Evaluation version for the cisco secure access control server
Hello
I can get the trial version for the cisco secure access control server. IF SO pls send me the link.
Thank you
Hi Thomas,
You can download ACS for windows 4.1 or 4.2 from the link below:
http://www.Cisco.com/cgi-bin/tablebuild.pl/ACS-win-eval
For ACS 5.x, please visit cisco.com
Download software > Security > Cisco Secure Access Control System 5.x > Secure Access Control System Software
HTH
Kind regards
Jousset
Please evaluate the useful messages-
Tags: Cisco Security
Similar Questions
-
Cisco Secure Access Control System vs ISE
Can someone tell me what the difference between these two systems? Is there a function on one that I can't use on the other hand?
GANYMEDE + to start. No Ganymede on ISE in its current form. I'm basically transition all the radius user based auth in ISE and keeping from Ganymede ACS auth admin. ACS no DACL, but only based on user or group membership. ISE's DACL based on very customizable rules and evaluation of posture.
-
Hello team,
Does anyone has a software that can give the ip address for any device connected to the laptop, as the Council of access control?
Thanks for helpLookAtLAN network monitoring is one of these tools.
SuperScan is probably better, but I have not tried.
-
I'm creating an application that uses the authentication of the APEX and characteristics (work) registration and forgot password forms (does not work).
My I forgot the password is public (requires authentication). The user provides the user name and a secret answer, which are validated and then provides the new password. I try to use htmldb_util.reset_pw to reset the password of the user, but it does not work.
I have a process on the new password page call a PL/SQL anonymous block that looks like this (see below), where username = P16_ITEM1 and P18_ITEM1 = new password.
BEGIN
apex_040000.htmldb_util.reset_pw (V ('P16_ITEM1'), V ('P18_ITEM1'));
END;
I don't know how to send a message of success/failure of such PL/SQL block to the APEX, but that's a separate issue, I guess.
In any case, during the trial through SQL Developer as the user with APEX_ADMINISTRATOR_ROLE, I get the following error:
ORA-20001: unauthorized access (package for the undefined security group variable).
ORA-06512: at "APEX_040000.WWV_FLOW_FND_USER_API", line 22
ORA-06512: at "APEX_040000.WWV_FLOW_FND_USER_API", line 1220
ORA-06512: at "APEX_040000.HTMLDB_UTIL", line 1253
ORA-06512: at line 8 level
I've searched previous discussions and tried different suggestions with no luck.
I'm on Oracle DB 11g XE and APEX 4.x.
Any help will be appreciated. Thank you
Alex.In any case, during the trial through SQL Developer as the user with APEX_ADMINISTRATOR_ROLE, I get the following error:
ORA-20001: unauthorized access (package for the undefined security group variable).
When executing code outside the Apex which depends on the security defined Apex group, perform the following steps before your own code:
wwv_flow_api.set_security_group_id(apex_util.find_security_group_id('YOUR_SCHEMA_NAME'));
Google "wwv_flow_api.set_security_group_id" for more details, like this blog:
http://www.easyapex.com/index.php?p=502
-Morten
http://ORA-00001.blogspot.com
-
Record of equipment for the Cisco AnyConnect client NAM module
Hi all
Forgive me if this has been asked before or on the Cisco site somewhere (I could just find)
Are there hardware specifications for the Cisco Anyconnect Network Access Manager module?
Where can I find what wifi chipset is compatible with?
Thanks in advance for your answer.
Compatibility with the NAM module is based on the chipset not guest OS. The current operating system compatibility is listed here.
-
Using transform (MST) and group policy to install the Cisco Secure mobility Client
I created a modification transformation .mst file to install the Cisco Secure mobility Client. I installed the client by using Group Policy. When I rebooted my computer that customer installs and restarts. Is there a property that I can add to the transformation so that the restart will not be required?
If I do the installation using the MSIEXEC command, I can use the /norestart variable.
Thank you
Alex
Alex,
For some reason, the screenshot not attached to my previous post.
It must be visible on the 'Table' tab, then 'Property' field in your MSI Editor tool.
HTH!
Kind regards
Nick
-
How to change keyboard for windows 8 (UK version) for the American version
Hello I am sorry to say that I downloaded the wrong version of Windows 8, which was the UK version. I have not noticed any difference on my English version of the original U.S. version except when I use the keyboard. Many common symbols is switched, which is terribly annoying as a programmer. Instead of resettlement and the backup of my files, is possible to just manually change my keyboard version for the presentation of the US version?
First attempt:
Control Panel > hardware and peripherals > USB keyboard
-Once in the properties of the kerboard I can't find a way to change the layout.
Second attempt:
Device Manager > kerboard
-Which lead me to the same window that depends on the installed keyboard driver
From the desktop, it is much easier.
- Control Panel, search language
- Choose change input methods
- Click Add an input method and the United States to choose a (I already had)
- Set as the default method or just delete entirely the United Kingdom.
-
HP Stream 13.3: master password for the software security device
I recently bought my HP laptop and I thought it would bw a good idea to use the password and I created and do not remember for the life of me what it is. Using google and see what I could do. He told me that I could restore the computer to factory settings and keep my files and clear the password. I tried and when I logged on today he again asked me the password into a box that says: Please enter the master password for the software security device. I tried all how can I get rid of this or reset it so that I can pick one and write it down. It won't let me connect on the Web site of my school because even if I click cancel it tell me that I can get because it cannot determine my credentials. Yes, even though I entered in my password for my school site which is not serious because I do not know the master password! Please help as soon as you can!
