissions to domain indicated in the installation guide.   When you create a new pool, select quickprep as the method of customizing of comments that user account is used to join the domain and place the machine in which OU has been specified.

• Problem display 4.5 Clone WinXP join domain of Server 2008 R2

  Hello

  I have the problem... after I installed a 4.5 view and tested Windows XP and Win7 Clients environment.

  Microsoft is German 2008 R2 with Funtion Structure 2003.

  + When I use Clone related with WinXP... customers join not automatic at the field. In the event of Domin controller ID 5805 Netlogon log, + "computer XXXX account could not authenticate...". "Same problem when try Quickprep with Spec model. The template with the standard function works without a view... in fine vcenter... XP-clients join the domain R2 2008.

  The customers of Windows7 with bound Mode works great... join the domain.

  Pls help!

  Have you tried to apply Microsoft KB 944043 to the parent model?

  ____________

  blog.eeg3.net | Useful links related to VMware

  If you have found this device or any other post useful, please consider the use of buttons useful/correct for award points.

• ESXi and Dell Poweredge T410 install issues...

  Hello, we just bought a spanking new beand Dell Poweredge T410 with S300 raid Card... useless day, Esxi 4.0 or 4.1 will not install on it... We get an error message during the installation:

  "Could not find a data device to decompress the image for.

  This server was prchased Feb 2011... can someone tell me how I can get installed on esxi?

  The S300 controller isn't a device supported for ESXi. You must add a supported RAID controller. There are many other RAID controllers available for this server. The Perc 5 and 6 controllers are also good choices and are available on sites like e - bay, etc.

• Delay after domain join

  Dear Microsoft team,

  We have six identical touchscreen PC ("sword of the FEC") "Windows POSReady 2009". This problem affects all of them, while this does not happen on another of our clients in the domain (XP and 7).
  The domain controller is running "Windows Server 2011 64-bit" "VMWare ESXi 5" with a single field.»
  Before joining the domain, clients asked me to wait while the 'domain' list is being created. This process took about four full minutes.
  Because customers are now reunited to form the area, they 'autologon' using a domain account and start our application of sales...
  The boot process is delayed nearly three full minutes then the PC does nothing... until the startsound of Windows is playing.
  It does not have software or drivers on the affected machines.
  This is my diagnosis up to now:
  • LMHOSTS: creating an lmhosts file has not resolved the problem (KB314108).
  • DHCP: Configuring a static IP address does not resolve the problem.
  • Services: startup time is down to two minutes when the 'TCP/IP NetBIOS assistance' is disabled. However, he breaks the updates of group policy at startup ("the network path is not found"). Manually run "gpupdate" is always present.
  • NMCAP: Attached are four screenshots of MS NMCAP. The PC has been powered at exactly 21:43:45, received his lease DHCP-47 seconds later, but did not respond to ping from 02:50 minutes after the power! You can see the last ping unanswered in "cap1.jpg" on the top and the first ping responded in 'cap4.jpg '. You may find solution inbetween. There are a few "Bad Checksum" - messages. This log file NMCAP begins at 2:40 Minutes after the ignition and is 22 MB.
  • XBOOTMGR: Attached are four screenshots of a "boot trace. The Analyzer said he got a "reversal of time. Could be the solution to our start delay? Track does not belong to the same machine as NMCAP. The ETL file is 141 MB.

  Thank you very much in advance for your help!
  
  
  Kind regards
  Gibisch W.
  • (Removed screenshots. Problem solved.)

  The solution:

  http://social.technet.Microsoft.com/forums/en-us/26cc9c7b-318F-4BE0-9f44-4ffbc2cc0e44/XP-startup-delay-after-joining-domain

• Active Directory - join the domain for multiple devices

  Hi all

  I need your expertise to advice me how join domain for multiple devices.

  Currently my organization have more than 10,000 computers are made up of Windows XP, 7, 8 and 10.

  We will deploy new Active Directory server in the data center.

  Currently, we plan to go every computer/devices to perform a field joints. This method will take much time to complete the 10,000 devices.

  is there another method to do this?

  is there a method that all devices will join automatically field when it is connected to the corporate network.

  Thank you.

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• I cannot join the domain in my office with my home edition, Windows

  Anyone, please help me solve the problem please...

  I use Microsoft Windows Home Edition...

  I can't join the domain...

  If I open network connections, and then I click on advance and I choose network identification and then I click on edit, there is only the option of working group...

  But if I opened that there is two option in windows proffesional came... First area and the second is the working group...

  How do for pop up that way I can join domain in my office?

