ETA App should help to get the time and date feature HELP!
Hi everyone, I'm doing an application where I need to get the time and date of the antone device can help, I know there is a function such as getDate or getTime but im not to know how to use it.
As far as I know,
I use this to get the time system (it returns long type)
System.currentTimeMillis();
After that, you can use SimpleDateFormat to convert date and time
SimpleDateFormat sdf = new SimpleDateFormat("dd.MM.yyyy, HH:mm"); String time = sdf.format(new Date(System.currentTimeMilis()));
Tags: BlackBerry Developers
Similar Questions
-
How can I get the time and date appears on a sony cyber-shot camera
How can I get the time and date appears on a sony cyber-shot camera
Hi terpmarty,
What is the model number of the Sony Cybershot camera?
Instructions for superimposing the date and time are model specific. Some models do not have the ability to superimpose the date and time too. In such a case, you can use the supplied software Picture Motion Browser (PMB) or PlayMemories home (WPH) (Compatible with the Windows operating system) to print the date and time on pictures. -
I don't know how to use the apps since all I found is on android, but apparently the Zeen is not compatible with the android apps. I have google calendar, but it doesn't work and want to only the time and date is displayed. I followed all the directions for adding applications, but they do not work or I can't understand them.
Salvation of theeagles,
The Zeen is unable to access the Android Market, but it's an Android device. There is a market for this called SlideME, and you should have the icon for it in your apps section. I have a station also, and I'm just a normal clock on mine.
Here is a link to SlideME, if you want to see what applications are available: http://slideme.org/
-
Whenever I have turn off my pc and reboot later, the time and date go to 0.00
Original title : improve system performance slow slow start
Whenever I have turn off my pc and reboot later, the time and date go to 0.00
Probably means the ROM BIOS chip gone bad and must be replaced. Its a small coin like chip located on your motherboard. You should be able to buy one on where one sells computers and electronic products.
-
How to set the time and date on printer n911a e-all-in-one officejet pro 8600.
How do you set the time and date on printer n911a e-all-in-one officejet pro 8600. This info is not in the user's guide or the getting started guide. Thanks in advance. Jim
Jim go to settings on the 8600, click Preferences.
There is an option DATE and HOUR.
-
Change the time and date of deposit when importing
Hi everyone, when I import images in my project, automatically first change date and time with the current date and time in the finder. So each imported file have changed the time and date when I search in the finder under the "created" or "modified" column, is this normal?. There is no way to avoid this?
Thanks in advance
Yes, you can prevent this! Go to the preferences of first and go to the media section. Uncheck "Write XMP IDS to files on import". Boom, done. First will not add his small beacon of metadata files when you import them. This isn't a huge deal for most publishers except Adobe apps could create media Cache files more than necessary if you re - use clips in other projects. Don't forget, however, anything, if you change the metadata (in the project Panel or metadata) file, it'll still change changed data for the clips.
-
Clock-calendar does not maintain the time and date
The clock-calendar on my laptop does not maintain the time and date after I put it.
Usually a sign that the bios cmos battery is defective and must be replaced
-
How can I reset the time and date on Windows Vista?
How can I reset the time and date on Windows Vista
http://www.ehow.com/how_2056384_change-date-time-Windows-Vista.html
http://www.Vistax64.com/tutorials/114989-date-time-change.html
Read the information in one of the links above.
See you soon.
Mick Murphy - Microsoft partner
-
How to change the time and date on the desktop?
My computer does not show the time and date.
I tried several times to update the date and time, but after the judgment the same problem persists.How to solve the problem?Mr. Thanapackiam I know that this issue please follow my steps
Step 1:-go to the Start Menu and Type "region and language" and press enterStep 2:-go to the location tab and select your current locationStep 3:-go to the Start Menu and Type "Services" and press ENTER. (i.e. open Services)Make sure that the Windows time service is running.Step 4:-click Date and time on the far right of the taskbar. Click Change Date and time settings.Step 5:-click Change Date and time settings button to change the date and timeStep 6:-Click Internet Time to synchronize the time with the Server onlineStep 7:- click on change settings , then update now
Thank you -
Would like to know if there is a way to get this huge place with date and time to turn off my computer and also the side thingy that comes out all the time and the date and time... it is frustrating to do something on my laptop and all of a sudden here they come out and I can not do a thing until I get them to go back whence they came there at - it a path to delete or if they are not all the time I don't really care for windows 8... Windows 7 was fine with me... not sure what to do thank you for your help frustrated
What a kind screensaver which is scheduled to start after one minute of inactivity?
