Ethernet controller does not work on the Satellite L645D-S4030

Basically, I got my windows 7 reinstalled on my laptop due to virus... Now I have a problem with the Ethernet controller does not, I checked my device manager and there is a kind of yellow dash through the icon... Someone knows what is the problem and how can I solve this problem?

BTW, I have a SATELLITE L645D-S4030

Hey Buddy,

Hmm generally if you reinstall Toshiba Recovery disk Windows all drivers will be installed too because the disc contains a picture of the factory settings.
Or you used another drive?

Yellow exclamation mark can mean that there is a driver problem and so it would be advisable to reinstall the LAN driver. Follow the link Timox. After the driver is installed, restart your computer and check again in Device Manager. The yellow exclamation point should normally be gone.

Tags: Toshiba

Similar Questions

  • From my computer [windows xp] crashed and had his memory is erased and now my Ethernet controller does not work. The multimedia Audio Controller does not work either.

    Title says it all, I have had all the serv pack 3 so

    If you format your hard drive and reinstall Windows, then if possible put in all day and if not because of the ethernet connection, and then try to search for devices that has problem and download their drivers.

  • Nokia PC Suite does not work on the Satellite A100-234

    I installed the Nokia PC Suite in my laptop (Satellite A100-234) Unfortunately his does not work. The same cable and Mobile is to connect with other computers.

    Please send your valuable suggestions.

    Hello

    Could you please be more specific?
    Did you get the error messages or something else?

    Maybe something is wrong during the installation procedure
    So I recommend removing this Nokia program and try to install it again.

    In addition, I would recommend checking the PC Suite FAQ on the website

  • 2.60 BIOS does not work on the Satellite A200 - 22 c

    Hi all

    I made the mistake to Flash my old bios Satellite A200 - 22 c (PSAE6E) to the new version 2.60.

    As I did this, the keyboard does not work on the bios screen, so I am unable to manage anything in the BIOS.

    When Windows Vista 32B starts the first time, the keyboard does not work. If I close the session and then I it again, it works correctly.

    The touchpad is lost and I need to use a USB mouse. Is not a pilot cause problem, all the drivers are updated and are working properly.

    The question is: why Toshiba didn't allow users to download the old version of the BIOS? ¿WHERE or who do I contact to get the original BIOS? Why do the flashing utility make a backup of the OLD BIOS and then does not give you the ability to recover it?

    Please, help me to recover the original BIOS to retrieve my keyboard and my touchpad because I can´t find any message or anything like that to get in touch with the technical support of this web site.

    Thank you!

    Which version was old BIOS?

    By the way: you can contact Toshiba. They have access to the Archives of BIOS and they can provide you with older version of BIOS.

  • Wireless controller does not work, said the controller is not an installed device

    My "network controller" does not work it says... And he did my wireless doesn't work don't as well.
    It happened when I installed Windows 7 Ultimate on my Acer Aspire 5542 G. It just says: the network controller is not an installed device or something. I'm not smart with this kind of thing. So can somebody seriously help out me?
    I tried to go to the main web site... But nothing will do it. 0: Yes... And I even tried updating the driver but he just said that he does on windows update...

    Theres 4 here wireless LAN drivers . Select Notepad / sucks / 5442G.

    But you will need to know if its Atheros QMI or Foxconn.

    If this is the wireless on board. If its got one? in Device Manager, double click on it go to the Details tab / change hardware ID's for one of the entries, copy and paste it here.

    Or if you want I could have a glance with teamviewer.

    You'll see what I'm doing. If you get it give me the ID and password, it gives you

    Or if you have Skype, my Skype name is the same name I use here

  • Pad touch and function Fn + F5 does not work on the Satellite a series

    Hello

    I just install a windows Vista & I have install the driver after download it from the net, but I found this;

    1 - switch between the screen & s-video (fn + f5) does not work but the other work of function (fn)

    2 when I put my finger in the right of the mouse pad you have to scroll the screen & at the bottom of the touchpad, it should scroll left & right on-screen, but it did not work

    So please tell me the solution if it is a problem of driver or program.
    Please give me the direct link

    thinku

    Hello

    What cell phone do you have?

