Everyone knows the watch switch silent mode to its own?

I noticed that my Apple Watch going in silent mode on its own. Anyone experience this problem? I want a software update with a small icon on the top when the watch is in silent Mode. Any thoughts?

Yes, mine did so a couple of times. Did not with 2.1 so far.

For suggestions, go here: http://www.apple.com/feedback/watch.html

Tags: Apple Watch

Similar Questions

Watch going in silent mode on its own

Sometimes--not always, but often enough to be annoying - my Apple Watch goes into silent mode "on its own initiative. I have NOT used the application settings or wink to do this, my iPhone is NOT cut, so it's a bit mysterious.

Hi Doug

You probably accidentally placed your watch in silent Mode using the cover for the Mute function.

Cover for Mute is a feature that automatically places your watch in silent Mode if the display is covered for 3 seconds immediately after receiving a notification alert (for example, for a text message). When the quiet Mode is enabled in this way, haptic feedback is provided as confirmation. The mode must be disabled manually in order to reactivate the sound alerts.

To turn off the Mute function coverage:

-On your iPhone, in the application of Eve, go to: Watch My > sounds & Haptics > turn it off coverage on mute.

More information:

Adjust the brightness, text, sound and haptic on Apple Watch - Apple Support

My I Phone 6 s incorrect display of battery percentage? everyone knows the same problem?

My I Phone 6 s incorrect display of battery percentage? everyone knows the same problem?

Hello dipudivakar,

Thank you for using communities Support from Apple!

From your post, I understand that your iPhone displays a percentage of the battery which is incorrect. To resolve this situation, I would first of all turn off the option to display the percentage of the battery on your iPhone. If you need information about how to disable this feature, the following article explains this process.

Display the percentage of the battery on your iPhone or iPad - Apple Support

After you have enabled this feature, please reboot your iPhone by following the instructions in the next section.

Restart your iPhone, iPad or iPod touch - Apple Support

Once finished, restart, enable the option to redisplay the percentage of your battery and test the question.

See you soon!

I have LR 6.1.1 CS and it keeps crashing, also tried to turn off the graphics card. Everyone knows the same and they have a solution.

Photoshop Lightroom I have LR 6.1.1 CS and it keeps crashing, also tried to turn off the graphics card. Everyone knows the same and they have a solution.

Hi ashvinkumarb40658145,

When exactly LR 6 crash and you use a Wacom?

Concerning

Rohit.

An unknown audio program plays on top of the outhers. It starts on its own. She disappears for a while if I reboot. How to kill this nuisance.

An unknown audio program plays on top of the outhers. It starts on its own. She disappears for a while if I reboot. How to kill this nuisance.

The first Question of troubleshooting: If the problem is new, what has changed between the time things worked and the time they do not have?

The second issue of Windows troubleshooting: what is the status of virus/malware of the machine? If you think it's clean, what programs (and versions) allows you to determine this?

Make sure that the computer is clean:
http://www.elephantboycomputers.com/page2.html#Removing_Malware

If the computer is clean, use the the Task Manager or Process Manager to find out what is running if you can identify the program 'song' for you. MS - MVP - Elephant Boy computers - don't panic!

Acer liquid E2 can vibrate off the coast in silent mode

Hi guys,.

I have problems with my acer E2 liquid. I can not turn the haptic feedback off when I'm in silent mode.

In settings > sounds > vibrate is turned off

also in settings > language and input > android keyboard > vibrate on keypress is off.

When I'm in silent mode, the bottom 3 buttons (back, home, menu) keep giving haptic and unlocking the screen. When I'm not in silent mode, all the vibrations are disabled.

It's very awkward meetings, because vibrations are some noise.

I hope you can help me with this problem.

Kind regards

Karen

Hi Karen,.

I had the same problem. It doesn't seem to be an option in the settings of the phone, but if you download profile Scheduler App, you can turn haptic phone in all of audio profiles. I hope this helps.

Kind regards

Andy

I wanted to shoot penalty, put the computer in safe mode, now its blocked, firm FF 3 times, computer rebooted, still in safe mode.how out safe mode

I wanted to do in the event of problem, I put the computer in safe mode and now I can't get out of safe mode. I closed FF & computer restarted 3 times, even shut down the computer, still in safe mode. What should I do to get out of safe mode?

I gave up and took my laptop to the Apple store... everything is ok now... I don't know what they were doing.

How to switch from firefox to its own directory?

I had to use Chrome to install Firefox and it get program_files automatically. I need in its own directory - can I move it?