PiTT
E-mail: [email protected]
See the document of support here:
https://support.Mozilla.org/en-us/KB/reset-your-master-password-if-you-forgot-it
-
after update to XP media center units Vista remote control
Just upgraded to Vista Home Premium to XP. Got a Packard Bell with RF for the Media Center remote control, worked fine with XP, but is no longer compatible with Vista. I checked the usb driver for the usb XF-10 rf remote receiver and it is fine, uninstalled and reinstalled it. Handset was working fine a few days ago. I also went in 'Administrator', 'services' and then active HID, but it still does not work. Media works well, but it would be nice to have the operation of the remote control! Not particularly computer, simply suggestions please! Thank you, Nick.Hi Nicolas,
I suggest you to check the battery. Additionally, make sure that you have installed the right drivers for you Consumer IR Port.
For more information, you can check the link below,
-
How to create a VPN file .pcf for the CISCO VPN CLIENT software profile
Dear all
How to create a VPN file .pcf for the CISCO VPN CLIENT software profile
Concerning
Hi Imran,
Can't do much about that because it depends on what authenticate you the VPN server and how the settings. But let me introduce you to the memory layout. Once you install and open a VPN client. Press it again and it opens up a new page for the VPN config.
Example of configuration as it is attached. But it differs depending on the configuration of your vpn server.
Once you create and save this profile. Your FCP file is stored.
Please assess whether the information provided is useful.
By
Knockaert
-
On the Cisco secure desktop PC emulator
We have an ASA 5550. We need to install the software host explore on each computer so that users can make payroll on the mainframe. It is possible to install this software on the Cisco Secure Desktop uses SSL client so that it is unnecessary to install Explorer host on each computer?
Thank you.
Diane
No, you can not use CSD to install the software you want to install. CSD provides a virtual office to provide the secure environment when you connect via VPN/SSL. CSD is not like citrix or RDP unfortunately.
-
I have a Mac with LR 6.5.1 installet.
Tonight I downloaded the trial version for the LR CC photographer. But whenever I try to start the program it start LR 6.5.1 and not the CC version.
I was told that I could have the two program installed on my computer
JEG h fået lagt problemet. Det er ikke possible in LR CC test nar jeg har en LR 6.5.1 installeret. :-)
-
page every time I try to download a free trial version for the sequels, I get to the legacy that when I click on free trial he always says we know the atm problem but its nothing to with the wifi is good, but its unique every time Please HELP
You MUST have a 64-bit computer and operating system... What is your computer?
-Programs are supposed TO not view or download if they are not installed on your computer
MINIMUM for After Effects and Premiere Pro http://helpx.adobe.com/premiere-pro/system-requirements.html
-
Not able to see the published task and not able to reset the version for the task
Hello
Created a task, validated, by selecting the task button you click on publish in the tools to publish the task.
Customer application (Callcenter) sailed Administration - Business Process - > deployment task
Here, unable to see the task added to activate.
I tried twice to copy folder but not able to see.
I am not able to reset the version for the created task.
Could you please let me know how to overcome these.
Using the database of the siebel8.0.0.5 example
Thank youNO, you don't have to copy the srf tools file to the location of the customer.
just when compiling your project or changes you must click on the Browse button and navigate to the customer i.e. srf "/ web client/objects/enu/siebel.srf".
but before, also compile all projects to the strategic outcomes of the client.
the other thing you should check is client and tools should point to the same database that you should check the cfg files of the two respectively in [[example]] section connectstring = "\sample\utf-8\sse_samp.dbf."
no doubt, maybe that's the problem.
Neeraj Varma
-
Access control server - CASE
Hi people,
I have my doubts on the access control server and NAC - clean access server.
The CASE of the NAC can do the job of the ACS?
In my scenario, it acts as VMPS server, AAA server, or RADIUS server.
Can someone help me?
Thank you!
Hi friend
ACS is entirely different than the clean access server. See the below url for more details.
http://www.Cisco.com/en/us/products/ps6128/products_qanda_item0900aecd803be813.shtml
If it helps, please note or answering another question.
Kind regards
Rafael Lanna
Maybe you are looking for
-
Trouble with iPad Pro keyboard Smart 9.7
After iOS10.0 my keyboard caps lock Smart button does not work correctly. It changes languages instead of the caps lock.
-
PID position control: guide me
Dear Member I want to build a position of PID control I read the DC position by potentiometer with 360 degrees-128 to 127 [complete] If the pid entry is range of voltage between-128 to 127 the entrance of motor continuous is PWM and the direction of
-
My email account has been hacked and now my e-mail address is sent to someone I don't know.
To restore my password and explaining that I was not in Spain, nor having a sick sister to parents and friends, I see that my email was fwd to * address email is removed from the privacy *. I don't know how it happened or that person. What should be
-
Flickering screen liquid Duo E2
Hi I got this phone for Christmas, from the iphone 4 and well except for the screen. When you use the phone at the bottom of the screen has a section that particularly flickers when scrolling is this normal or is there a problem?Thanks a lot for any
-
I tried to implement an Ooma phone system in my network and now it no longer works properly. I removed the Ooma of configuration and it still does not work. Here is the configuration: Wall---> Linksys Cable Modem---> Router Linksys WRT54G I narrowed