Event ID 1542, the Service user profile and lack of Classes Root Key

Hello

OS: Windows Vista Home Premium SP1 32-bit

Symptoms:
Assosications not continued resets (among others)

Details:
HKEY_USERS\HKEY_USERS\MySID_Classes is missing on reboot
 
Event Viewer says:

Event ID 1542, the user profile Service
Windows cannot load a file of the registry classes.
DETAIL - the system cannot find the specified file.

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\hivelist is not an entry for
\REGISTRY\USER\MySID_Classes UsrClass.dat file

Open the registry and manually load the UsrClass.dat under the HKEY_USERS hive works :)

It's a bit like the same as http://www.dabcc.com/article.aspx?id=9762 (excluding the prospects of course)

Think that I have not tested: restore mode (cause it is disabled)

Thanks in advance,

PS Could you please move to the correct thread?

Hello Billygr,
 
Thanks for the reply.  To this point I would submit a form at: http://msdn.microsoft.com/en-us/aa497440.aspx.  This will be reviewed by the Microsoft Developer Network team.  Please keep me for resolution or if the problem is resolved.

Engineer James Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

Tags: Windows

Similar Questions

  • I created a new Admin account and when I went to her, I got the message: "The service user profile Service has no logon. The user profile Service failed to load.

    I created a new Admin account and when I went to her, I got the message:

    "The service user profile Service has no logon.  The user profile Service failed to load.

    What's up with that?

    Hello

    References to Vista also apply to Windows 7.

    You can try to fix it with Safe Mode - repeatedly press F8 as you bootup. The ADMIN account in trunk
    Mode has no default password (unless someone has changed the password so it should be available).

    Some programs such as the updated Google (if you added the toolbar Google, Chrome or Google Earth)
    has been known to cause this problem.

    Error message when you log on a Windows Vista-based or Windows 7 using computer a
    Temporary profile: "the user profile Service has no logon. Unable to load the user profile.
    http://support.Microsoft.com/kb/947215

    Difficulty "the user profile Service has no logon. User profile cannot be loaded. "Error in Windows 7
    http://www.SevenForums.com/tutorials/186131-user-profile-service-failed-logon-user-profile-cannot-loaded.html

    How to fix error "your user profile was not loaded correctly! You have been connected with a
    temporary profile. "in Vista & Windows 7.
    http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.html

    BE VERY CAREFUL IF YOU USE THIS ONE:

    DO NOT USE THE ACCOUNT HIDDEN ON A DAILY BASIS! If it corrupts you are TOAST.

    How to enable or disable the built-in Windows 7 Administrator account
    http://www.SevenForums.com/tutorials/507-built-administrator-account-enable-disable.html

    Use the hidden administrator account to lower your user account APPLY / OK and then lift it to ADMIN.
    This allows clear of corruption. Do the same for other accounts if necessary after following the above message.

    You can use the hidden - administrator account to make another account as ADMINISTRATOR with password even
    (or two with the same password) use a test or fix the other.

    You can run the Admin account hidden from the prompt by if necessary.

    How Boot for Windows 7 System Recovery Options or use a Windows 7 boot disk.
    http://www.SevenForums.com/tutorials/668-system-recovery-options.html

    What are the system recovery options in Windows 7?
    http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7

    How to create a Windows 7 system repair disc
    http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html

    If you cannot access your old account, you can still use an Admin to migrate to another (don't forget
    always leave to an Admin who is not used except for testing and difficulty account).

    Difficulty of a corrupted user profile
    http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

    I hope this helps.

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

  • "The service user profile Service has no logon. User profile cannot be loaded. "and new users are not created in the registry, that is it please help

    I am trying to create new users on my computer windows 8 but it dosent open, I get a message "the service user profile service has no logon. User profile cannot be loaded. "and new users are not created in the registry, that is it please help

    I had the same problem.  Get the «user profile service has no user of logan...» "I tried everything I found online and nothing has worked.  Then I reinforced to the back and looked at the whole picture.  It turns out that it wasn't a computer after all problem but a question of the user.  Under folder C:/users/default in the end I managed to delete all subfolders except appdata.  So when you went to create a new user he could not find the correct files to copy to the new profile to store information in.  To ensure that I had a correct records back into the C:/users/default folder, I went on another computer and just copy paste the new default folder from another computer in the folder users on my computer and erased mine.  Of course I could create my comments and new users account once again.  Finally.
  • Could not connect to the service user profile Service.