Thanks Cor - el. It turned out that the computer, on which I was did not have administrator privileges. That must be why IE8 don't would not download it and Chrome messed with it.

Anyway, once that I solved that resettlement was offered installation customized as expected.

you're going to love Firefox!

Robin

The mouse jumping around corner on its own (TX2000 tablet PC)

HP needs to fix or replace my HP TX2000. The mouse cursor keeps jumping to the bottom right of the screen on its own. I realized that there are a lot of heat generated in this corner of the basic reason keyboard, making it probably the mouse jump there. the mouse works perfectly when I rotate the screen of this corner, but lie, which makes it extremely difficult to work with the screen tilted in a different direction and the Del key BkSpace hiding behind the screen! Ofcuorse, this heat is the culprit and a strange design of unit fault!

I had this same problem (although it seems a bit more sporadic than what others have experienced).

The physical reason of the problem seems to be the corner of the base of the shelf RF interference; because the tablet takes the pen by measuring how much the emitted RF is altered by the pen, the interference near the corner must "look like" the pen being there.

I have "confirmed" this by placing a piece of foil between the screen and the base (in the corner only); This removes the behavior of jumping. Although I did not open my tablet, I suppose that the interference comes from the power of conditioning circuits for the processor?

In regards to the Wacom HID "pen" disable the fix mentioned above: the feather still work like a pen (RF, with a fine location and pressure sensitivity), or it doesn't work like a 'finger' (capacitive touch sensor on screen, much coarser location resolution)?

Cleaning the table - moving of the values in a table with its own sequence

Hi all

I was responsible for cleaning up some data. Table has its own sequence and some of these sequence numbers now have empty values, I need to transfer the data about to remove these blanks.

Hard to explain, so I'll illustrate it:

create the table adam_test
(index field_number number (20),)
field_data char (20));

insert into adam_test values (' 1 ', ' ');
insert into adam_test values ('2', 'ADAM');
insert into adam_test values ('3', 'BOB');
insert into adam_test values (' 4 ', ' ');
insert into adam_test values ('5', 'JOE');

SQL > select * from adam_Test;

FIELD_DATA INDEX FIELD_NUMBER
------------ --------------------
1
2 ADAM
3 BOB
4
5 JOE

I need manipulate the table so that FIELD_DATA whites are no longer there, so go back valid in the sequence lines if any gap is present.

.. the desired end result would be:

FIELD_DATA INDEX FIELD_NUMBER
------------ --------------------
1 ADAM
2 BOB
3 JOE
4
5

I may or may not remove empty lines altogether once it made, but this isn't important, that I'm struggling with the first bit for now.

Any ideas how I could achieve in PLSQL?

Thank you!
Adam

Monty77 wrote:
What happens if the table has another column, customer_id:

SQL> select * from adam_test order by custom,field_number
  2  /

    CUSTOM FIELD_NUMBER FIELD_DATA
---------- ------------ --------------------
    100000            1
    100000            2 ADAM
    100000            3 BOB
    100000            4
    100000            5 JOE
    100001            1 CLIVE
    100001            2
    100001            3
    100001            4 STEVE
    100001            5 MICKEY

10 rows selected.

merge
  into  adam_test a
  using (
         select  rowid rid,
                 field_data,
                 row_number() over(partition by custom order by case field_data when ' ' then null else field_number end nulls last) new_field_number
           from  adam_test
        ) b
  on (
      a.rowid = b.rid
      )
  when matched then update set a.field_number = b.new_field_number
/

10 rows merged.

SQL> select * from adam_test order by custom,field_number
  2  /

    CUSTOM FIELD_NUMBER FIELD_DATA
---------- ------------ --------------------
    100000            1 ADAM
    100000            2 BOB
    100000            3 JOE
    100000            4
    100000            5
    100001            1 CLIVE
    100001            2 STEVE
    100001            3 MICKEY
    100001            4
    100001            5

10 rows selected.

SQL>

SY.

Without change to the FC switch to mode mode end-host FC

In the window of maintenance last night, I was going to spend one of my systems UCS switch FC FC end-host Mode. The intention was to be able to reach the storage systems via an external FC SAN, instead of the current situation where storage is directly attached to the FIs. The UCS system in question is redundant fabric 6248UP of interconnections, blades are all of the B200M2 or the B200M3, and infrastructure (UCSM, FIs and IOM) running version 2.2(3a).

The plan was relatively simple. First of all, I would like to change FI B mode end-host FC. Once this has been done re - I would record vHBAs the blades attached to the fabric B in my storage system, so that they could access their storage via the external SAN. Then I go through all the blade servers and ensure that they had access to storage multipath healthy and tolerant, how I would like to repeat the process for FI.

