Event ID 1000: Faulting application name: svchost.exe_SysMain

Similar Questions

• Event ID: 1000 Faulting application devenv.exe, version 8.0.50727.762, stamp 45716759, failed module gdiplus.dll, version 5.2.6001.22319, time stamp 4a841b37, debug? 0, address of failure 0x0001bf5e

  My repeateedly of crash of visual studio 2005 in 10-20 minutes

  with the following error

  Event ID: 1000

  Failing application devenv.exe, version 8.0.50727.762, time stamp 45716759, failed module gdiplus.dll, version 5.2.6001.22319, time stamp 4a841b37, debug? 0, address failure 0x0001bf5e.

  Event ID: 1023

  .NET runtime version 2.0.50727.3615 - engine error fatal execution (7A2E1122) (0)

  Hi ashnov,

  1. did you of recent changes on the computer?

  2 when was the last time it was working fine?

  Method 1

  I suggest that you install the updated drivers for the graphics card on the computer by visiting the card manufacturer or the manufacturer of the computer Web site to download and install the drivers, check if it helps.

  How to manage devices in Windows XP

  http://support.Microsoft.com/kb/283658

  Method 2

  If the previous step fails, then I suggest that you do the system restore and check if it works.

  How to restore Windows XP to a previous state

  http://support.Microsoft.com/kb/306084

  Method 3

  I suggest that scan you SFC on the computer that would be a system file corrupt on the computer search and replace.

  The analysis may take some time, so be patient. Windows allows to fix corrupt or missing files it finds. If the information of the installation CD is required to fix the problem, you may be asked to insert your Windows XP installation CD.

  Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)

  http://support.Microsoft.com/kb/310747

  Method 4

  If the steps above fail, then reinstall the program and check if that helps.

• Event ID: 1000 - Faulting application vstudio.exe, version 13.0.0.0, failed module msvfw32.dll, version 5.1.2600.5512, fault 0x0000a81a address.

  Failing application vstudio.exe, version 13.0.0.0, failed module msvfw32.dll, version 5.1.2600.5512, address failure 0x0000a81a. After execution of the application for a day or two, the application closes.  The event log has been as above.  I ran "sfc/scannow" but he has no apparent effect.  Nothing in the log of events to indicate any repaired or replaced file.  How do I know if msvfw32.dll is bad, and if it is, how do I replace it.   If this is not bad, what else could be the cause?

  You run Microsoft® Windows® Update?  There are a couple of security updates for Visual Studio, DirectShow and Quartz which involve the msvfw32.dll and vstudio.exe.  Try and let the forum know if this helped.

• Event 1000, Application error (the default application name: w3wp.exe - name of the failed module: KERNELBASE.dll)

  Hello guys,.

  During the execution of a web app to make me as a mistake: remote server does not. Here are the details of the spectators of the event who were captured at the same time where this error occurred:
  Event 1000, Application error
  The failing application name: w3wp.exe, version: 7.5.7600.16385, time stamp: 0x4a5bd0eb

  Name of the failed module: KERNELBASE.dll, version: 6.1.7600.16850, time stamp: 0x4e211da1

  Exception code: 0xe053534f

  Offset: 0x000000000000a88d

  ID of the process failed: 0 x %9

  Start time of application vulnerabilities: 0 x % 10

  The failing application path: %11

  Path of the failing module: 12%

  Report ID: 13%
  Event 1001, Windows Error Reporting
  Bucket of error, type 0

  Event name: APPCRASH

  Answer: No available

  Cabin ID: 0

  Signature of the problem:

  P1: w3wp.exe

  P2: 7.5.7600.16385

  P3: 4a5bd0eb

  P4: KERNELBASE.dll

  P5: 6.1.7600.16850

  P6: 4e211da1

  P7: e053534f

  P8: 000000000000a88d

  P9:

  P10:

  Attached files:

