Ethernet, Wifi will not work on MacbookPro... mystery...

Similar Questions

• wifi will not work, but when connecting via ethertet (sp?) I can get connection. WiFi works on ipad and iphone... but not cell phone?

  Cannot connect to the wifi, but can be downloaded on the iphone and ipad?

  problem with laptop to guess, but don't know what that... everybody has ideas?

  Hello

  1. What is the operating system installed on your computer?

  Please follow the form as follows the link.

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

• Install OSX 10.11.4 I do cleaning but R command will not work. With the help of USB keyboard so not wifi issues to to worry. Help?

  Install OSX 10.11.4 I do cleaning but R command will not work. With the help of USB keyboard so not wifi issues to to worry. Help?

  Would you like to share why you must do a clean install?

  You can try the recovery of the internet (which will work if your older model has been updated to enable of): hold command + Option + R until you see a progress bar (take a while). It will connect you to the Apple servers. When you see the utility window, choose disk utility to erase your disk and when you're done, choose to reinstall OS X.

  Computers that can be upgraded to use OS X Internet Recovery - Apple Support

  PS: Correction: I think not yours can be updated; in this case, you will need the original installation disks to wipe the drive and reinstall.

• Portege M750 Win7 64 bit Wireless Manager (3G) will not work

  I can't TOSHIBA Wireless Manager (3G) to work in a new installation of Win 7 64 bit.

  I did a test installation of Windows 7 64 - bit on and old SATA hard drive and checked TOSHIBA Wireless Manager would work. He did.

  I then did a fresh install of Windows 7 64 - bit on a new Crucial C300 Real SSD 256Go.

  The new facility with the Crucial SSD is not very successful... The operation "stop and restart" does not - the closing not always power off completely and you must push the switch down to.

  Sometimes the SSD does not start - you enter the password of the BIOS but then nothing happens. Sometimes you turn off the power and remove the battery before as the startup disk.

  But the biggest problem is that the (3G) Wireless Manager will not work. The application opens and indicates that "died" - which it is impossible that I use WiFi to post this question.

  I tried to install the software Vodafone 3 G portal. It detects the presence of the 'mobile device' (SIM in housing) but then can not turn it on.

  I downloaded and installed all the latest drivers for the chip, the pilot 3G, 3G software, LAN driver, LAN software and all updates of Windows 7.

  I have the latest version of the BIOS (3.0) but this has not been updated by Toshiba since 11/04/09.

  I would point out that Diagnostic PC Toshiba tool does not recognize the installed 8 GB memory (but ccleaner):

  Model name PORTEGE M750
  Part number PPM75E-00N017EN
  Version of the OS Microsoft Windows 7 Home Premium 6.1.7600
  Version of the BIOS Version 3.00
  Processor Intel (r) Core (TM) 2 Duo CPU P8400 2.26 GHz
  Physical memory 4096 MB RAM
  Disk capacity hard 256,052,899,840 [bytes] 238.468 [GB]
  Network Intel(r) 82567LM Gigabit Network Connection = 10.0.2.2 version = MAC address
  TOSHIBA F3507g Mobile Broadband Network Adapter version 1.3.0.9 = MAC = address
  Version of Intel(r) WiFi Link 5100 AGN = 13.4.0.9 = MAC address
  F3507g Mobile Broadband Modem Modem TOSHIBA version = 5.24.3.0
  Internet Explorer 8.0.7600.16385

  This indicates a BIOS problem?

  -don't

  points to a problem of firmware on the SSD drive (is it sandforce) torque to the incompatibility of BIOS of the SSD.

  I assume that all drivers installed etc were identical on the installation of the trial of HARD drive? so if this is the case it must be the SSD does not not with the BIOS correctly, so the other issues as well

• FN F6 and F7 for less bright and shiny LCD will not work with XP on A305-S6845

  modules common to xp... not on this model...

  added value for xp... not on this model...

