even another area office

Similar Questions

• Can a site the browser to examine all the links (relative to the root) as belonging to another area?

  One of my sites gets its images on another server (and domain). Therefore, instead of paths relative to the root, I use full http:// URL.

  Is not a big deal, except that the area where these images are stored too, sometimes changes. I have to find/replace all http:// on the right, so they point to the new domain.

  I just thought that a cleaner solution (which can - hopefully - already exist) might be to insert a single line at the top of the HTML file indicating the browser to view all the links related to the root as belonging to another area.

  Something like:

  < meta domain = "alternatesite.com" / > "

  "< img src="/images/image.jpg "/ >

  Where only one line should be changed, and the code would read as it is located on alternatesite.com, even if it is com.

  It is already doable and if so, what is the right syntax?

  Thank you!

  You have skills with the script server? It would certainly be a way to do.

• Display in a field as a decimal number in another area

  I made a form that I use to print on my preprinted check, what I have to do is fill in the form on the side heel check and all the driver get written, I even found a javascript that change the amount of revenue to the amount written word.

  I have only one left only small problem but I'm not very familiar with these scripts; On the ground, I type my check amount, I would automatically get the hundred part and put it in another area. I want to use to fill the field to the right of the written form amount on a typical check.

  so in short, I have a field named 'CHK1_AMOUNT' and its value is, say, " 1297.75 " and I would like a script to automatically write " 75 " in a field named "CHK1_CENTS".

  I'm sure it's as easy as 1-2-3, but I can't seem to find an easy way 1

  Thanks for your help

  Here is a way. It is intended to be the custom for the field CHK1_CENTS calculation script:

  Custom calculation script

  (function () {}

  Get the value of entry, rounded to the nearest hundred (for example, 24.9999-> 25.00)

  var v1 = + util.printf ("%.2f", getField("CHK1_AMOUNT").value);

  Determine the hundred

  var s1 = util.printf ("%.0f", 100 * (Math.abs (v1% 1)));

  Add a zero not significant, as appropriate

  If (s1.length = 1) s1 = '0' + s1;

  Set this field value

  Event.Value = s1;

  })();

  This text field should not be in a digital format. Just it set to None.

• Day of EA I need to reconnect my gateway &amp; LAN when good even they are connected. Why?

  Since updating to 10.0.2 I need to reconnect my router & modem when good even they are already connected. If I try to access the line he tells me that it cannot find the server. I've set up with this several days & am tired of rebooting each and every day... which gives & how do I fix?

  Hello

  I'm not sure that you understand the problem. The connection is down to chance? It happens only in the morning when you open the lid? You would update anything else in time (especially a Windows Update)?

  Ian.

• No wireless networks detected even they are available and wifi is turned on

  Hi all

  I can't see the wireless networks available even they are available, and always I see red x mark on wirelss icon beside the clock.

  laptop: HP ProBook s 4540

  OS: windows 7 Ultimate

  WiFi adapter: Ralink RT3290 802.11bgn Wi - Fi adapter

  I installed the latest update by connecting computer laptop eithernet cable and search launch legacy manager, alwas says:

  "the best driver for your device software is up-to-date.

  Please any idea of help.

  Thanks in advance.

  Thank you very much for your quick response, actually this problem is solved by changing the country / region of the Device Manager wifi adapter, I tried more region until I had access to available networks.
  
  Thanks again

• Why my cursor jump to another area of the page if I stop while typing?

  Using windows xp pro, IE 8, while typing, if I pause or stop thinking, sometimes my cursor will move to another area on the page.  If I go back to typing, letters will start to appear when the cursor is, it is very random and only moves to the area on the page where I already typed, sometimes in the middle of a Word.

  Thank you annie...

  Hi AnnieSaub,

  1. did you of recent changes on the computer?

  2. the problem only happens when you use internet explorer 8?

  3. you use USB keyboard or computer laptop touchpad?

  4 when was the last time it was working fine?

  If the problem only occurs when you use Internet explorer 8 then try the steps below.

  Method 1

  Check if Add-ons installed on the Internet explore is the origin of the problem. I suggest that you try to open Internet explorer without modules and check if the problem persists.

  (a) click the Start button, click all programs, and click Accessories

  (b) click System Tools, click Internet Explorer (No Add-ons).

