Everyone has a problem with the Windows Explorer permanently closing?

Similar Questions

• Anyone know if there is a problem with the "Windows Update" site? Since May 11, 2010...

  Anyone know if there is a problem with the "Windows Update" site? As of May 11, 2010 I could not access it for 2 days now.  I get an error report indicating that he has a "problem with the site '... Not sure if it's my computer or the site itself. I just need to check updates and download them. I would be grateful for any feedback...  Thank you!
  ~ Jenifer

  It is without a doubt.  There were a few patches published today, and I was able to update all my machines successfully.  This looks more like a virus problem.  Have you run a virus scan recently?  Many times, if you are infected the virus will prevent you to access Windows Update.

  You can also use Microsoft Fix It to reset the Windows Update components: http://support.microsoft.com/kb/971058.  This could also be your problem.

  Let me know how it goes,

  Barbara

• Message 'there is a problem with the Windows Installer package

  I have Vista 64-bit Service pack 2

  On my computer HP ProtectSmart Hard Drive Protection has stopped working... .it shows such as the disabled and 'activate' is grey.

  I went to HP to download the new version.  It downloaded, but then to install I got the following message:

  "There is a problem with the Windows Installer Package.  A program run as part of the Setup did not finish as expected.  Contact your supplier of staff or the package of support ".

  How can I fix?

  Please help pleas...

  Thank you

  "C:\Windows\system32\msiexec.exe'-I 'C:\Users\David Candy\AppData\Local\Temp\IPDT_Install.msi '.

  Is the command line to install a particular product. Use the Task Manager to find your command line.

  Then change to add logging.

  "C:\Windows\system32\msiexec.exe" - working '% userprofile%\desktop\install.log'-I 'C:\Users\David Candy\AppData\Local\Temp\IPDT_Install.msi '.

  FixIt

  Microsoft has a range of automatic programs to solve common problems. To see Windows Installer problems

  http://support.Microsoft.com/mats/Program_Install_and_Uninstall/en-us

  For the visit of the list the most comprehensive

  http://support.Microsoft.com/FixIt/en-us

  When you choose to download, choose the option to run on another computer. You can then save it to a folder on your hard drive. Open the folder, open the folder fix this laptop and run Run Fix It. It will contain all 27 FixIt.

  
  --

• Problems with the Windows and Windows Update problem of Installation of KB2416472 component.

  Original title: I use SFC. EXE

  Error detected

  How can I fix this, or I have to re - install window again.

  CSI 0000015a [SR] cannot repair the military record [l:24 {12}] "settings.ini" Microsoft-Windows-Sidebar, Version = 6.0.6002.18005, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral to the public key in the store, hash mismatch "

  The same with 0000015c detail above.

  00000309 [SR] cannot repair the military record [l:24 {12}] "settings.ini" Microsoft-Windows-Sidebar, Version = 6.0.6002.18005, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral to the public key in the store, hash mismatch "
  2010-10-08 12:35:51, CSI Info 0000030b [SR] cannot repair the military record [l:24 {12}] "settings.ini" Microsoft-Windows-Sidebar, Version = 6.0.6002.18005, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral to the public key in the store, hash mismatch "
  2010-10-08 12:35:51, CSI Info 0000030 c [SR] this element is referenced by [l:158 {79}] "' Package_16_for_KB948465 ~ 31bf3856ad364e35 ~ x 86 ~ ~ 6.0.1.18005.948465 - 49_neutral_GDR" "

  00000367 [SR] cannot repair the military record [l:24 {12}] "settings.ini" Microsoft-Windows-Sidebar, Version = 6.0.6002.18005, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral to the public key in the store, hash mismatch "
  2010-10-08 12:38:13, Info CSI 00000369 [SR] cannot repair the military record [l:24 {12}] "settings.ini" Microsoft-Windows-Sidebar, Version = 6.0.6002.18005, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral to the public key in the store, hash mismatch "
  2010-10-08 12:38:13, CSI Info 0000036 [SR] a the item is referenced by [l:158 {79}] "' Package_16_for_KB948465 ~ 31bf3856ad364e35 ~ x 86 ~ ~ 6.0.1.18005.948465 - 49_neutral_GDR" "
  2010-10-08 12:38:13, CSI Info 0000036 c [SR] full repair

  Having a problem with the Update window for

  Update of security for Microsoft .NET Framework 4 on Windows XP, Windows Server 2003, Windows Vista, Windows 7, Windows Server 2008 x 86 (KB2416472)

  I followed the recommendation, that nothing has changed.