  C:\Windows\Temp\WERC9CD.tmp.WERInternalMetadata.XML

  C:\Windows\Temp\WERC9CE.tmp.HDMP

  C:\Windows\Temp\WEREE30.tmp.mdmp

  These files are available here:

  C:\ProgramData\Microsoft\Windows\WER\ReportQueue\AppCrash_w3wp.exe_30877924d6b2c607fe88a8718915f25fb79093_cab_e905f2b0

  Symbol of the analysis:

  Recheck for solution: 0

  Report ID: d46a6849-8f6a-11e1-98af-00215e6e4855

  Display state: 4
  It is a priority issue we are facing in IIS. IIS is configured for the 2.0 Framework and underlying operating system is Windows Server 2008 R2 Standard. Please suggest how to solve. Any input related question above is significant.

  Hello

  In dealing with the problem with Windows Server 2008, it would be preferable to send the same in the Technet community for more help.

  http://social.technet.Microsoft.com/forums/en/category/WindowsServer/

• I can't open firefox. Here are the details of the problem. Problem event name: APPCRASH application name: firefox.exe Application Version: 23.0.1.4974 app

  Problem event name: APPCRASH

   Application Name:	firefox.exe
   Application Version:	23.0.1.4974
   Application Timestamp:	520bc252
   Fault Module Name:	ntdll.dll
   Fault Module Version:	6.0.6002.18881
   Fault Module Timestamp:	51da3e27
   Exception Code:	c0000005
   Exception Offset:	00066448
   OS Version:	6.0.6002.2.2.0.768.3
   Locale ID:	2057
   Additional Information 1:	bfef
   Additional Information 2:	e8adce1c2b9e7be834b4063ac3c53863
   Additional Information 3:	bfef
   Additional Information 4:	e8adce1c2b9e7be834b4063ac3c53863
  

  Read our privacy statement:

   http://go.microsoft.com/fwlink/?linkid=50163&clcid=0x0409
  

  See if you can locate the program that belongs to the bitguard dll and uninstall this program.

  • http://windowfdb.com/q.php?q=BitGuard-dll-c-ProgramData-BitGuard-2-6-1673-238-c16c1ccb-7046-4E5C-CT
  • https://crash-stats.Mozilla.com/report/index/5f71232c-2ba3-4053-AB4D-5c8932130915

  This could also be a problem with the report of Trusteer

  • http://www.Trusteer.com/support/rapport-installation-links
  • http://www.Trusteer.com/support/en/report-problem
  • http://KB.mozillazine.org/Firefox_crashes#Trusteer_Rapport

  Try to update or uninstall and reinstall Trusteer report and if that does not help then disable/stop the program for now.

  • Start menu > programs > Trusteer report > stop report

• Failed application Surescripts_borero.exe, Source: Application error event ID: 1000, the task category: 100

  Need solution for Application error.
  Error details:
  Log name: Application
  Source: Application error
  Event ID: 1000
  Level: error
  User: n/a
  Connected: 10/01/2012 01:42:21
  Task category: (100)
  Keywords: Classic
  Computer: Suitemed_DB2

  Details:
  Failed application Surescripts_Borero.exe, Version 14.0.0.0, time stamp 0x4bce57d1, failed module pbdwe1154.dll, version 11.5.1.4740, time stamp 0x4bce57fe, exception 0xc0000005 code,

  I faced this error more than 200 times a day. Necessary solution.

  Thank you
  Manon.

  Hello

  Your question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the Windows Server forum.

  Please find the link below,
  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

  Hope this information is useful.

• Problem event name: APPCRASH application name: explorer.exe app Version: 6.0.6002.18005

  Please could someone help? I copied stuff from a friend on an external hard drive of mine. It is possible to go on the drive when it is connected and other records, but as soon as I try to go in this specific folder Windows Explorer crashes. My anti-virus software, Avast is up-to-date and I scanned this file, but it captures not all viruses.

