Event log of compensation after the reboot (storm)

Similar Questions

• I missed the path JDK8 for Mobile Application Framework (MAF) after the reboot of the JDeveloper... How can I fix this JDK8 path?

  Hello

  I missed the path JDK8 for Mobile Application Framework (MAF) after the reboot of the JDeveloper... How can I fix this JDK8 path?

  When you try and create a new application of MAF it will prompt you to insert the path JDK8.

• [SOLVED] stuck after the reboot: "vmkapei loaded successfully."

  Hello

  After a new installation of esxi 5.5 my system doesn't seem to work properly after the reboot of the host.

  When the installer has been done with data warehouses and other settings I wanted to passthrough my graphics card and so to reboot the host before you add the card to the host

  was necessary.

  The problem is now that esxi is loading/starting all systemfiles is just stucks "vmkapei loaded successfully" and restart manually doesn't seem to help either.

  Same problem on key usb and SSD

  I also used "formatwithmbr" to be able to install esxi.

  Specifications of the server;

  Mobo: Asus P9D WS

  CPU: Intel Xeon 1220v3

  RAM: Crucial DDR3 ECC 2x8GB (CT2KIT102472BD160B)

  GFX: Gigabyte Radeon R7 250 1 GB

  SSD: Samsung EVO basic 840-Series 250 GB SSD

  PSU: Shut up! E9 directly power 500W 80 + Gold

  If you don't have a GPU and do passthrough, you will lose the console after booting, which is completely hormaux and waited.

  If you want to keep the console, you have two options:

  1. install an another GPU.

  2. do not passthrough the GPU only.

  The ESX will work without a console, you just need to use SSH to do administrative tasks that you would normally do on the console.

  Linjo

• Red hat enterprise linux rhel 6.4 64 bit vm machine installation successful but after the reboot shows BLACK SCREEN

  I'm under vm workstation 10.0.1 on Windows 7 Ultimate 64 bit, I created a VMware machine in my computer using Media 6.4 RHEL, after all, installation has been completed successfully, The RHEL installation wizard suggested to restart, after restart, the virtual machine shows BLACK SCREEN WITH CURSOR of A in the upper left. FYI my system supports the "virtualization technology intel. Please help, if someone solved this issue. Thank you.

  Thanks for help.

  The problem has been resolved. As I said I was installing OS and then the problem comes after the reboot.

  I selected all the graphics software during the installation of linux. and it worked.

• Printer works only after the reboot or shutdown

  I use win xp sp3 computer. My only works only after the restart or shutdown. If I reinstall the printer driver, then it will work. I have reinstall win xp but similer happen again. I scanned my system with kaspersky. But no change. I need a permanent solution. Please help me...

  Hi Pierre,.

  1. what exactly happens when you try to use the printer?

  2. you receive messages or error codes?

  3. What is the brand and model of your printer?

  Method 1:

  You can try to start the fixit printer and check if it helps:

  Diagnose and automatically fix problems printing and printer

  Also see the article and check:

  Resources for the resolution of the printer in Windows XP problems

  Method 2:

  You can check the event viewer to learn more about the problem.

  Procedure to view and manage event logs in Event Viewer in Windows XP

• [noob] Help understand why the event listener continues even after the withdrawal.

  Hey again,

  I'll try to do my best to explain. I can get this to work properly, but I'd like to understand why what I did before was not working.

  I have a little trouble understanding why an event listener continues listening to even after that I delete it. I have a facility where a Parent MovieClip ("CampScene") is established and an event listener is added to the look for a function ("walkUpToCampfire") to see if a condition is true ("comingFromAx is true", that won't be true until later).

  If it is true, an animation plays, an event listener is added to see if the animation is made and if it's an event listener is added to listen for a click ("campScene.goToAx") to a new animation to play and other events. (It won't be true until later.)

  If this isn't true (which is the situation that I work with at the start), the event listener said listening for a click on "campScene.goToAx" is implemented immediately. The function following removes the event listener, so it is supposed to stop listening to a click and let an animation play throughout.

  The problem is a continuous click to be listened to and if you keep clicking on the reboot of animation every time, which is what I don't want to happen.

  --------------------------------------

  I'm able to resolve the problem by adding the line "campScene.removeEventListener (Event.ENTER_FRAME, walkUpToCampfire)"; or in mouseEnabled affecting false for "campScene.goToAx", but I try to understand what is happening.

  It is, even if I'm deleting the listener ("campScene.goToAx") in a function ("goToAxScene"), "campScene.addEventListener (Event.ENTER_FRAME, walkUpToCampfire)"; continues to wait for a mouse click, unless it is removed also?

