Ethernet/IP: ControlLogix bad reports class with Demo.vi

Similar Questions

• How to replace a bad IDE disk with a USB Flash drive system - and have all the functionality of XP Pro SP3

  How to replace a bad IDE disk with a USB Flash drive system - and have all the functionality of XP Pro SP3
  Given a PC without hard disk...
  How can you use a flash drive instead?
  So, indeed, the USB key works as an SSD...
  I saw online options that gives partial functionality of the system... and an option that is more than $100 (more than the system's worth)...
  None of these options are acceptable in the circumstances.
  It is an effort to create a machine for a particular use, built from a recycled pc for which hard drive was removed and destroyed by the original owner...
  The criterion is that it must work just like it was a mechanical drive running xp pro sp3 with all updates, etc...
  Thanks for any help.

  You can not install XP on a Flash as his unsupported drive. Your only two options are a traditional hard drive or Solid State Drive (SSD).

  J W Stuart: http://www.pagestart.com

• CSQ Call Distribution summary report customized with 5s and 20 s model for UCCX 10.6 required

  Dear all,

  We have UCCX with recently upgraded to 10.6 HA. After upgrade, we are not able to generate the CSQ Call Distribution report for every 5/20 sec.

  We contacted TAC and found we need to have autonomous cuic but we donot have in our environment. There is demand for improvement already triggered with Cisco for this defect, Cisco still to develop fixed a bug for this version.

  Ask you to provide me with this model of the said report to import into our UCCX of 10.6 to generate reports required by our care.

  Had the same problem after upgrade of 8.5 to 10.5 UCCX. I was able to modify an existing report to get 5 seconds interval.

  I exported the existing report. Imported in CUIC stand-alone server, query list value with interval of 5 seconds:

  select 5 as ID,'5' as value from table(set {1})

  Also changed the column names in the report. With 5 seconds interval, we have 4 great call distribution intervals: 0-5 sec, 0 to 10 sec, 0-15, 0-20 sec. Unfortunately, when I downloaded my report to the initial report UCCX CUIC was broken (I think because of the internal report id duplication), but the new report works very well. Check out the screenshots and my below custom report template.

• call report forms (with or without parameters) oracle apex

  Hello

  I want to know if I can call report forms (with or without parameters) oracle apex?

  Thanks in advance

  Try to look at this blog: Roels Blog: integration of forms and the APEX: APEX calling forms

  Thank you

  Tony Miller
  Software LuvMuffin
  Ruckersville, WILL

• Can extend us the document class with a custom flash as3 class?

  Hello
  Can extend us the document class with a custom flash as3 class?

  Thank you
  Mallek

  Try:

  amishap67776642 wrote:

  package

  {

  public class accessories extends ScreenBase

  {

  public void accessories()

  {

  Super();

  addEventListener (Event.ADDED_TO_STAGE, onAddedTostageHandler)

  }

  private void onAddedTostageHandler(e:Event):void

  {

  Super.init ();

  }

  }

  }

  / * class ScreenBase * /.

  package

  {

  SerializableAttribute public class extends MovieClip ScreenBase

  {

  public void ScreenBase)

  {

  Super();

  }

  public void init (): void

  {

  MovieClip (that).tutorialBox_mc.visible = true;

  }

  }

  }

• Publish reports migration with graphic functions.

  Hi guys,.
  I'm working on the relationship between 10g and 11g migration and I have a problem with the reports that contains a chart. They give the following error when I run them against the report of 11g Server (they work very well against the server 10g with on all issues)
  
  The report stopped with the error:
  REP-56048: engine rwEng-1 crushed., job Id: 24.
  
  I searched on Google for a solution to fix them, the closer, I found was install Oracle Graphics 6i engine in a House separate from the Oracle, but this has been said for 9i and 10g, you can find that in the oracle document below:
  
  http://www.Oracle.com/technetwork/middleware/reports/graph-FAQ-with-style-094084.html#Q101
  
  Do anyone knows if I can 6i engine install Oracle Graphics in a separate Oracle 11 g House too?, so that they work at least, if not to change those that exist?
  