  FN F6 and F7 for less bright and shiny LCD will not work with XP on A305-S6845

  C2D t8100, chipset intel, no normal fn keys FN + F5 doesn't seem to operate 'naturally', as do some others that I don't use, but the idea that I spent 8 hours to find all the xp drivers for this thing and can NOT dim my lcd...! ******ed...!!!

  The Toshiba REAL will raise your hand... Please?

  you KNOW millions are without downgrading from vista to xp, GIVE US THE DRIVERS...!

  I had to just to get the rest, scout intel boooted to viata while just to get the wifi, then start on xp, install the wifi, then had to get drivermax (amazing) to find all the drivers

  but no one knows where the FN drivers (no pun intended...)!

  None of the drivers Vista FN will get them to work with XP

  XP drivers for other models will not be installed on this model

  It comes from * ed

  1200 for a machine that cannot dim the lcd...!

  It is unlinke toshiba, how long could possibly take something for xp on to the A305 recompile!

  If someone has an A305 with c2d, get drivermax, they have now all other drivers of my job of paving 99.999% perfect...

  I will also publish on 4shared.com in a massive zip...

  Ok

  Send me a fix...!

  (too late for a refund...!)

  TOSHIBA! everything I own is TOSHIBA... !!! three laptops from toshiba... just give my xp for my A305 drivers...!

  If you come from the United States, I'm afraid, you're on the wrong place. Try to post the same thing on http://community.compuserve.com/n/pfx/forum.aspx?webtag=ws-laptop&redirCnt=1 it's US forum.

  Here are mostly from Europe and Toshiba Europe has nothing to do with Toshiba WE. The company, but may be different marketing strategy and support.
  Maybe you'll find people with the same opinion.

  > 1200 for a machine that cannot dim the lcd...!
  I take you seriously with your opinion, but after reading this, I think that this comment has nothing to do with reality. Recovery of installation image and you'll have the complete functionality for laptop. You have the stick of Windows Vista on your laptop?

• Satellite L670 - after Win 8 upgrade WIFI does not work properly

  Afteer upgrade to Win 8, the WiFi of my Satellite L670-128 has stopped working properly.

  The connection only works some time, usually only a few seconds before the connection is lost.
  After a few seconds or minutes the connection is restored, just soon to be lost again.

  Cannot download large files or even to see larger photos on normal web pages. Is there any Win8 driver for Broadcom coming 802.11n network card, or should I throw one 2.5 year old computer in the trash?

  Buy a usb-wlan card is not an option, as wireless mice is already "permanently" reserving one of the three usb ports and wlan card it would be just to the left...

  To my knowledge this L670 series isn t Win 8 taken in charge and this means that there is no special Win 8 drivers for this device, so I put t think you will find an another Win 8 driver for this WLan card.

  But do you really want to throw this laptop in the trash just because the wifi does not work properly running Win 8?
  The device was working properly under Win 7?

  I would recommend running a few Wlan test.
  For example; Disable wireless encryption on your router and Wifi connectivity with the open network do that just for testing purposes, perhaps you will need to change the type of encryption to test.

• WIFI does not work on my Satellite L650D

  Hi all...

  On my laptop, the wireless light is orange and won t work...
  When I got the laptop connected to the Ethernet cable, it works fine but the minute that I remove it, it turns off.
  Anyone know my problem?

  Thank you

  Hello

  I guess that LAN connection works properly and you can access the internet using LAN.
  But the WiFi does not work even if the WLan light is on. Is this good?

  I m wondering if you have activated the WLan with the FN + F8 keys.
  Have you tried that?

  You have configured the WiFi network properly? I mean that you must make sure that you have chosen the good encryption (WEP, WPA, WPA2, etc.) and the right encryption password!

  You can also disable all the security settings on your router and was able to connect the notebook to open WLan but it must be done only for testing purposes.

