everything crashing when trying to install windows xp for a dual boot with preinstall windows 7

Similar Questions

• Problem: Restart loop everything when trying to install Windows 7

  I tried to install windows 7 on my laptop Pavilion dv4t 1400 [64 bit] and it froze while he was completing installation. I shut down the computer and tried to restart it. Now, I turn it on and it starts as windows 7, then goes to a screen that indicates the set of services [or something like that] then it goes back to the beginning. I tried almost everything, and I fear that my computer is in ruins. = (If you please help!

  You have tried to start with 7 DVDs and start over? Delete all partitions and create a new.

• error 0x8080CBB1 when trying to install Windows Xp

  I tried to install Windows Xp when all of a sudden a blue screen with error message "IRQL_NOT_LESS_OR_EQUAL" with the code STOP: 0x0000000A (0x00000002, 0x00000000, 0 x 00000065, 0x8080CBB1) rises and impossible to complete the installation.

  Hello

  This problem may occur if there is incompatible hardware or an incompatible device on your computer driver.

  Refer to this article for help:

  Error message "Stop 0x0000000A Irql_Not_Less_or_Equal ' during the upgrade to Windows XP
  http://support.Microsoft.com/kb/311564

  See also:

  
  You receive an error message "Stop 0x0000000A" in Windows XP
  http://support.Microsoft.com/kb/314063

  Kind regards
  Afzal Taher
  Microsoft technical support engineer

• no pilot of the aircraft were found when trying to install windows 7 on a new construction

  It is a new construction: card mother Asus M4A87TD/USB3, Phenom X 4 965 processor he's, with 1 64 GB Soild State drive which is where Windows 7 Pro must be installed, Raid 2 500 GB SATA hard drives that I use, total 8 GB memory Dual Channel DDR-1600 and an ATI Radeon HD5830 1024 GDDR5 video card.

  I am now trying to install windows and I get an error message saying that no device drivers found when you try to install windows 7 pro, so I tried to put in the disc that came with the motherboard because that's what I found during my research on this subject and it won't read the disc. I also learned that I should use a USB however, I don't have a large enough to copy documents from the disk device drivers.

  Any input would be appreciated because I was a machine now for a week only to find what I wanted and then in construction and now this problem - please help

  Suggest you only begin by installing a configuration non-RAID first. Also since this is a new construction, you need to do some test equipment to verify that you don't have a hardware problem. Connect a SATA drive to a standard SATA connector rather than the RAID connector.

  Set of utilities to test for computer HARDWARE manufacturers:

  Note: If you are OverClocking or use any automatic overclocking BIOS features, Intel EIST or Turbo Mode (turn off).
  then back at the speed of stock as a starting point.

  Disconnect the other internal hard drives and external USB devices.

  First try running Memtest86 +:  It runs from a floppy disk or CD, you must remove or
  confirm whether your one or more of your sticks of memory are bad or the values of the SPD in the BIOS are correct.
  Let it run for as long as you can: 2,4,6,8 or several hours (at least 3 full passes), if no errors at that time then your ram is OK.
  http://www.memtest.org/
  Memtest86 + Guide/How To (use the.) ISO to create a bootable CD)
  http://www.overclockers.com/forums/showthread.php?t=409152

  Hard drive test - CD Bootable:
  If you have a new hard drive Seagate the very next thing would be to download Seagate Seatools (bootable CD)
  and check bad sectors:
  http://www.Seagate.com/WW/v/index.jsp?locale=en-us&name=SeaTools&vgnextoid=720bd20cacdec010VgnVCM100000dd04090aRCRD
  For Western Digital disks using WdDiag: http://support.wdc.com/product/download.asp?lang=en
  Samsung Estool: http://www.samsung.com/global/business/hdd/support/utilities/ES_Tool.html
  Samsung Disk Manager software: http://www.samsung.com/Products/HardDiskDrive/utilities/shdiag.htm
  Hitachi Drive Fitness Test Software: http://www.hgst.com/hdd/support/download.htm#DFT
  Diagnostic tool available for use by customers who feel their Toshiba brand Fujitsu hard drive:
  http://SDD.Toshiba.com/main.aspx?path=ServicesandSupport/WarrantySupport/SoftwareUtilities
  Notice of suport Fujitsu disk utility: http://www.fujitsu.com/us/services/computing/storage/hdd/
  Toshiba CD bootable: (BACK Diagnostic Tool version 7.0 for IDE/ATA/SATA hard disks)
  http://SDD.Toshiba.com/main.aspx?path=ServicesSupport/FujitsuDrivesUSandCanada/SoftwareUtilities#diagnostic

  Once Windows is installed:

  Of device drivers: Have you installed latest device from the manufacturer of the motherboard drivers?
  Check their support site for the latest drivers as the CD that came with the motherboard may have
  older less stable drivers.