  Thank you
  Sona.

  Hello Sona,
  Unfortunately installation chart 6i to one OH for 11g will not work. This option is possible as long as 10g as a temporary option during migration to the BI beans new chart features in gr 10, 2 and 11 g.

  Reference
  http://www.Oracle.com/technetwork/middleware/reports/graph-FAQ-with-style-094084.html

  Migration Oracle Graphics graphics 6i

  How can I migrate my Oracle graphics cards to the new chart format in reports of Oracle9i or Oracle10g reports?

  Oracle9i Release 1 go, graphical reports from Oracle was desupported. Reports of Oracle9i and Oracle10g use BI beans to generate graphs. Because of the underlying technology, there is no way to direct migration of Oracle Graphics to the bean BI graphing functionality. Therefore, the user will need to rewrite all their new graphics with the graphic Wizard in Report Builder.

  Top of Page

  Can I still use my Oracle Reports Developer 6i existing reports with graphical charts Oracle Oracle reports?

  As stated in the declaration of the Oracle reports, Oracle Graphics is no longer ships with Oracle Reports. However, as part of the migration route, you can still run Oracle Oracle reports graphic graphics if you install Oracle 6i graphics engine in a separate Oracle home. You must only maintain graph Oracle 6i as a temporary measure while redesign you your new charts using the chart wizard. For more details on configuring Oracle to use Oracle Graphics 6i, see Migration of graphics in the Oracle9i Application of Oracle9iAS version 1 (1.0.2.2.x) Server Migration manual version 2 (9.0.2).

  Top of Page

  Can I change or add diagrams of 6i, Oracle Graphics to my reports with Oracle9i reports or reports from Oracle 10 g?

  N ° you must have a separate installation of Oracle 6i graph generator to change your existing graphic Oracle 6i graphics since Oracle Graphics is not delivered with Oracle Reports. We strongly recommend that you migrate your cards to the new standard in the Oracle reports.

  Thank you, RZ

• How to connect Forms 6i and reports 6i with oracle 10g R2?

  Hey everybody,
  
  I need your help in linking the two Forms 6i and reports 6i with Oracle 10 g Release 2 db, MS Access(2003, 2007) and SQL database (Microsoft Visual Studio 2008). I am a newbie. I installed all the on my laptop HP with Windows 7 installed Ultimate(32 bit OS). I want to generate reports and forms by accessing data from databases mentioned above. Please provide me with the configuration steps.
  
  Thanks in advance...!

  Being new to the forum, I encourage you to consider the following before you post much more:

  http://blogs.Oracle.com/Shay/entry/10_commandments_for_the_otn_fo

  As for your question, I hope that you read my posts.

  As I mentioned, form/reports 6 is very old and operating systems, you suggested that you will use are very new. This version of F/R is obsolete and expected that it works on a new operating system is not realistic. Why are spending you time with such an old version? Even if you're just trying to learn the product, learning with an old version is probably not a good idea.

  The tnsnames.ora file, you need to update is this: c:\orant\net80\admin

  If you want to learn how to use the product in detail, you probably won't be able to do it in a forum. It is not as if we were trying to learn MS Notepad. Forms/States (and all Oracle products) are enterprise-level products. All products Oracle would require that you spend time to review documentation and in many cases attend some courses to always be effective using them. You can find documents and training in countless places, including within the site of the Oracle. I recommend that you consider that your place of departure.

  Here are some examples:

  Forms of technical documents for most of the versions:
  http://www.Oracle.com/technetwork/Developer-Tools/Forms/Overview/index.html

  11.1.2 of Documentation Forms Library:
  http://docs.Oracle.com/CD/E24269_01/index.htm

  Archived forms documentation:
  http://www.Oracle.com/technetwork/documentation/dev-arch-093406.html

  Oracle Forms - Oracle Education
  http://education.Oracle.com/pls/web_prod-PLQ-dad/db_pages.GetPage?page_id=501

  The forms and the report generator online help is also a good place for more information that in some cases, the sample code is provided.