  Again, I am trying to understand how it works.

  --------------------------------------

  This should be all ACEs. Of course, I would like to know if you need more information. (I can post the FLA / AS files if need be.)

  public void practice_adventure8() {}

  ...

  initial event listeners

  addEventListener (Event.ENTER_FRAME, CampScene);

  }

  public void CampScene(event:Event) {}
  
  remove the event listener
  removeEventListener (Event.ENTER_FRAME, CampScene);
  
  Add the first camp scene
  campScene.x = - 120;
  campScene.y = - 10;
  addChild (campScene);
  setChildIndex (campScene, 0);
  
  Add the event listener to see if guys works with camp fire or not
  campScene.addEventListener (Event.ENTER_FRAME, walkUpToCampfire);
  
  }

  IF RETURNING TO CAMPSCENE
  public void walkUpToCampfire(event:Event) {}
  
  If the guy is walking back to axe
  If (comingFromAx == true) {}

  event listeners
  campScene.guyAtCampScene.gotoAndPlay ("guyComingFromAx");
  campScene.addEventListener (Event.ENTER_FRAME, ifGuyDoneWalking);
  
  otherwise if initial creation
  } else {}
  
  remove the old event listener
  campScene.removeEventListener (Event.ENTER_FRAME, walkUpToCampfire);
  
  trace ("comingFromAx = false");
  event listeners
  campScene.addEventListener (Event.ENTER_FRAME, sceneHoverInfo);
  campScene.goToAx.addEventListener (MouseEvent.MOUSE_UP, goToAxScene);
  campScene.goToBridge.addEventListener (MouseEvent.MOUSE_UP, goToBridgeScene);
  }
  }

  IF RETURNING TO CAMPSCENE FACT
  public void ifGuyDoneWalking(event:Event) {}
  
  If the guy ended up in foot
  If (campScene.guyAtCampScene.currentLabel == "guyAtCampSceneNormal") {}
  
  reset the Boolean values of scene
  comingFromAx = false;
  
  Add event listeners
  campScene.addEventListener (Event.ENTER_FRAME, sceneHoverInfo);
  campScene.goToAx.addEventListener (MouseEvent.MOUSE_UP, goToAxScene);
  
  }
  }

  GET READY FOR THE NEW SCENE

  public void goToAxScene(event:MouseEvent) {}
  
  delete movement event listeners
  campScene.goToAx.removeEventListener (MouseEvent.MOUSE_UP, goToAxScene);

  
  stop all sounds
  SoundMixer.stopAll ();
  
  play the clip of guy walking to AxScene
  campScene.guyAtCampScene.gotoAndPlay ("guyGoingToAx");
  
  check the label to see if axScene must appear
  campScene.guyAtCampScene.addEventListener (Event.ENTER_FRAME, addScene);
  }
  

  Your best bet to solve why things happen is to make use of the trace function.  In this case, you may have a trace run every time this listener can addedand any time it is deleted.  In this way, you should be able to see if it was added in after he deleted.  If there are several places where it is added, then adjust your tracks to indicate which line is involved as well.

• Beginning of the Oracle E-Business Suite will not be after the reboot.

  Hello
  I installed Oracle E-Business Suite Version 12.1.1.9 with Oracle Database 1.1.0.7.0 OEL 5 update 5. Everything works perfectly after installing, I am able to connect to the database and log in the Web site at http:// < hostname >. < domainname >: 80nn.
  So, here's my problem, after I restart the server and try to log in the Web site I get this screen.
  
  
  500 internal Server Error
  
  Servlet error: an exception occurred. Current application deployment descriptors do not allow for the inclusion in this response. For more details, please see the application log.
  
  I know that many other people have got this question and I tried to debug for a while but no luck.
  
  Hussein says to run the service autoconfiguration on the application and database layer, but when I do this it completes with errors.
  I even tried to start the service of autoconfiguration on a newly installed Oracle EBS without rebooting it and the automatic configuration service always ends with errors.
  
  Also, I looked in the apache log files, I checked the error_log and it says file not found: favicon.ico. So, I added that file but the just error_log shows more errors but the site still does not work.
  
  Can I get a few more ways to solve this problem? Any help would be great.
  
  Thanks in advance guys.
  
  Published by: user10207680 on October 25, 2011 15:26

  If you could share your e-mail address or send me an email, we can work on that.