  Check the manufacture of graphics card download site: Download and install the latest drivers for Windows 7
  for your card.
  ATI: http://support.amd.com/us/gpudownload/Pages/index.aspx
  NVIDIA: http://www.nvidia.com/Download/index5.aspx?lang=en-us

  See also the test of 'Smoke box' Nvidia or other demos: http://www.nvidia.com/object/cool_stuff.html#/demos
  or equivalent ATI.

  Prime 95:
  http://www.Mersenne.org/freesoft/
  It's a stand alone .exe file contained in an archive .zip.
  Simply choose to run the 'stress test' option for 3 hours or more.
  If your PC can pass this test, your memory and CPU
  are very good (close the housing cover in order to maintain adequate ventilation)

  Core Temp:
  The temperature of each core of the processor.
  Note: For the overclockers using stock radiator and cooling fan Intel/AMD, you can expect a temperature range of
  35 to 40 ° C at idle and 60-65 c max when running Prime95.
  http://www.alcpu.com/CoreTemp/

  CPU ID (CPUZ): http://www.CPUID.com/cpuz.php
  Watch the clock speed of the CPU under various conditions of loading
  (when using speed step technology Intel EIST).
  #1 Note:
  CPU - ID has two tabs (memory and SPD) that indicates the actual speed of the memory and 'SPD' tab displays the nominal speeds
  for each memory location is full.
  #2 Note:
  COMPARE the two values, the actual speed should not exceed the rated speed of your memory.

  CPUID HWMonitor: Hardware program that reads the sensors of health main PC monitoring systems.
  voltages, temperatures, fans speed.
  http://www.CPUID.com/HWMonitor.php

  Test of Stress of FurMark GPU (graphics card):
  http://www.oZone3D.NET/benchmarks/fur/

  Pass marks burn in test: http://www.passmark.com/
  Burnin test, and their test bench at the same time give a good workout from all the major parts of Windows.

  HD Tune:
  Provides information of the car and has an option (tab scan error) to test your drive.
  http://www.hdtune.com/

  SpeedFan:
  Monitors internal temperatures and has a function of analysis health online (SMART tab) for hard disks drive.
  It displays your drives model number and compares your drive with other discs of the same brand and model.
  http://www.almico.com/SpeedFan.php

  GPU - Z:
  A utility light, designed for you give information about your video card and GPU.
  http://www.techpowerup.com/GPUZ/

  PC WIZARD:
  A powerful utility designed especially for detection of hardware, also analyses more.
  He is able to identify a large scale of system components and supports the latest technologies
  and standards.
  http://www.CPUID.com/pcwizard.php

  Partition Wizard Home Edition:
  http://www.partitionwizard.com/free-partition-manager.html
  Note: There is also a CD bootable or versions of the bootable Flash drive:
  http://www.partitionwizard.com/Partition-Wizard-bootable-CD.html
  http://www.partitionwizard.com/bootable-Flash-drive.html
  Among the features and functions: create partition, Delete partition, format partition,.
  A partition resize, move partitions, Partition recovery after an accidental deletion,
  Convert the partition, partition Explore, Hide partition,
  Change the drive letter, a partition active Set, Explorer (content display) of the partition.
  Note: To complete any task use the "Pending Operations" box at the bottom left.

  Hiren BootCD
  http://www.Hiren.info/pages/Bootcd
  Hiren BootCD from USB (USB key)
  http://www.Hiren.info/pages/Bootcd-on-USB-disk
  (something more questions)

  UBCD4Win:
  http://www.UBCD4Win.com/index.htm
  UBCD4Win is a recovery CD bootable that contains software used for repairing,
  restoration or diagnose almost any computer problem.