  Problem event name: APPCRASH
  Application name: explorer.exe
  Application version: 6.0.6002.18005
  Application timestamp: 49e01da5
  Fault Module name: ffdshow.ax
  Fault Module Version: 1.1.3800.0
  Timestamp of Module error: 4d911aca
  Exception code: c0000005
  Exception offset: 0019d26b
  OS version: 6.0.6002.2.2.0.256.6
  Locale ID: 7177
  Additional information 1: fd00
  More information 2: ea6f5fe8924aaa756324d57f87834160
  Additional information 3: fd00
  Additional information 4: ea6f5fe8924aaa756324d57f87834160

  Read our privacy statement:
  http://go.Microsoft.com/fwlink/?LinkId=50163&clcid=0x0409

  Fault Module name: ffdshow.ax

  Download the latest ffdshow codec

• Whenever I connect to internet I get this message within seconds, Internet Explorer has stopped working the check online for a solution of the problem event name: the BEX Application name: IEXPLORE. EXE

  ExploInternet Internet exporer has stopped working

   

  Windows can check online for a solutiom to the problem

   

  -> OnlinCheck check online for a solution and close the program

   

  -> Close the don't

   

  PROBLEM ISEVIDENT

  Signature of the problem:

  Problem event name: BEX

  Application name: IEXPLORE. EXE

  Application version: 11.0.9600.18231

  Application timestamp: 56b8edd6

  Fault Module name: StackHash_d7b8

  Fault Module Version: 0.0.0.0

  Fault Module Timestamp: 00000000

  Exception offset: 1002ab36

  Exception code: c0000417

  Exception data: 00000000

  OS version: 6.1.7601.2.1.0.768.3

  Locale ID: 3081

  Additional information 1: d7b8

  More information 2: d7b83704f6db94e0c4619825a3362866

  3 more information: 6b 15

  Additional information 4: 6b153378e67b448e43ca3c57dc8920c9

  Then, I lose the page and have courses all over again.

  Can someone please help. It started only happening more than a week.

  Hello

  Thank you for your response. Check this link and follow the post SpiritX for troubleshooting steps.

  Please let us know how it goes for help us to you more.

• Canon MP Navigator EX has stopped working; Problem event name: APPCRASH Application name: mpnex40.exe

  Original title: Canon MP Navigator EX has stopped working

  I use Win 7 64 bit. I spent an hour with Canon. I followed their directions without success.  I did everything suggested on the internet without success.   I uninstalled and reinstalled. I tried to fix the corrupted user file. The scanner send scans to the computer for work. The person Canon thought it might be a corrupt and says something about a twain file function registry file. Here are the details of the problem:

  Description: Has stopped working the problem signature: problem event name: APPCRASH application name: mpnex40.exe Application Version: 4.0.2.0 Application timestamp: 4df9a6aa fault Module name: ole32.dll Version Module fault: 6.1.7601.17514 fault Module Timestamp: 4ce7b96f Code of Exception: c0000005 Exception Offset: 0004afb2 OS Version: 6.1.7601.2.1.0.768.3 locale ID: 1033

  Thanks for any help.

  Hello

  1. have you tried to create a new user profile?

  2. what happens when you work with Canon MP Navigator EX?

  3. do you get an error message? If Yes, what is the full error message?

  4. What are the troubleshooting steps you have tried to solve the problem?

  5. have you done any software or hardware changes on your computer before this problem?

  Try the following steps.

  Method 1:

  Run the fixit from following link.

  http://support.Microsoft.com/mats/hardware_device_problems/en-us

  Method 2:

  Scan of the SFC

  Refer to this article for more information on how to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7.

  http://support.Microsoft.com/kb/929833
  Display the results.

  Hope the information is useful.

