Ethernet problem W700 after hibernation after installing Win 7 SP1

Similar Questions

• Satellite C650 - after installing Win 7 SP1, computer does not start

  Hello

  When I tried to launch the Win 7 Service pack 1 update, it 'impossible' and now I can't start my computer, even in safe mode. When I turn it on, no matter what I do (including let it run or by pressing F8) results in the message:

  "For Atheros PCIE Ethernet Controller v2.0.1.0 (15/12/09)
  Check the connection of the cable!
  PXE - M0F: Exit Intel PXE - ROM
  No boot device - insert boot disk and press any key ".

  i.e., I can't go to the start menu.

  The only thing I can access is the utility Boot screen by pressing F12. Experience with Service packs, I'm trying to access the system restore to undo the update, but I can't get there.

  Win 7 came preinstalled on my computer and my computer was working fine before I tried to install SP1, so all the solutions / advice would be much appreciated!

  Thank you

  Hello

  When you see this message PXE for some reason laptop cannot detect the HARD drive and use it as a boot device.
  Enter please the BIOS settings and check if the HARD drive is listed correctly there. By default the BIOS settings and try to restart your laptop.

  Please post comments.

  BTW: you created the recovery DVDs?

• R850-14 t - FN feature satellite lost after installing Win 7

  Hey,.

  After Installing Win 7 32 bit, I had no functionality of FN.
  I tried to find and also tried some drivers on the homepage, but I don't have the right one.

  If some know what driver I need exactly?

  Thank you!

  Hi mate

  Did you install VAP (value added package)?
  If this is not the case, to do this. After that, restart the laptop and check the functionality of the FN button.

  If the FN button would not work, install utility Support Flash Card which you could find in the box driver for other portable computer laptops; for example L500

  Greetings

• Can satellite A300d-16W - I use HARD drive recovery after installing Win XP?

  I formatted my PC and installed XP. Can I reinstall Vista using HARD drive recovery?

  > I formatted my PC and install XP

  No, you cannot use the recovery HARD drive after installing Win XP because looks like you have formatted the HARD drive and the HARD disk partition has been erased.

  So you need to use the Toshiba Recovery disk that I hope, you created before you formatted the HARD drive.

  Greetings

• Disc Association file missing after installing windows 7 SP1,.

  After installing windows 7 SP1, trying to open the drives C, D, F, I get error message cannot open, lack assocition file, can someone tell me how to solve this

  Restore the Type Associations by default Windows 7 file Extension:
  http://www.SevenForums.com/tutorials/19449-default-file-type-associations-restore.html

  Change the programs that Windows uses by default:
  http://Windows.Microsoft.com/en-us/Windows7/change-which-programs-Windows-uses-by-default

  JS
  http://www.PAGESTART.com

  Never be afraid to ask. This forum has some of the best people in the world to help.

• 70073712 error code when you try to install Win 7 SP1

  I am using Windows 7 32 bit on a machine with 4 GB of RAM 540 i3.

  I get error code 70073712 when trying to install Win 7 SP1 via windows update.

  I disabled all startup programs and services not microsoft.

  I ran the fix - it utility and update v10 system utility preparation x 86.

  I have still some errors on the log to check ON that I can't fix, I don't know if they help or not.  Log is shown below:

  =================================

  Preparation of control system was updated.

  Binary version 6.1.7601.21645

  Package Version 11.0

  2011-02-25 22:18

  Checking Windows Service Packages

  Checking of manifests package and catalogs

  Checking package Watchlist

  Watchlist checking

  Checking packages

  Control components store

  (f) CSI Manifest and S256H Do Not Match0x00000000 winsxs\Manifests\x86_microsoft-windows-smbserver-common_31bf3856ad364e35_6.1.7600.16664_none_03c12997716b5264.manifestx86_microsoft-windows-smbserver-common_31bf3856ad364e35_6.1.7600.16664_none_03c12997716b5264