  MyEventViewer - an easy way to display your event logs:
  http://www.NirSoft.NET/utils/my_event_viewer.html

  JS
  http://www.PAGESTART.com

  Never be afraid to ask. This forum has some of the best people in the world to help.

• Cannot remove the software Intel (r) PROSet/Wireless when trying to install Windows 8

  I am trying to install Windows 8 on a Dell running Windows 7 laptop - all my drivers are up to date and I performed the upgrade wizard who told me that I had to uninstall the software three elements because they are incompatible with Windows 8.   I deleted two, but when I try to delete the third, Intel (r) PROSet/Wireless Software of Bluetooth, the system returns a message saying "there is a problem with this Windows Installer package.  A program required for this install to complete could not be run - please contact the support staff. "I'm stuck - Windows installation cannot continue until I can get rid of this element, and nothing to do, it seems able to remove apparently.  Any suggestions?

  I found I had to activate the blue tooth wireless adapter. Also I had the same error until I turned it on. Then he allowed me to uninstall to the satisfying of the installer of Windows 8.

• ESXi 3.5 and when trying to install windows server 2008

  I installed ESXi 3.5 on my server and successfully created a first virtual computer on which I am trying to install Windows server 2008 standard. I use VMware Infrastructure Client 2.5 from a Vista machine to access my virtual machine console.

  Installation of Windows server is an ISO file located in the root directory of the ESX Server data store. Everything went well with the installation until one last server restart showed a screen stating "the password must be changed before logging on the first time' by clicking on 'OK' present a login for 'Administrator' screen, asking me to enter a password for the 'new' and 'Confirm password '.

  Any attempt to enter a new password results (up to 14 characters, mixture letter & number) in a message "unable to update the password, the value provided for the new password does not meet the requirements of length, complexity or the history of the area.

  As far as I know, I'm not usig a specific domain, have never been able to access Windows server 2008 to create an admin account. I don't know how to solve this problem. I am new to VMWare and Windows server 2008.

  Any suggestion to move forward and allow me to have access to the server via the console?

  Thanks in advance for your help, Claude

  This isn't really a problem with VMware, but more of a problem of Windows 2008 password complexity requirements.

  The account that she is not asking that you must change the password is the local administrator account.

  And you have tried in upper case, lower case, numbers and special characters?  Something like Win2008!@#$ maybe?

  Jase McCarty

  http://www.jasemccarty.com

  Co-author of VMware ESX Essentials in the virtual data center

  (ISBN:1420070274) Auerbach

• I can't create partitions in unallocated space when trying to install Windows.

  problem installing Windows

  I tried to install windows 7, then the hard drive selection window, it shows 2 spaces unallocated and I can't delete or create a new partition of them and niether I am able to install windows .please help

  Hello

  You can erase your entire hard drive with command prompt from booting from the Windows installation disc and run the utility "diskpart", clear full hard drive, make new partitions and install the operating system.

  (a) start the computer from the Windows installation disc.

  (b) click on 'Next' at the first prompt.

  (c) click on "Repair your computer."

  (d) click "next".

  (e) click on "Command prompt."

  (f) type "diskpart" without the quotes, and then press "Enter".

  (g) list disk 'type' without the quotes, and then press "enter".

  (h) type "select disk 0" without the quotes and replacing '0' by the actual number of the car you want to erase.

  (i) type "clean" without the quotes, and press "Enter." The drive is now completely erased.

  (j) restart the computer.

  (k) through the installation of Windows 7 with regular steps.

  I hope this helps.

• Error code 80070570 0 x when trying to install Windows 7 Pro 64-bit

  Original title: Windows 7 Professional 64-bit

  Brand new OEM copy 1 stick 4 GB DDR3 1067 new motherboard & processor Intel Celeron G530 @ 2.4 GHz dual core EMT 64 taken in charge brand new DVD/CD drive nothing attached to the computer but monitor, mouse & keyboard

  I am trying to install windows 7 Professional 64 bit on a new hard drive.  He does it very well until it gets to the expansion of the files.  It is about 28% & then gives me an error code 80070570 0 x and says some files are missing.  I tried to re start several times.  He always stops here.

  Try reinstalling the memory stick into the slot in the motherboard.

