Event Viewer Windows 7 'Administrative events' can not clear the log? Why and is there a solution?

Window 7 has many error logs in the "Event Viewer", but all seem to have the ability to "Clear log" except the Administration? Why? I looked at some of the entries, and they you are referencing my "security cameras" this automatic restart after a power/Brown power. Yet I have not found a way to "clear a log this ' under 'Administrative events?' Is there a way to clean this newspaper? It's more than 1100 events, and none are major.

Thank you

Hank

Hank

Delete all log files, including the journal of the administrator combined, by running this command as an administrator file save it to the desktop and right click to run it. The link is here http://www.sevenforums.com/tutorials/25480-event-viewer-one-click-clear.html?ltr=E

Tags: Windows

Similar Questions

  • BlackBerry smartphones, I can't clear the log of events completely! Bold 9900

    I don't know why, but I just can't clear the log of events completely. I always stayed with two newspapers which cannot be erased. The two newspapers said: error and mistake. It's only affect the phone, but it's pretty disturbing with two newspapers cannot clear. I had tried to pull battery, resets and it can always be removed. Help, please.! My phone is the Bold 9900. Carrier is Singtel. Operating system to 7.1.0. HELP PLEASE! Thank you!

    Nope.

  • I am trying to install Windows 7, but he does not see the disk partitions and the installation goes to the screen "select the driver to install."

    Device drivers for a Win 7 install on Ubuntu system

    Hello

    I bought a Toshiba Portege M400-S5032 tablet PC reburbished that came with Ubuntu installed.  I am trying to install Windows 7, but he does not see the disk partitions and the installation goes to the screen 'Select the driver to install' with no option. Because it is not find Windows device drivers, I went to the Toshiba site to see if I could download a full game, but I can not...  So, how do you get drivers for Windows can install (or y at - it another way to work around it)?

    Thank you!

    The bios on fail safe defaults options are?

    It will probably take the raid driver

  • I have Firefox 8.0.1 and since the update to it, some sites, I need to go so that Firefox will not accept certificates which is accepted in the previous version. I can not get the permanent exception and must uncheck permanent and do every time.

    I have Firefox 8.0.1 and since the update to it, some sites, I need to go so that Firefox will not accept certificates which is accepted in the previous version. I can not get the permanent exception and must uncheck permanent

    You can use this button to go to the Firefox profile folder:

    • Help > troubleshooting information > profile directory: opens showing the file

    It is not usually necessary to create an exception for the certificates.

    Possible causes are that a server does not send the full (intermediate) certificate chain or self signed certificates.

  • Can not configure the Ralink dongle and I am referred to in article 871122 on the Microsoft site to activate zero wireless connections.

    I want to use a USB device to connect to the Internet, as my ethernet card is US I can not configure the Ralink dongle and I am referred to in article 871122 on the Microsoft site to activate zero wireless connections.  How to do this please?

    USB to the Internet connection.

    Hello

    It seems that your dongle is not installed properly. try to uninstall and reinstall the software dongle...

  • Structure of the event does not clear the queue after his release from the Subvi

    OK I'm not sure if this is a stupid question or not...

    I was trying just a few tips and stumbeled on this problem...

    So I created a sample (not exactly)

    In qqq_Main.vi just press PressMe

    (it opens a Subvi qqq.vi)

    There are two buttons to stop "Alt1" and "pylone2".

    To close the Sub - VI press either on "pylone2".

    or press "Alt1", then "pylone2".

    with the latter method of the value of closing change pylone2 is registered outside the while loop and after the closure of the Subvi should not it be erased? (Or should manually clear us it?)

    For this reason not clear, the second time I press 'PressMe' change the value of pylone2 even goes off before you press anything

    I can't look at your code at the moment, but according to your description, it seems that the system works as expected. I guess you do a completely static record of events (open the event configuration dialog box and select the controls and event).

    The first thing to clarify is your use of the term "registered". In this case, it's a problem, because the registration in the context of the protests means asking to receive the event when it happens.

    Now that you know it's important to understand where the recording is happening, because that's what determines which events are stored in the queue. When you use this type of static record, registration happens from the VI the event structure is in run mode (Note: this does not mean that the VI is actually running, but just that it's the of running or reserved for the race) and the cancellation of registration only happens when the VI mode of execution. Who is right for which you get the events in the queue of the previous run of the VI - the VI is still in run mode, then the event is added to the queue and still waiting in the queue until the structure of the event to run again.

