event minimized

Similar Questions

• Structure of the event can detect the minimized window

  Can the (LV 8.5.1) structure of event to detect when a window is being reduced?

  Yes, you can!

  The event 'Panel resize' is the raised event:

  

  Tone

• How can I configure Thunderbird to open in a minimized state when I boot?

  Mozilla Thunderbird opens is no longer in a minimized state. I've just updated to 31.0 V, running 64-bit Windows 7.
  Previously on booting, Thunderbird have flash in full screen and then reduce to let the current tasks and events, but now I have to minimize manually. I can't remember where the parameter is to reconfigure. Can you help me please?

  Yes, it is in the properties of the shortcut in your startup folder

• Can I drag the event target source drag?

  I have adds drag and drop features of a tree control on a VI at several targets of slipping on different VI.  For example, they can drag the tree for a XY Chart on another VI, a table to an another VI, a digital indicator on an another VI, etc...  In addition, when they abandon the data, I need to know where he left it down and initiate an action from the drag source (tree control) VI.

  My problem is, I see no way to determine what VI and control the move action took place the.  I'm basically looking to the control reference of the operation drag and drop target once the drop event occurs.

  I know that I should add a few cases of event for all the different targets, but I try to keep the minimal code and keep most of the complexity of the VI with the source.  If I have, I will use some sort of a global or the driving force to write an identifier of the target VI to a place where the source VI can be read, but I'd rather not do that in many places so I don't have to.

  Create your own event type user 'Control' and save it in the same diagram as source Tree. On the event of filter "Drag start?" of the source tree, inject this event Ref use in drag data (it will take be flattened). Then, in the 'Drop' unflatten handler this Ref user event and send event user with the value of the event data "Ref" of this event handler 'drop '. It is a form of a callback function, which is much more reliable than a global engine or action that exposes the risks of racing conditions.

• Problem with nested structures event

  Hello

  I'm rather new to Labview and I wanted to use a structure of nested in one of my programs at the event.

  However, I seem to fail to do things.

  I created a minimal example of construction that I use, you will find in the attachment.

  The idea behind this program is as follows.

  1. I have run the program and go into a while loop

  2. once I have hold down a button on front of a counter is increment every 100 ms.

  3. when I release the incrementing buttun stops.

  However, this does not work. What I am doing wrong?

  Thanks in advance!

  Never stack event structures. Never ever.

  That being said, your code contains a lot of illogical parts, for example a queue time when using a case of 0-timeout event.

  Please use a unique event structure. Where growth is expected to run, set the timeout case e .g. 100 (using the shift register) and once it is based again on set it back to-1. Initialize the shift with-1 register.

  Also avoid using references and nodes property to read/write the values. These are bad practices (in most cases) and bury a lot of run-time performance.

  A second shift register allows to keep the numerical value and increase the value in the case of timeout. Update of the terminal after the structure of the event.

  Norbert

  EDIT: My first line is a rule of thumb. With the increase in the skills of LV and appropriate design, the stacking of the structures of the event is possible, but you must know the rules. If this isn't the case, you won't fail hard.

• Judgment of the thermal event. Don't restart windows xp

  Dell Optiplex gx270s Small Desktop model, close. On restart, shutdown message was caused by a thermal event.
  I replaced the fan and the heatsink, but I still receive the message.  All the posts on the software side say it is a hardware problem, but I can't windows to restart.  It runs for about 10 seconds then stops.  Cannot reboot in safe mode either, computer crashes, loading... mup.sys loading line by line.

  How to restart?

  Hi Phil_DellGX270,

  Start your computer with a minimal set of basic devices as the mouse and keyboard and check if you can successfully start.

  Try disabling the sound card and video adapter network adapter etc. of Basic Input/Output system (BIOS) and check.

  Consult the manual or contact the manufacturer to do the same.

  NOTE: Changing the BIOS / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from configuration can resolved BIOS/CMOS settings. Changes to settings are at your own risk.

  Kind regards

  Divya R - Microsoft technical support.

• Calendar hangs on the edition of an event created in Google Calendar online with > notification 1 week

  I have a Z3 with the latest f/w but I got calendar crashing on me for a year now through different Z3 2 and it has just occurred to me what is the problem.

  When you create an event on the phone, the maximum time of reminder, that you can set is 1 week.  When you create an online event in Google calendar you can set reminders later than 1 week before.  If you create an online event with say a reminder of 2 weeks and then try and change the reminder in the app, the app will crash.