  Then run memory test software against the installed memory. Memtest86, for example. Let it run all night.

  http://www.Memtest86.com/

  Tom Ferguson

• Adobe Reader 10.1.3 crashing when trying to print, Windows 2003 server 64-bit (Citrix/Terminal srv)

  I'm running 9 servers Citrix with about 300 daily users.

  Servers are running Windows Server 2003 64-bit, with Citrix Presentation server 4.5.

  Since the last time that I've updated (Adobe Reader, Flash Player and Windows updates), he had a problem when you try to print from Adobe Reader.

  First of all, I have installed Adobe Reader 10.1.2 and when users tried to print, then planted program.

  Then I tried the upgrade to Adobe Reader 10.1.3 and the same problem occurred.

  Then I tried downgraded to the same 10.1.0,.

  Finally, I tried and old version 9.5 and again, I get the same error.

  I also tried to disable the protected mode, nothing works.

  No matter what I do, I always get this crash when you try to print.

  The funny thing is, if I do a new install of Adobe Reader 10.1.3 then printing works fine, until users connect to the server.

  Then it will work ever again, unless I have do a reinstall.

  The program crashes when you type preferences.

  Help!

  I've now changed my PDF Reader Foxit Reader on my servers and everything works great.

  Thank you very much Adobe!

• x 80070002 error when trying to install Windows 8.1 Windows 8

  Hello.

  I try to install Windows 8.1 Windows 8 and I get the error message x 80070002.

  I can't update the other applications also.

  Does anyone have a solution?

  Thank you.

  I get this in the journal of setuperr:

  Setuperr.log
   
  Windows $ CAN/BT/sources/Panther
   
   
  2014 09/11 21:44:40, SetupMgr MOUPG error: error reading
  Store data in registry M². Data = [StoreSetupDownloadCancel], HRESULT =
  [0 x 80070002]
  2014 09/11 21:44:40, SetupMgr MOUPG error: error reading
  Store data in registry M². Data = [StoreSetupDownloadPause], HRESULT =
  [0 x 80070002]
  2014 09/11 21:47:48, error MOUPG
  CSetupManager::Execute (363): result = 0x800705BB
  2014 09/11 21:47:48, error MOUPG CSetupHost::Execute (209):
  Result = 0x800705BB
  2014 09/11 21:47:55, SetupMgr MOUPG error: error reading
  Store data in registry M². Data = [StoreSetupDownloadCancel], HRESULT =
  [0 x 80070002]
  2014 09/11 21:47:55, SetupMgr MOUPG error: error reading
  Store data in registry M². Data = [StoreSetupDownloadPause], HRESULT =
  [0 x 80070002]
  2014 09/11 22:19:56, error [0x08039d] MIG cannot add mapping for
  Profile of user C:\Users\g_moo_000. Error: 1009: Win32Exception: configuration
  Registry is corrupt. [0x000003F1] __cdecl
  MIG::CIndirectKeyMapper:CIndirectKeyMapper(Class_UnBCL::String_*,struct_HKEY__)
  *, Class UnBCL::String *, class UnBCL::String *, int, int, const
  MIG::HiveLoadRetryOptions *) [gle = 0x000000cb]
  2014 09/11 22:19:56, error [0 x 080801] MIG profil_utilisateur loading
  error. Abandonment as a result of an external request. [gle = 0x000000cb]
  2014 09/11 22:19:56, error InitDownlevelOCMode
  an exception: Win32Exception: error loading user profile. Abandonment due to
  external demand. : the specified user does not have a valid profile.
  [0x000004E5] void __cdecl Mig::COnlineWinNTPlatform:ProcessUser (class
  MIG::CRegistryDataStore *, class Mig::CRegistryDataUnit *, UnBCL::String, class
  (*, Class UnBCL::String *, int, int)
  2014 09/11 22:19:56, error Exception MIG OC:
  OC::CDownlevelOCStore:CDownlevelOCStore: InitDownlevelOCMode of motor
  has failed.
  2014 09/11 22:19:56, error MS could not save the State of OC.
  Error: 0x8007001F
  2014 09/11 22:24:23, error [0x08039d] MIG cannot add mapping for
  Profile of user C:\Users\g_moo_000. Error: 1009: Win32Exception: configuration
  Registry is corrupt. [0x000003F1] __cdecl
  MIG::CIndirectKeyMapper:CIndirectKeyMapper(Class_UnBCL::String_*,struct_HKEY__)
  *, Class UnBCL::String *, class UnBCL::String *, int, int, const
  MIG::HiveLoadRetryOptions *) [gle = 0x000000cb]
  2014 09/11 22:24:23, error [0 x 080801] MIG profil_utilisateur loading
  error. Abandonment as a result of an external request. [gle = 0x000000cb]
  2014 09/11 22:24:23, MigStartupOnline error caught
  exception: Win32Exception: error loading user profile. Abandonment due to external
  request: the specified user does not have a valid profile. [0x000004E5] empty
  __cdecl Mig::COnlineWinNTPlatform:ProcessUser(class_Mig::CRegistryDataStore)
  *, Class Mig::CRegistryDataUnit *, class UnBCL::String *, UnBCL::String, class
  (*, int, int)
  2014 09/11 22:24:23, SP pSPDoMainGather error: engine
  initialization failed with error: 0 x 00000004
  2014 09/11 22:24:23, SP CGatherData error: Migration
  failure of the phase. Status: 4 [gle = 0 x 00000012]
  2014 09/11 22:24:24, SP operation failed error: collect
  data, the field of action: everything. Error: 0 x 80070004 [gle = 0x000000b7]
  2014 09/11 22:24:24, error MOUPG MoSetupPlatform:
  ExecuteCurrentOperations reported failure! [gle = 0x000000b7]
  2014 09/11 22:24:24, MOUPG MoSetupPlatform error: help
  