  Thank you
  Hussein

• Intermittently after the reboot, the option "Hide when minimized" in the Task Manager Win XP is too effective; the CPU usage icon does not appear in the notification area. Sometimes restart heals, sometimes not.

  The Options menu of the Windows Task Manager includes "hide when minimzed ', to display an icon in the area of notification, but not on the traskbar. I leave that option checked all the time to control the percentage of processor; but sometimes without apparent cause, after I reboot there is no icon in the area. Is there a way to fix this?

  Hello ronks,

  Thank you for visiting the Microsoft answers community.

  The reason for which the icon is not in the system tray is because the Task Manager is closed not minimized when you start your computer. To do this, you could do the following:

  -Go to my computer > C: > Windows > System32
  -Locate in Taskmgr
  -Create a shortcut > right click on the shortcut > click on cut
  -Navigate to my computer > C: > Documents and Settings > username (your username) > Start Menu > programs > startup
  -Paste in the startup folder

  -Right click on the shortcut > click Properties
  -Less run > pull down the menu and select Minimized > click OK > close window

  Now every time that you restart the Task Manager will be launched in a minimized state.

  Hope this helps Chris.H
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• EA6500 do not save IP/changes of classes there after the reboot

  Hello

  I'm trying to put up EA6500 with the latest firmware installed (1.1.28.147876). Under Local network - connectivity, I fixed router details (address IP/mask) and DHCP pool several times, you click on apply, received a message telling me how the router applies settings and this may take a few minutes. This is not fortunately, but after internal application of the network of these parameters has yet 192.168.1.0/24... It ends with a new random C class of the range 10.0.0.0/8. What the...?

  I suspect changes router internal IP range after each reboot of the device. This behavior may not be normal... but more I read about the EA6500... is not the router. -Suggestions, I actually do something wrong here?

  Oh - the EA6500 is configured to get internet via DHCP, it should get an IP address of 192.168.1.0/24 - modem works as a router also and there is no need of EA6500 make another PPPoE connection. As access to the network is concerned, it does not work. But I really don't like this changes to the internal network IP range...

  Because it appears that you are trying to cascade LAN-to-Wan, the router is detecting a conflict of IP address and changing automatically within the 10.x.x.x range. It's normal. The EA6500 trying to tell you that you have not configured it correctly. So he had to resort to setting up itself.

  If you want to change to the 192.168.x.x, then follow the instructions for editing cascading of a router linksys to another router below. Most of the people just change the local of the EA6500 to 192.168.2.1 IP address if they try LAN to Wan to a DSL modem/router in cascade. Change the DHCP of the EA6500 to 192.168.2.100 Beach - 149

  http://KB.Linksys.com/Linksys/UKP.aspx?pid=80&VW=1&articleid=3733

  If you want to use your EA6500 as your main router, then you have to put your DSL modem/router in bridge mode and then change the type of Internet connection on the ea6500 in PPPoE.

• Z3 compact 'No SIM card' sometimes happaned. After the reboot, it becomes normal

  Hello

  Recently, I have problem with my SIM with the Z3. Sometimes, it only says "no SIM" after using for a while. I can't call and no mobile network. After I rebooted, it becomes normal. I hope that's not the hardware problem. Could you give me some suggestions or solution?

  Thank you.

  I had a similar problem with a Samsung phone. Turns out it was the SIM that was defective from oxidation. You should try another SIM card for a few days to make sure. Generally to replace the card SIM is free, if you can you should so request a new one, especially if your signs of oxidation. If it is not the SIM card, then this is the contacts inside the phone.

• Cannot enter 'log-in' page after the upgrade of VISTA SP1 x 32 SP2 with failure code 0xc0190036 340/47122 (explorer.exe)

  I was "forced" to upgrade my computer to SP1 to SP2 when I tried to download the latest msn who.

  The upgrade part wasn't serious and VISTA asked me to restart my computer after the upgrade. Then I REBOOTED.

  The problem came when the final stages of the upgrade, which took part after reboot. It was somewhere near STADIUM 1/3 or 2/3 and then suddenly all blackened. I'm POSITIVEMENT SAFE that my computer is connected to the power supply (mine is a laptop). And then when I start to restart my computer (the second time), I got this message

  0xc0190036 340/47122 (explorer.exe)

  Then I restarted and I got to a page where windows told me that my computer is not able to be marketed with success because of the recent changes I made.

  I did an upgrade from the night before, where I update the OFFICE GENIOUS sthsth (sorry, but I forgot the name). I need to upgrade this thing in order to be able to upgrade to SP2 (complicated huh? lol)

  I tried to use the recovery thing and save the thing but WINDOWS insisted that I do not have a recovery... I would say is quite disappointing...