    You can work around something like that by switching to dynamic registration of events, where you can unsubscribe to empty the queue at the end of the VI, but requires more code. Also, in 2013 LV there are a few features added to events that could allow to do this statically (I don't study all the additions, so I don't know if this is possible for static recording).

    There is a good presentation on the events of NIWeek 2013 by Jack Dunaway. You can find details of how to download the video here - http://lavag.org/topic/16091-ni-week-2012-videos/

  • Windows 7, freshly installed, can not load the drivers, no usb, no cd player, no internet

    Hey guys,.

    I just installed Windows 7 64 bit on Windows 7 - laptop OS, but did not not any possibility of installing drivers. USB 2.0 does not respond, ethernet cable - no drivers. How can I possibly have to load drivers for the laptop computer?

    I'll try to find a solution, but nothing, only the similar problem was to change in the BIOS USB 3.0 2.0, but I have no idea how do in Insydeh20 bios.

    Hello

    If I understand you correctly, you have installed Windows 7 on your computer, but can not load the drivers that you don't have drivers CD. In addition to this, you can not connect to the internet through an Ethernet cable. In this scenario, we can only do two things to solve the problem.

    1. try to contact your computer manufacturer and ask the driver CD after mentioning your model number. You can also visit one of the shop of the manufacturer of your computer and ask the drivers CD and see if they can help.

    2. you can download the .exe file from the site of the constructor on any of the advertising of work computer and then install it on your computer using CD/DVD/USB.

    Hope I could answer your query. Feel free to post on the forum, if you have concerns more associated with Windows. We will be happy to help you.

    Kind regards

  • my task manager on windows vista family premium does not show the tabs before and used to work properly.

    my task manager on windows vista family premium does not show the tabs it used to, when I used to open the Task Manager it would be things like 'process' 'services' 'preformance' ect. in the tabs. but now when I open it it shows just a window that has two columns, one labeled task, and other labeled status. It shows what im running, but there any options at all as the winger treat ect. the window is not even an exit or minimize the icon as other windows are in the upper right. the only way to close it alt f4 do - what I do? Ive already tried to restart the computer, and I'm on the only account to administer it. I have a screenshot of the new manager of task here: http://i1119.photobucket.com/albums/k621/a_bakedpotato/vistataskmanagerisue.jpg

    Looks like you may have a virus or other malware. Get your updated antivirus program and boot into Safe Mode. Note that some viruses can hide from your normal antivirus program, so you really need to scan in Safe Mode. To enter in Safe Mode when you turn on first, press F8 on every seconds until you get the menu, and then select Safe Mode. Then run a complete system scan.

    Microsoft has suggestions and offerings to

    http://Windows.Microsoft.com/en-us/Windows7/how-do-I-remove-a-computer-virus

    Moderator Forum Keith has a few suggestions along this line to

    http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-performance/Windows-Explorer-has-stopped-working/6ab02526-5071-4DCC-895F-d90202bad8b3

    If that suits him fine. If this is not the case, use system restore to go back to an earlier date at the beginning of the problem. To run system restore, click Start-> programs-> Accessories-> System Tools-> system restore. Click on the box that says show more restore points.

    You can check the corrupted system files. Open an administrator command prompt and run SFC if the above does not help. Click START, and then type sfc in the search box, right-click to SFC. EXE and click run as administrator. Then, from the command prompt type sfc/scannow.

    Finally if all else fails, you can look at the rather cryptic system event log. To make, click Start-> Control Panel-> administration-> event viewer tools. Once in Event Viewer system log-click and scroll entries looking for these "error" with indicator see if you can find guidance on where the problem may be.

    `

    I hope this helps. Good luck.

  • Satellite Pro A100-622 can not read the card SD and Memory Stick with Windows Explorer

    I have a Satellite Pro A100-622 running MS Vista Home Basic Edition. I tried to use the card reader integrated with SD and Memory Stick card but cannot view the contents using Windows Explorer.

    In both cases, the laptop recognizes the card and try to install new hardware. Unable to do so, he asks the drive of the software provided with the cards. Any software not provided with a card and I cannot find drivers to make the drive work.

    The only application that I can find on the laptop that is associated with the player is a module of SD formatting, but I don't want to format the card (s) I want to just read the current content of them and add files.