  Coup27 wrote:

  Uh, no?  This has nothing to do with Google and is likely to occur on any calendar that supports > notifications 1 week whether Google, Microsoft or other.  The app must be updated if it reflects the options of notification provided by schedules it supports with Google and Microsoft are probably the two main.

  Have you tried to disable the calendar of Sony and replaced by the standard Google calendar app?

  It is essentially the only way forward when there is a serious bug in an application of Sony. The interest to fix is minimal (see the responses on this thread). Instead of trying to reproduce the bug (it takes 1 minute to do), they ask you to try safe mode, reset your phone, the Voodoo dance around your phone, etc.

  I'm disabling apps Sony one because bugs are never corrected (but apps to get a lot of new intrusive permissions to "improve the experience")...

• Sudden BSoD. Kernel Power event 41 task 63. And other questions...

  While many may be called from a previous thread, I have made, my monitor that's happened wobbly with will power during the boot. I have not solved this issue, by the by, but think it's time for a new monitor.

  However, today when I went to go do something else while leaving the start the computer to the top, I came back and (while the screen was still ongoing and disable this monitor because), I noticed he had a BSoD. I couldn't read anything on this screen because of the screen, so I restarted the computer (what makes the monitor stop acting in place). Entered the event viewer and had found it to be an event 41 task 63. Whatever it may be. So that's what I see in the critical error XML view:

  -

  -

   

    41

    2

    1

    63

    0

    0 x 8000000000000002

   

    153812

   

   

    System

    Xenomic

   

   

  -

    0

    0 x 0

    0 x 0

    0 x 0

    0 x 0

    fake

    0

   

   

  I don't know what it means at all, but what I'm collecting, event 41 is related to the PSU? But if it is the power supply, what block of POWER of the MONITOR (which I guess would be the problem as the monitor was going to power he has) or power supply of the current COMPUTER (which I really hope is not the case)? Or is it something else entirely?

  In addition to all this, I noticed that everytime I start the computer and run Core Temp to check the temperature, I often find it starts at about 50-60 degrees and rest around there until some good long minutes (about 20-40 minutes) before it comes down to temperatures that are easier to manage (30-40 degrees). I guess that's just the Tower need ventilated, but that would be linked to the sudden BSoD on boot to the top?

  Hello

  Thanks for posting your query in Microsoft Community.

  The problem may be caused for various reasons and to diagnose the problem, we can try the following methods and check.

  Method 1: Start the computer Safe Mode and check if the problem persists. If the problem does not persist in safemode, turn on your computer in a clean boot state and check.

  Step 1: Start the computer in Safe Mode

  Safe mode is an option of troubleshooting for Windows that starts your computer in a limited State. Only basic files and drivers needed to run Windows are started. The words Safe Mode appear in the corners of your monitor to identify which Windows mode you are using.

  Please refer to: start your computer in safe mode

  Step 2: Perform a clean boot in order to avoid any conflict of third party software.

  To help resolve the error and other messages, you can start Windows by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  Place your system in the clean boot state helps determine if third-party applications or startup items are causing the problem. You must follow the steps in the article mentioned below to perform a clean boot.

  How to perform a clean boot in Windows

  Note: see 'How do I reset the computer to start normally after a boot minimum troubleshooting' to reset the computer starts normally after troubleshooting.

  Method 2: Please refer to the article below and try the advice given to solve the problem.

  Resolve stop (blue screen) error in Windows 7

  Hope this information is useful. Please feel free to answer in the case where you are facing in the future other problems with Windows.

• My PC keeps closing automatically. A screenshot of the event log is attached. Help, please.

  It is not a correct stop either because when I start the PC again it will appear "Windows is not stopped correctly.

  

  -Event Viewer information and warnings are generally not what worry.

  They happen when something is not what window is expected, as not to use the default settings.

  Error and criticism in particular, are looking for. Errors are not always serious either.

  EG - if a software hangs or is closed after be minimized instead of being shutdown properly

  you will get an error from this event. Repeated errors are more likely to require attention.

  No matter what stop down or restarting is not done via the Start button > Shut down options is not a

  "clean" shutdown  Windows saves changes/information system when stopping down and this

  can only happen when there is a 'random', or intentional farm via the buttons on the case or the power switch.

  As a precaution, I generally try and restart Windows again properly when there was an involuntary stop to allow Windows to do what he did when stopping down via start > stop.