• Class with variable properties

  Hi, I'm doing a class with 2 properties that you can set when you instantiate this class. The name of the class is ball, and I wrote that I write here:

  package {}

  import flash.display.MovieClip;

  SerializableAttribute public class ball extends MovieClip {}

  private var radiusProp:Number;

  private var lengthProp:Number;

  public void bullet () {}

  }

  public void DefineBall (RADIUS: number, length: number) {}

  this.radiusProp = RADIUS;

  this.lengthProp = length;

  }

  }

  }

  After that, I call this class to create an instance of the following way:

  var BallTest:Ball = new Ball;

  BallTest.DefineBall (10, 3);

  The real thing I want to do is to set these properties in the class and set them when I instantiate the class, but when I tried to do it directly (I used things that make "DefineBall" in the section 'snowball functions' class) I tried instance it and it gave me the same result it gives me now : "(the number of false arguments, it had to be 2 and he gave 0).» And I don't see why. Could you help me, please?

  Class ball. As:

  package

  {

  import flash.display.MovieClip;

  SerializableAttribute public class ball extends MovieClip

  {

  private var _radiusProp:Number;

  private var _lengthProp:Number;

  public function get RADIUS (): number {return _radiusProp ;}

  public function set radius(value:Number):void {_radiusProp ;} value =

  public function get length (): number {return _lengthProp ;}

  public function set length(value:Number):void {_lengthProp ;} value =

  public void Ball (RADIUS: number, length: Number)

  {

  _radiusProp = RADIUS;

  _lengthProp = length;

  }

  }

  }

  Use in the weft AS3 script:

  import of the ball;

  var b:Ball = new Ball (20,100);

  values of trace

  trace ("RADIUS:" + b.radius + ", length:" + b.length);

  b.RADIUS = 500;

  900 = b.Length;

  values of trace

  trace ("RADIUS:" + b.radius + ", length:" + b.length);

  Track:

  RADIUS: 20, length: 100

  RADIUS: 500, length: 900

• Is it possible to open reports (Financial Reporting Studio) with SmartView

  Hello
  
  V11.1.1.2 I would like to know if it is possible to open reports (Hyperion Financial Reporting Studio) with SmartView (Excel).
  If so, should what type of connection I open?
  
  Best regards

  Hello

  Yes, you can

  In the Data Source Manager > select > independent provider connections

  Add + Url provider

  Supplier:-Reporting Hyperion & analysis - 9 system provider
  Location:-http://: 19000/area of work/travel/listxml

  Connect

  In the Hyperion menu > reports & analysis Document > Import

  Select your financial report

  Ok?

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Ethernet cabling 3 extremes of airport with cat 7 cable

  I can configure and wire 3 Airport extreme with ethernet Cat 7 son

  and y at - there a video anywhere showing the configuration of the connection of all base stations 3 with the settings so I'd be badly wired with my apple TV new and also be able to always get wifi throughout the entire House.

  CAT7 is totally useless in a House... and will make no difference to performance.

  Basic wiring is simple ethernet wiring... you do correctly with connections to the central point of patch or the cables from one airport to another?

  If you use the method later... remember to never close the loop.

  The installation is also simple airport point of view... One is the router... unless you have an existing router... all the rest of the units are in Bridge mode and create a wireless network... If you want to that roaming each airport will create a wireless network of the same name... same security setting and password.

  The Apple documentation is way outdated but just look at mobile network.

  Wi - Fi base stations: install and configure a roaming network (802.11 a/b/g/n)-Apple Support

  Wi - Fi base stations: extend the reach of your network wireless by adding additional base stations Wi - Fi - Apple Suppo...

