event listener for when the Panel is open?

is there an event listener for when a CEP Panel is open.

I have a persistent Panel the onload works only when the Panel is opened for the first time. I want to keep persistent, but I want to know when the Panel is open again

Maybe I've misunderstood something, because my English is bad. Unfortunately the listener for events at the opening of the Panel, I also have not found, I had to go through the back door.

Tags: Illustrator

Similar Questions

  • What type of event is triggered when the Panel is collapsed?

    I'm working on an extension and I hit a dead-end. It seems that when you click on the Control Panel, a type of window.loaded event fires. But what type of event is triggered when reduce you the rear panel in the shape of the icon?

    I want to link the serialization to the window.unload or window.close event, but nothing similar seems to work, which means that such an event is not raised.

    Any ideeas?

    Hello

    Our next version of the CEP will include support for resizing by program an extension and receive events when the visibility of the Panel has been changed for example just collapsed.

    Kind regards

    LEA

  • Why accident to explore Windows vista and mouse slow down when the Panel is open?

    My computer works fine except when I try to open the control panel.  Then windows explore crashes, my mouse is useless and impossible to close the control panel by using the menu of the task.  Everything disappears when I managed to select restart windows Explorer and the closed control panel.  I have seen a lot of messages from people having the same problem but I still see a response that it heals.  Microsoft want money to repair their fault and I'm not ready to feed their greed. If anyone else can help?

    Hello

    What antivirus/antispyware/security products you have on your machine? Include everything you
    ever had including those that you uninstalled. (These can leave leftovers that can cause strange)
    questions.)

    Search all .cpl files most will be in "C:\Windows\System32" However, you can have
    others. Click on each of them at a time and see if it does not start - if so right click on it and
    Rename it using cpZ as the extension is easy to find. Try Control Panel - if no Dungeon of joy
    try all the .cpl files. (Note that other people find other subfolders under C:\Windows should
    not be judged because they are not active.)

    Some of them are appwiz.cpl firewall.cpl, desk.cpl, powercfg.cpl, inetcpl.cpl, timedate.cpl and others.

    Try these in case the General corruption has a role to play:

    Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

    Enter this at the command prompt - sfc/scannow

    How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
    generates in Windows Vista cbs.log
    http://support.Microsoft.com/kb/928228

    Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.

    How to run the check disk at startup in Vista
    http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

    ---------------------------------------

    Icons do not appear in the Control Panel, or you cannot start Control Panel, Windows Welcome, or
    Games in Windows Vista
    http://support.Microsoft.com/kb/936686/en-us

    The Control Panel window will not open in Windows Vista
    http://www.tips4pc.com/articles/Windows%20Vista/control_panel_window_will_not_op.htm

    It was reported a updated driver it has blocked, so have you updated drivers
    lately? Also check the driver updates in Windows Updates.

    I hope this helps.

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

  • onClick event work not when you try to open an image in Photoshop CC2015 extension Panel

    Hello

    I am writing an extension for CC2015 which opens a panel containing the tab page layouts and a few buttons.

    I want the buttons to perform a function onClick that opens a PNG file in Photoshop, but I can't seem to get this function to work as expected.

    The main parts of my index.html for the extension that defines one of the buttons is:

    < button class = "CLASS BUTTON" id = "ID of the BUTTON" role = "BUTTON" > BUTTON NAME < / button >

    I then added a function to the event listener for the button (see below) who works on the search for the name of the id of the button:

    < script type = "text/javascript" >

    document.getElementById('BUTTON_ID').addEventListener ("click", onClickButton, false);

    function onClickButton()

    {

    var imageFile = new File("C:/FOLDER/FILENAME.png");

    docRef = app.open (imageFile);

    }

    < /script >

    This piece of Javascript above falls in this part here:

    {

    imageFile var = new File ("FILENAME.png");

    docRef = app.open (imageFile);

    }

    For some reason any image does not open the button click on with the bit above the script, but if I run this code snippet in isolation by running the following in the ESTK the PNG file opens perfectly fine in Photoshop

    #target photoshop

    imageFile var = new File ("FILENAME.png");

    docRef = app.open (imageFile);

    I tested the event listener and the onClick and everything seems to be fine here because if I replace the part app.open of the script with a simple alert illustrated under the button returns a new window with the current alert text:

    < script type = "text/javascript" >

    document.getElementById('BUTTON_ID').addEventListener ("click", onClickButton, false);

    function onClickButton()

    {

    Alert ("you pressed me");

    }

    < /script >

    If anyone has information as to where I have gone wrong here it would be great that I don't immediately see the wood for the trees.