  COMPUTER:

  HP 2133 NetBook

  VISTA HOME BASIC run x 32

  I ' ve done some searching on the web but found nth related code 340/47122 and VISTA HOME BASIC x 32 and SP2...»

  The last method I want to use is the method of parameters factory reboot, restore... so here I am, ask help from experienced users. I don't have any DVD or CD ROM for the restart or what. any method that can safe me to restart my computer?

  Million thanks,

  momikoo :)

  Hello

  Method 1:

  I suggest you to check if you are able to start in safe mode or last known good configuration. Follow the steps mentioned below.

  a. restart the system and keep tapping F8 until you reach the start menu.

  b. Select secure known mode/last good configuration in the list and press ENTER.

  Method 2:

  I suggest you follow the steps mentioned in the link given below and let us know if your problem is solved.

  Error code on a black screen when you try to install a Service Pack in Windows Vista: "0xc0190036."

  http://support.Microsoft.com/kb/975430

   

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit ourMicrosoft answers feedback Forum and let us know what you think.

• Re-Setup does not continue after the reboot during installation

  I am trying to install windows vista on my laptop for a USB DRIVE.

  1. that I start my USB drive
  2. Enter the language settings
  3. choose clean install
  4. reformat my drive
  5. Windows Installer files & then restarts
  6. I get an error indicating that some vmsraid file is missing!

  SO I think that the boot manager not continues on the installation after restart! Why the hell vista needs to restart during the installation!

  PS > before starting the whole installation procedure, I got a similar error saying a file was missing

  and just for the knowledge base: vista worked FINE until I visited a site and got a paladin antivirus and then I tried a lot of things and I saw a startup folder and in it, there are AB, records etc. AC, which I think would have been absurd so I tried to delete the thembut they wouldn't, so I renamed the startup folder and ffff. and then from then on, I got an error after a reboot! so I decided to do a clean install of vista!

  Hello shez1983,

  Yes, if you have a 3 GB of RAM on your computer and 2 sticks. You can try to remove one of the RAM stick and check if the installation goes through.

  Thank you
  Irfan H, Engineer Support Microsoft Answers. Visit our Microsoft answers feedback Forum and let us know what you think.

• where the event logs are stored on the disk?

  Please see title.

  Forgive me, I gave you the wrong directory! Long day!

  Unless this has changed with Windows 8 (not sure), the correct directory of event logs is %SystemRoot%\System32\winevnt\Logs

  Kind regards

  Patrick

• ESXi host sees no data store after the reboot

  Hi all

  I'm new to the community and ESXi itself.  Everything has been working great until today when I rebooted my host.

  I installed it on a Dell T110 server, we had in the back for testing.  It has a 250 GB HARD drive installed in the case.  ESXi installed fine and I had 220 GB or more storage at my disposal.  Multiple VM installed, and once again, everything seems to work properly.

  Today, I wanted to activate usb passthrough for a Server 2008 VM I installed it, I went through the process and had to reboot the host at the end.

  After the restart, he seems to have forgotten the HARD disk that is installed and is no longer, I see my store data or virtual machine access I had running.

  There are a couple screenshots attachedthat screen what I see.

  Thanks for any help or advice!

  Is this the same controller that is attached to the 250 GB HARD drive? Passing the controller to the virtual computer may have unpresented it host, then you won't be able to access and to store configuration settings. Since this is a test system you can consider / try to run "Reset System Configuration" from the DCUI. If this does not work, you may need to reinstall ESXi of CD (the VMFS retaining of course data store).

  André

• OIM11g: Event Notification, before and after the data elements

  Hello
  
  I have several notification events currently working properly. I would, however, create a new event notification containing the front and after the a modified attribute value.
  
  For example: If the user's e-mail address changes, the notification should be similar to:
  
  It is a notification that your email address has been updated correctly in the system. Old value: [email protected] new value: [email protected]
  
  Notifications appear to not be pulled as handlers process events, process tasks and scheduled tasks, is it possible to have both the front and after the data sets available for notification of each of these tasks?
  
  Thank you.

  If it's on a field of the user object, you can check if the attribute you are looking at is contained in the orchestration.getParameters (). If it is found, you can remove the old value out of the following:

  HashMap eventDataHashMap = orchestration.getInterEventData ();
  Identity currentUserState = eventDataHashMap.get ("CURRENT_USER") (identity);

  Then you can generate the notification by email/but you want to.

  -Kevin