What has happened since the first day?
Another program or process is causing the problem, what happens if check you mode safe and a clean boot to see if you can find the cause?
How to start Windows 8 in Mode safe
http://www.bleepingcomputer.com/tutorials/start-Windows-8-in-safe-mode/How to perform a clean boot for a problem in Windows Vista, Windows 7 or Windows 8
http://support.Microsoft.com/default.aspx/KB/929135If you test with another Windows user, rather than your current user, you have the same problem?
Any chance of linking to, or provide a screenshot of what you see?
How i: post a screen shot on this forum?
http://answers.Microsoft.com/en-us/feedback/forum/feedback_other-na/how-to-insert-images-in-MS-answers/94a5cb36-A21F-4A6A-B266-611cf6c910c8How can I insert a picture in a reply to a message
http://answers.Microsoft.com/en-us/feedback/forum/user/how-do-i-insert-a-photo-into-a-reply-to-a-post/17a15382-c587-44BB-9594-c0673c8402af -
How to get the time to date?
Hi Sir,
I need to recover the time to date.
' like ' 2012-10-03 04:32.
to retrieve the only time where it's 04:32
What is the query for this?
Thank youHi user,
You can use TO_CHAR function to obtain the hour alone
SELECT TO_CHAR (TO_DATE ('2012-10-03 04:32:00', 'YYYY-MM-DD HH24:MI:SS'), 'HH24:MI:SS' ) TI_ME FROM DUAL
Thank you
Shankar -
Using AS2 to get the time and change according to result
I need to make any changes to a flash projector which was built recently that changes of what is played according to the time of day. It is used to announce the breakfast or lunch/dinner for a restaurant. Previously we had put in place so that the time change happened at 5 in the morning and 10 o'clock in the morning. The code is below. The restaurant wants to change the time switch to be now at the half. I know how to extract the hours and minutes to do.
This is the code that I've been using
var currentHours:Date = new Date();var currentMin:Date = new Date();timeInHours = currentHours.getHours ();timeInMin = currentMin.getMinutes ();var today: Date = new Date();shownow = now.setMilliseconds;If (timeInHours > 4 & & timeInHours < 11) {}breakfast_mc._visible = true;breakfast_mc.play ();dinner_mc._visible = false;dinner_mc.stop() ;/ / trace (timeInHours);} else {}breakfast_mc._visible = false;breakfast_mc.stop ();dinner_mc._visible = true;dinner_mc.play() ;/ / trace (timeInHours);}trace (timeInHours);trace (timeInMin);Stop();Clips of film of breakfast and dinner have this code in them, as well as at the end of each cycle, it checks the time and switches.I found this code on Flash Kit, and wanted to try to change it, my hope, was so that he could generate a delay of 24 hours 1604 or 1029 I could then do a comparison <>/ with, but this function adds the numbers then 16:15 = 31 and 12:19 = 31 also. Does anyone have any suggestions on how I can do this? I need time to change at 05:00 and 10:30. There is a possibility that they will want to extend out to include the day of the week as well. Now I just need the fractional hours for works well.function checkTime(){dat var = new Date() ;var h = dat.getHours (); / / 24-hour format is already...mn var = dat.getMinutes ();/ turn to the last limit of 15 minutes ///mn = Math.floor (minutes/15) * 15;/ / OPTIONAL - add zeros to the hour and minuteif (hr < 10)hr = "0" + hr;if (mn < 10)mn = "0" + mn; / / remove these last 4 lines if the zeros not significant not due notretour hr + mn ;}usage example:time = checkTime();trace (time);Any suggestions are welcome. Thanks in advance!If you want to do something when the user time is between 05:00 and 10:30, use:
var d: Date = new Date();
If ((d.getHours () > = 5 & d.getHours ()))<10) ||(d.gethours()="">10)><>
No matter what
}
-
HOW TO SET THE TIME AND DATE FOR MALAGA SPAIN 29130
TIME AND DATE FOR MALAGA SPAIN
Hi Colin,
Thanks for posting your query in Microsoft Community.