    Thank you.

    Hi Chris,

    you mix JSX and JS, and it won't work.

    The Virtual Machine that interprets JS is the Google V8 engine, belonging to the CEF (integrated framework chrome - the HTML group container).

    The Virtual Machine that interprets JSX (Extendscript) belongs to Photoshop.

    If you say that the V8 "app.open (imageFile)" he has simply not understand.

    JSX code should belong to the JSX file, like:

    function openImage(imageName){
        app.open(new File(imageName));
    }
    

    and in the JS, you need to:

    function onClickButton() {
      var csInterface = new CSInterface();
      csInterface.evalScript("openImage('C:/FOLDER/FILENAME.png')", function(res) { console.log(res); }
    }
    

    I hope this helps.

    Davide Barranca

    ---

    www.davidebarranca.com

    www.cs-extensions.com

  • How to prevent a TCP connection that is closed when the VI who opened it terminated.

    Hello everyone.

    I'm developing an application based on the servers and clients communicate through TCP in LabVIEW 2012.

    When the Server/client opens a TCP connection, it starts an asynchronosly running "Connection Manager", to which connection reference that takes so all communication happening. It all works very well.

    -J' have a situation where a client connection manager can be informed of another 'new' server. I would like to open the connection (to see if it is still valid) and then pass this reference of connection to the main client code to spawn a new connection manager. This avoids lock me up the Client code main with an ish timeout if the 'new' server does not really accept connections.

    The problem is that if the connection manager that opens the connection to the 'new' server is stopped, then it seems to destroy the reference he opened. This means that the other connection manager that has been happily character with the 'new' server has closed TCP communications (I get an error code 1 on an entry).

    I created an example to illustrate the issue which should be used as follows:

    1 run server.vi - he will listen for a connection on the specified port on his comics.

    2. run Launcher.vi CH - it will open a connection to the server and pass the TCP reference to an instance of connection Handler.vi, which he started.

    3. the connection manager needs to send data to the server

    4. stop the Launcher.vi CH

    5. the will of Handler.vi connection error.

    Any suggestion would be appreciated.

    See you soon

    John

    Do not perform the opening and closing of the TCP connection in Subvi. Do this to master VI.

  • Graphic CVI axis only updated when the Panel is active, but updated waveform is in the inactive Panel

    Hello

    I have a problem when I want to save a screenshot of the Panel with the GetPanelDisplayBitmap & SaveBitmapToPNGFile functions. The screenshot of the Panel is done when the Panel is hidden or inactive. Thus drawing events don't have facts.

    Please take a look at the attached screenshots:

    (1) manual measurement and life-saving operation, the saved data is ok

    (2) measure hidden and functioning economy, the saved data is not correct, the axis were not my updates

    (3) bring the Panel forward, axis had been updated

    Is it possible to force an update of the axis without back panel to the front or set it as active panel?

    Best regards

    Vitali

    1)

    2)

    3)

    I think that it is a bug of the CVI.

    This is how it works:

    -SetCtrlAttribute (Panel, control, ATTR_ZPLANE_POSITION, 0);  without this step the axes will be not updated!

    -for each channel {PlotWaveform ;} (.)

    - ...

  • my pc CPU running at 100% for all the programs I opened / what is the problem and how to solve?

    my pc CPU fan runs very strongly & the processor running at 100% for all the programs I opened. DO NOT KNOW IF IT IS A VIRUS IN THE PC WAS WORKING FINE A FEW DAYS AGO. How can I solve this issue?

    Hello

    You did changes to the computer before this problem?

    Step 1: Check if the problem persists in the clean boot state.