    I have a little disconcerting problem.  Every day or two, I can not connect to Windows correctly.  When I start, select my account (which is also the unique administrator account) and enter my password, it spends an abnormally long time in the 'Starting Windows' screen, then I get the following message pop up in the notification area:

    "Unable to connect to a windows service.
    Windows could not connect to the service user profile Service.
    This problem prevents limited users to logon to the system.
    As an administrator, you can review... »

    Shortly after this message, I get a windows error message saying:

    "Location is not available.
    C:\Windows\system32\config\systemprofile\Desktop is not accessible.
    Access is denied. »

    This seems just a desktop computer black with only the Recycle bin icon on it, and the old Windows Start button in the taskbar.

    While trying to understand what is happening, I looked into the application of 'Problem reports and solution' in the control panel and found that every time this happens, I also have a corresponding event of "Stopped working" "Routing and remote access.

    I then restart using F8 at startup and choose the one that says something to the effect of "using the last good configuration known."

    I'm not sure what that means at all, but I hope that one of you people can help.

    Thank you!

    Hello any Leafs fan,

    Thanks for posting on the Microsoft answers Forum.

    Looks like you're running only because of using a system restore to get back when your system is running. Now, you want to know what caused it.

    Usually, when the above error occurs, it is due to a corrupt user profile.
    The best way to fix this is to remove the user profile.

    • Go to the Start button
    • Right click on computer
    • Go to the properties
    • Go to Advanced System Properties on the left pane
    • Select the Advanced tab
    • Go to the user profile Section and click on the settings button
    • Find the profile for the that you want to remove and click Remove.  (It's the best way to remove the local profile in Windows Vista).
    • Connection again and you will get a new profile.
    • To get your Favorites return, go to the old profile in C:\users and copy the data manually.

    The only way to identify what caused the error with the user profile is to try to reproduce it.

    If you have not installed the update of Windows, then you can go to Windows updates and see what are the updates must be installed and manually download them and install them one at a time. Between the installation of the system, make sure you have a restore point that you can go back to if necessary. Once an update is installed, then close and open a session back (or reboot if required by the software update) and see if you get the error user profile. If the error occurs, then go to Services and see if the user profile service is running and set to automatic.

    If you are not able to do anything when the problem occurs, then try to start in safe mode using the F8 key and see if the problem occurs in safe mode.

    You can also look in the event viewer to see if there is no dealing with event profile user or Windows Update errors.
    To get to the event viewer, you can type in eventvwr.msc in the box start the search. This will bring up the event viewer and you can view the summary logs and see what kind of errors you encounter.

    Please post with your results and if you need further assistance.

    Sincerely, Marilyn
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Re: Satellite C660-242 - "the service user profile Service has no logon.

    By turning on the laptop the following message when you try to enter the password
    "The service user profile Service has no logon.
    "Unable to load the user profile.

    Hello

    Check http://support.microsoft.com/kb/947215 and post comments to the first Microsoft document on this issue.

  • Log the user in the section problems - the service user profile service has no logon

    Hello

    Every time I try and log on to the laptop computer, the following message is displayed.

    "The service user profile Service has no logon.
    Unable to load the user's profile.

    other profiles can be connected without any problems.

    If you can help that would be great

    See you soon

    Check http://support.microsoft.com/kb/947215
    Maybe this can help you.

  • Cannot load a user profile... erreo "the failure of the service USER PROFILE SERVICE to connect.

    Hello

    not able to load my 1st admin. The user's profile, every time I try to load the message appears "the failure of the service USER PROFILE SERVICE to open a session. I tried some of those ways, but nothing happens. Please help me with this problem...

