Ethernet cable

I need to replace the Ethernet cable that connects the Actiontec PK5000 modem/router to my second computer across the room. It is 10-12 feet long and blue color. These cables are practically interchangeable and change much, since it was used for 4-5 years?

Thanks for help you, hope this is the right forum.

dalem29

I need to replace the Ethernet cable that connects the Actiontec PK5000 modem/router to my second computer across the room. It is 10-12 feet long and blue color. These cables are practically interchangeable and change much, since it was used for 4-5 years?

Thanks for help you, hope this is the right forum.

dalem29

Yes, the cables are interchangeable.

The life of cable RJ45 Cat6 depends on where it is installed.

Bev.

Tags: Dell Desktop

Similar Questions

  • How can Hello I just transfer program from a laptop to a desktop iMac computer using an Ethernet cable

    Hello

    How can I transfer a single program and its content from a laptop computer to an iMac using an Ethernet cable

    You can network or target mode a mac computer

    OS X Lion mountain: connect to shared computers and servers for files on a network

    Share files between two computers with target - Apple Support disk mode

    However, to transfer a program is not the user data (music, photos, etc.), you must follow the directions of developers and license agreements. Some programs need to be seen to withdraw their authorization, some don't, but most require a clean install to write the necessary components in the correct places, otherwise if you are 'slide' from one place to another, you can easily inherent problems of this method.

  • How to connect an external device via an Ethernet cable with iPad Air?

    I need to connet to my iPad, a digital mixing console THE Behringer X Air xr18.

    LLA WiFi connection e/s is not overall durin live so I need to use the Ethernet cable.

    You can not unless someone makes a dongle, but even in this case an application had to talk with the dongle do not believe that a dongle could add something like kernel as a new network interface which could access normal applications

  • What is a substitute for the migration assistant? I tried in vain for three hours to migrate files from a macbook pro to each other so that even if connected with the ethernet cable the computers never see each other.

    What is a substitute for the migration assistant? I tried in vain for three hours to migrate files from a macbook pro to each other so that even if connected with the ethernet cable the computers never see each other.

    You can connect otherwise?  USB or FireWire or love at first sight?  You can connect both machines and start the one you want to transfer to target disk mode.  If your other machine is up and running with an account on it and you just want to move files, you can simply drag and drop the FRO the machine mounted TDM, or you can use the migration wizard.

    Or, if the other machine still starts and runs, you can start both computers and connect to the same wifi network and share the hard drive like machines on the network.  Access them in the finder on the new machine files and drag-and - drop, or use the wizard migration, on wifi.

  • I want to thank my wifi in another part of the House with an Airport Extreme. But I want to not be connected to the modem main via ethernet cable is it possible?

    I want to thank my wifi in another part of the House with an Airport Extreme. But I want to not be connected to the modem main via ethernet cable is it possible?

    I put in place already to extend the wifi of my modem still connected to the modem via ethernet cable.

    Now I want to be considered on the floor and use it to extend the wifi without ethernet cable

    The AirPort Extreme can extend only wireless signal from another router from Apple, so if you want to take the AirPort Extreme on the floor and extend wireless signal, you will need another airport connected to your modem by Ethernet cable router to produce the wireless signal that will extend the extreme on the floor.

    Another way of saying the same thing would be to say that if you want to extend wireless using a router from Apple, you'll need two of them do... because AirPort Extreme is not compatible with a third-party modem or modem/router for this purpose.

  • MB Pro restarts randomly with the ethernet cable is plugged

    I recently bought a thunderbolt reduction - Ethernet [1] and it works very well. The problem is that when it is plugged in, my MacBook Pro (13', 2015, i5, 8 GB) gets very hot. This isn't a problem, but the next thing is really annoying.

    Whenever I'm not load, but the ethernet cable is connected, and MacBook goes into sleep mode, the system turns off instead. Thus, for example, when I don't have the power cable and if go for 5 minutes, the system automatically sets the mode 'sleep'. When I come back, it is turned off, and when I hit the power button, a black screen with the Apple logo and a text in several languages, saying that the system restarted because of a problem. After that, MacBook starts normally.

    The same phenomenon occurs:

    • When the power cable is not connected and I close the screen
    • When the power cable is not connected and I SLEEP manually the MacBook
    • When the screen is closed and I plug the power or the ethernet cable

    I use OS X 10.11.

    [1]: shot of lightning-Ethernet reduction ter http://www.apple.com/shop/product/MD463LL/A/thunderbolt-to-gigabit-ethernet-adap

    The SMC reset may help:

    https://support.Apple.com/en-us/HT201295

    Ciao.