• Satellite P500-1CK - WIFI does not work

  Hello

  I bought a Satellite P500-1CK with Windows 7 64 bit. Cause I don't need, I replaced it with Windows 7 32 bit and now my WIFI does not work.

  I tried many drivers, Toshiba drivers and Realtek drivers, old and new versions. Installed and uninstalled them again and again. But it does not work. In the Device Manager, there is no error and no question mark. The map will be displayed as a RTL 8191SE, it's true. I've identified the vendor & device ID also.
  The other FN keys works like a charm, but FN + F8 does not appear. The wireless switch is active and the led is orange.

  When I type "cmd" then "ipconfig/all" it will be only shown the PCI Atheros Gigabit Adapter with the IP address, but not the adapter WLAN of Realtek.

  Searched Google @ and spend hours and hours, but I am at my wits end... Please help me.

  funthomas22

  Hi funthomas22,

  And this doesn t work exactly?

  You see a WLAN in range?
  Have you looked for WLAN networks?
  Can you connect to WIFI networks?

  A point would be interesting: can you try the same thing with preinstalled Windows 7 64 bits instead of your own 32-bit installation?
  Therefore, use the recovery disk Toshiba to restore the version of the OS preinstalled. You will have a pre-tested Toshiba Windows 7 installation where everything should work properly.

  Check this box!

• my wifi is not working, and my troubleshooting does not start on my computer toshiba laptop? and he tells me that my bluetooth must be turned on?

  my laptop WiFi does not work and when I try to trouble shoot the problem he told me that my troubleshooting does not start and also, I get a message telling me that my Bluetooth is turned off?, but this problem all started when I tried to sing on the web and it keep going back to the sign in screen then I cleaned a lot and finally was a less able to get to my office on it but still no wifi and not able to start troubleshooting and still receive a Bluetooth message not on. ????? Help! Please, I beg you!

  Hello

  Thank you for writing to Microsoft Communities.

  Until we start troubleshooting on this issue please provides us with additional information by answering a few questions below, this will help us better solutions to the problems.

  1. What is the brand and model of the computer?

  2. what exactly happens when you try to connect to a WI - FI connection?

  3. you get any error message?

  4. are you able to connect to the Internet by cable?

  5 are. what store you referring?

  6. what operating system is installed on your computer?

  7. the problem occurs in safe mode with networking?

  Please go ahead and follow the steps mentioned and later a update on the State of the question.

  If this is a recent problem, then you can try a system restore to Normal mode or safe mode and see if it helps.

  Note: When you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.

  To run the system restore, you can see the following link.

  How to repair the operating system and how to restore the configuration of the operating system to an earlier point in time in Windows 7:

  For Windows 7: http://windows.microsoft.com/en-US/windows7/System-Restore-frequently-asked-questions

  For Windows Vista: http://windows.microsoft.com/en-US/windows-vista/System-Restore-frequently-asked-questions

  How to restore Windows XP to a previous state: http://support.microsoft.com/kb/306084

  Note: When the computer is in safe mode, System Restore does not restore points. Therefore, you can not undo a restoration you performed when the computer is in safe mode.

  Reference: Wi - Fi and in Windows network connection issues:
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Please follow these recommended steps and post if you still experience the problem.

• After you have uninstalled McAfee, my Wifi does not work (only works LAN connection)

  After you have uninstalled McAfee, my Wifi does not work (only works LAN connection). Troubleshooting message is "windows could automatically bind the ip Protocol to the ip stack.

  New Aspire E11, Windows 8.1

  Help, please.

  Here is how I fixed it:

  Go to control panel > network and Internet > network sharing Center

  Click on "Change adapter settings" in the left pane.

  Right click on your map. Select "Properties".

  There will be a box titled "this connection uses the following items."