• Freezing of Windows Explorer (problem event name: AppHangB1 application name: Explorer.EXE)

  my laptop freeze everytime I try to copy files from one disk to another, and here is the problem report

  Problem event name: AppHangB1

  Application name: Explorer.EXE

  Application version: 6.0.6002.18005

  Application timestamp: 49e01da5

  Hang Signature: e36f

  Hang the Type: 4

  The system version: 6.0.6002.2.2.0.768.3

  Locale ID: 2057

  Signing of additional blocking 1: 84a74b2e2362b73156ffd8ce815ab7de

  Signature of blocking additional 2:0433

  Signing of additional blocking 3: 7ac408085f85bc7b4993b6de39385374

  Signing of additional blocking 4: ef2c

  Signing of additional blocking 5: 7192d5cf15e616a12e2e559236f7057d

  Signing of additional blocking 6: a5d3

  Signing of additional blocking 7: 9338adb319feac4f0ba33134abc2bfbc

   

  Original title: problem event name: AppHangB1 application name: Explorer.EXE

  Hello

  1 did you change on your computer before this problem?

  2. this problem occur when copying all the files?

  3. you try to copy files to an external drive?

  You can check if the problem exists in a clean boot state.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After a troubleshooting follow step 7: reset the computer to start as usual

  See also:

  Error: Windows Explorer has stopped working

  http://support.Microsoft.com/kb/2694911

  (For Windows Vista)

• I have an error in my event viewer: the fault bucket + 45216 0xD1_athr, type the name of the event 0: BlueScreen. Can someone please explain to me how to solve this problem.

  I have an error in my event viewer: the fault bucket + 45216 0xD1_athr, type the name of the event 0: BlueScreen

  Can someone please explain to me how to solve this problem. My computer shuts down whenever I get on the internet. I need some answers please.

  You have a problem with a driver Atheros.

  It could be the network card is bad or the driver is damaged.

  If it is a wireless card, try to connect to the router with an ethernet cable. See if you can get an updated driver from the computer manufacturer's website.

  http://msdn.Microsoft.com/en-us/library/ff560244 (v = VS. 85) .aspx

• Entry Windows - Faulting module name event log: Converter - agent.dll - after the partition of 100 MB WIn2008 R2 online

  Hello

  Since my installation of Windows 2008 R2 (Web edition server) use the restore system 100 MB partition, I had to use this fix for this:

  VMware KB: A Windows 2008 R2 machine P2V Conversion fails at 96%

  to allow VMWare Converter (last 5.1) to also copy this partition but I never did because when I changed status od this partition to the online converter always stops on the connection to the machine Powered-> this local machine with the error "Unable to obtain material information for selected computer.". I noticed input error to the Windows Application event log that contains:

  Name of the failing application: vmware - converter.exe, version: 8.1.0.15346, time stamp: 0 x 51642354

  Name of the failed module: Converter - agent.dll, version: 8.1.0.15346, time stamp: 0 x 51642321

  Exception code: 0xc0000005

  Offset: 0x00084bbe

  ID of the process failed: 0x19d4

  Start time of application vulnerabilities: 0x01ce7402f38eeb43

  The failing application path: C:\Program Files (x 86) \VMware\VMware vCenter Converter Standalone\vmware - converter.exe

  Path of the failing module: C:\Program Files (x 86) \VMware\VMware vCenter Converter Standalone\converter - agent.dll

  Report ID: 7d2c66a6-dff6-11e2-ab7e-000c29da83b7

  There is also an entry of information:

  The description for event ID 1 source vmware-converter-worker is not found. Either the component that triggers this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.

  If the event is on another computer, the display information had to be saved with the event.

  The following information has been included in the event:

  VMware-converter-worker service started

  When I reboot the system and not to make agent system Converter online 100 MB recovery partition does not hang and I can perform the conversion without this small partition.

  Any ideas?

  Concerning

  Hello

  I'm back with the log file. The log contains only the related situation this topic. Before you start the new operation of conversion, I have removed all previous logs.

  Concerning

  EDIT: I checked the file workers journal and information:

  [PopulateVolumeProperties] \\?\Volume{90f40b30-30cd-11e2-849d-000c29da83b7}\ volume is the name of the \Device\HarddiskVolumeShadowCopy1 device.