    From your computer by using a minimal set of drivers and startup programs so that you can determine if a background program is interfering with your game or program. This type of boot is known as a "clean boot".

    Reference:
    How to configure Windows XP to start in a "clean boot" State
    http://support.Microsoft.com/kb/310353

    When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

    1. click on start and then click Run.
    2. type msconfig and click OK.

    The System Configuration Utility dialog box appears.

    3. click on the tab general, click Normal Startup - load all services and device drivers and then click OK.
    4. When prompted, click on restart to restart the computer.

    Step 2: Also, look for error messages in the event viewer. If you find error messages after return the exact error message so that we can help you better.

    Reference:
    Using the event viewer
    http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/snap_event_viewer.mspx?mfr=true
    Understanding of event viewer
    http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/event_overview_01.mspx?mfr=true
    Procedure to view and manage event logs in Event Viewer in Windows XP
    http://support.Microsoft.com/kb/308427

    I would also refer the below article which may be useful.

    The CPU utilization reaches 100 percent when you run programs after you install Windows XP Service Pack 2
    http://support.Microsoft.com/kb/890582

  • 7520 Photosmart printer - ink cartridges carriage out when the cover is opened

    The transport does not automatically moves himself posted to the right of the machine when the lid is open.  I'm unable to change empty ink cartridges.  The machine was purchased new April 2013 and is out of warranty.  I turned off and turned it back over 15 min later, no change.

    Any suggestions?

    Hi @Clayball,

    I see that you have problems with the transport not to move to the middle in order to change the cartridges.

    I would like to help.

    I would like to do a hard reset to see if that will solve the problem.
    Let the printer and disconnect the printer cable and the wall socket for 60 seconds.
    Reconnect the power cable to the output of the printer and the wall, and not a surge protector.
    This ensures that the printer is full on and can help this situation.

    If the transport does not move freely when grasp the front, it's OK to gently push the carriage to the left or right to move along the rail.
    Fragments of paper can get lodge between the cart and the gas station.  It is important to look at the far right of the printer with a flashlight to make sure there is no debris.

    I handed a document with some measures to try to resolve the transport stall.

    A Message appears 'Transport Jam' on the control panel.

    If the problem persists, in 800-474-6836, please call our technical support. If you do not live in the United States / Canada region, please click the link below to get help from your region number.
    Contact HP.

    Good day!
    Thank you.

  • Lightroom Develop module, operating instructions a Committee opened nearby when another Panel is open

    I wish I had my module to develop panels closed so I don't have to scroll to the bottom of the page for the next panel, but I don't want to close the control panel and then open another Panel. So here's my question:

    Q: is far from having the panels automatically closes when the other is open? For example, if I work in the base Panel and pass to say the detail panel.

    Hi davidwi,

    Please right click on the Panel, and choose Solo mode to open a panel at a time.

    Let me know if it helps.

    ~ UL

  • Skype rings only when the application is open

    I have a Skype number for my phone a few days ago and I just noticed a problem. When people try to call me using my Skype number, it sounds only when the application is open and the phone is unlocked. However, people can still call me normally on my Skype ID, it is locked or not currently open to the app. It's a rule I missed when having a Skype number?

    I reset my phone to factory settings and it works now.

  • Skype number rings only when the application is open

    I have a Skype number for my phone a few days ago and I just noticed a problem. When people try to call me using my Skype number, it sounds only when the application is open and the phone is unlocked. However, people can still call me normally on my Skype ID, it is locked or not currently open to the app. It's a rule I missed when with a Skype number?

    (Previously posted this in the Android subforum)

    I reset my phone to factory settings and it works now.

  • Satellite A100-237 screen remains off when the lid is opened

    OK I'll try my best to explain this. My power settings are adjusted so that the computer has no effect when the lid is closed - except for the display, which is turned off and back on when the lid is opened (normal behaviour).

    Now, in rare occasions, when I opened the back cover, the screen doesn't come back, unless I close the back cover and open again. It is not a big problem for me at the moment, but I'm afraid that the connections of the screen with the motherboard by the cover have been damaged.

    BIOS version 2.00, maybe an update could solve it?

    Thanks in advance.