• With the help of my classes with OptimisticNamedCache

  Hello
  
  I learn to use the framework of the Transaction, and I'm stuck on a problem. When I add entries consisting of Java to a NamedOptimisticCache types everything works as expected. If I try to use my own classes as the keys and the values for the entries, it seems that each of my key points to a value zero.
  
  I wrote a simple program with two classes of support and a stripped down in the cache configuration file to illustrate the problem. Their text appears under my signature.
  
  Here is the result of an execution. Note the line that reads: MyKey@fa39d7=null
  
  2011-07-22 19:20:19.949/1.325 Oracle coherence 3.7.0.0 < Info > (thread = main Member, = n/a): responsible operational configuration of "jar:file:/C:/Users/Dan/coherence/lib/coherence.jar!/tangosol-coherence.xml".
  2011-07-22 19:20:20.084/1.460 Oracle coherence 3.7.0.0 < Info > (thread = main Member, = n/a): responsible for operational substitutions of "jar:file:/C:/Users/Dan/coherence/lib/coherence.jar!/tangosol-coherence-override-dev.xml".
  2011-07-22 19:20:20.085/1.461 Oracle coherence 3.7.0.0 < D5 > (thread = main Member, = n/a): configuration optional override ' / tangosol-coherence - override.xml ' is not specified
  2011-07-22 19:20:20.096/1.472 Oracle coherence 3.7.0.0 < D5 > (thread = main Member, = n/a): configuration optional override "/ custom - mbeans.xml ' is not specified
  
  Oracle Version 3.7.0.0 Build 23397 consistency
  Grid edition: development Mode
  Copyright (c) 2000, 2011, Oracle and/or its affiliates. All rights reserved.
  
  2011-07-22 19:20:20.524/1.900 Oracle coherence GE 3.7.0.0 < Info > (thread = main Member, = n/a): configuration of the loaded cache of 'jar:file:/C:/Users/Dan/coherence/lib/coherence.jar!/internal-txn-cache-config.xml '.
  2011-07-22 19:20:20.541/1.917 Oracle coherence GE 3.7.0.0 < Info > (thread = main Member, = n/a): configuration of the loaded cache of 'file:/C:/Users/Dan/diceWorkspace/coherenceTxnFwork/config/cacheConfig.xml '.
  2011-07-22 19:20:22.411/3.787 Oracle coherence GE 3.7.0.0 < D4 > (thread = main Member, = n/a): TCMP linked to /192.168.15.2:8088 using SystemSocketProvider
  2011-07-22 19:20:26.763/8.139 Oracle coherence GE 3.7.0.0 < Info > (thread = Cluster, Member = n/a): created a new cluster "cluster: 0x96AB ' with members (Id = 1, Timestamp is 2011-07-22 19:20:22.449, address = 192.168.15.2:8088, MachineId = 26370, location = machine: in-laptop, process: 8704, role = DemoDemo, edition = Grid Edition, Mode = development, CpuCount = 2, SocketCount = 2) UID = 0xC0A80F02000001315313A83167021F98
  2011-07-22 19:20:26.775/8.151 Oracle coherence GE 3.7.0.0 < Info > (thread = main Member, = n/a): started cluster name = cluster: 0x96AB
  
  Group {address = 224.3.7.0, Port = 37000, TTL = 4}
  
  MasterMemberSet
  (
  ThisMember = member (Id = 1, Timestamp is 2011-07-22 19:20:22.449, address = 192.168.15.2:8088, MachineId = 26370, location = machine: in-laptop, process: 8704, role = DemoDemo)
  OldestMember = member (Id = 1, Timestamp is 2011-07-22 19:20:22.449, address = 192.168.15.2:8088, MachineId = 26370, location = machine: in-laptop, process: 8704, role = DemoDemo)
  ActualMemberSet = set of members (size = 1, BitSetCount = 2.
  Member (Id = 1, Timestamp is 2011-07-22 19:20:22.449, address = 192.168.15.2:8088, MachineId = 26370, location = machine: in-laptop, process: 8704, role = DemoDemo)
  )
  RecycleMillis = 1200000
  RecycleSet = member (size = 0, BitSetCount = 0 set
  )
  )
  