  -Material flaws is a potential cause of accidental closing or random reboot.  Inadequate or faulty power supply, hard drive, motherboard are all candidates.

  -Software conflicts and malware can also cause the crash or lock-up, but a stop would be

  not be common with software problems.

  More details what is happening, as well as specifications of the system including

  Watts and the power supply brand can help.

  If ' there are files on download on OneDrive the crash dump.

  Instructions can be found in the article troubleshooting BSOD - here -.

  There is also a link to Speccy, which may also be useful. With Speccy, use the option publish snapshot and post the link here. Note that Speccy gives details on everything except food.

  .

• Application crashes, reproach to the observer of events "QdMp3Parser.ax".

  Hi all

  I'm trying (and failing) to run an application called "JanusVR", which is known to have issues and crashes if you have multiple audio devices activated, but I only have a permit. When I try to run the program, it jumps my mouse in the lower quadrant right of my screen and blocks then put the following in the event viewer:

  Error:

  The failing application name: janusvr.exe, version: 0.0.0.0, time stamp: 0x04096aa0 The failed module name: QdMp3Parser.ax, version: 1.0.0.0, time stamp: 0x2a425e19 Exception code: 0xc0000005 Offset: 0x00001ec0 ID of the process failed: 0 x 3730 Start time of application vulnerabilities: 0x01d017b45ef7a223 The failing application path: C:\Users\[Username]\Desktop\OCULUS\DEMOS\JanusVRNEW\JanusVR_Win32\janusvr.exe Path of the failing module: C:\Windows\QdAvPlug\QdMp3Parser.ax Report ID: 9e4bff70-83a7-11e4-a1e1-d4bed9fcc4da

  Information:

  Fault bucket 716429253, type 17 Event name: APPCRASH Answer: No available Cabin ID: 0 Signature of the problem: P1: janusvr.exe P2: 0.0.0.0

  Once and only once, she appeared with this dialogue:

  The instruction at 0x006e79f8 referenced memory at 0xffffffff. The memory could not be read.

  I spoke at length with the dev of the program and we are both rather puzzled. Event Viewer points rather openly to "QdMp3Parser.ax", but all searches for more information on this module lead us only to standard DLL file "hotfix download" scam sites.

  Anyone know what this module is and how to fix it?

  Thank you!

  Hello

  Sorry for the delay in response.

  You can put your system to boot and try to run JanusVR. Check if this is useful.

  To help resolve the error and other messages, you can start Windows Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts. This article describes how to solve problems in Windows Vista or Windows 7 by performing a clean boot.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 of the above article.

  Let us know the status of the issue.

• Minimize the application event.

  Hello dear developers.

  As up to now, I have another question regarding application development.

  When I drag to minimize application and tap it to restore full screen - events that are accountable? I can't find...

  BlackBerry Tablet OS 1.0.7, that was released this morning of 19 July 2011, there are ways to determine relieably the State of the application or window is.

  There are 2 States of different applications

  1 assets

  2. turn off

  Applications window has 3 States

  1. full screen

  2 miniature

  3 hidden

  It is important to understand that the query shows don't get maps not always directly to the window of its States.

  This is the race to the bottom of what the average window States.

  Normal

  Your application window is full screen on the device and is active.

  Vignette

  Your application window has been thumbnailed. That would happen if the user crept upward from the bottom to reduce the application or we slide left and right to switch between applications.

  Hidden

  Your application window is not visible on the screen at all. This usually means that there is another application that is full screen.

  Here's what the code looks like that will allow you to listen to different State on a window changes.

  
          var win:IowWindow = IowWindow.getAirWindow();
          win.addEventListener(IowWindowEvent.WINDOW_STATE_CHANGED, stateChanged );
  
          function stateChanged(event:IowWindowEvent):void
          {
              switch( win.state )
              {
                  case IowWindowState.NORMAL:
                      trace( "app is full screen" );
                      break;
                  case IowWindowState.THUMBNAIL:
                      trace( "app is minimized" );
                      break;
                  case IowWindowState.HIDDEN:
                      trace( "app is hidden" );
                      break;
              }
          }
  

  2 important things to note.

  1 this update does not require an SDK Update and works in 1.0.7.

  2. it works through window in an application and your main window and the window on the screen HDMI aura of States, if you're not in mirror mode.

  Hope this helps

• Are there events for bezel 'SWIPE_UP' 'SWIPE_RIGHT' and 'SWIPE_LEFT '?