  (f) CSI Manifest Failed Catalog Check0x00000000 winsxs\Manifests\x86_a3a447e7a026fd8b08eef9015c3fd303_b77a5c561934e089_6.1.7600.20717_none_3c3b72980dd0607e.manifestx86_a3a447e7a026fd8b08eef9015c3fd303_b77a5c561934e089_6.1.7600.20717_none_3c3b72980dd0607e

  (f) CSI Manifest Failed Catalog Check0x00000000 winsxs\Manifests\x86_microsoft-windows-smbserver-v1_31bf3856ad364e35_6.1.7600.16664_none_d9e264be57b7d382.manifestx86_microsoft-windows-smbserver-v1_31bf3856ad364e35_6.1.7600.16664_none_d9e264be57b7d382

  (f) CSI Manifest Failed Catalog Check0x00000000 winsxs\Manifests\x86_9edaf6d3bef8e3b8a511c965c4676cc0_b77a5c561934e089_6.1.7600.20717_none_fba4726a5de9641a.manifestx86_9edaf6d3bef8e3b8a511c965c4676cc0_b77a5c561934e089_6.1.7600.20717_none_fba4726a5de9641a

  (f) CSI Manifest Failed Catalog Check0x00000000 winsxs\Manifests\x86_microsoft-windows-smbserver-common_31bf3856ad364e35_6.1.7600.20789_none_043a27fc8a94a8c3.manifestx86_microsoft-windows-smbserver-common_31bf3856ad364e35_6.1.7600.20789_none_043a27fc8a94a8c3

  (f) CSI Manifest and S256H Do Not Match0x00000000 winsxs\Manifests\x86_e8bf52ce827220c20c57727d1ef1b0f3_b03f5f7f11d50a3a_6.1.7600.20717_none_c2175e5f4430b21d.manifestx86_e8bf52ce827220c20c57727d1ef1b0f3_b03f5f7f11d50a3a_6.1.7600.20717_none_c2175e5f4430b21d

  (f) CSI Manifest Failed Catalog Check0x00000000 winsxs\Manifests\x86_5f9114f1cdba6b133e611c33f9d42896_b77a5c561934e089_6.1.7600.16597_none_a1c1ac15f6bb52cb.manifestx86_5f9114f1cdba6b133e611c33f9d42896_b77a5c561934e089_6.1.7600.16597_none_a1c1ac15f6bb52cb

  (f) CSI Manifest Failed Catalog Check0x00000000 winsxs\Manifests\x86_0f7a1a89936e7d82f675294dce25e472_b77a5c561934e089_6.1.7600.16597_none_b566a48eb4b33968.manifestx86_0f7a1a89936e7d82f675294dce25e472_b77a5c561934e089_6.1.7600.16597_none_b566a48eb4b33968

  (f) CSI Manifest Failed Catalog Check0x00000000 winsxs\Manifests\x86_0d9aca2e69a54e84f2113f11119a3945_b03f5f7f11d50a3a_6.1.7600.16597_none_7ca86e604e0c3fd6.manifestx86_0d9aca2e69a54e84f2113f11119a3945_b03f5f7f11d50a3a_6.1.7600.16597_none_7ca86e604e0c3fd6

  Summary:

  Seconds executed: 58

  Found 9 errors

  County of apparent CSI and S256H Do not Match Total: 2

  Manifest CSI has not catalog check the total count: 7

  Unavailable repair files:

  winsxs\manifests\x86_microsoft-Windows-SMBSERVER-common_31bf3856ad364e35_6.1.7600.16664_none_03c12997716b5264.manifest

  winsxs\manifests\x86_a3a447e7a026fd8b08eef9015c3fd303_b77a5c561934e089_6.1.7600.20717_none_3c3b72980dd0607e.manifest

  winsxs\manifests\x86_microsoft-Windows-SMBSERVER-v1_31bf3856ad364e35_6.1.7600.16664_none_d9e264be57b7d382.manifest

  winsxs\manifests\x86_9edaf6d3bef8e3b8a511c965c4676cc0_b77a5c561934e089_6.1.7600.20717_none_fba4726a5de9641a.manifest

  winsxs\manifests\x86_microsoft-Windows-SMBSERVER-common_31bf3856ad364e35_6.1.7600.20789_none_043a27fc8a94a8c3.manifest