  TcpRing {connection = []}
  IpMonitor {AddressListSize = 0}
  
  2011-07-22 19:20:26.846/8.222 Oracle coherence GE 3.7.0.0 < D5 > (thread = Invocation: management, Member = 1): service management joined the cluster with the senior members of the service 1
  2011-07-22 19:20:26.947/8.323 Oracle coherence GE 3.7.0.0 < Info > (thread = main, Member = 1): configuration of the loaded cache of 'jar:file:/C:/Users/Dan/coherence/lib/coherence.jar!/internal-txn-cache-config.xml '.
  2011-07-22 19:20:27.544/8.920 Oracle coherence GE 3.7.0.0 < Info > (thread = main, Member = 1): configuration of the loaded cache of 'jar:file:/C:/Users/Dan/coherence/lib/coherence.jar!/internal-txn-cache-config.xml '.
  2011-07-22 19:20:27.581/8.957 Oracle coherence GE 3.7.0.0 < D5 > (thread = DistributedCache:TransactionalCache, Member = 1): Service TransactionalCache joined the cluster with the senior members of the service 1
  2011-07-22 19:20:27.790/9.167 Oracle coherence GE 3.7.0.0 < Info > (thread = TransactionFrameworkThread, Member = 1): version Manager started
  2011-07-22 19:20:28.178/9.554 Oracle coherence GE 3.7.0.0 < D5 > (thread = DistributedCache:TransactionalCache, Member = 1): transactional high cabinets: 10 M
  1 = dog
  2011-07-22 19:20:28.935/10.311 Oracle coherence GE 3.7.0.0 < D5 > (thread = DistributedCache:TransactionalCache, Member = 1): transactional high cabinets: 10 M
  MyKey@fa39d7=null
  2011-07-22 19:20:29.319/10.695 Oracle coherence GE 3.7.0.0 < D4 > (= ShutdownHook thread, Member = 1): ShutdownHook: cluster node to stop
  2011-07-22 19:20:29.323/10.699 Oracle coherence GE 3.7.0.0 < D5 > (thread = Cluster, Member = 1): Service de Cluster in the cluster on the left
  2011-07-22 19:20:29.339/10.715 Oracle coherence GE 3.7.0.0 < D5 > (thread = DistributedCache:TransactionalCache, Member = 1): Service TransactionalCache left in the cluster
  2011-07-22 19:20:29.340/10.716 Oracle coherence GE 3.7.0.0 < D5 > (thread = TransactionFrameworkThread member = 1): repeat AggregateAllRequest for 257 of 257 points due to the redistribution of PartitionSet {0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31, 32 33, 34, 35, 36, 37, 38, 39, 40, 41, 42, 43, 44, 45, 46, 47, 48, 49, 50, 51, 52, 53, 54, 55, 56, 57, 58, 59, 60, 61, 62, 63, 64, 65, 66, 67, 68, 69, 70, 71, 72, 73, 74, 75, 76, 77, 78, 79, 80, 81, 82, 83, 84, 85, 86, 87, 88, 89, 90, 91, 92, 93 94, 95, 96, 97, 98, 99, 100, 101, 102, 103, 104, 105, 106, 107, 108, 109, 110, 111, 112, 113, 114, 115, 116, 117, 118, 119, 120, 121, 122, 123, 124, 125, 126, 127, 128, 129, 130, 131, 132, 133, 134, 135, 136, 137, 138, 139, 140, 141, 142, 143, 144, 145, 146, 147, 148, 149, 150, 151, 152, 153, 154 155, 156, 157, 158, 159, 160, 161, 162, 163, 164, 165, 166, 167, 168, 169, 170, 171, 172, 173, 174, 175, 176, 177, 178, 179, 180, 181, 182, 183, 184, 185, 186, 187, 188, 189, 190, 191, 192, 193, 194, 195, 196, 197, 198, 199, 200, 201, 202, 203, 204, 205, 206, 207, 208, 209, 210, 211, 212, 213, 214, 215 216 217, 218, 219, 220, 221, 222, 223, 224, 225, 226, 227, 228, 229, 230, 231, 232, 233, 234, 235, 236, 237, 238, 239, 240, 241, 242, 243, 244, 245, 246, 247, 248, 249, 250, 251, 252, 253, 254, 255, 256}
  2011-07-22 19:20:29.345/10.721 Oracle coherence GE 3.7.0.0 < D5 > (thread = Invocation: management, Member = 1): service management left the cluster
  