  So, I make a game that pits two living players against each other to quickly solve a puzzle of screen on. Each turn is timed, but each player receives a pause button. When the game is paused, the screen is covered so that players cannot cheat the timer.

  I also have a feature that penalizes a player making a pause the game (by reducing the maximum points available), but the problem is that if use you native scanning of the Playbook movements, it will freeze the app and stop the stopwatch, which is fine, but it bypasses my pause feature and leaves with the puzzle there on the screen.

  What I'm looking for is a trigger event, like the current "QNXApplicationEvent.SWIPE_DOWN" but for others, shots of native bezel. I need to replace the native behavior (as you can do with little AIR for Android physical buttons), but I just want to add a specific function to the application to go with the native behavior

  I am aware that I will probably to rely on some version of the honor for some, this system, but it is really annoying that I can't cover at least to the top of the screen when the application is placed in the background. It makes all the games of this type, or style games 'Brain Age', cannot conceive properly.

  Anyone know if these event triggers exist and I have not found just not them? Most applications will not need them, but, especially for games, I find it shocking, if it is not possible to run a few lines of code enforcement on these events call bezel.

  Thank you!

  Hey,.

  I'm not entirely sure what you're looking for but im going to take it. IM assuming you are trying to find out if an app was minimized and sent in the background? If Yes, there is an event you can listen. Although two events. the first event is the Event.DEACTIVATE. This event is sent when your application is reduced and sent in the background. so his return when a user slides up (and sliding sideways, assuming that also reviewed a minimization). the other event is the Event.ACTIVATE This event is sent when your application is full screen again and the application of over the top of the page.

  so in your main application, you should have these lines:

  this.addEventListener(Event.DEACTIVATE, onDeactivate);
  
  this.addEventListener(Event.ACTIVATE, onActivate);
  
  (...)
  
  public function onActivate(e:Event):void
  {
      //show screen
  
  }
  
  public function onDeactivate(e:Event):void
  {
      //hide screen
  
  }
  

  hope that helps. Good luck!

• Possibility to change the rollover button via events State?

  I have a small AIR application, I wrote that basically allows instructors open vehicle different sovereign control panel, set the positions of the controls on the Panel and then take screenshots for their educational materials. Since some of the panels receive enough complex, I thought it would be nice to have a function such that they could see where all of the invisible buttons are for all controls on a Panel.

  My first thought was to just put all the buttons to their rollover State, but that went nowhere part quickly (they aren't MovieClips, they are SimpleButtons), so my next thought was to send somehow a turning event to each button to force it to the rollover State. But I can't seem to get anywhere with anyone...

  If I do:

       btnDn.dispatchEvent( new Event(MouseEvent.MOUSE_OVER) );
  

  nothing notable happens.

  Does anyone have pointers on this? I'm looking for something stupid and impossible?

  I have a DIY class where I simply swap the upState and exaggerate buttons, but it feels ridiculous overkill for something that seems like it should be so simple...

  Thanks in advance,

  Eric.

  a temporary variable is necessary.  If you want to optimize this code so there's minimal work for the flash player, use:

  var tempState:DisplayObject;

  function swapUpOverF(btn:SimpleButton):void {}

  tempState = btn.upState;

  btn.upState = btn.overState;

  btn.overState = tempState;

  }

• Helps the event Felx.IDEL

  Hi people,

  I am a beginner in Flex and I used an example on Flex.IDLE event of
  http://inflagrantedelicto.memoryspiral. ... nt-page 1.
  to log out a user after a specific interval inactive.

  What happens with me is

  1. when the window is minimized, this event does not occur.
  2. when some flash content are run in the same or different, browser event fires sometimes and sometimes not.

  Can someone help me to understand why this is happening and how I can solve this problem. Please help me.

  Thanks in advance.
  Kind regards

  When you add the linstener of the IDLE event?

  I did an experiment: If you put the code "systemManger.addEventLinster(FlexEvent.IDLE,handler)" after the addToStage event has been sent in application, which works well

• How to invite people to an event calendar with the new iOS 10?

  Before I updated to iOS of 10, I was able to create a calendar event with the apple iPhone built-in calendar and there is an option to 'invite' contacts him so they could add to their calendar. I can't find this option now after the new update. Where and how can I do this?

  Invite others to an event. You can invite people to an event, even if you're not the one who, on demand with Exchange and some other servers. Press an event, press on modify, then on the guests. Type the names, or tap to select the people to contact. If you don't want to be notified when someone refuses a meeting, go to settings > calendar, then disable view guest declines.