  Download size: 4.7 MB

  You may have to restart your computer for this update is taken into account.

  Update type: Important

  A security issue has been identified that could allow a malicious user to compromise your Windows system that is running the Microsoft .NET Framework and gain access to information. You can protect your computer by installing this update from Microsoft. After you install this item, you may have to restart your computer.

  Thank you

  Hello

  Problems with the Windows Sidebar?

  It seems that the problem is related to the Windows Sidebar. Remove all third-party sidebar gadgets if

  Follow these steps and check if it helps.

  Logon as administrator-

  a. If the sidebar is running - make a right click on the sidebar near the lower clock icon right in and out

  b. Click Start - Type "CMD" in the search box - find top - right click it and run as administrator.

  c. replace C:\Program Files\Windows Sidebar by copying and pasting this command->

  CD C:\Program Files\Windows Sidebar
   
  d. press enter (this is assuming that your sidebar is on C:, otherwise use the letter of the drive is on)

  Guest should be--> C:\Program Files\Windows Sidebar >

  e. then copy and paste each of them following their tour to enter

  regsvr32-u sbdrop.dll

  regsvr32-u wlsrvc.dll

  regsvr32 atl.dll

  regsvr32 sbdrop.dll

  regsvr32 wlsrvc.dll

  Sidebar should now work.

  Also if you scan SFC does not fix a corrupted system file, you can follow the steps from the link below.

  Look under "'If the System File Checker tool can not repair a file, proceed as follows :" "

  As with regard to the installation of KB2416472, to install this hotfix, you must have Windows Installer 3.1 or a later version installed on the computer. To get the latest version of Windows Installer, see the following Microsoft Web site.

  Windows install 4.5 Redistributable
  For maore information, see: http://support.microsoft.com/kb/2416472

  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• Problems with the windows troubleshooting utility. Error code: 0 x 80070002

  Original title:

  Problems with the windows troubleshooting tool

  Whenever I run the Troubleshooting Guide for things like a problem of wireless network I get this error

  An error occurred during troubleshooting:
  An unexpected error has occurred. The Troubleshooting Wizard can not continue.
  Identifier of the package: PeformanceDiagnostic
  Path: No Local package
  Error code: 0 x 80070002
  Source: engine
  User: SCOTTSLAPTOP\Scott
  Background: high

  Hello

  1. the problem occurs with all the troubleshooters you trying to run?
  2. why you try to run the troubleshooter?

  3. Since when are you facing this problem?

  Note:
  You can back up data to an external hard drive and no CD. It is essential to back up data even if you do an inplace upgrade.

  You can try to do an inplace upgrade and check if this gives a probable solution.
  Check the following link to see how to perform an inplace upgrade.
  http://support.Microsoft.com/kb/2255099

  I hope this helps.

• Hello! Someone has some problem with the haptic on Macbook 12 "2016 function? It does not work on my Mackbook.

  I'm trying to figure if someone has my problem with the haptic on Macbook 12 "2016 function. The option is checked in the preferences system, but it does not work.

  Thank you

  Hello luigi10m,

  Thanks for posting on the Community Support from Apple. From your post, it looks like your haptic feedback does not work when you click using your trackpad and the setting is enabled. I know that this is a great feature and it is important to make it work. I'll be happy to help you.

  First of all, I would like to assure you that in system preferences > Trackpad > clicking silencer is not checked, that might help. In addition, it would be useful to reset the settings of the SCM. You can find instructions here: reset the management system (SCM) controller on your Mac - Apple Support

  I'll also include those for you here:

  1. Stop the Mac.
  2. Plug the MagSafe or USB - C adapter to a power source and to your Mac.
  3. Use the built-in keyboard, press shift-control-Option on the left side of the keyboard, then press the power button at the same time.
  4. All the keys to unlock, then press the power button to turn on your Mac

  Take care!

• Have a problem with the Windows XP where he did not finish the boot.