  MEM > 2013 - 07 - 07T 22: 40:47.140 + 02:00 [info 06288 'Default'] [GetDriveLetterOrMountPoint] Mount point of volume \\?\Volume{90f40b30-30cd-11e2-849d-000c29da83b7}\ is \\?\Volume{90f40b30-30cd-11e2-849d-000c29da83b7}\

  MEM > 2013 - 07 - 07T 22: 40:50.881 + 02:00 [06288 panic "Default"] (recursion level Log 2) Win32 exception: Access Violation (0xc0000005)

  showed me where is the problem. I managed diskshadow.exe and executed delete conceals the entire operation. Now I can go ahead with the conversion. Thank you

• Metro Apps fail when you open the file to select/Save Chooser a file or folder - 1026, event ID 1000

  For all Windows 8 Metro Apps that have the ability to open a file or save a file (via the file picker), File Picker screen flashes and then disappears and the application crashes or or the user is not present an interface to select or save a file.

  The file selector used to work, but has not worked for about 2 months now.

  Check the Windows Application logs in case the viewer the following two errors always appear together when the file picker does not work (the example below error occurred while using an application called Sticky Notes):

  Source: .NET Runtime
  Event ID: 1026
  Application: Sticky Notes 8. exe
  Version of the Framework: v4.0.30319
  Description: The process was completed due to an unhandled exception.
  Exception details: System.ArgumentException
  Battery:
  at System.Runtime.ExceptionServices.ExceptionDispatchInfo.Throw)
  System.Threading.WinRTSynchronizationContext + Invoker. b__0 (System.Object)
  at System.Threading.QueueUserWorkItemCallback.WaitCallback_Context (System.Object)
  at System.Threading.ExecutionContext.RunInternal (System.Threading.ExecutionContext, System.Threading.ContextCallback, System.Object, Boolean)
  at System.Threading.ExecutionContext.Run (System.Threading.ExecutionContext, System.Threading.ContextCallback, System.Object, Boolean)
  at System.Threading.QueueUserWorkItemCallback.System.Threading.IThreadPoolWorkItem.ExecuteWorkItem)
  at System.Threading.ThreadPoolWorkQueue.Dispatch)
  at System.Threading._ThreadPoolWaitCallback.PerformWaitCallback)

  Source: Application error
  Event ID: 1000
  Name of the failing application: 8.exe Sticky Notes, version: 1.1.0.0, time stamp: 0x51ceae1a
  Name of the failed module: KERNELBASE.dll, version: 6.2.9200.16451, time stamp: 0 x 50988950
  Exception code: 0xe0434352
  Offset: 0x00014b32
  ID of the process failed: 0x1d0
  Start time of application vulnerabilities: 0x01ce87269da8f915
  The failing application path: C:\Program Files\WindowsApps\8251MarcoRinaldi.NoteTiles_3.4.0.0_neutral__9rvmmrcs6zgr6\Sticky Notes 8. exe
  Path of the failing module: C:\windows\SYSTEM32\KERNELBASE.dll
  Report ID: 7a632960-f92a-11e2-bea0-68942348047e
  Failed package name: 8251MarcoRinaldi.NoteTiles_3.4.0.0_neutral__9rvmmrcs6zgr6
  On a package of faults application ID: App

  Any idea on what could have caused this and how to fix it?

  System Restore creates a restore point "Undo" which allows you to cancel any act performed by the system restore.  In other words you can duck in time and if you don't like it you can return to the present.

  System Restore is a tool of recovery in the short term.  Dating two months in time isn't what it is so that a lot of work such as updates and settings not replaced and should be repeated.  She will play with happiness this task however.

  How to repair the operating system and how to restore the configuration of the operating system to an earlier point in time in Windows Vista (7 or 8).
  http://support.Microsoft.com/kb/936212/#appliesTo

  See, control Panel\All Control Panel Items\Recovery\ Open System Restore

  Is another software that you are running, in particular security at the origin of the problem software?