- Are you referring to a zip code when you say 29130?
I would refer to the procedure described in the article below to set the date and time in Windows 7.
Change the display of dates, times, currencies, and measures
You can also view: set the clock
Hope this information is useful. Please feel free to answer in the case where you are facing in the future other problems with Windows.
-
Can not get the title and date/time to appear on the photo to develop, or a library
I must have done it when I was trying to do some other keyboard shortcut and got hurt - and now I can not understand how to get rid of. But a few weeks ago I did something and now the file name, date/time and size image appear in white text on the top left of any photo I have in develop it or library screens:
So you can see "_MG_0955.CR2" and other details in the clouds. Does anyone know how to get rid of it? I can't find anything in one of the menus. I'm on Lightroom 4.3 for Mac OSX Mountain Lion.
Thank you!
Ltter that I you keyboard through the Loupe View Info (even in the develop Module).
You set what you want to see by pressing cmd + J - and select the parameters for Info 1 and Info2.
Letter I cycles this way: 1 - Info 2 - no overlay Info.
-
Get correct time and Date data in DIAdem data 11 PDM LabView
I have a handful of files large tdms (9 million data points) collected with LabView that I need to extract elements from and export to a text file, with time string data.
I use DataFileLoadSelect and the option to register, and then DataBlCopy in bring in a segment of data at a time, but I'm having convert explicitly each time value of a time base of LabView (01/01/1904) to the time base DIAdem (01/01/00), not to mention the offset, before writing the date-time as a text string - it really slows down the process.
I ' t hit me that DIAdem (11.1) has got to have a way to correctly read the timestamps of LabView, but I'm a newbie to tiara, so any suggestions would be helpful. And no, I don't have LabView LabView installed locally, using a vi is not an option for me.
Thank you
Eric
Hi Eric,.
I saw your second post after I have posted my first answer. Your second post has indicated that the main issue was the value of date/time of departure in tiara. All versions of DIAdem, waveforms of support (10.0 - 11.1 currently) by default to hide the start time of each waveform absolute in an invisible property. It is responsible, but you'd never know it by scanning the table of properties in the data portal. Idea of R & D with this implementation is that most people will want to look at the relative time of the wave, and they were still hiding this "wf_start_time" property so that users would be confused by the inconsistency between what is displayed in graphic form and what they see in the properties of the data portal. They have certainly achieved their goal, but only for customers, they had in mind. It only that exacerbates an already frustrating problem for your use case.
But there is a way to read this date/time property invisible absolute beginning and create a channel of date / time that you need for ASCII-output - I join you two examples below. If you need to be more focused on the shifting geography, so I recommend the ChnLinScale() function instead of the calculator - channel, it should be even faster.
Hope this helps,
Brad Turpin
Tiara Product Support Engineer
National Instruments
Maybe you are looking for
-
How do I change my language to English in Albanian calendar
How do I change my language to English in Albanian calendar
-
Hello During the installation of Windows 7 or 8.1 using a USB stick - get the message "cannot be installed, it is a GPT partition. I have 64 bit install discs for Win 7 and Win 8.1. These two install on my desktop in duel boot. I made a Flash DRIVE o
-
IPhone update IOS 9.1 5?
My iphone 5 is running iOS 8.3 and I really have no complaints, but I'm curious how iOS 9.1 runs on this unit. It is better to update or should I stay with what I have? I really don't read something positive about 9.1, particularly on older devices s
-
What is the minimum value for the data type double?
... a more academic question: what is the minimum value of the data type double? I thought 'double', it is the 8-byte IEEE standard and what I remember, it's + - 1.7E + - 308. The more different number of 0 should be 1.797E - 308. This is why I was
-
Windows update fails during the installation of KB950762
Info by mistake the complete log of events. Event type: errorEvent source: Windows Update AgentEvent category: InstallationEvent ID: 20Date: 12/05/2009Time: 13:54:01User: n/aComputer: VIDEO1Description:Installation failure: Windows failed to install