  winsxs\manifests\x86_e8bf52ce827220c20c57727d1ef1b0f3_b03f5f7f11d50a3a_6.1.7600.20717_none_c2175e5f4430b21d.manifest

  winsxs\manifests\x86_5f9114f1cdba6b133e611c33f9d42896_b77a5c561934e089_6.1.7600.16597_none_a1c1ac15f6bb52cb.manifest

  winsxs\manifests\x86_0f7a1a89936e7d82f675294dce25e472_b77a5c561934e089_6.1.7600.16597_none_b566a48eb4b33968.manifest

  winsxs\manifests\x86_0d9aca2e69a54e84f2113f11119a3945_b03f5f7f11d50a3a_6.1.7600.16597_none_7ca86e604e0c3fd6.manifest

  Customer experience report downloaded successfully.  Thank you for your participation.  For more information, see the Microsoft Customer Experience Improvement Program on the Microsoft web site.

  Can anyone offer any help on solving this problem and get installed SP1, as I'm stuck now!

  Thank you

  Thomas

  
  

  Hello Thomas_Si,

  Thank you for your message.  Please, try the following steps:

  Since you have already downloaded and run the system update tool, you can move on to step 2.

  1. According to your architecture of Windows 7, download / install and run the tool update system - CheckSur you can download the tool from the links below depending on your system type.

  Download the tool update system (64-bit)

  Download (32-bit) system update readiness tool

  2. click Start type cmd (you should see the command prompt fill up) right click and select run as administrator

  Inside the command prompt, type sfc/scannow

  For more information regarding the file system checker.

  * If corruption is found, see How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  3. once the SFC is finished, check your hard drive for errors.

  4 restart the system update readiness tool. If errors have been eliminated, try to reinstall Service Pack 1. If this is not the case, go to step 5.

  5. perform a Startup Repair, when starting, try to install the Service Pack.

  Please let us know the details of each scan or utility. We can't wait to hear back on your part.

  See you soon

• Problem of HP Mini 110-355 after installing win xp

  Hi every1!

  hope someone could help me soon...

  I have 110-3500 mini hp win 7 (bones included) I have a mini internet shop

  I was able to install win xp (on USB) on my loptop since some of my necessary habit of the software work on win 7.

  but the problems are.

  (1) optical mouse usb does not work! He says: "cannot install, peripheral is dsabled" he keeps saying it, even after activation of the device said on Device Manager and the Device Manager, under HID class, there is an unknown device:

  and: (2) my wifi and and bluetooth does not work (the two are also in the same switch)

  I downloaded and installed any necessary drivers form net but only that both do not work.

  hope to hear any response soon... thank you so mch...

  Hello:

  Please see if the chipset driver helps with this unknown device.

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=ob-89844-1&CC=US&DLC=en&LC=en&os=228&Product=4346351&sw_lang=

  I don't know why your network cards do not work if you have the drivers installed for them.

  Try the latest driver for network card for XP...

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=12454&prodSeriesId=472276&swItem=ob-101092-1&mode=3

  Try this driver package and the bluetooth software...

  http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=5169094&prodSeriesId=5071191&prodNameId=5071193&swEnvOID=1093&swLang=13&mode=2&taskId=135&swItem=ob-92064-1

  Paul

• DVD problem after installing Win XP Service Pack 2

  After installing XP Service pack2 son of college clicked on a question about activation of WinDVD 5 for Toshiba and now my DVD does not load the program. How can I fix it, remimbering I need help step by step?

  WinDVD is the least of your problems: WinXP SP2 should be installed no later than October 10 2006!

  If the computer running Windows XP Gold or SP1 until earlier, may not be a critical functional application of antiviruse protection installed and 3 + years of security updates have not been installed.

  See...

  Help: I got hacked. Now what should I do?
       http://TechNet.Microsoft.com/en-us/library/cc700813.aspx

  Personal data backup (which none should be considered 100% reliable at this point) then format the HARD disk and do a clean install of Windows.  Please note that a repair installation (upgrade AKA on-site) won't fix this!