  How to perform a clean boot for a problem in Windows Vista, Windows 7 or Windows 8
  http://support.Microsoft.com/default.aspx/KB/929135

  You can even try your Safe Mode network management applications (the results can be a little Flaky).

  How to start Windows 8 in Mode safe
  http://www.bleepingcomputer.com/tutorials/start-Windows-8-in-safe-mode/

  This example can be worth a try, he runs the built-in administrator to check your Apps.

  This EXAMPLE (ONLY) may or may not work for you with your program, it uses the built-in Administrator account to perform the update?

  "It seems that the"Run as Administrator"command gives you administrative privileges only, and they are not enough to install Java (and OpenOffice, by association). To work around this problem, you must actually connect to the built-in administrator.   Open a command prompt (Admin) with admin rights by using the Windows key + X then select this option.   At the prompt, type:

  NET user administrator / Active: Yes

  Then disconnect from your regular account and folder administrator integrated, where you might be able to install the update.  When you are finished, open a session to your regular account and, for security reasons, disable the built-in using administrator account:

  «net user administrator / active: No.»

  Account administrator integrated - turn on or off in Windows 8
  http://www.eightforums.com/tutorials/9650-built-administrator-account-enable-disable-Windows-8-a.html

  When a system gets so mucked up it's often best to restart once again from the beginning.

• Error: wininit lsass.exe windows server restart, event ID: 1000, 1001, 1015, 6005, 6006

  Hi everyone, I recently joined in a Banking Corporation as a leader of IT below support that I explained about an error that is impossible to fix.

  This company is running windows server 2008 r2 standard 64 bit OS sp1.

  HP proliant DL380 G7 intel xeon
  system processor: intel xeon E5620

  This company is facing this problem since April 2014 to cultivate the date, but the question not yet fixed because there is no COMPUTER administrator in this endeavour to maintain this server. So, in this company, I'm the only guy with COMPUTER knowledge and my management was waiting for me to fix this error and to run the server without any problem.

  The last few months I've corrected several server issues related in this society as windows update, windows daily backup, SQL server backup, user permissions, disk space low and network troubleshooting and equipment computer issues etc...,

  But come to this lsass.exe I am unable to solve this problem I tried many ways to research online, but not yet fixed. Below you will find the details.

  *) fix for windows server 2008 R2 Standard sp1

  After the failed to install installation
  Fix for Windows (KB2545850)

  *) Tried to use the system tool
  But failed to solve problem

  *) I tried this command at the command prompt
  sfc/scannow
  result
  Full check of 100%.
  Windows resource protection did not find any breach of integrity.

  *) I also tried to change the registry of one of the web links of dell values, but there is no change at all.
  http://www.Dell.com/support/article/us/en/19/SLN291309/en

  *) I thought installing the fix and some other updates in safe mode only to try my luck, but when I tired to start the server in safe mode it takes a long time to start in it. But, I'll try again if this issue is going to fix through safe mode then please advise me on this.

  So to come back to this question, at the time of the restart, a small window will pop up as below.
  Windows has encountered a critical problem and will restart automatically in a minute. Please save your work now.

  *) I tried this in shutdown command prompt cmd - to stop this judgment but does not any.

  *) I've tried many ways to solve this problem, but none of them worked for me even I tried to upgrade from sp1 to sp2 but could not do so for the following reason:
  https://www.Microsoft.com/en-US/Download/details.aspx?ID=17669

  After downloading the software from the link above and when I tried to install error appear below.
  This service pack does not apply to the version of windows running on this computer.

  It is the only question that is impossible to fix. So, I need expert help to resolve this issue as soon as POSSIBLE.

  Note: I can not reinstall the operating system on this server because it runs many applications on the SQL 2008 database and also it is already configured with many services and I don't really know how many applications do I need to take a backup and how to configure manually. so if I reinstall OS and if I'm bored configurations or settings and then it will be difficult for employees who work on these applications. So I don't want to take the risk of doing as I said I am new to this company.