    1. reboot your computer and press F8 multiple times until you see a menu similar screen, if you see the Windows startup screen, then repeat this step
    2. highlight and press enter on Mode safe mode with command prompt. Try to connect to it. If it still does not work, proceed to step17
    3. If you are able to connect, once the command prompt appears, type: net user administrator Word of past / active: Yes (you can specify the password for the administrator account.)
    4. If you get a message "the command completed successfully" and then restart your computer by typing: shutdown - r
    5. start again by pressing F8, but this time choose just the SafeMode.
    6. you will be able to log in as administrator with the password set in step 3
    7 hit (windows logo) + r.
    8. type regedit
    9. once the Registry Editor opens, search for HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList
    10. in the left pane, find the one that begins with S-1-5... and ends with. BAK; If you can't find one, go to step 15
    11 right-click and click Rename, and then change it. TO BAK. BK
    12 right-click with the same numbering but without the. BAK and Add. BAK add at the end
    13. right click on the one that you have renamed in BK and clickRename, remove the. BK
    14. Subsequently, you have activated the. BAK to the end of the second entry in the first. That should probably fix your problem.
    15. If you do not find one. BAK then try this: open Explorer Windows for C:\Users\Default\AppData\Local\Application data
    16. If you find an other Application Data below the one you are on, and then delete. Who should probably also solve your problem.
    17. If you can not log in Mode safe mode, restart and press F8 until you see the menu again, and then press enter highlightingRepair your computer
    18 wait for all the Windows files to finish loading, then hitNext when it asks for the language of the keyboard.
    19. try to connect here also, choose your username in the menu drop-down, type the password, then go to step 23
    20. If it still doesn't work, then if you still have your Windows installation CD, put it in, and then restart your computer.
    21. press F12 until you see a menu of boot options, choose boot from CD
    22. the language of the keyboard and then click Next. Find repair your computer for a little below the center-left.
    23. choose Open command prompt and type: net user administrator / Active: Yes password (here again you can specify a password)
    24. close the command prompt and click on restart and go to step 5 "

    Here's a Fixit for cause of you, so that you don't have to do it yourself:

    http://support.Microsoft.com/kb/947215

    "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

  • "The service user profile Service has no logon. User profile cannot be loaded. »

    When I try to log on to my site its tell me what; "The service user profile Service has no logon. User profile cannot be loaded. »

    Hello cockateils8,

    Thank you for visiting the website of Microsoft Windows Vista Community.

    Try the rest of the stage in this article:

    Change the settings of the REGISTRY can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the REGISTRY settings configuration can be solved. Changes to these settings are at your own risk.

    To resolve this issue, follow these steps:

    1. Delete the profile by using the computer properties dialog box. To do this, follow these steps:

      1. Click Start, right-click computer and then click Properties.
      2. Click on change settings.
      3. In the System Properties dialog box, click the Advanced tab.
      4. Under user profiles, click settings.
      5. In the user profiles dialog box, select the profile you want to delete, click on remove and then click OK.
    1. Click Start, type regedit in the start search box, and then press ENTER.
    2. Search for, and then expand the following registry subkey:
      HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList
    3. Right-click the SID that you want to delete and then click on remove.
    4. Log on to the computer and create a new profile.

    Pasted from http://support.microsoft.com/kb/947215>

    This should solve your problem.

    Let us know if these steps solve your problem.  I hope the information is useful.

    Kind regards

    Anthony
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • I get the message "the service user profile Service has no logon. User profile cannot be loaded. »

    Original title: cannot open a session

    I get the message "the service user profile Service has no logon. User profile cannot be loaded. "I can't get on my computer. What can I do? Help, please! I need to get the work done.

    Hello

    These methods should help for Windows 7 or Vista.

    References to Vista also apply to Windows 7.

    You can try to fix it with Safe Mode - repeatedly press F8 as you bootup. The ADMIN account in trunk
    Mode has no default password (unless someone has changed the password so it should be available).

    Some programs such as the updated Google (if you added the toolbar Google, Chrome or Google Earth)
    has been known to cause this problem.

    Error message when you log on a Windows Vista-based or Windows 7 using computer a
    Temporary profile: "the user profile Service has no logon. Unable to load the user profile.
    http://support.Microsoft.com/kb/947215

    How to fix error "the user profile Service has no logon. User profile cannot be loaded. »
    http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

    How to fix error "your user profile was not loaded correctly! You have been connected with a
    temporary profile. "in Vista
    http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.html

    BE VERY CAREFUL IF YOU USE THIS ONE:

    DO NOT USE THE ACCOUNT HIDDEN ON A DAILY BASIS! If it corrupts you are TOAST.

    -------------------------------------------------------------------------------------------------------------------------------------

    For Windows 7:

    How to enable or disable the built-in Windows 7 Administrator account
    http://www.SevenForums.com/tutorials/507-built-administrator-account-enable-disable.html

    Use the Admin account hidden to lower your user account APPLY / OK then wear again to
    ADMIN. This allows clear of corruption. Do the same for other accounts if necessary after the
    above message.

    You can use the hidden - administrator account to make another account as an ADMINISTRATOR with your same
    password (or two with the same password) use a test or difficulty to another.

    You can run the command Admin account hidden from the prompt here if
    necessary.