  HOW to do a clean install of Windows XP: see method 1 and http://michaelstevenstech.com/cleanxpinstall.html#steps in http://support.microsoft.com/kb/978307

  Once installed the clean, you will have the equivalent of a "new computer" in order to take care of everything on the next page before connecting the machine to the internet or one local network (i.e. other computers) otherwise and before using a flash drive or the SD card that is not brand new, or has not been freshly formatted:

  4 steps to help protect your new computer before going online
       http://www.Microsoft.com/security/pypc.aspx

  Other useful references include:

  HOW to get a computer that is running Windows XP Gold (no Service Pack) fully patched (after a clean install)
  http://groups.Google.com/group/Microsoft.public.windowsupdate/MSG/3f5afa8ed33e121c

  HOW TO get a computer that is running Windows XP SP1 (a) or SP2 fully patched (after a clean install)
  http://groups.Google.com/group/Microsoft.public.WindowsXP.General/MSG/a066ae41add7dd2b

  Tip: After getting the computer fully patched, download/install KB971029 manually: http://support.microsoft.com/kb/971029

  NB: No matter what Norton or McAfee free trial which is preinstalled on the computer when you bought will be reinstalled (but invalid) when Windows is reinstalled. You MUST uninstall the trial for free and download/run the removal tool before installing updates, Windows Service Packs or IE upgrades and before installing your new anti-virus application (which will require WinXP SP3 [1] needs to be installed).

  Norton Removal Tool
       FTP://ftp.Symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  McAfee Consumer product removal tool
       http://download.McAfee.com/Products/Licensed/cust_support_patches/MCPR.exe

  See also:

  Measures to help prevent spyware
  http://www.Microsoft.com/security/spyware/prevent.aspx

  Measures to help prevent computer worms
  http://www.Microsoft.com/security/worms/prevent.aspx

  Avoid fake security software!
  http://www.Microsoft.com/security/antivirus/rogue.aspx

  If these procedures look too complex - and there is no shame in admitting this isn't your cup of tea - take the machine to a local, good reputation and stand-alone computer (that is, not BigBoxStoreUSA or Geek Squad) repair facility.

  Good luck!

  ================
  [1] extended for WinXP SP2 support ends July 10, 2010. After this date, the computers running under that WinXP SP2 will NOT be offered for additional updates of critical security, automatic updates do not work, and site Web Windows Update won't be available until SP3 is installed.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Problem with controller network after installing win 7

  Installed win 7 and now I'm missing network controller driver.  Existing driver is Intel Pro Wireless 2200.  Thanks for the help.

  You are the very welcome.

  You will need to manually install the driver then.  The driver should work because I used it on my Intel 2200 Pro on W7.

  Download the zip file instead (first file).  Copy on the laptop with the Intel Pro and unzip it into a folder.

  Go to Device Manager and click on the network controller needing drivers.

  Click on the driver tab, click on set to update driver.  Select her browse my computer for driver software method and navigate to the unzipped driver folder.

  Make sure that the include subfolders is selected and the driver should install this way.

• Tecra A8-ez8512 freezes on the splash screen after installing Win XP

  Hi guys, this is my first post!

  I recently had an opportunity Tecra A8-ez8512 as a gift that had Vista Business installed (and works perfectly!). As a passionate XP user, I quickly decided to format the WHOLE hard drive and then install XP Pro SP2.

  After the format was successful and cleaned the entire hard drive, I put my xp cd in the drive and rebooted the laptop ready to select the boot cd.

  But now it crashes right on the home screen with no small slider under ratings to select a boot device. I pressed on the key board, but nothing happens.

  I noticed little black dots on the white part of the Intel symbol shortly after. What does that mean?

  Can someone please give me some advice?
  Thanks in advance

  Hello

  No idea what the black little dots on the white part of the Intel symbol might be a graphics card problem? ?:| who knows.

  But I m bit confused said you you formatted the HARD drive first, and then you insert the Win XP disk in order to install Win XP
  How you format the HARD drive without the use of the Win XP disc?

  Secondly, it would be interesting to know if you can install the operating system using the Toshiba recovery disc.