  Additional information: this sever when ever it will pop up as server will restart in one minute then it restarts to 3 times without any gap, then after an interval extended from 3 to 4 hours, then it will follow even as I said above. To understand better, I'll give you this good example: If the server restart to 09:00, then 2nd reboot will be at 09:02 and the 3rd reboot will be at 09:04 and then after 3 to 4 hours apart, as about 13:00 it restarts again for 3 times vice versa.

  Even I understand that I have to reinstall the OS to fix this stupid problem which is like a nightmare for me, but right now, I can't. So, please help me to solve this problem without reinstallation of server operating system.

  I expect the best answer to my question that will solve my problem without any problem to this server.

  Below the five examples are the main reason for my server restart. If you need anything that either more information please advice me I will answer according to your instructions.
  Event ID 1000
  Event ID 1001
  Event ID 1015
  Event ID 6005
  Event ID 6006

  Below, I have collected more information of the observer of events and even from now this server restarts again due to this error, I don't know what to do...!

  1st error:

  -System
  -Supplier
  [Name]  Application error
  -Event ID 1000
  [Qualification] 0
  Level 2
  Working 100
  Keywords 0 x 80000000000000
  -TimeCreated
  [SystemTime] 2016-02 - 11 T 07: 30:33.000000000Z
  EventRecordID 479745
  Application of channel
  Security
  -EventData
  Lsass.exe
  6.1.7601.18443
  5348920c
  ntdll.dll
  6.1.7601.18247
  521eaf24
  C0000374
  00000000000c 4102
  220
  01d16482b15bac9c
  C:\Windows\system32\lsass.exe
  C:\Windows\SYSTEM32\ntdll.dll
  5518c7e0-d091-11e5-88FE-68b5996a1808

  1 details of the error:

  The failing application name: lsass.exe, version: 6.1.7601.18443, time stamp: 0x5348920c
  The failed module name: ntdll.dll, version: 6.1.7601.18247, time stamp: 0x521eaf24
  Exception code: 0xc0000374
  Offset: 0x00000000000c4102
  ID of the process failed: 0 x 220
  Start time of application vulnerabilities: 0x01d16482b15bac9c
  The failing application path: C:\Windows\system32\lsass.exe
  The failed module path: C:\Windows\SYSTEM32\ntdll.dll
  Report ID: 5518c7e0-d091-11e5-88fe-68b5996a1808

  2nd error:

  -System
  -Supplier
  [Name]  Windows error reporting
  -EventID 1001
  [Qualification] 0
  Level 4
  Task 0
  Keywords 0 x 80000000000000
  -TimeCreated
  [SystemTime] 2016-02 - 11 T 07: 30:33.000000000Z
  EventRecordID 479746
  Application of channel
  Security
  -EventData
  0
  APPCRASH
  Not available
  0
  Lsass.exe
  6.1.7601.18443
  5348920c
  StackHash_802c
  6.1.7601.18247
  521eaf24
  C0000374
  00000000000c 4102
  C:\ProgramData\Microsoft\Windows\WER\ReportQueue\AppCrash_lsass.exe_6ddcb716254c9cb8578365fbfa251cf472753034_0d1bddf3
  0
  5518c7e0-d091-11e5-88FE-68b5996a1808
  4

  2 details of the error:

  Bucket of error, type 0
  Event name: APPCRASH
  Answer: No available
  Cabin ID: 0
  Signature of the problem:
  P1: lsass.exe
  P2: 6.1.7601.18443
  P3: 5348920c
  P4: StackHash_802c
  P5: 6.1.7601.18247
  P6: 521eaf24
  P7: c0000374
  P8: 00000000000c 4102
  P9:
  P10:
  Attached files:
  These files are available here:
  C:\ProgramData\Microsoft\Windows\WER\ReportQueue\AppCrash_lsass.exe_6ddcb716254c9cb8578365fbfa251cf472753034_0d1bddf3
  Symbol of the analysis:
  Recheck for solution: 0
  Report ID: 5518c7e0-d091-11e5-88fe-68b5996a1808

  3rd error:

