European connection A30 to US TVs with S-video
Hello
I'm trying to connect my laptop A30 to the US NTSC TV. For the moment, all I get is a black and white picture blurry via the S-Video cable.
I went into the BIOS to see if there is a way I can change the settings from PAL to NTSC, but there is no option for this. I also tried watching the video card settings in Windows, but nothing helped.
Any suggestions as to what I'm doing wrong?
Thanks a lot for your help!
***
Andy
Hello
Have you tried to make some changes on TV? Check please if there is a s - vhs option.
Good bye
Tags: Toshiba
Similar Questions
-
Hello
Soon I'll have a new Mac Book Pro, and I would try Migration Wizard but > > > > when connecting two books of Mac with Migration Wizard should I use a cable Ethernet 'right' or 'twisted '?
You can use either; There is no advantage to one or the other specific.
(144276)
-
I just got a new modem (Arris SB6190) and now my Airport Extreme does not connect. It worked fine with the previous modem (a rented one TWC). Help!
Always recommended to reset the airport back to settings by default and then set up again whenever you have a new modem or change your Internet Service provider.
Turn off the new modem for at least 30 minutes. More is better.
Perform a hard reset on the AirPort Extreme, then it turned off.
Make sure that the Ethernet cable connects the modem to the "O" on the AirPort Extreme WAN port
After the power of the modem 30 minutes down, turn on the modem and let it run for at least 5 minutes by itself.
Then, turn on the airport and let it run a few minutes
Set up AirPort Extreme again
Important note... There are many reports of problems with the modem Arris SB and airports. Both are great products, but they do seem to work perfectly together for some users.
-
I can't connect to my server SMTP with TLS on port (send 465 or 587 / 995 receive) using Thunderbird 31.3 or my OS X 10.10.1 24.6 (Didier) MacBook Pro.
However, I am able to send and receive mail from the same account on my Windows 7 machine using Outlook 2007, using the same settings I configured in Thunderbird. I added the certificate etc.
http://img.Photobucket.com/albums/v631/Napoleon_BlownApart/ScreenShot2014-12-16at121323pm.PNG (Taken when using 24.6)
I am the admin of the server and the password and other settings on the side Server are correct! (I'll take a look at the evolution at the same time. I am already back to an earlier version of Firefox because of sloppy coding and broken features).
Any ideas?
If the server name is a secret, how you expect to receive mail. Please, we have pretty bad without guessing. Seriously what you are done using a self signed certificate, they are free by https://www.startssl.com/
My guess is it of OSX who dislikes the self-signed certificate, how Thunderbird to deal with Windows. As you have a copy install Thunderbird and see if it is a question of OSX.
-
Can bookmarks be portable to multiple computers? Is it an option to connect and use my favorites with multiple computers and locations? Thank you
-
Why has my connection AirPort Extreme recently stopped with my Tablet Android and Windows 7 laptop, but connects very well with all Apple devices?
What exact model of AirPort Extreme do you have? Either have your tablet or laptop Win7 been updated recently? They were both able to connect before and not now OR they were never able to connect? Can the laptop Win7 access Internet when connected by Ethernet? One of these devices have problems connecting to other networks Wi - Fi?
-
Satellite A110-195: black & white photo on TV with s-video connection
When I connect to my laptop to TV with S-video cable, I get black white picture on TV. I tried to solve the problem with little things, but it is still black & white photo on TV. I have tried to change all settings to pal/ntsc under graphics properties, change the S-video cables, install a new graphics driver...
Beside that I have desktop computer with S-video out and it works with the same cables and even TV (it's color).
I noticed that this problem is very often, not just with my laptop with many many others...Can someone tell me what I should try to do?
As far as I know the S-video port on television must be enabled. If you have the same problem with most of the other laptops it's obviously this problem is TV and not PC.
Check the TV settings and make sure that the correct port is enabled.
-
After the update to OS 9.2.1 connection of my mini iPad with a VGA projector no longer works... Any clue? Thank you
Try resetting your device. This will not erase your data stored on that device.
- Press and hold the sleep/wake button
- Press and hold the Home button
- Press and hold both buttons until the display turns off and on again with the Apple logo on the subject.
Alternatively, you can go to settings - general - reset - Reset all settings
If that doesn't work, restore your device to factory settings. Please note that this will delete the data on your device.
Take a look this Apple Support article: use iTunes to restore the iPhone, iPad or iPod to factory settings - Apple Support.
-
How to connect my iPhone via bluetooth with the mcd289 hi-fi sony
Hi all
I feel like this is a stupid question, but I can't for the life of understand me. I have an iPhone running iOS 9.1 5. I just bought a Sony CMT - X5CDB hi-fi Mcd289.
It has built in bluetooth. I followed the instructions to associate my phone and listen to music from him, but he does not ever appears on the phone as a device for me to choose.
Any ideas?
Thank you
Andrew
Hi yuley95,
Sorry to hear that you can't associate your iPhone with your Sony's Hi-Fi speaker. We'll see what can be done to get it paired.
I would first start by taking a look at the troubleshooting below sketch. Start by making sure that your devices are close to each other, restart your iPhone and speaker ensure that your iPhone is updated to bring them to see each other.
First try these steps
- Make sure that your device iOS and Bluetooth Accessory are close together.
- Make sure your Bluetooth accessory is on and fully charged or connected to power. If it uses batteries, test them to see if they need to be replaced.
- Restart your Bluetooth accessory.
- Make sure you have the latest version of iOS on your iPhone, iPad or iPod touch.