    I imagine that your laptop comes with XP and now want to use it with Vista OS.
    Please note that you should install the Package Toshiba Vista value added to use all the features of the laptop.
    Very important is the pilot of common components and the TOSHIBA Flash Cards.
    The Flashcards provides the Hotkey function and function of pitcher who starts the Hotkey function.
    Please reinstall!

    The additional touchpad functionality must be configured first.
    This can be done in the control panel-> mouse

    Here, you should look for the touchpad settings and able to configure touchpad again scroll areas.

    Good bye

  • Driver Chicony webcam does not work on the Satellite A200-13O

    After the misfortune that occurred to my webcam, I tried to fix it by uninstalling the driver and then put it back in place (by the toshiba Web site).
    I did this twice and it does not work,
    allthought the pc installed the driver, the camera was not working because a file was for win95 and my pc has vista.

    After several reboots, I made the following
    -Start
    -all programs
    -camera assistant software
    -Right click
    -options (the last button in the right click menu...)
    -compatibility
    -Select work in win95 compatibility
    -ok
    Sorry for my English, I am Greek and my menu vista also... :))
    If anyone wants more details please to contact me.
    I hope this could help those in despair...

    Hello

    Yes I would like some details;).

    For example: manufacturer who is the camera, it is built, made, he has worked previously, and so on...

    So there is a lot to say, have you ever said to the second part, but I'm missing a few things as I've described above. By the way: you can try to recover your machine, if you really need on your camera, but it is really the LAST RESORT.

    Good bye
    John

  • Graphics card does not work on the Satellite L850 PSKFWA

    Hello

    I have a Satellite XC 250895 Q. Windows 8 keeps giving me a message that my graphics card does not work correctly.
    I go to the Radeon website and click on the appropriate boxes and let Radeon check my system to see if the drivers are up to date. He tells me that I have to download something (?) New driver) but when I do it tells me there is a problem with the compatibility with my system.

    I haven't noticed any problem with the graphics.
    It may be a Radeon problem, but what I have on my system, which was installed at the factory.

    Thanks for everything back
    Hetty

    + The message was edited: model nr. Add the object +.

    Can you please tell us once more what model of laptop you have exactly?
    Are you using the original Win8 preinstalled?

  • Keyboard light FN (F6 - F7) does not work on the Satellite A200 - 1 GM

    Hello

    I turned on the Toshiba Satellite A200 - 1 g, a screen is almost completely obfuscate and try to lighten it, but it fails Fn...

    Note:

    Keyboard of the hospital should operate outside the windows, so that? ... then it may be a hardware failure?

    Please check what I could fix it, I would probably be reinstall everything in terms of software Satellite A200 - 1 g

    drivers: http://ce.computers.toshiba-europe.com/innovation/jsp/supportMyProduct.do?service=CE&LNG=21&userAction=S MP_RESULTS_PAGE & partNumber = PSAECE-02C004CZ & serialNumber = k 87324302 & USER_ACTION = 20number % series

    Thanks in advance for the advice...

    Wait a minute I m a bit confused.

    When you start your laptop wait until the operating system load and then try to use the FN + F7. If this does not work, try changing the brightness of the display in power settings. It work?

    You can use other functions FN?
    Are you using the Vista operating system?

    By the way: what is keyboard hospital?

  • WIFI does not work on the Satellite L650/078

    Hello
    Hoping someone can help, on my Satellite L650 WIFI does not work.
    No Wifi or Bluetooth functionality. The light is not on and the function key is not brining to the top of all the options.

    Any ideas on how to solve this problem?

    Hello Covie

    Do you use the laptop with the factory settings?
    When you use the FN button you find cards flash at the top of the screen?

    Try please restart flash cards. Start > all programs > Toshiba > utilities.

    Please post comments.

  • For Portege 3490 AC adapter does not work with the Satellite A100-159

    I have a supply of 15V 120W car (or plane Kensington). It works very well with a Portege 3490CT. It doesn't do a thing with my Satellite A100-159 new. The power supply provides also 15 V 6 a. Can someone tell me why the Kensington work?

    Or does anyone have a diagram to a power supply adapted myself, preference of 11, 5-14, 12(4) and 24 VDC (23-28: 8)?

    Thanks in advance!