• Satellite L350D - 12 M PSLE0E - no sound after installing Win XP

  Hello

  I installed Win XP SP3 on my Tosh laptop.
  I have everything works except the sound.

  We know of a compatible for this model sound card driver in XP.
  I downloaded the bucket full of HD and AC97 Realtek drivers, but none seems not to work.

  I'm really struggling with this one and do not want to go back to Vista.

  Reall any help is appreciated. Robbie.

  Hello

  I had the same problem with sound after installing XP everything seemed fine but no sound!

  I found a solution;
  You need to install the MS patches; KB835221 and KB888111
  These hotfixes must be installed before installing driver sound!

  But I put t know how it works with SP3. I think that you need to remove the SP3 first and then you could install the patches mentioned.

  However, once the patches have been installed, you must follow with the Realtek HD audio driver installation. The latest driver should be placed also on the Realtek page too.

  Well, in my case it worked so it should work on your laptop too!

• Pavilion G4-2029wm (AMD, Win 7 x 64): cannot detect some drivers after installing Win 7 Home Premium

  Dear supporter.

  I try to install Win 7 Home Premium X 64 on HP Pavilion G4-2029wm.

  After the installation is complete, Windows cannot detect some drivers, inclucde: USB (USB universal..), Wifi, LAN,...

  Plz help me solved this problem.

  Thanks & best regards,

  Ongto wrote:

  Dear supporter.

  I try to install Win 7 Home Premium X 64 on HP Pavilion G4-2029wm.

  After the installation is complete, Windows cannot detect some drivers, inclucde: USB (USB universal..), Wifi, LAN,...

  Plz help me solved this problem.

  Thanks & best regards,

  If you installed the Windows operating system without using the HP recovery media, then you will need to download and install all the drivers missing/software separately.

  Here is the link to the download page for your laptop: http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4063&lc=en&cc=us&dlc=en&sw_lang=&product=5273741

• How to restore partition factory settings after installing Win 7 Professional and after having lost everything as a result.

  I have a netbook with a partition that has win7 starter installed.  I unfortunately poorly installed windows 7 Professional and now have nothing available which was originally on the computer.  Everything was wiped clean including my ability to use / access my wireless, ethernet controller, pci, etc..  I tried repeatedly to recover the partition back to factory settings, but it won't give me the option to select the partition.  I guess that's because they are all two Windows 7.  Can you help me get it back to windows 7 edition starter of the partition so I can restore all the factory settings and programs.  I haven't lost any information or files that I loaded win7professtional as soon as I turned it on.  I have restore points, images, etc.

  When I installed Win 7 Professional, not old Info windows.old file but I don't know how to access that is.

  Help, please?  Thank you

  The Windows.old folder has two objectives:
  (1) can be used to uninstall Windows 7 and return your PC to the previous version of Windows.
  (2) contains a backup of all your files of data, documents, photos, Etc. from the previous version of Windows.

  If you don't need either of these two options can delete the Windows.old folder. In your case if you can access the "recovery Partition" to restore the windows and then back the Windows.old folder before you begin.

  Note: Option to change Windows Explorer to see the Windows.old folder:
  Click on start and enter in the box "Search": "hidden" (without the quotes)
  Click on the "Show the hidden files and folders" option at the top of the list.
  In the "Folder Options" window
  Click the 'view' if it is not already selected.
  In the list "Advanced settings" locate "hidden files and folders".
  Now click 'show files and folders '.
  Then, disable the following:
  "Hide empty drives in the computer folder.
  "Hide the extensions of the file types that you want to know."
  "Hide protected operating system files"

  Click on the "Apply" button and the OK"" button.