    Any ideas?

    Hello

    You can download the drivers (and especially in your case for the sd-card-reader) here:

    http://PC-support.Toshiba-Europe.com/Vista/

    and here

    http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp

    So the other point is the service of the SD card must be enabled in the start menu-> Control Panel (change to Classic view)-> Administration-> Services-> Chip card (at this point, you must activate the service and configure it to start at windows startup).

    If you have any other questions, just ask. ;)

    Good bye

  • Windows XP Firefox browser, can not download the SMA

    Hello:

    I have three machines running xp, latest version of firefox, I already deleted the previous version of Flash, attempted to remove the SMA, repeat myself that I have to close IE to do this, but IE is not running.  When I go to the adobe site and try to download flash player, ADM window comes at all, instead he said: I need to install the missing plugin I've ever heard.  Help

    Hi, when you refer to the ADM are you speaking of the DLM (Download Manager)? If, so do not use it. Rather go to this Troubleshooting Guide and make sure you have all the settings correct IE. Also, make sure the permissions section you need to use the administrator account. Then after uninstallation, use the manual installation programs. Don't forget to Reboot (restart) your computer after uninstallation and installation.

    http://kb2.Adobe.com/CPS/191/tn_19166.html

    Once you have done that the settings are correct, then you can SAVE the uninstaller to your desktop.

    Download and SAVE the manual installer on your desktop.

    Make sure that you disable all applications that use Flash (see the system tray area near the clock), such as MSN messenger or any other person.

    CLOSE all browsers, and then rerun the uninstaller, restart and then restart.

    Then, run the setup of IE, FF Installer(if you use it, if not don't even put it on your Desktop) and then restart.

    Go to this site to test: http://www.adobe.com/software/flash/about/ 

    If you have any questions, just after.

    Thank you

    eidnolb

  • The installation of Zoo Tycoon 2 in Windows 7, now I can not install the expansion packs.

    Thanks to the person here who has posted the trick to set virtual memory to 2048, I got edition of Zoo Tycoon 2 guards running. Now that I'm trying to add expansion packs, I get the message that I did not install Zoo Tycoon first, and that I need to install it. What?

    Before using the virtual memory fix, I found here, I tried to run in XP mode, using the also found instructions here. I wonder if this is the reason why I get the error message, and if so, should I uninstall and reinstall without changing the compatibility mode?

    Running Windows 7 Professional 64-bit. I solved my problem by uninstalling Zookeeper Collection, replace and reset maximum memory of 2048.

    Once I thought I had installed as an administrator or as the account of my children, I have had no problem by uninstalling Zookeepers Collection and put it back. Install the expansion packs was easy after that.

    I'm going to bookmark the Zoo Tycoon Support site for later use. Thank you.

  • Service Pack 2 could not install, windows can not access the service install and slow computer

    Please help, I'm using Vista Home Premium 32-bit. I'm not very technical, and I think that my problems began some time ago when Vista Service Pack 2 Installation causing boot failure has failed and that I could not connect. I tried a fix by using the Startup Repair and was able to connect again, but now all my Vista updates since then do not install and now my computer is running extremely slow, constantly trolling.  I also have problems "windows service install could not have access. I have tried to reinstall Windows Installer 4.5 but says "update does not apply to my system. I also tried to unregister and re-register Windows install that does not work. When I try to 'upgrade' my installation disc vista, the option is not available. I think my computer is confused if it running SP1 or SP2. Also I can not install programs because of the installer, the service to publish a work around if needed. Thank you

    What application or antivirus security suite is installed and your current subscription?  What anti-spyware (other than Defender) applications?  What third-party firewall (if applicable)?  Who were these applications that run in the background when you tried to install SP2?

    A (another) Norton or McAfee application has already been installed on the computer (for example, a free trial version which is preinstalled when you bought it)?

    Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support, initially planned to end on November 26, 2009, has been extended until February 26, 2010. Availability of support chat or messaging differs depending on your location. Some questions may require that more support for which he is advanced a charge.  Go to http://support.microsoft.com/oas/default.aspx?prid=13014&gprid=582034 & select appropriate category (i.e., download problem;) Installation problem; Problems after installing a service pack).

    ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

  • Windows 7 32 bit can not find the driver for printer Photosmart Premium C310a

    I recently had an update to the product directly on my printer Photosmart Premium C310a on Internet.  However, this then to Windows 7 (32 bit) to search for a driver for the printer but it could not find a.  If I click on devices and printers, it shows my device from the computer as requiring troubleshooting.  When I click on troubleshooting it signals that "Driver for Photosmart Prem 310 is not installed.  Install the latest version of the driver.  When I applied the fix, it indicates that the driver is not found.

    I tried to download the latest driver on the website of HP in various ways, finally to uninstall all HP software displayed in the Panel and then removing all the HP files remaining on my laptop.  I then ran PC Tools Registry Mechanic, disabled my anti-virus, restarted the computer software and reinstalled the complete C310a software on the HP site.  It ended without any problem, and after adding the printer to my list of printer, it is printed on a perfect test page.  However, Device Manager always reports the C310a driver is missing, but it cannot find a copy when it finds one.

    How can I convince the device manager that everything is going well (apparently)?

    apeace, I recommend you do as you did, uninstall the printer under programs and features but also by ensuring that this printer he is removed from the Manager of peripherals and devices and printers. Then after restarting the computer and by disabling the firewall, download the drivers and software for full adjustment and install them.

    You can also run this utility and see if that solves the problem automatically!

    http://goo.GL/u3jDE

    Let me know!

  • Why my windows phone says he can not download the file type when you try to install the firefox browser?

    I have no restrictions on the phone. I tried to be sure and use the features of security as... Safe search, cookie and other block. He repeated, however, unable to download the file type when I try and install one of the browsers to date. What is interesting to say the least. Because my browser already uses the version more up-to-date. I have internet explore using a nokia windows 8

    Hello, the mobile version of firefox is not available on the windows phone platform: Firefox work on my mobile?

    There was technical and legal obstacles in the app store initially that discouraged mozilla to start any developments in this direction. I do not know the current situation, but given that mozilla is now focusing its efforts on the creation of firefox os as a platform open source web-based, I doubt you'll see firefox on your windows phone device in the foreseeable future...

  • Icons of Windows/folder/images virgins; can not change the background in the image.

    Thus,.

    I don't know what happened, but I had somehow the virus/trojan thingy goingonearth.com... I don't even know if it has nothing to do with my problem. I know that since discover and try to remove the virus/trojan said, I experienced a few problems:
    1. my file & image icons (tiles) were literally emptied in large mode. But there is NO icon file (photo). The text/image folder is still there. The REAL folder icon shows when using small icons, but if I switch to large icons, it extends a smaller and makes VERY pixelated (sp?) (photo). In any case, I have inserted screen captures.

    2. When you delete a file, I noticed the associated picture icon is black (photo).

    3. I can't change my desktop image using the photos, I can however change the solid color black color I want OR I can use a canvas photo and set it as my desktop. The icons below the screen background images is empty as well (photo).

    I can assure you that I unchecked the "always show icons, never thumbnails" option in the Folder Options under control panel (photo).

    ANY help would be appreciated, it drives me crazy.

    Thank you
    Cuzimjustmeh

    I never found a solution to this problem. I've just upgraded from Vista to Windows 8 and everything is fixed. Clearly.

    JustMeh

Maybe you are looking for

  • Satellite T130 - FN + F * does not work

    Help me! I have a Satellte T130, yesterday I run unknown software, and after the BIOS has been changed. Now FN + F * funtion may not work, so I can't use projector. I've already run the version of the bios 20100531110112 BIOS update but it still does

  • A verified email address is required to connect to iMessage

    I just restored my iPad from a backup to iCloud and now my iMessage cannot connect.  I try to connect and get an error message saying "a verified email address is required to connect to iMessage.  I used my email address for iMessage and FaceTime for

  • my girlfriends account hacker

    Hi, my girlfriends account hacked and had to use this service through mine. Also, the person who hacked his account changed the password and made sure that any new password is sent to a yahoo account. the person also sent to all his contacts saying t

  • Vista - Error Code: 800f0828 (cannot install updates)

    Original title: update issues Installed a second windows vista after all attempts to repair the previous installation failed.  Second installation went to the end and have been invited for the updates.  18 went down to the end but service pack 2 fail

  • Error 0 x 80070570 when you access my flash drive with media player

    bought a flashdrive down loaded a film on my drive hard freesat and tried to play on windows media player but keep getting error code80070570 saying file is damaged or illegible, ideas. Original title: drive flas