It turned out to be a disaster, however. Once I started the process of change FI B FC end-Host mode, FIs times restarted, and all servers access storage and network. When they came again, both of them had changed the fashionable end-host FC, which means that none of the blades had access to their storage volumes more. So there is nothing to do but to return the change. Yet once, two FIs restarted at the same time and they both returned to the top in switching mode of CF. A few hours later, after have rebooted most of blade servers and cleaning applications having failed, we were in normal production.

So what I was asking here why on Earth the two of my FIs restarted at the same time. Is this a known bug? The user interface would certainly think one can ignore at a time as I had planned, because the CF implemented end-Host Mode action link is on the page of each individual FI in UCSM (under hardware-> connections-> interconnection fabric A fabric / B). (So the action Set FC Switching Mode of link, incidentally.) Also, when I click on this link, I get a warning saying local ' are you sure you want to set the mode of end-host FC? If you select Yes , the fabric of interconnection will restart and this application will disconnect'. Note the use of the singular here; the warning refers to an single fabric of interconnection, which is perfectly logical that the change was requested only on one two FIs.

Torus

I quite understand your point!

The wording is misleading, because it is not in order with a completed receipt one.

That's why Kenny of the TAC wrote the answer above.

In my opinion, the documentation must be corrected.

Some Java applets do not work after the installation in silent mode, resolved in tilting head "enable Java content in the browser" - why?

We have about 1 800 workstations with Windows 7 (32-bit and 64-bit) running different versions of JRE Java 6 update via update 7 51 32. Most are on 6 45 update. We would like to standardize on update of Java 7 51 (32-bit) and get everyone updated to this version for security reasons.
For the last two weeks, we had trouble with our driver prior to installation. What we are seeing, it of that our procedure successfully closed all open Internet Explorer Windows and processes related to Java, uninstall all older versions of JRE Java and says then successfully installed of the update of Java 7 51. The Java Control Panel works. We can even take Internet Explorer to check the Java Version or Java Tester - what Version of Java are you running? and confirm that the Java applets on these sites load (although the latter only works after adding the site to the list of site exceptions); However, when the testers try to access our system Kronos Workforce Central 6.3.10, used by this system Java applets do not load.
We tried the following things, which none worked:
- Empty the Internet Explorer browser cache and cookies.
- Clear the local Java cache.
- Restart the computer.
- Reset Internet Explorer settings, including personal settings.
Go to the Panel control Java, ranging in the Security tab, uncheck "enable Java in the browser content", the only thing that works based on apply, press OK in the pop-up window, checking the box "Enable Java in the browser content", press OK, press OK in the pop-up window and then restart Internet Explorer. It is only after this point, all Java applets, including those used by Kronos Workforce Central 6.3.10, work.
What I need to know, is how I can automate the reset procedure from the box "Activate Java content in the browser" after installation, or I'm something wrong or missing a step in automatic installation that is originally for this?
We use Microsoft SCCM 2007 R3 to perform this upgrade, and everything is run on the client computer by using the SYSTEM account. First of all, the "javaclean.ps1" PowerShell script is run, with part of the process of command line change of the strategy of running script PowerShell for Bypass. This script handles the closure of Java-dependent applications and Java deals and uninstall older versions of Java.
javaclean.ps1:

#Find all Java products, excluding the automatic update that actually is uninstalled when the main installation is removed.

write-host "If you are looking for all versions of Java installed" - ForegroundColor yellow

[table] $javas = Get-WmiObject-query "select * from win32_Product where (name as" Java % ' or name like '% of Java (TM)' or "J2SE %") and <>the name «Java Auto Updater»»

If ($javas.count - gt 0)

{

write-host "Java is already installed" - ForegroundColor yellow

#Get all Java processes and kill them. If java is running and processes are not killed then this script will call a restart suddenly.

[table] $processes = Get-Process-name "Java * ' #-erroraction silentlycontinue

$processes += get-Process - name "iexplore" #-erroraction silentlycontinue

$processes += get-Process - name "firefox" #-erroraction silentlycontinue

$processes += get-Process - name 'chrome' #-erroraction silentlycontinue

$processes += get-Process - name "jqs" #-erroraction silentlycontinue

$processes += get-Process - Name "jusched" #-erroraction silentlycontinue

$processes += get-Process - Name 'jp2launcher' #-erroraction silentlycontinue

If ($processes. Count - gt 0)

{

foreach ($myprocess to $processes)

{

$myprocess.kill)

}

}

#Loop through the Java products installed.