  Have a problem with the Windows XP where he did not finish the boot. Ran remote console and @ the c: > guest tried to run chkdsk/r/p and received the error message "invaild drive. I put the drive in the argument?

  Hello Tmagic,

  Thank you for your message.  The correct format is below:
  chkdsk volume: (switches, e.g./r/p)
  
  
  example: chkdsk c: /r /p
  
  
  If these results find but cannot fix all the mistakes, you can also check with the manufacturer of your drive and possibly download a utility that will check the errors and repairs.
  Please let us know if it did or did not help to solve your problem.
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• The place most frequent that I need to connect to a BT hotspot has a problem with the nearest hotspot. Although many sites come they are security protected.

  Access to the BT hotspots.

  The place most frequent that I need to connect to a BT hotspot has a problem with the nearest hotspot. Although many sites come they are protected from security and only the nearest BT hotspot is displayed. There are many others, but they are invisible. I think that there is a software that allows you to see several hot spots the. BT are unable to give me the details.

  This is probably a function of the driver for your wireless card.  I would check with the manufacturer of the computer or adapter.

  Good luck.

• Error1722 problem with the windows package install.

  I try to install the Cisco VPN software and I get error 1722.  Says that there is a problem with the windows package install.  How can I fix it?

  This is a general error and often a problem with the installation program itself, not Windows.

  Download the installer for the latest version taken support your version of Windows (32-bit / 64-bit),

  and give him another chance.

  If problem persistst, redirect your question to the Forum of Cisco's Support of TechNet.

  They will be able to help you the best.

  https://supportforums.Cisco.com/

  http://social.technet.Microsoft.com/forums/en-us/category/w7itpro

• Anyone who has a problem with the system crashes when importing using the new interface to import

  Anyone who has a problem with the system crashes when importing using the new interface to import

  Can specify you what Adobe program you use so that we do that your post is in the right forum?

• Problems with the windows player video media and internet explorer?

  Original title: Windows Media Player

  I have Windows Media Player 11. I can't play the videos with her. Videos MSN don't is not at all and YouTube loading starts playing and closes exactly 11seconds every time regardless of what particular video. I recently updated my IE 8 browser and tried to use Microsoft Fix it Center Online. It has fixed some problems but not this problem. Any ideas out there? Thanx.

  Hello

  (1) windows operating system you are using?

  (2) have you made changes before the start of this issue?

  (3) what is the exact error message or error code?

  (4) what type of video file you try to play?

  (5) in difficulty he makes you run?

  Step 1: Search for the codecs

  Codecs: Frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/codecs-frequently-asked-questions

  For reference:

  Solve problems in Windows Media Player

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-in-Windows-Media-Player

  Resources for the resolution of problems in Windows Media Player

  http://support.Microsoft.com/kb/843509

  According to the problem with the playback of videos in Internet Explorer, try the steps in the following article

  The video problems when you use Internet Explorer

  http://support.Microsoft.com/kb/2532294

• There was a problem with the Windows Live Hotmail service (a network connectivity problem temporary has nothing to do with your computer).

  There was a problem with the Hotmail service (a network connectivity problem temporary has nothing to do with your computer). Please try again

  . I really need to fix this! Help!
  original title: no answer not before!

  track every step!

  no change!

  I am getting really worried about it!

  Please ask in the forum Hotmail. We do not use it. We cannot answer your question.

  Windows Live Solution Center Hotmail Forum
  http://windowslivehelp.com/forums.aspx?ProductID=1

• Problem with the WIndows Update page

  I am running Windows XP with Service pack 3. Microsoft Security essentials is the security system. When trying to run Windows Update using Internet Explorer 8, at the point of the page is to check that if my system is the correct update software, the page fails, finally displaying the message "Internet Explorer has stopped to try to restore this Web site. It seems that the Web site continues to be a problem. "This is repeated each time I have repeat the initial attempt, or click 'Back to the microsoft.com site' on the error page. Is the problem with the Microsoft web page (the address is www.update.microsoft.com/microsoftupdate/v6/default.aspx ) or on my computer?

  When I try to run Windows Update... to the point that the page is to check If my system is correct, update software the page can't...  Is the problem with the web page of Microsoft ( www.update.microsoft.com/microsoftupdate/v6/default.aspx ) or on my computer?