  Uncheck anything that looks like it was installed by a third party (AVG, Avast, ZoneAlarm). In my case, the culprit was 'HTC NDIS Protocol Driver", who was installed by the software of my phone (HTC). Because it's not obvious what to uncheck, here is what I currently have checked in my system of work which should not cause a problem:

  KEEP THESE CHECKED:

  Client for Microsoft networks
  QoS Packet Scheduler
  File and Printer Sharing
  IP v6
  Internet Protocol v4
  Driver Link-Layer Topology Discovery map IO
  Link-Layer Topology Discovery recall

  Uncheck everything else.

  Go to network and sharing, disable and re-enable the adapter.

• just has got rid of the virus and responsible for all the disks but given the wifi does not work

  WiFi doesn't work do not

  just has got rid of the virus and responsible for all the disks but given the wifi does not work

  Hello

  Check with the system manufacturer or the actual WiFi device manufacturer and ask in their forums (if any)
  for problems known.

  Actually, try updating your driver:

  Control Panel - network - write down of the brand and the model of the Wifi - double click top - tab of the driver - write
  version - click the driver update (cannot do something that MS is far behind the pilots of certification). Then
  Right click on the Wifi device and UNINSTALL - Reboot - it will refresh the driver stack.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  Download - SAVE - go where you put it - right click – RUN AS ADMIN.

  You can download several at once however restart after the installation of each of them.

  After watching the system manufacturer, you can check the manufacturer of the device an even newer version. (The
  manufacturer of system become your backup policies).

  Repeat for network (NIC) card and is a good time to get the other updated drivers as Vista like
  updated drivers.

  I would also turn off auto update for the drivers. If the updates Windows suggests a just HIDE as they
  are almost always old, and you can search drivers manually as needed.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Hi, I bought a the United States iphone6, im now in South Africa and it will not work. It says sim not supported.how do I fix this?

  Hi, I bought a the United States iphone6, im now in South Africa and it will not work. It says sim not supported.how do I fix this?

  The SIM card is not support indicates that the iPhone is locked to the American carrier that it has been activated with. In order to obtain the released lock it is necessary that you talk to the carrier to find out what their requirements are to release the lock. They are the only ones who unlock it so that it can be used with another carrier.

• My entertainment sainburys application will not work in AirPlay on iOS 9.3

  Entertainment sainburys app will not work in AirPlay I can watch a movie on my iPad, but can't listen to my TV through the air Apple TV device, I can see my iPad on screen and YouTube plays just this app is not working I am using iOS 9.3

  Some applications do not broadcast their content you are sure that your application won't, a lot of apps that provide movies or TV series you block using AirPlay.

• How can I recover my old firefox after I replaced it, it told me a new will not work?

  I was on my AOL Homepage and was encouraged to be upgraded for increased security. Everything went well, but when I tried to open Firefox, I learned it wouldn't work. Usually, with this older system, I am notified when an upgrade will not work. I would have never taken the lead and replaced my old if I knew. Is it possible to recover my old Firefox?

  There are apps that I have on this old system that does not work on newer systems. (I have an Airbook updated but I like the big screen for some things). I found this on Google:
  https://support.Mozilla.org/questions/970943
  Mozilla
  September 11, 2013 - where can I find older versions of Firefox, which runs on OSX 10.5? ... because Firefox 16 is the latest version of Firefox that works with Mac...
  and downloaded Firefox 16 of their link. It seems to work. For security reasons, I use my Airbook for bill payment, etc.
  Thanks for your comments. Thank you very much for the quick responses.

• I have the latest version of FF and the latest version of Roboform... everything has worked perfectly until an hour ago... now the Robofrom toolbar will not work... its

  I have the latest version of FF and the latest version of Roboform... everything has worked perfectly until an hour ago... now the Robofrom toolbar will not work... says not compatible... it is activated in Add ons... nothing has been put to day or changedf suddenly just no toolbar and it will not tie

  RoboForm will probably have an update for Firefox 30 when Firefox 30 is actually out, if not sooner. No need to turn off the automatic updates now.