  • Satellite P750 - no ethernet cable connection

    I have a Satellite P750 running on Windows 7.
    When I plug the ethernet cable, I have no connection.
    The same cable works fine on other PCs.
    The network is set to obtain an IP address automatically. The network connection uses RealTek PCIe GBE family Controller and diagnostics say that this works normally.

    I don't know what else to check or try to get this connection work.
    Any suggestion would be appreciated.

    Are you using the original operating system that you got with your laptop?
    When you check the NIC in Device Manager is installed and registered properly card?
    When you connect the LAN cable to the LAN port are yellow and light green assets?

  • My Pavilion does not recognize my ethernet cable

    I have a desktop HP Pavilion Slimline s5623w with Windows 7 64 - bit o/s.  This computer connects to the network via a Belkin 54g router that connected to the Internet by cable.  All of a sudden I can't access to the Internet (cable) and get a message that I need to connect the Ethernet cable.  The cable is connected and the LED will Flash next to the Jack at the back of the computer ethernet.  I even tried to connect directly to the reception by cable without success.  I have connected to my Belkin Wireless with a new cable, still nothing.

    Anyone have any suggestions, short he shooting?

    Hello james9285,

    You can also check out the link below on the Site of Hp Support:

    http://WWW8.HP.com/us/en/support-topics/network-Internet-support/cant-connect-Internet.html

    Here are a few basic things that you should check if you get flashing link lights what activity see the:

    1.) check that you have found an IP address after you have connected the ethernet cable:

    (Enter the command line and run ipconfig)

    2.) while in the command ping 127.0.0.1 loopback line

    (This will verify that your card is able to communicate)

    3.) check that the driver does not work correctly:
    (Right click "Computer", click on manage and check on the network tab, if you see the driver Ethernet)

    If the wireless connects successfully as directed by your computer to perform the following acts:

    1.) Ping a site command line:

    (Enter the command line and ping google.com)

    If these steps are followed and you managed a communication & there is no problem of driver, that contacts your ISP (Internet Service Provider) and they will be able to provide support remotely.

    (Please contact me if you have more questions, I'm not an employee of HP, but I am willing to help!)

    {- Please click on the star of 'White Kudos' to say thank you for helping.
    Please click on 'Accept as Solution' if my help has solved your problem. ----------]

    Ezekiel Henson

  • Disconnected Ethernet cable

    Hello

    My Imac has been connected with a cable ethernet directly on the road, but today I can't use this connection because she says that the network cable is unplugged, witch is NOT. So now I can access via wifi.

    I tried to connect the network cable to a different port and use another cable bu nothing...

    Can someone help me please?

    Thank you!

    Restart the computer and reset the PRAM while you're there. If it does not the test with another EtherNet cable.

    Instructions for iMac Intel SCM and reset the PRAM

  • Changed to Comcast modem / gateway of the infinite. Ethernet cable lights are at both ends, but yellow light flashes on the airport. Diagnosis says not connected, but I have internet service. How to return to the GREEN?

    Changed the old Comcast to Comcast modem / gateway Infinity with wifi. Ethernet cable lights are lit at both ends, but yellow light flashes on the airport. Diagnosis says not connected, but I have internet service. How to return to a GREEN fixed?

    Whenever you change your network hardware, it's always a good idea to carry out a new round of full power to all your devices. Check out the following Tip of an airport users for more details. Please post back your results.

  • Qosmio F10 disconnected ethernet cable?

    Hello
    Seem to have developed a problem with the Internet recently. Laptop won't connect now wireless Internet even if the ethernet cable is plugged in.Computer reports a network cable is unplugged. Tried different cables and also reinstall driver for WIRELESS card intel. Device Manager reports all works very well. It's as if laptop won't return without wire in cable mode
    Running windows xp mce and using a DG834GV2 router netgear
    Any help much appreciated
    Thank you

    Hello

    the wireless connection should not have an effect on the connection of the cable, but for sorting, disable the WIFI network.
    As you say that the cable is correct, it may be the network ports on the laptop or the router. Try to connect the laptop to another network and another computer to your router. You should then see where is the problem.

    Good bye

  • Re: NB200 - automatic plug-and-play for Ethernet cable

    Do you know why I don't have automatic plug-and-play, when I connect to internet ethernet cable on my NB200?

    Hey mate,

    Automatic configuration tell you exactly?

    Normally, nothing is plug-and-play. If you want an Internet connection via Ethernet cable, you must configure this port. This means you need to set a static IP or DHCP.

  • HP 6500 E709a network main AIO: printer Ethernet cable to the router

    This should be a simple question. My home/office network has a router Belkin Wireless 600n. I'm not sure how to respond to the installation of the software asking how the printer is connected to the computer. I have both wireless and Ethernet wired computers on this network. I am trying to run the installation on each computer software. I'm only given two choices, USB or wireless. I think that there should be a third choice; Ethernet cable. Has anyone else encountered this problem?