  How the modules of the browser affect my computer?

  http://Windows.Microsoft.com/en-us/Windows-Vista/how-do-browser-add-ons-affect-my-computer

  Note: Above article is also applicable to the Windows XP operating systems.

  Method 2

  If the previous step fails then try to reset the internet settings explore by default and check.

  For more information please visit the link below.

  How to reset Internet Explorer settings

  http://support.Microsoft.com/kb/923737

  Important: Reset Internet explore its default configuration. This step will disable also any add-ons, plug-ins or toolbars that are installed. Although this solution is fast, it also means that, if you want to use one of these modules in the future, they must be reinstalled.

• Auto create the value of a given field based on the range of percentage in another area

  Hello, people forum!  I am trying to create a field that fills a score based on the percentage in another area.  To this end, I have a field that autocalculates a percentage based on two other fields.  I would be close to a third field which, for example, the rate less 75% 2... 75 - 85% 3... and more than 85% 4.  I can't understand the syntax to make it happen, can anyone of you help?

  For the edification, my percentage field looks like:

  Calculation of the percentage of rock - use the number Format "percentage".

  If (this.getField("RockTotalQ").value == 0) {}
  Event.Value = 0;
  } else {}
  Event.Value = this.getField("RockComplQ").value/this.getField ("RockTotalQ") .value;
  }

  Thank you.

  You can use something like this than the calculation script custom in the other field (make sure that it appears after the 'Percentage of Rock' field in the calculation order, if!):

  var v = this.getField("Rock Percentage").valueAsString;
  if (v=="") event.value = "";
  else {
      v = Number(v);
      if (v<=0.75) event.value = 2;
      else if (v<=0.85) event.value = 3;
      else event.value = 4;
  }
  

• Using getDate in input field and display of the daysLeftUntil in another area...

  I try to use JS in an adobe form I created. I have a date field in which the user enters the current date. Then, in another area, the days remaining until the end of the year are displayed. I can do that great in HTML, but in Acrobat is not quite the same thing.

  This is what I have so far, but applying it is difficult.

  function DayDiff(StartDate)
  {
      var TYear=StartDate.getFullYear();
          var TDay=new Date("January, 01, 2014");
          TDay.getFullYear(TYear);
          var DayCount=(TDay-StartDate)/(1000*60*60*24);
          DayCount=Math.round(DayCount); 
      return(DayCount);
  }
  

  Yes, probably... Change this:

  diffDays = diffMs var / oneDay.

  TO:

  var diffDays = Math.floor(diffMs / oneDay);

• How can I get Tracker to find a shared review, THAT PDF initiated in another area?

  I initiated a shared for a PDF review and stored on a network server in the domain X. Subseqauently, the server has been moved to another area, call it Y.

  Now, Tracker of Acrobat cannot find the PDF file... and reviewers can no longer access the PDF.

  How can I me Tracker to find the PDF file in the new domain Y?

  No, this is not possible. You must run the test again. This is because the review server information are embedded in the PDF file and when you change the server of the review, the JavaScript embedded in PDF format is still referring to the old server. Tracker is so impossible to locate the PDF review.

  If the old review the comments of the other reviewers, you can save it as an archive and start the review on the new server on this new PDF. This way all the review comments may be stored in the PDF file, but they will be published "on behalf of" the initiator now.

  Hope that helps.

• The passage of the text to another area?

  Is there a way to pass one text to another area without having to close the active text box?  In other words, at present, I work in an area of text, but before I can edit another area of text, I close/leave the premiera, reselect the text tool, then click on the next box I want to change.  Is it possible to simply jump from one region to?

  Hello!

  Press the Enter key on the numeric keypad (or command + return on the keyboard) to commit the current text block, then simply click inside the other text box for editing. (There is not need to reselect the text tool).

  To create another block of text or area while you are working in one, shift + click somewhere else on your document.

  I hope this helps!

• Reference Variables declared in another area?

  Sorry if this is common knowledge, but how do I reference the value of a variable created in a field in another area?

  For example the "sub-total" field contains a variable called rSubTotal

  A function inside another ('total') field wants to call the current value of rSubTotal.

  How can I achieve this in LiveCycle Designer?

  Thank you and have a day of wonderfuld,.

  Brandon Boswell

  You can mount it as Int/float using parseInt or parseFloat when using it. Unfortunately these vars are only strings.