  I thank the of for anyone who can help me...

  Anyone, please help me solve the problem please...

  I use Microsoft Windows Home Edition...

  I can't join the domain...

  If I open network connections, and then I click on advance and I choose network identification and then I click on edit, there is only the option of working group...

  But if I opened that there is two option in windows proffesional came... First area and the second is the working group...

  How do for pop up that way I can join domain in my office?

  I thank the of for anyone who can help me...

  XP Home Edition is not supported to join a domain. XP Professional is.

• vMA unable to join the domain

  Hello

  
  

  I can't join the domain (windows-based).

  I want to join my vMA to the domain, but it is always the wrong password
  

  
  

  When I follow these steps on my vMA

  domainjoin-cli join < domain name > <-domain admin-user >

  
  

  He invites me authorization error so I tried with sudo

  
  

  VI-admin@VMA: sudo domainjoin-cli join < domain name > <-user-admin of the field: can I use to connect on my other computers >

  
  

  then he gives me a wrong password... my password is correct...

  I tried on two versions of vMA, 4.1 and 5.1/5.5
  

  any suggestions...
  

  Hey VirtualRay

  Your VMA has the same DNS settings in your area?

  So if you your vCenter Server ranging from ping vcenter01.mydomain.lan pings is returned correctly?

  If so, it should work

  1 from the vMA console, run the following command:

  sudo domainjoin-cli join

  2 when you are prompted, provide the password for the administrator of Active Directory.

  On successful authentication, the command adds vMA as a member of the domain. The command also adds entries in the file/etc/hosts with vmaHostname.domainname.

  3 restart vMA.

  Now you can add a target Active Directory at the VMAs. For the procedure to do this, see Add servers at VMAs targets.

  To check the settings of the domain of the vMA

  Since the vMA console, run the following command:

  sudo domainjoin-cli application

  The command displays the name of the domain for which vMA joined.

  :

• No junction domain (with customization of the reviews) Win2012 R2

  vCD Version: 5.2.2

  Hello!

  We try to ride Win2012 R2 with our ROV. We installed a new copy of R2, 2012 and we imported it in a catalog public vCD. Now we have added a virtual machine to a paralytic in an organization, rely on the model of R2 of 2012. In customizing of comments, we have signed all the necessary data, changing the SID, domain join (Domain: subdomain.ourdomain.de, the user who can join: ourdomain\username, password) and we give one another ComputerName and change the administrator password.

  Property intellectual property comes from DHCP

  Now, if we start the virtual machine for the first time, everything works fine (but it takes a lot of time to complete) except the domain join. The computer name has been changed and the admin password has been changed. But no domain join I wonder about that there is no entry in the guestcust.log for ourdomain.de and no entry in the sysprep log too.

  If we join the field manually (with the same credentials as user above), it also works.

  We tried to give only the username without ourdomain\ in the data domain join (I read that this could be a problem), but it does not help

  Any ideas what we should try?

  Find two issues:

  1. 2012R2 virtual machine that has been that the source of imports in vCD was not enabled (Windows Activation...) ... It seems that it is necessary

  2 2012R2 VM is an update of a VM 2008 installation... but then sysprep will work (seen in %WINDIR%\System32\Sysprep\Panther\ journal of sysprep). You need a new installation of 2012R2

  Now everything works fine

• How and when are ESXi 5.1 Services identified as (Active Directory) - they used?

  Hello

  I tried to find documentation for the three ESX5.1 services to understand when they should be or should be used, but have found nothing to help.

  I have several 5.1 ESXi hosts managed by vCenter 5.1 (with SSO of course), as well as Active Directory configured as an identity Service.

  In addition, I joined the hosts ESXi 5.1 for the Active Directory domain to allow AD authentication for host management direct when necessary.

  It all works well, however, there are three Active Directory related services that are stopped, so I'm trying to determine if they should really be executed to perform certain functions that are not obvious to me at the moment.

  The three services are:

  • Local security authentication server (Active Directory Service)
  • Server connection network (Active Directory Service)
  • I/o Redirector (Active Directory Service)

  I believe that some or all of these services are related to the integration of the 'same' in ESXi, but this does not really explain what they are doing, especially since I see no problems with authentication.

  Any idea would be appreciated.

  Thank you

  Rob Ralston

  OK, I answered my own question. Turns out that I had a confusing situation because I didn't have to reboot the host after the join domain operation.

  Now, all three services are started with the parameter 'Start and Stop with Host.

  So, while I have not seen any specific documents, it is clear enough, that these services are designed to run after the junction, that make sense.

  Rob