{foreach ($java to $javas)

write-host "Uninstall" $java.name - ForegroundColor yellow.

$java. Uninstall()

}

}

Once this script is complete, SCCM calls a script VBS "install.vbs" to perform the installation of Java JRE 7 day 51.
install.vbs

'* ********************************

'*

' * Script: install JRE 7 routine

'*

' * Date: 14/03/14

' * Author: [REDACTED]

' * Rev: 1.0

' * Notes:

'*

'* ********************************

'--------------------------------

' / / / Common

'--------------------------------

Set objFSO = CreateObject ("Scripting.FileSystemObject")

Set objWshShell = CreateObject ("WScript.Shell")

«Get the system architecture»

Protected colSys: Set colSys = GetObject("WinMGMTS://"). ExecQuery ("SELECT AddressWidth FROM Win32_Processor", 48)

Dim objSys

For each objSys in colSys

If objSys.AddressWidth = 64 then bolIs64Bit = True

Next

'Get the operating system

Dim colOS: Set colOS = GetObject("WinMGMTS://"). ExecQuery ("" Select * from Win32_OperatingSystem ", 48")

Dim objOS

For each COS in colOS

If left (objOS.caption, 20) = 'Microsoft Windows 8' then

bolIsWin8 = True

WScript.Echo "win8.

End If

If left (objOS.caption, 22) = "Microsoft Windows 8.1" Then

bolIsWin81 = True

WScript.Echo "win81."

End If

Next

' Set 32-bit directory program files

If bolIs64Bit = True Then

strPFILES = "Program Files (x 86)".

strSYSDIR = "SysWOW64".

Else strPFILES = "Program Files."

strSYSDIR = "System32".

End If

' Set repertoire_windows

strWIN = objWshShell.ExpandEnvironmentStrings("%windir%") "

'Set the current directory ".

strCurrentDir = objFSO.GetParentFolderName (Wscript.ScriptFullName)

' Set computer name

strCompName = objWshShell.ExpandEnvironmentStrings("%computername%") "

'--------------------------------

' / / / Main script

'--------------------------------

'--------------------------------

' / / / Installation using .msi & capture exit code

'--------------------------------

' intExitCode = objWshShell.Run ("msiexec.exe i" "" & strCurrentDir & "\package.msi" "" & "TRANSFORMS =" "" & strCurrentDir & _)

""\transform.mst"" "ALLUSERS = 1 Reboot = ReallySuppress/SB»(, 8, True)"

' wscript.quit (intExitCode)

' * COMMANDS RUN HERE *.

"Create the folder structure if it does not already exist

strFullPath = 'c:\Windows\Sun\Java\Deployment' "

"How many levels are there in the path?

nLevel = 0

strParentPath = strFullPath

Do until strParentPath = «»

strParentPath = objFSO.GetParentFolderName (strParentPath)

nLevel = nLevel + 1

Loop

ILevel = 1 to nLevel

"Path of directory to the iLevel level to understand

strParentPath = strFullPath

For j = 1 To nLevel - iLevel

strParentPath = objFSO.GetParentFolderName (strParentPath)

Next

' Is it exist directory? If not, create it.

If objFSO.FolderExists (strParentPath) = False Then

Set newFolder = objFSO.CreateFolder (strParentPath)

End If

Next

"Kill process

objWshShell.Run "taskkill /F /IM iexplore.exe", 8, True

objWshShell.Run "taskkill /F /IM firefox.exe", 8, True

objWshShell.Run "taskkill /F /IM chrome.exe", 8, True

objWshShell.Run "taskkill /F /IM javaw.exe", 8, True

objWshShell.Run "taskkill /F /IM java.exe", 8, True

objWshShell.Run "taskkill /F /IM jqs.exe", 8, True

objWshShell.Run "taskkill /F /IM jusched.exe", 8, True

"Copy deployment files

objFSO.CopyFile strCurrentDir & "\deployment.config", "c:\Windows\Sun\Java\Deployment\", True

objFSO.CopyFile strCurrentDir & "\deployment.properties", "c:\Windows\Sun\Java\Deployment\", True

"Disable UAC".