  
  Thank you.
  
  -Dan
  
  Demo program illustrates the problem
  
  to import java.util.Set;
  java.util.Map.Entry import;
  import com.tangosol.coherence.transaction.Connection;
  import com.tangosol.coherence.transaction.DefaultConnectionFactory;
  import com.tangosol.coherence.transaction.OptimisticNamedCache;
  
  public class Demo {}
  
  /**
  @param args
  */
  Public Shared Sub main (String [] args) {}
  
  This block of code shows Java native types work ok.
  Connection con = DefaultConnectionFactory() new
  .createConnection ("TransactionalCache");
  OptimisticNamedCache txCache = con.getNamedCache("txCache");
  txCache.put (1, "dog");
  con. Close;
  The value < entry > tCacheEnts = txCache.entrySet ();
  for (entry e: tCacheEnts) {}
  System.out.println (e);
  
  }
  
  This block of code illustrates the problem I have with my own types.
  Con1 connection = new DefaultConnectionFactory()
  .createConnection ("TransactionalCache");
  OptimisticNamedCache txCache1 = con1.getNamedCache("txCache1");
  Key MyKey = new MyKey();
  Value of MyValue = new MyValue();
  key.setId (1);
  value.setStrValue ("ONC1");
  txCache1.put (key, value);
  Con1.close ();
  The value < entry > t1CacheEnts = txCache1.entrySet ();
  for (entry e: t1CacheEnts) {}
  System.out.println (e);
  
  }
  }
  }
  
  My custom key class
  import java.io.Serializable;
  
  
  MyKey/public class implements Serializable {}
  Whole ID;
  
  public Integer getId() {}
  return the id;
  }
  
  {} public void setId (Integer id)
  This.ID = id;
  }
  
  public MyKey() {}
  }
  }
  
  My custom value class
  
  import java.io.Serializable;
  
  
  MyValue/public class implements Serializable {}
  String strValue;
  
  public String getStrValue() {}
  return strValue;
  }
  
  public void setStrValue (String value) {}
  this.strValue = value;
  }
  
  public MyValue() {}
  }
  
  }
  
  
  
  My config of cache
  
  <? XML version = "1.0"? >
  
  <! SYSTEM cache-config DOCTYPE "cache - config.dtd" >
  
  <>cache-config
  
  < cache-system-mapping >
  
  <>cache-mapping
  < name of the cache - > * < / cache-name >
  < scheme name > example distributed < / system-name >
  < / cache-mapping >
  
  <>cache-mapping
  < name-cache > tx * < / cache-name >
  < scheme name > transactional example < / system-name >
  < / cache-mapping >
  
  < / cache-system-mapping >
  
  
  <>- cached patterns
  <!--
  Distributed caching scheme.
  ->
  < distributed plan >
  < scheme name > example distributed < / system-name >
  < service name > DistributedCache < / service-name >
  thread < lease-granularity > < / lease-granularity >
  thread < number > 100 < / thread count >
  
  < support-map-plan >
  < local plan >
  <>plan-unlimited-support-map Ref < / plan-ref >
  < / local plan >
  < / support-map-plan >
  