  transform the error code: [0x80070004] [gle = 0x000000b7]
  2014 09/11 22:24:24, error MOUPG
  CDlpTransformDataMigrate::MigrateData (1477): result =
  0 x 80070004 [gle = 0x000000b7]
  2014 09/11 22:24:24, error MOUPG
  CDlpTransformDataMigrate::TransformFile (1095): result =
  0 x 80070004 [gle = 0x000000b7]
  2014 09/11 22:24:24, error MOUPG
  CDlpTransformDataMigrate::Execute (544): result = 0x80070004
  2014 09/11 22:24:26, error MOUPG
  
  CDlpTask::ExecuteTransform (3154): result = 0x80070004
  2014 09/11 22:24:26, error MOUPG
  CDlpTask::ExecuteTransforms (3327): result = 0x80070004
  2014 09/11 22:24:26, error MOUPG CDlpTask::Execute (1550):
  Result = 0x80070004
  2014 09/11 22:24:26, error MOUPG
  CSetupManager::ExecuteTask (1323): result = 0x80070004
  2014 09/11 22:24:26, error MOUPG
  CSetupManager::ExecuteTask (1288): result = 0x80070004
  2014 09/11 22:24:26, error MOUPG
  CSetupManager::Execute (413): result = 0x80070004
  2014 09/11 22:24:26, error MOUPG
  CDlpTask::RestartTransform (2444): result = 0xC1800107
  2014 09/11 22:24:29, error CONX [UploadTelemetryFile]
  failed to download telemetry files [0x803d0013]
  2014 09/11 22:24:29, error CONX [SendTelemetry] has no
  Download the file of telemetry on AEStat
  2014 09/11 22:24:29, error MS
  CSqmSession::SetSQMEndTime: Cannot set EndTime for datapoint with Id = 12576.
  DataPoint not found
  2014 09/11 22:24:29, error MS does not have end M²
  time. HR = 0 x 80070490
  2014 09/11 22:24:29, develop the error MOUPG: Error reporting
  Finalize time: [0x80004005]
  2014 09/11 22:25:45, error MOUPG CSetupHost::Execute (209):
  Result = 0x80070004

  Hello

  Thanks for posting your query in the forums of Windows.

  I understand that you get an x 80070002 error message when you try to update Windows 8 to 8.1 Windows. We're really sorry for the inconvenience caused to you. If you receive Error 80070002 while accessing applications on Windows store or by updating to Windows 8.1, you must delete the temporary files to update that Windows uses to identify updates for your computer. You might face this problem due to several reasons like corrupt Windows Update components, software Antivirus installed on the computer, third, conflicts etc. I would suggest trying the following steps and check if it helps.