- On your iOS device, go to settings > Bluetooth and make sure Bluetooth is on. If you cannot turn on Bluetooth or you see a spinning gear, restart your iPad, iPhone or iPod touch.
- Pairing the Bluetooth accessory, replace the accessory in detection mode, then pair and connectagain.
Let me know if it helps.
Nice day
-
Is it possible to connect my Application ' Stop' button with the "Run" button of LabVIEW?
Problem - one of my clients recently tested my new LabVIEW application and asked how the arrested LabVIEW application can be restarted without clicking on the "Run" (right arrow) button.
Is possible solution - possible to connect my Application ' Stop' button with the "Run" button of LabVIEW?
Thank you!
Barry
The big problem is in your Acquistion to stop audio event. You run the LabVIEW stop sign which is the equivalent of hitting the Cancel button in the toolbar. (See contextual help on that). You can stop the acquisition, but you don't want to stop your LabVIEW program. You need this case in the event your computer to transition state in a sleep mode when you do not make any purchase. Then hit the purchase button to start again transitions the machine state in the acquisition.
In your case of program output, you want really to leave LabVIEW it. You want to run and stop commands like closing the com port and one of these activeX references. Then allow it to stop the while loop. Turn the LabVIEW out outside the loop so that once everything is cleaned, your application may close. You probably want to wrap this command in a case structure so that if you are in the execution environment, it leaves your application. But if you are in the development environment, you don't want to cause your LabVIEW environment stop. Another thing is that right now, you actually have a race condition in the Exit event. The com port will close first or LabVIEW will come out. There is no defined order of execution.
Alternatively, you can have an event to close panel? in this way, you haven't accidentally short circuit all your program by pressing the X key. You want to capture this event, discard it. And if you want to not actually closed, did trigger the Exit Program button so that you can gracefully shutdown.
-
At my place of work, there are a data server with LAN and internet networking. I want to disable the internet connection before it is infected with the virus.
original title: server and virus problemHi SurajMendon,
Your Windows XP question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the platform of networking on TechNet. Please post your question in the TechNet Windows XP Networking forum.
Networking platform
http://social.technet.Microsoft.com/forums/en-us/winserverPN/threads
-
original title: WiFi
I can't connect to the network wirelessly with my Emachines eM350 portable because I get the automatic Wireless Configuration error, see Article 871122.
I use a Huawei E585. I simply want to clamp it alll in the tray.
Remember - this is a public forum so never post private information such as numbers of mail or telephone!
Ideas:
- You have problems with programs
- Error messages
- Recent changes to your computer
- What you have already tried to solve the problem
(1) make sure that u run "NET START WZCSVC" on the command-line as soon as u Ouvrezunesession WINDOWS XP (START, RUN, NET START WZCSVC (command line)).
(2) START, CONNECT, WIRELESS INTERNET CONNECTION
--> under the 'GÉNÉRAL' tab: (1) right click on the wireless Internet connection; (2) click on properties; (3) make sure that all THE ELEMENTS under the title "THIS CONNECTION USES THE FOLLOWING ITEMS" are COMPLETELY FUNCTIONAL, i.e. UNCHECK THE ONES THAT DO ARE NOT ACTIVE ~! (I recently turned off AVG and that this item has been inadvertently clicked on ~!) ;
--> on the 'ADVANCED' tab: run the NETWORK CONFIGURATION WIZARD to reset your network
3) http://support.microsoft.com/kb/871122 --> RUN 'DIFFICULTY CE PROBLEM' (ms - fix 50469)
-
I can't connect to the network wirelessly with my Dell INSPIRON laptop because I get the automatic Wireless Configuration error, see Article 871122
Try this below and see if it help you.
-
I have connection problems with Skype video chat (IE 8 - XP pro.) What should I do to correct this?
Hello
go to skype.com and make sure you have the latest version of their software.
Kind regards.
-
Original title: Network card
The laptop is a series of MSI CX600. I can't get a wireless connection. It comes up with a message saying that the adapter is not connected. The wireless adapter is not displayed next to the ethernet card but appears in the Device Manager and when you click the properties of network adapters listed that they all work normally
Hello
1A adapter ever worked?
2 have you installed the disk supplied with the laptop?
You can check that the installation of the drivers from here:
http://www.msi.com/product/NB/CX600.HTML#/?DIV=driver&OS=Win7%2032
Maybe you are looking for
-
With the latest update of firefox (38.0.5) I take away the new features that I would never use the button 'save for later '. Then the notification popped up in the navigation bar for the new feature 'in player mode', which is another thing that I'll
-
Open a Finder window in the Dock
Obviously something, I forgot how to do, how very boring: temporarily place a folder (aka?) to the right of the dock, I want to click on it and open the folder in a finder window. As of today, instead of opening in a window of type column, the dock i
-
I can't find the multiple number of photos that I have scanned in XP.
Cannot find multiple photos that I have scanned in XP. I can find those I scanned before changing my "Advanced" settings, but cannot locate a folder with them inside now.
-
Hello After upgrading my UCS to the 2.1(3a) version, an error appeared on one of the blades with a code of F1237 the full message is: LED displays error 1/2 server health. Reason: P3V_BAT_SCALED:Voltage threshold crossed. Type: hardware Cause: health
-
Hello everyone, I had to order a laptop for school. But it is still not there, so I had to install windows 7 and office 2010 on my old computer at home to do my school work. When my laptop is here, can I reinstall XP on my old computer and put my cop