    Hello

    I can give t you an answer why it does not work but usually you need to use the adapter for vehicle recommended by Toshiba. Incorrect adapter may damage the laptop!
    I think that the card for Portege 3490 adapter is not compatible with Satellite A100

    That the two car/truck/Air 120W laptop charger must be compatible:
    PX1237E-1NPO
    PX1235E-1NPO

  • Touchpad does not work on the Satellite A100-812

    Hello, I just bought a Toshiba Satellite A100-812 (C. Duo, 2 GB RAM, GF 7600, Vista Premium). I disabled the synaptics driver in msconfig. After a while, I turned on the driver but Touchpad still does not work. All the fn buttons work correctly (turning brightenswith FN + F6 or FN + F7 etc.) but FN + F9 (turning the Touchpad) does not always work.
    Help, please.

    ([email protected])

    Hello

    you did a reinstallation of the driver? I think that if you have disabled it with msconfig, it should work after reactivation and otherwise, to remove this driver and install it
    Once again. (So the touchpad) driver should be available after reinstalling and restarting Windows.

    Would be recognizing a few comments if it worked. :)

    Welcome them

  • Motion controller does not work on the Qosmio G50

    Hello

    as well as problems with my touchpad that I can't seem to get the job and my fn + f9 that does not work, I discovered today that my gesture controller no longer works?

    I went on the site of toshiba europe and downloaded the latest driver for it but once again, I received the message "an error has occurred in the toshiba quad core processor HD = 0x800A0100 code?

    Any help would be wonderful that its driving me around the bend!

    > as well as problems with my touchpad that I can't seem to get the job and my fn + f9 that does not work, I found out today that my gesture controller no longer works?
    So much trouble, you got there. You may create a Groove and reinstall the original recovery image. After having done this you own preinstalled OS and with the factory settings, everything should work again.

    What do you think about this?

  • Touchpad does not work on the Satellite a series

    Greetings!

    I have Toshiba Satellite and I have a touchpad issue.
    My touchpad does not work. I downloaded the drivers for it, and it still does not.

    Is someone can you please help me solve this problem?

    Thank you.

    What do you exactly mean with it s not working do not?

    What cell phone do you have? Have what the touchpad driver you installed?

    Have you checked if the touchpad was not disabled?
    Using the FN + F9 key combination, you can disable and enable the touchpad feature!

  • Video hardware does not work on the Satellite A100

    I have a satellite A100 and since my laptop has crashed by using Windows Movie maker videos do not play properly. Windows Vista has identified the problem as a video hardware error and after updating the driver BIOS and nVida as it says, it still does not work. Oddly enough, it works very well on Quicktime, but not Windows Media Player. I would be very grateful if someone get to help resolve me this problem.

    Hello

    installed a codecpack? Because how you describe this problem, it seems it s a pure software thing. If it works with Quicktime then Don t you have hardware problems.

    So, try the following:
    Google for "codecpack vista" and install it. Give feedback if it worked, otherwise you have to look any further...

    See you soon

Maybe you are looking for

  • problem with url target

    Sometimes when I chat on facebook I left the mouse above a link by erroneous and their below to the target of the link. When the url too long covering the line completely. It's so annoying because I did not see what I wrote. Screenshot: http://i.imgu

  • EPOS Intitialise

    Hi all We are motor control EC maxon with the help of the EPOS2 position controller. We use LabVIEW to communicate with EPOS2 using USB serial port. After the development of the program, when we click Run, a dialog box (called 'Open Device') opens pr

  • Can not open opening Adobe Photo DeLuxe 4.0 said not enough memory RAM

    Original title: opening Adobe Photo DeLuxe 4.0 Does not open, says not enough memory RAM. I have 6 GB of RAM!

  • Source: User profile Service event ID: 1530 level: WARNING

    Hello. I use a Windows 7 Home Premium OS, when I was checking on my event viewer I've found a warning that says: Windows detected your registry file is still in use for other applications or services. The file will be unloaded now. Applications or se

  • Should wich version I expect?

    HelloWe are about to install a vCenter operations Standard in our environment. And when I got to the download page it makes me a bit confused. Whick version is the latest? Should what version I download? and so on.I see on the site of vcops-pubsvCent