    Hey @billytec,

    I understand that you run into a problem when running the network installation on your windows computer to your HP Officejet 6500 all-in-One Printer. I want to help you with this today.

    Choose the wireless network option shouldn't cause problems during the installation of your printer. It can always be detected on your network and should install without any problems at all. When it comes to your computers or wireless, which makes no difference to the way in which they communicate with your wired printer. The only requirement is that they are all on the same network.

    To make sure that you run the correct installation program, just click here. Once the site opens, select the download button at the top left. Once the download is complete, do execute the instructions on the screen to install your printer.

    Please let me know if this clears up any confusion. I wish you good luck!

  • NB100 - unable to connect with the ethernet cable

    My netbook works very well with the wireless connection (even if I get only 4 MB when I have 10 MB connection). I visited a House of friends the other day and she does not have a wireless router.

    I plugged the cable broadand on my machine. I disabled the wireless connection and activated the network connection in network connections. I turned off then the feature wireless on the keyboard with the keys Fn & F1.

    It shows that there is a link in my taskbar, but when I try to open the internet it does not connect.

    I thought it was his connection because she had problems so today I went to another friends house and got exactly the same response.

    I decided to try the same thing at home and I disconnected the ethernet cable from my wireless router and performed the steps listed above.

    Still no joy - am I missing something?

    Tips:

    Use a static IP address, and not using DHCP.
    Disable your firewall. It can block the network connection.
    Disable network cards won't do not. If you use wired LAN, turn off wireless and Bluetooth in the Device Manager.
    Check if their ISP requires a power of Attorney, if they don't, specify the Proxy and Port in your browser settings.

  • How can I connect my apple tv to my wifi using an ethernet cable?

    So I can not find my apple tv remote, but I know that I can still use my iPhone as a remote control. Because I need to connect to a new wifi spot, I know that I can connect my ethernet cable to my apple tv and then use my phone as a remote control. Is it possible that I can put in my wifi information in my apple tv so I don't have to continue using my ethernet cable?

    I don't understand. what the ethernet connection has to do with using your iPhone as a remote control?

    If your iPhone is already setup as a remote control for the Apple Tv, so you can use it to configure the Wifi connection for this as you would with the normal remote, by going to settings on the Apple Tv.

    If you have not yet set your iPhone as a remote control, then there is nothing you can do as you need the apple tv remote to access the relevant screen to set up the iPhone as a remote control.

  • Can I connect my Airport Extreme base station via an ethernet cable to a counter of locus?

    Can I use my Airport Express (802.11n Wi - Fi) to connect with an ethernet cable, a locus counter that is used with a solar panel inverter?  Currently I use the hotspot to connect two different Mac computers and an Ipad.  Sungevity, Setup, told me that the signal must go in a direction of my locus meter satellite modem.  Sungevity also told me that if I can hard wire any device (such as a computer) directly from my Airport, I should also be able to do the same with the meter of locus.  Has anyone tried this before?

    Thank you.

    North Country Boy

    What is the AirPort Express you have?

    As you test, turn off the WiFi on a computer and then connect the computer to the local network <-->port on the AirPort Express using an Ethernet cable to see if the computer can get a good connection Internet in this way?

    If he CAN... and if the people of support for your solar panels have provided the correct information... then the meter will work.

Maybe you are looking for

  • Maildelivery error message for a specific when contact of the envoys of Macbook, NOT sending the iPhone.

    Hello! When sending mail to a specific contact from my application of Mail of Macbook, I started getting error messages Maildelivery a few weeks ago and discovered at the same time that the mail goes by without problem when sending from iPhone.  My M

  • Partition of time-Machine add the unallocated space

    HelloI'm on Macbook Pro 15.4 "mi retina 2013I have 2 questions about Time machine1. I have a 512 GB SSD HDD and I bought a new external drive 2 TB of HARD drive, how do Mach I use for backup of my internal drive with time machine on the external hard

  • Is dualboot on Satellite L300-1 has 3 possible?

    Hello I have the Toshiba Satellite L300-1 to 3 with Windows Vista Home Premium as the operating system. After you modify the partitions on my drive, I tried to install Windows XP in a system dual boot, but this isn't the case at all. I have question,

  • Questions to open any .exe files

    Hello I have problems to open all my .exe files. happened after I installed security software. I already tried your suggestions about the site, but I can't seem to run 'command', in order to go further. I think that there are problems with my file as

  • installeren Photoshop

    HelloIK heb een net cloud creative aangekocht & toch kan ik geen photoshop openen. Adobe zegt dat er geen purchase is gebeurd met mn apple ID.Wat moet ik doen? Kan geen programma 1 van aangekochte s bloodstains.MVG,Barbara