  < autostart > true < / autostart >
  < / distributed plan >
  
  < transactional system >
  < scheme name > transactional example < / system-name >
  < number > 10 threads < / thread count >
  < service name > TransactionalCache < / service-name >
  < request-timeout > 30000 < / timeout request >
  < support-map-plan >
  < local plan >
  <>plan-unlimited-support-map Ref < / plan-ref >
  < / local plan >
  < / support-map-plan >
  < autostart > true < / autostart >
  < / transactional system >
  <!--
  Card support schema definition used by all caches that are not
  require expulsion policies
  ->
  < local plan >
  < scheme name > unlimited-support-map < / system-name >
  < / local plan >
  
  < / cache-plans >
  < / cache-config >
  
  Published by: dan_at_scapps on July 22, 2011 11:14

  Hi Dan,.

  Your key should implement equals() and hashCode(). Something like...

  
         public int hashCode()
              {
              return id;
              }
  
          public boolean equals(Object o)
              {
              if (o instanceof MyKey)
                  {
                  MyKey that = (MyKey) o;
  
                  return id.equals(that.id);
                  }
  
              return false;
              }
  

  Thank you
  Tom

• in real time, take notes during classes with the stylus

  Hello

  There was this other thread to pdf-annotation, but I need to know if the unit is really able to take handwritten notes without too much latency. I don't want to use any OCR because my main goal is to write mathematical stuff for classes which is a nice OCRable. He may also be involved, that then maybe a scetching software would be better suited as 'MyScript Notes mobile' design. And this must be done in good time before the teacher clean the Blackboard. So do you think this is possible with theThinkPad tablet?

  ThinkPad Tablet 32gig... and love it!

• name of the dot net class with variant

  Hello, I'm having a problem with .NET and Labview and I am sure that you will be able to help me.

  I have several dll in dotNET with their class name and I need to get the name of the class programmatically. All references of dotNET go inside a variant and I can see in the name of her variant of the name of the class, so I would read the name of variant and then through a case structure make a Variant to the data programmatically. I can't find a way to get the variant name, but I don't know there is a way to get it. I'll post some screenshots which may better explain my goal (sorry but I'm still not a Labview expert + dotNET). A class is called SHF 615 A, one is named SHF 614 A

  Thanks in advance for the help!

  
  

• publish a report xml with LabVIEW

  All,

  I'll try to find a solution to my problem and I hope someone out there has an idea for me to try.

  My problem is I want to launch a test .xml report (which was created with TestStand) using LabVIEW for a user to view/print.  I created a simple vi of drop-down lists for a user to select the report that they want to see and I spent one way; the problem is that I do not know how launching this .xml in a kind of Viewer, my idea was to use internet explore, because it's the print controls, but the only function I can find to help "Open a URL in the default browser" and the error I see is attached (looks like I sends you something he dislikes) (, so I don't know if this feature is available for what I need because the links of my path to my files correctly with windows Explorer).

  A bit of history, I'm basically just trying to restrict the user to only view reports and not navigate around in my directories and then add this control to my operator TestStand Interface (I use the simple interface for TestStand 2012), its as simple as that.

  My question has 2 components:

  (1) anyone would be able to start on the path to open a xml report in Internet Explorer using LabVIEW?

  (2) does anyone know of a better way to solve this problem?

  Thank you

  Bill

  You can use a container of the WebBrowser .NET - believe it will display XML without problem, and then you can simply call the method 'print '.

• Why Windows XP Professional give me error messages 'Bad Image'? With reference to dll32.exe files.

  Why Windows XP Professional give me error messages 'Bad Image'?

  With reference to dll32.exe files.
  \Windows\system32\MSACM32.dll is not a valid system image. Please check this against your installation diskette.
  Other messages relate to the specific 32dll.exe of the application
  It seems to me that the msacm32.dll talk of restore point for system restore.
  Thank you
  Greg

  Hello

  1. What is the number of brand and model of the computer?

  2. you remember recent changes made on the computer before the sissue?

  3. What is the service pack installed?

  4. do you have the Windows XP disc?

  Run the checker system files on the computer. Link, we can see: Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe): http://support.microsoft.com/kb/310747