  You are correct George: whenever you access the site Windows or Microsoft Update, Windows Update will take care of updating itself. that is, it looks for updates available from the Windows Update Agent or the customer allows you to update your system.

  Since June 21, 2012 a WUA new version 7. 6. 7600. 256 aired by WU to automatically update itself its version now aged 7. 4. 7600. 226 .

  The problem you see may occur when there is a version mismatch of the file with the Windows Update Agent files, which is a mixture of old files with the new files. This is due to an installation "or damaged."

  You can take a look at your windowsupdate.log file located in your WINDOWS directory, to check the error codes - missing files or failling updated files (especially c:\windows\system32\wuapi.dll, wups2.dll, c:\windows\system32\wups.dll or wuweb.dll).

  You must re-register or re - install files WU in order to obtain the Service Windows Update works again. Try here:

  http://support.Microsoft.com/kb/958053

  And

  http://support.Microsoft.com/kb/949104

  Trust that this assistance.

• Disabled the HTTPS option in Hotmail and problems with the Windows Firewall, Microsoft Security Essentials and Windows updates.

  Original title: Windows Live Hotmail only opens a new window links e-mail composition!

  I recently put my Windows Live Hotmail account to my default e-mail client in Internet Explorer 8 on my Windows XP SP3 System. Unfortunately, whenever I click on a link to e-mail on a Web page to open a new message, Hotmail tells me, "Sorry, there seems to be a problem with Hotmail right now", and a new/compose message window does not open. I disabled the HTTPS option in Hotmail, which fixed the problem. However, when I went to do a manual update of Windows, I am nailed with a Trojan horse! Apparently, the Windows Firewall and Microsoft Security Essentials have been affected by turning off HTTPS in Hotmail! It's 2012, and it's terribly disappointing that Microsoft only has not ironed out all the imperfections in these services now. If anyone can give me a solution (in simple terms), I would appreciate it!

  Thank you

  Ryan

  Hi Ryan,

  1. you receive messages or error codes when you access Windows updates?

  2. what happens exactly with the Windows Firewall and Microsoft Security Essentials?

  About the update of Windows, the Windows Firewall and Microsoft Security Essentials issues, you may try to launch the FixIt and see if it helps:

  Method 1:

  Resolve security issues to protect and secure Windows automatically

  The problem with Microsoft Windows Update is not working

  Method 2:

  You can also refer to article and perform a full scan on your computer by using the Microsoft Safety Scanner.

  Microsoft safety scanner

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  On the Windows Live Hotmail account, you can publish your request in instances of Windows Live to get help:

  http://answers.Microsoft.com/en-us/windowslive

• Family Vista premium SP2 - NAS - I can see it, can open its highest level, can go through it with the windows Explorer - strangely I can browse it with windows internet explorer 8 - what's up with windows Explorer?

  I have a WD NAS, who has worked through my Explorer windows until recently - now I can access only through Internet Explorer 8 using FTP.

  I use to be able to open the windows Explorer and able to 'network' and click on the NAS and enter my name/password and access all folders and files to the breast. Now I go into windows Explorer and I can see the NAS and I can click on it and enter my name and password, and it shows even the top-level folders-

  I can't do any further due to the standard contextual windows alert, and the message goes between the "network name is not available" and the message "already mapped the drive. I have not noticed a model and did not install anything at the same time. Don't try to do wireless, the NAS is ethernet wired to my router and my router to my computer - no router updates/changes - no updates/changes NAS - no I do not have the mapped drives sitting over there, yes I'm admin on the computer and the NAS server - there is no noticeble change I can find - not firewall , no anitvirus, no microsoft updates - anything good for troubleshooting?

  Anyone has an idea why only windows Explorer fails now to be able to access the NAS, esp when FTP with internet explore works fine? Thank you!

  Hi Dgbjr68,

  Try the following steps.

  Step 1

  Check the behavior in SafeMode with network and post back the result.

  http://Windows.Microsoft.com/en-us/Windows-Vista/advanced-startup-options-including-safe-mode

  Step 2

  You can also try to temporarily disable the firewall on your computer and check the status.

  http://Windows.Microsoft.com/en-us/Windows-Vista/turn-Windows-Firewall-on-or-off

  NOTE: Enable the firewall after trying this step.

  Previous post: the results.

  Bindu S -Microsoft Support

  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]