    Hi Ataberk,

    I think that your problem can be caused by the micro-switch that will detect when the laptop lid is closed. If this switch is in the open position so your screen will remain off even with the lid open. The idea here is that you can get the display by closing and opening the lid again.

  • Laptop starts up when the lid is opened

    I spilled some water on the laptop. I used AC power with no battery attached. When this happens, I quickly pulled the plug. I knew that the warranty does not damage the water so I dissamble each component and put them in dry box for a week. Then I used alcohol to remove all stains left behind.

    After I got everything back up, the laptop starts fine when the lid is closed and hooked to an external monitor. Can I use any program withou any problem. But it wouldn't start when the cover is open. It was as if someone was holding down the power button to force the computer to turn off.

    My question is, how the laptop detects if the lid is open or closed? It is magnetic, or is it using a switch as a reed switch?

    my laptop is HP Pavilion SleekBook 14 14-B031TU with the motherboard: DA0U33MB6D0-698523-001.

    Kind regards

    Ahmad

    Most newer laptops have a sensor (switch) magnetic in the cover of the screen bezel or the touchpad.

    You can test that by sliding a small magnet around the telescope cover touchpad area and/or.

  • Effectiveness of password computer when the computer is open

    The computer access password act as a block, restrict or prevent access to the computer by unwelcome intruders, when the computer is open?

    D I'm Kaye

    When you put the password on your computer only people who know the password can log into the account protected by password. When your computer is started, or is in sleep or lock, when you try to access it, it will ask for the password.

    However, when you already login in your PC and if you just leave your PC, other people could access while you are connected but you can either lock the PC when leave you or stop or turn sleep mode.

    You can also change the setting in a way to browse automatically sleep mode or even display the server if you do not use your PC after a period (e.g. 15 minutes) and when someone tries to access the PC, he or she will need to enter password.

    For better security, it is also recommended to protect your system with bitlocker, for protection (if the version of your Windows supports this feature):

    http://Windows.Microsoft.com/en-us/Windows7/products/features/BitLocker

  • What kind of image is in a document. INDD so when the file is opened you get the message 'document contains 6 links to sources that are missing' and when you click OK to recreate a link to missing files, the document opens with the images?

    What kind of image is in a document. INDD so when the file is opened you get the message 'document contains 6 links to sources that are missing' and when you click OK to recreate a link to missing files, the document opens with the images? Missing images are not on my computer, but when the document opens the images are there. I can copy and paste the INDD images in Illustrator. Y files/images/I am able to copy and paste the images that have been incorporated into the INDD file in AI of the INDD file? If this is not what type of image am I copy and paste? Can I take the images that I stuck in there and place them in a new INDD document and have the images to reproduce without problems?

    The images could be anything - check the links Panel.

    What you see (and copy) is just the screen preview, not the actual image data.

Maybe you are looking for

  • voice to text

    HI I have an iPad 2 with ios9.2.1 I use the voice to text in iBooks to listen to books read for me but the voices are very annoying. I can support new voices in the Australian male voice? If someone can tell me how to download would be great thank yo

  • Qosmio F60 - blue screen all in sleepmode

    Hello community, I have a problem with a Qosmio F60 - 10 L and Windows 7 family: 15 minutes after the passage in sleepmode, I get a blue screen andthe Qosmio restart the system. Do you know how I can fix this bug? Thanks for the reply! Joerg

  • HP PAVILION DV6-6B80EO

    I have a HP PAVILION DV6-6B80EO and you want to get an SSD instead of hard drive preinstalled. What type of SSD is suitable and is there any kind of limits what size I can use? Recommendations are much appreciated! Thanks in advance!

  • correction of the newspapers in the names of AutoCorrect

    Not sure if Safari or OS issues.  My ins sign for many apps is Marcon.  Since the last correct automatic upgrade OS he goes crazy even to my email address.  Cannot find the setting to fix it.  Running OS 10.11.2 and Safari

  • HP Photosmart Wireless B109n-z: my scanner has stopped working

    My printer and copier work ok but the scanner has stopped working and gives me an error message- "The analysis cannot because another program or computer using the HP netwoked imaging device. Try again later. The device is not on a network, and there