    How Boot for Windows 7 System Recovery Options or use a Windows 7 boot disk.
    http://www.SevenForums.com/tutorials/668-system-recovery-options.html

    What are the system recovery options in Windows 7?
    http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7

    How to create a Windows 7 system repair disc
    http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html

    -------------------------------------------------------------------------------------------------------------------------------------

    For Vista:

    How to enable or disable the real built-in Administrator account in Vista
    http://www.Vistax64.com/tutorials/67567-administrator-account.html

    Use the Admin account hidden to lower your user account APPLY / OK then wear again to
    ADMIN. This allows clear of corruption. Do the same for other accounts if necessary after the
    above message.

    You can use the hidden - administrator account to make another account as an ADMINISTRATOR with your same
    password (or two with the same password) use a test or difficulty to another.

    You can run the command Admin account hidden from the prompt here if
    necessary.

    This tells you how to access the System Recovery Options and/or a Vista DVD
    http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

    What are the system recovery options in Windows Vista?
    http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-system-recovery-options-in-Windows-Vista

    How to create a Vista - free methods recovery disk
    http://www.Vistax64.com/tutorials/141820-create-recovery-disc.html

    -------------------------------------------------------------------------------------------------------------------------------------

    If you cannot access your old account, you can still use an Admin to migrate to another (don't forget
    always leave to an Admin who is not used except for testing and difficulty account).

    Difficulty of a corrupted user profile
    http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

    I hope this helps.

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

  • Can not connect - when entering a password message "the service user profile service has no logon. Failed to load profile \User' cannot access start menu to apply the options.

    Can not connect - when entering a password message "the service user profile service has no logon. Failed to load profile \User' cannot access start menu to apply the options.

    Hello

    1st thing to try is the system in safe mode restore to before the problem

    http://www.windowsvistauserguide.com/system_restore.htm

    Windows Vista

    Using the F8 method:

    1. Restart your computer.
    2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
    3. Select the Safe Mode option with the arrow keys.
    4. Then press enter on your keyboard to start mode without failure of Vista.
    5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
    6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

    If that does not solve it read more

    read the tutorial below

    http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

    When you log on a Windows Vista-based or a Windows 7 computer by using a temporary profile, you receive the following error message:

    The user profile Service has not logon. User profile cannot be loaded.

    http://support.Microsoft.com/kb/947215#letmefixit

    Your user profile was not loaded correctly! You have been logged on with a temporary profile.

    http://support.Microsoft.com/kb/947242

    If you tried to log on to Windows and received an error message telling you that your user profile is damaged, you can try to fix it. You will need to create a new profile and then copy the files from the existing to the new profile. You must have at least three user accounts on the computer to perform these operations, including the new account that you created.

    http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile

  • Can't connect! "The service user profile Service has no logon. User profile cannot be loaded. »

    I can't log on to my laptop. I get the message "the service user profile Service has no logon. User profile cannot be loaded. "Can anyone help?

    Hello

    1st thing to try is the system in safe mode restore to before the problem

    http://www.windowsvistauserguide.com/system_restore.htm

    Windows Vista

    Using the F8 method:

    1. Restart your computer.
    2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
    3. Select the Safe Mode option with the arrow keys.
    4. Then press enter on your keyboard to start mode without failure of Vista.
    5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
    6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

    If that does not solve it read more

    read the tutorial below

    http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

    When you log on a Windows Vista-based or a Windows 7 computer by using a temporary profile, you receive the following error message:

    The user profile Service has not logon. User profile cannot be loaded.

    http://support.Microsoft.com/kb/947215#letmefixit

    Your user profile was not loaded correctly! You have been logged on with a temporary profile.

    http://support.Microsoft.com/kb/947242

    If you tried to log on to Windows and received an error message telling you that your user profile is damaged, you can try to fix it. You will need to create a new profile and then copy the files from the existing to the new profile.

    http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile

  • Error message "the service user profile Service has no logon. Unable to load the user profile"How can we get in the laptpop to solve the problem? /

    We get the error message "the service user profile Service does not logon, user profile cannot be loaded."  Prevents us from entering the computer laptop-so how to solve this problem?  Help?

    Hi LisaPie,

    Step 1: You can run the fixit available in the article below

    Error message when you log a computer Windows Vista-based or Windows 7 by using a temporary profile: "the user profile Service has no logon. Unable to load the user profile.
    http://support.Microsoft.com/kb/947215

    Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

    How to back up and restore the registry in Windows
    http://support.Microsoft.com/kb/322756/

    If you cannot start the computer in normal mode, try the steps in safe mode with networking

    Step 2: Start the computer in safe mode with network. To do this, follow the steps below:

    Access the menu advanced startup options by turning on your computer and pressing the button F8 before Windows starts. Advanced startup options menu select SafeMode with networking

    http://Windows.Microsoft.com/en-us/Windows-Vista/advanced-startup-options-including-safe-mode

    Thank you, and in what concerns:

    Ajay K

    Microsoft Answers Support Engineer

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Log: error message: "the service user profile service has no logon failed to load the user profile.