  How to recover Documents, music, and e-mail after the upgrade with the Windows.old folder
  http://notebooks.com/2010/11/09/how-to-recover-documents-music-and-email-after-upgrading-with-the-Windows-old-folder/

  Where are my files and folders after upgrading from Windows XP or Windows Vista?
  http://Windows.Microsoft.com/en-us/Windows7/where-are-my-files-and-folders-after-upgrading-from-Windows-XP-or-Windows-Vista

  How to restore your personal files after you perform a custom Windows Vista or Windows 7 installation
  http://support.Microsoft.com/kb/932912

  Using Windows.old to retrieve your personal files
  http://adacosta.spaces.live.com/blog/CNS! E8E5CC039D51E3DB! 66249.entry? a = 264056520

  How can I remove the Windows.old folder:
  http://Windows.Microsoft.com/en-us/Windows7/how-do-I-remove-the-Windows-old-folder

  How to uninstall Windows 7:
  http://support.Microsoft.com/default.aspx/KB/971762

  How to restore a Windows 7 computer to a previous Windows installation by using the Windows.old folder: (Note: this article will not work for 64 bit versions of Windows)
  http://support.Microsoft.com/kb/971760

  Uninstall Windows 7 on a multiboot system
  http://Windows.Microsoft.com/en-us/Windows7/uninstall-Windows-7-on-a-multiboot-system

  ======================================================

  How recovery your computer (Windows) using "Recovery Partition" of the Manufacture

  To get there, start your computer and then pressing the appropriate function key. It can be either F1, F2, F9, F10, F11, F12, DEL or tab key. Check the manual for your make and model.

  If your hard drive has failed, you must contact the manufacturer support team and request a "recovery disc" which allows to reinstall Windows 7.

  How access/start the process of recovery of the manufactures listed below.

  Acer: Press and hold ALT + F10, as soon as you see the logo

  ASUS: Press or press the F9 key as soon as you see the Asus logo.

  Dell: Press CTRL + F8 directly after switching on / to start the computer

  EMachines: hold the Alt key and hold press and release the key F10

  Fujitsu: Press F8 several times directly after switching on

  Gateway: http://support.gateway.com/s/software/microsof/vista/7515418/7515418su531.shtml

  HP Notebook: Usually to begin recovery process press the F10 key, power on the computer
  HP Mini: Press F11 directly after switching on / to start the computer

  LG: Press F11 directly after switching on / to start the computer

  Samsung: Press the F4 key to the Samsung logo when you turn on first of all of the computer.

  Sony VAIO: Reboot and press "F8" repeatedly until the screen "Advanced Boot Options".

  Toshiba: press and hold the "0" key before and during feeding sequence.

  Windows 7 - location of the Partition Recovery and information.
  "Configurations of drive partitions using the BIOS has recommended.
  Note: Check the diagrams of this article
  http://TechNet.Microsoft.com/en-us/library/dd744364%28WS.10%29.aspx

  J W Stuart: http://www.pagestart.com

• Satellite L855-14R: games running very slow after installing Win 7

  Hi guys,.

  I have the L855-14R satellite, which came with windows pre-installed 8.

  I used win 8 during a time and games have been works ok.
  So I decided to install a copy of windows 7 ultimate 64-bit.

  I downloaded all the drivers from toshiba support and it seems to work fine until I started the same game I played before.

  He was running very very slow even on low graphics settings.

  No idea of what went wrong after the win 7 installation?

  Have Hmm you installed the driver of ATI graphics card?
  Maybe the game uses the Intel HD internal graphic that is part of the Intel Core i7-3630QM processor?

• Tecra M7 unknown device after installing Win XP

  Hello

  I have a Tecra M7 Tablet PC.

  After installing Windows XP Tablet PC edition and all the drivers for the Toshiba Homepage there are 3 s "unknown device" in Device Manager.

  I installed the Ethernet drivers, but I do not see the adapter to the source 'network '.

  What can I do to fix this?

  MFG pizzaMAN

  Since I n don't know what you mean devices I can't provide you with any information on the necessary drivers

  You're talking about Ethernet driver you are meaning the LAN or WLan?
  Usually the two cards (Wlan & Lan) should appear in devices-> network cards Manager
  If there is an unknown device then it would mean that one of the pilots was not installed.

  On the European driver Toshiba page, you will find two Intel LAN drivers.
  Check both!

  I put t know what your laptop wireless network card is because the Tecra M7 has been equipped with various wireless network cards, but all the drivers (Intel, Atheros) are placed on the page and you should try it!