  -System
  -Supplier
  [Name]  Microsoft-Windows-Wininit
  [Guid]  {206f6dea-d3c5-4d10-bc72-989f03c8b84b}
  [EventSourceName]  Wininit
  -EventID 1015
  [Qualification] 49152
  Version 0
  Level 2
  Task 0
  Opcode 0
  Keywords 0 x 80000000000000
  -TimeCreated
  [SystemTime] 2016-02 - 11 T 07: 30:33.000000000Z
  EventRecordID 479747
  Correlation
  -Execution
  [Pr

  ocessID] 0
  [ThreadID] 0
  Application of channel
  Security
  -EventData
  C:\Windows\system32\lsass.exe
  255

  3 details of the error:

  A process of critical system, C:\Windows\system32\lsass.exe, failed with status 255 code.  You must now restart the machine.

  error 4:

  -System
  -Supplier
  [Name]  Microsoft-Windows-Winlogon
  [Guid]  {DBE9B383-7CF3-4331-91CC-A3CB16A3B538}
  [EventSourceName]  Wlclntfy
  -EventID 6005
  [Qualification] 32768
  Version 0
  Level 3
  Task 0
  Opcode 0
  Keywords 0 x 80000000000000
  -TimeCreated
  [SystemTime] 2016-02 - 11 T 07: 35:43.000000000Z
  EventRecordID 479787
  Correlation
  -Execution
  [ProcessID] 0
  [ThreadID] 0
  Application of channel
  Security
  -EventData
  GPClient
  CreateSession
  00000000
  --------------------------------------------------------------------------------
  Binary data:
  In the words
  0000: 00000000
  In bytes
  0000: 00 00 00 00...

  4 details of the error:
  Winlogon notification subscriber takes a long time to handle the notification event (CreateSession).

  error 5:

  -System
  -Supplier
  [Name]  Microsoft-Windows-Winlogon
  [Guid]  {DBE9B383-7CF3-4331-91CC-A3CB16A3B538}
  [EventSourceName]  Wlclntfy
  -EventID 6006
  [Qualification] 32768
  Version 0
  Level 3
  Task 0
  Opcode 0
  Keywords 0 x 80000000000000
  -TimeCreated
  [SystemTime] 2016-02 - 11 T 07: 36:39.000000000Z
  EventRecordID 479792
  Correlation
  -Execution
  [ProcessID] 0
  [ThreadID] 0
  Application of channel
  Security
  -EventData
  GPClient
  116
  CreateSession
  04000000
  --------------------------------------------------------------------------------
  Binary data:
  In the words
  0000: 00000004
  In bytes
  0000: 04 00 00 00...

  Details of the error 5:
  Winlogon notification subscriber was 116 second (s) to handle the notification event (CreateSession).

  Thanks forward,

  SAI

  Hello

  I suggest that you post the application on Microsoft TechNet forum because we have experts working on these issues. You can check the link to post the same query on TechNet:

  https://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  Please do not hesitate to contact us if you have other questions related to Windows.

• Application name: mmc.exe

  Hello

  My server 2008R2 64 bit is sick. Running SQL 2005. I had the woek top guy and since then, I have this problem. They said that they have nothing did. It seems that it is the .net that is alos broken but alos so much more. I'm desperate and need help.

  Signature of the problem:
  Problem event name: APPCRASH
  Application name: mmc.exe
  Application version: 6.1.7600.16385
  Application timestamp: 4a5bc808
  Fault Module name: mscorwks.dll
  Fault Module Version: 2.0.50727.5448
  Timestamp of Module error: 4e153960
  Exception code: c0000005
  Exception offset: 000000000017f459
  OS version: 6.1.7601.2.1.0.272.7
  Locale ID: 2057

  Hello

  That your computer is under domain, you must contact the technet forum, where we have of the support technicians who are well equipped with the knowledge on the issues of domain, do visit the link provided below.

  http://social.technet.Microsoft.com/forums/en-us/winservercore/threads