    Error message: "the service user profile service has no logon failed to load the user profile.

    Unable to connect.

    ·                        Restore point:

    Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

    Try a restore of the system once, to choose a Restore Point prior to your problem...

    Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    If the above does not work:

    ·                        http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

    See if the information in the above tutorial will help you.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    http://support.Microsoft.com/kb/947215#letmefixit

    Error message when you log a computer Windows Vista-based or Windows 7 by using a temporary profile: "the user profile Service has no logon. Unable to load the user profile.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

    Difficulty of a corrupted user profile

    After creating the profile, you can copy the files from the existing profile. You must have at least three user accounts on the computer to perform these operations, including the new account that you created.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    http://support.Microsoft.com/kb/947242

    A temporary profile is loaded after you connect to a Windows Vista-based system

    See you soon.

    Mick Murphy - Microsoft partner

  • I also, I get the error "the service user profile Service has no connection, failed to load the user profile" but I have not been able to correct the problem by following the listed solutions.

    I got the error "the service user profile Service has no connection, failed to load the user profile" when you try to use my desktip.  It is on the login page.  My account icon loads and the guest account. I have enter my password as an administrator and get the error message listed above. I followed all the solutions I could find and it is not corrected.

    I have a slight hitch, after several failed here, I checked the domestic Group on my laptop and I have high listed as connected to the Group Home Office; with all the files.  How can I fix the desk top to coinside with his status of being online.  Yet once, my counter top will not recognize the password, but the desk top shows online in the home group.

    Home Group is Windows 7.

    Here is the Vista Forums.

    What operating system do you use?

    Vista info below:

    ·                        Restore point:

    Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

    Try a restore of the system once, to choose a Restore Point prior to your problem...

    Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    If the above does not work:

    ·                        http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

    See if the information in the above tutorial will help you.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

    Difficulty of a corrupted user profile

    After creating the profile, you can copy the files from the existing profile. You must have at least three user accounts on the computer to perform these operations, including the new account that you created.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    http://support.Microsoft.com/kb/947242

    A temporary profile is loaded after you connect to a Windows Vista-based system

    See you soon.

    Mick Murphy - Microsoft partner

  • WINDOWS 7 LOGON WONT ALLOW ME IN: IT SAYS "the service user profile service has no logon user profile loaded canoe."

    IT is SAID (the service user profile service has no logon user profile loaded canoe)

    I help carn can't get into my computer, I am the only user and administrator.

    How to fix error "the user profile Service has no logon. User profile cannot be loaded. »
    http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

    "The user profile Service has no logon. Unable to load the user profile.
    http://support.Microsoft.com/kb/947215

    JS
    http://www.PAGESTART.com

    Never be afraid to ask. This forum has some of the best people in the world to help.

Maybe you are looking for

  • Sony PlayMemories Mobile crashing

    Hello I recently bought a Sony Xperia 10 '' Tablet (Android ver 4.3) that I can use the NFC to control a Sony HDR-CX330 videocam. The first couple of times I used it, it worked fine, but now the PlayMemories Mobile application crashes whenever I try

  • New Sansa Clip + turns off after a few minutes of play audiobook...

    Hello I was wondering if someone could help me.  Have been enjoying my new Sansa Clip + for the past two weeks.  Just been using the function of radio - finally understood how to load an audio cd on the drive.  The drive is recognized on my computer,

  • Page Web scrolls to the bottom of the page

    Original title: scroll, scroll, scroll and I can't make it stop! When I open just about anything on the internet, it starts to scroll to the bottom of the page - then stops - try to go to the top - it scrolls everything right down... If I try to go t

  • Will there be security of Microsoft (or any other company) programs that actually work?

    I'm currently under Windows Vista Home Premium, Service Pack 2 on a Dell Studio 450, 64 bit OS, 4 GB of RAM.  For security, I have the full licensed version of McAfee (including firewalls, anti-Spam, Phishing, & scanning in real time, by email, onlin

  • 13 GB of ram 'reserved equipment. "

    I have 16 GB of ram and I can use about 3 GB. I checked the Task Manager and it said that 13 GB of ram is material booked I really want to create videos of 60 fps on movie maker and this absurd issue prevents me. can anyone help? :(