  Paul

• When I connect to another computer, office, I can't access my favorites. Only available bookmarks are the other owners of computers.

  If Mozilla is server-based, why are my bookmarks/favorites not available when I connect to my account? Thanks for any help!

  This must be provided. Firefox is not based on server it is installed on your device.

  It is possible to synchronize the devices using Firefox Sync, but it is not appropriate if you use someone elses computer.

  You might consider taking a copy of your bookmarks with you or placing them available somewhere on the web (or on a medium such as a memory stick).

  • Use bookmarks HTML
    • Export your bookmarks as HTML. Open this file with Firefox. Try it first on your local computer.
    • See Export Firefox bookmarks to an HTML file for backup or transfer bookmarks
    • Noticing no need to import the file it will be readable in Firefox. It is not not searchable from the address bar or bookmarks manager, but it should be a useful list of usable and searchable.
  • Use a Firefox profile on the other computer.
    If you have Firefox installed and the permission of the owner of the other computer (it can be your own additional machine), you will be able to synchronize or migrate the profile details, including bookmarks. Or just restore a set of bookmarks from the other machine.
    • See How can I set up Sync on my computer?
      Profiles - where Firefox stores your bookmarks, passwords and other user data
      Backup and restore Firefox profiles information
      Restore bookmarks from a backup or move them to another computer

• Are Office 2010 Cumulative installed automatically updated from Windows Update?

  I have Office 2010 Pro Plus installed on several machines, if they are installed through Windows Update hoe can you check the cumulative updates have been applied.

  OK, gotcha now. [From a technical point of view, Office updates are only available via automatic updates if Microsoft Update (vs Windows Update) is the source of the default update.]

  Other cumulative updates for Office 2010:

  http://support.Microsoft.com/kb/2493730

  http://support.Microsoft.com/kb/2479673

  http://support.Microsoft.com/kb/2449183

  http://support.Microsoft.com/kb/2396341

  More:

  Office 2010 Service Pack 1 is almost here
  ["The data below is a cumulative list patches 2010 which already have been shipped. These will be included in our version of SP1. It is a cumulative combination of updates and public updates. In addition to what is stated below, SP1 will contain more bugs in each product... »]
  http://blogs.technet.com/b/office_sustained_engineering/archive/2011/04/05/Office-2010-Service-Pack-1-is-almost-here.aspx

  PS: You can subscribe to this RSS feed.

• KB975051 updates and KB976882 will not install on Windows Vista. They are Office and Outlook 2003. Anyone else having the same problem?

  Tried several times.  Windows Update keeps prompting me to install but it fails every time.

  I was finally able to solve the problem of not being able to update KB975051 and KB976882 by taking the following measures:
  In Google I typed in 'the kb976882 will not be installed.  Under options, I got "Download Details: update for Microsoft Office Outlook 2003 Junk...» "the site of Microsoft.com/downloads.  I downloaded from this site and then also picked KB975051 on other popular choice located lower on the page and done the same thing.  I don't remember this solution being a few days ago.
  I hope you find that this approach works for you as well.  Ignore the entrance of miss under my name as proposed in another comment response.  I have missunderstood as a way to comment on...
  Craig

• Access to folders and files on your computer using the UNC path in another area

  We have two different fields in our society (let's say the domain A and domain B)

  and are under the same subnet. Since some colleagues need to access the files in both sides,

  What we had planned is to their PC to join A domain and create a user account in domain B.

  When they need to access domain B to domain A PC files, they simply type in the unc path and

  Enter the credentials of their domain user account B.

  Now the situation is, when the user types in their identification of the B domain user account information, it always displays in Windows security:

  Connection failure: unknown username or bad password

  I wonder - is this due to the feature win CredSSP 7, as the CredSSP will affect Remote Desktop

  that cause similar unless problem shut down us by editing the default.rdp.

  Anyone know CredSSP is the cause of this problem? Or is it caused by another issue & no work around for it?

  Hello Frederik,

  I have already made to precede the user name with the domain name but always this error.

  Why I think that it is related to CredSSP is because I got the same error when I use

  remote control for PC B of the domain A PC. While the issue of distance is resolved by changing

  default.RDP with notepad, adding, [enablecredsspsupport:i:0] at the end.

  So, I wonder the problem of file also caused by CredSSP.