' If bolIsWin8 or bolIsWin81 = True Then

"objWshShell.Run"reg.exe ADD HKLM/v PromptOnSecureDesktop t REG_DWORD 0 f d", 8, True"

"objWshShell.Run"reg.exe ADD HKLM v EnableLUA /t REG_DWORD /d 0 f", 8, True"

"objWshShell.Run"reg.exe ADD HKLM/v ConsentPromptBehaviorAdmin t REG_DWORD 0 f d", 8, True"

"End If

"Install application".

intExitCode = objWshShell.Run ("msiexec.exe i" "" & strCurrentDir & "\jre1.7.0_51.msi" "IEXPLORER = 1 AUTOUPDATECHECK = 0 = 0 JU JAVAUPDATE = 0 WEB_JAVA = 1 ALLUSERS = 1 Reboot = ReallySuppress/qn", 8, True ")

"Enable UAC".

' If bolIsWin8 or bolIsWin81 = True Then

"objWshShell.Run"reg.exe ADD HKLM/v PromptOnSecureDesktop /t REG_DWORD /d 1 f", 8, True"

"objWshShell.Run"reg.exe ADD HKLM EnableLUA /t REG_DWORD /d 1 f v", 8, True"

"objWshShell.Run"reg.exe ADD HKLM v ConsentPromptBehaviorAdmin /t REG_DWORD /d 5 f", 8, True"

"End If

WScript.Quit (intExitCode)

'--------------------------------

' / / / Installation via .exe on network

'--------------------------------

"objWshShell.Run" "" "& strCurrentDir &"\Setup.exe"" s - sms - f1 "" "& strCurrentDir & _"

"" "\setup.iss" "-f2" "" & strWIN & "\Temp\Install-app.txt" "", 8, True

"Need to turn off the security warning opening the file first.

Set objEnv = objWshShell.Environment ("PROCESS")

objEnv ("SEE_MASK_NOZONECHECKS") = 1

' intExitCode = objWshShell.Run ("" "& strCurrentDir &"\jre-7u45-windows-i586.exe"" /s /v "" / norestart "& _)

("" "TRANSFORMS =" "" & strCurrentDir & "\Tribe-jre7.mst" "", 8, True)

' WScript.Quit (intExitCode)

' * COMMANDS RUN HERE *.

"Then turn it back on.

objEnv.Remove ("SEE_MASK_NOZONECHECKS")

'--------------------------------

' / / / Features

'--------------------------------

Help on this issue would be much appreciated!

It turns out that it is actually a problem with Kronos Workforce Central. We had the parameter 'site.java.plugin.CLSID.familyVersion' as an application set to "clsid:CAFEEFAC-0016-0000-FFFF-ABCDEFFEDCBA", which is the CLSID Java Java 6. After update this value to "clsid:8AD9C840 - 044F-11 D 1-B3E9-00805F499D93" (the universal CLSID of Java), this problem does not occur when the automatic upgrade of Java.

We also have good Java 6 and 7 in our environment and did during our implementation of Kronos, so I don't know why we used the Java 6 CLSID in the first place.

Detective Conan!

How to uninstall all versions of Firefox via the script in silent mode?

I was instructed to remove Firefox to 200 computers in our society for safety reasons.
I scanned all the computers for versions of firefox installed on them and noticed there are different versions of firefox on our computers.

I need to be able to uninstall them via our software deployment tool.
Please let me know if there's a script that can do the job.
Thank you

Hello

Maybe this help you:
- https://wiki.Mozilla.org/installer:Command_Line_Arguments

Z2 turns on the volume in silent mode?

Hello

My Z2 phone began to turn for the notification and volume setting in itself. How to fix this bug?

I went through the settings and set all sounds off, but after an hour or two, it's bacn at normal volume. Have had this problem for a week now.

Have restarted the phone several times.

Deleted all the apps.

Nothing helps.

@PetterPan,

In the link that @uliwooly provided review #4, do not disturb. Although DND is activated you can have certain exceptions, such as calls and messages will still make noise if activated.

Although it is in safe mode, do what you were doing before checking if the ringtones and notifications etc are still making the noise.

Smartphones Blackberry blackBerry rings when the vibrate or silent mode

How to fix my blackberry 8530 to stop the ring when calls come, when it is set to vibrate only, or in silence. Quite embarrassing to the office, or church, etc. I never had this problem with any other phone - vibrate means vibrate right?

If you use the small speaker icon which should be in the upper left corner of your screen (in the meantime no themes moved its location) you can open a menu that has the ability to 'change profile '. Select this option and select "Vibrate only" in the list. From there, scroll down to 'Phone' and select and you can customize your settings from there.

Your problem seems to be that "Volume" setting in this menu is not set to silent.

Everyone knows the watch switch silent mode to its own?

Similar Questions

Maybe you are looking for