  You can refer to the suggestion of Praseetha K Nair in the following link and check if it helps.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows8_1-windows_store/after-updating-to-Windows-81-receiving-error-code/a0efca65-233D-42DE-A58B-f1f8455fd59e

  I hope this helps.

  Please report if the problem persists and we will be happy to help you further.

• Access denied when trying to install Windows XP SP3

  : I have HP Media Center PC and have tried to install SP3 from the internet and bought the CD and halfway through, get the error msg: access denied. Does anyone have the answers to why it will not go through. I use Malwarebytes Anti-Malware as my safety for my computer.

  Hello

  Welcome to the community forums of Microsoft and thanks for posting the question. Looks like you are unable to install Service pack 3 and get an error message 'access denied'.

  1 are logged as administrator?

  2. are you aware of changes to the computer before the show?

  I suggest you perform the steps described in the article:

  When you try to install Windows XP Service Pack, you receive the error message "Access denied" or "installing the Service Pack has not completed"

  http://support.Microsoft.com/kb/949377

  Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/) how to back up and restore the registry in Windows

  Hope this information helps. Please reply with the status so that we can help you.

• Error message "Windows cannot be installed on this computer" when trying to install Windows 7 Professional on laptop HP Envy 4 comes preloaded with Windows 7 Home Edition basic

  I bought a new hp envy 4 portable that this laptop is coming with the preload windows 7 Home Basic when I try to install windows 7 32-bit professional, but when it is copied all of the files at the end of the installation of finishing it showing error message that windows could not be installed on this computer hardware. Please suggest the best solution.

  Thank you
  Vishal

  Have you tried using Anytime Upgrade?

  If the license for Windows 7 Professional, you have access to is a retail version update or complete, you can use the product key and the Express upgrade from Windows 7 Home Basic to Windows 7 Professional. First of all, check that the edition of Windows 7, you are upgrading is already enabled (if it isn't, you will encounter complications and that you might start all by performing a clean installation). Click Start, type Anytime Upgrade, click on the option enter a key, enter the key of Windows 7 Professional on demand, click Next, wait while checking the key, accept the license agreement, click on upgrade, wait while the software upgrades, (it may take 10 minutes or more depending on the if updates are required) your computer restarts automatically, after the reboot, Windows 7 will notify you updating the computer, the computer will restart once more automatically and will be completed the upgrade, a window will appear notifying the upgrade was successful and your computer is ready to use, click Close, you should be upgraded to Windows 7 Professional your files, programs and settings retained.

• "Configuration of the Windows updates failed. Restoration of the changes. Do not turn off your computer"error when trying to install Windows on Windows 8 updates

  Former title: windows 8

  Stuck into that and can't GET OUT! Failure of Windows updates. Restoration of the changes. Do not turn off your computer.

  Hello

  Please contact Microsoft Community.

  We understand the inconvenience that you are experiencing.

  1. How long it stays on the same screen?
  2. Windows Update is causing this issue?
  3. Have you tried to interrupt the installation at any time?

  When you try to install Windows updates, you get the following error: configuration of the Windows updates failed. Restoration of the changes. Do not turn off your computer. If this occurs, it may take 30 minutes to undo changes, and then the system will display the Windows login screen. Suggest you not to interrupt this until he completely undo these changes.

  Please see the article below and see if this can help you.

  https://support.Microsoft.com/en-us/KB/949358

  Let us know if you need assistance.

• x 80070002 error when trying to install Windows 8.1

  Hello.

  I try to install Windows 8.1 Windows 8 and I get the error message x 80070002.

  I can't update the other applications also.

  Does anyone have a solution?

  Thank you.

  I get this in the journal of setuperr:

  Setuperr.log
   
  Windows $ CAN/BT/sources/Panther
   
   
  2014 09/11 21:44:40, SetupMgr MOUPG error: error reading
  Store data in registry M². Data = [StoreSetupDownloadCancel], HRESULT =
  [0 x 80070002]
  2014 09/11 21:44:40, SetupMgr MOUPG error: error reading
  Store data in registry M². Data = [StoreSetupDownloadPause], HRESULT =
  [0 x 80070002]
  2014 09/11 21:47:48, error MOUPG
  CSetupManager::Execute (363): result = 0x800705BB
  2014 09/11 21:47:48, error MOUPG CSetupHost::Execute (209):
  Result = 0x800705BB
  2014 09/11 21:47:55, SetupMgr MOUPG error: error reading
  Store data in registry M². Data = [StoreSetupDownloadCancel], HRESULT =
  [0 x 80070002]
  2014 09/11 21:47:55, SetupMgr MOUPG error: error reading
  Store data in registry M². Data = [StoreSetupDownloadPause], HRESULT =
  [0 x 80070002]
  2014 09/11 22:19:56, error [0x08039d] MIG cannot add mapping for
  Profile of user C:\Users\g_moo_000. Error: 1009: Win32Exception: configuration
  Registry is corrupt. [0x000003F1] __cdecl
  MIG::CIndirectKeyMapper:CIndirectKeyMapper(Class_UnBCL::String_*,struct_HKEY__)
  *, Class UnBCL::String *, class UnBCL::String *, int, int, const
  MIG::HiveLoadRetryOptions *) [gle = 0x000000cb]
  2014 09/11 22:19:56, error [0 x 080801] MIG profil_utilisateur loading
  error. Abandonment as a result of an external request. [gle = 0x000000cb]
  2014 09/11 22:19:56, error InitDownlevelOCMode
  an exception: Win32Exception: error loading user profile. Abandonment due to
  external demand. : the specified user does not have a valid profile.
  [0x000004E5] void __cdecl Mig::COnlineWinNTPlatform:ProcessUser (class
  MIG::CRegistryDataStore *, class Mig::CRegistryDataUnit *, UnBCL::String, class
  (*, Class UnBCL::String *, int, int)
  2014 09/11 22:19:56, error Exception MIG OC:
  OC::CDownlevelOCStore:CDownlevelOCStore: InitDownlevelOCMode of motor
  has failed.
  2014 09/11 22:19:56, error MS could not save the State of OC.
  Error: 0x8007001F
  2014 09/11 22:24:23, error [0x08039d] MIG cannot add mapping for
  Profile of user C:\Users\g_moo_000. Error: 1009: Win32Exception: configuration
  Registry is corrupt. [0x000003F1] __cdecl
  MIG::CIndirectKeyMapper:CIndirectKeyMapper(Class_UnBCL::String_*,struct_HKEY__)
  *, Class UnBCL::String *, class UnBCL::String *, int, int, const
  MIG::HiveLoadRetryOptions *) [gle = 0x000000cb]
  2014 09/11 22:24:23, error [0 x 080801] MIG profil_utilisateur loading
  error. Abandonment as a result of an external request. [gle = 0x000000cb]
  2014 09/11 22:24:23, MigStartupOnline error caught
  exception: Win32Exception: error loading user profile. Abandonment due to external
  request: the specified user does not have a valid profile. [0x000004E5] empty
  __cdecl Mig::COnlineWinNTPlatform:ProcessUser(class_Mig::CRegistryDataStore)
  *, Class Mig::CRegistryDataUnit *, class UnBCL::String *, UnBCL::String, class
  (*, int, int)
  2014 09/11 22:24:23, SP pSPDoMainGather error: engine
  initialization failed with error: 0 x 00000004
  2014 09/11 22:24:23, SP CGatherData error: Migration
  failure of the phase. Status: 4 [gle = 0 x 00000012]
  2014 09/11 22:24:24, SP operation failed error: collect
  data, the field of action: everything. Error: 0 x 80070004 [gle = 0x000000b7]
  2014 09/11 22:24:24, error MOUPG MoSetupPlatform:
  ExecuteCurrentOperations reported failure! [gle = 0x000000b7]
  2014 09/11 22:24:24, MOUPG MoSetupPlatform error: help
  
  transform the error code: [0x80070004] [gle = 0x000000b7]
  2014 09/11 22:24:24, error MOUPG
  CDlpTransformDataMigrate::MigrateData (1477): result =
  0 x 80070004 [gle = 0x000000b7]
  2014 09/11 22:24:24, error MOUPG
  CDlpTransformDataMigrate::TransformFile (1095): result =
  0 x 80070004 [gle = 0x000000b7]
  2014 09/11 22:24:24, error MOUPG
  CDlpTransformDataMigrate::Execute (544): result = 0x80070004
  2014 09/11 22:24:26, error MOUPG
  
  CDlpTask::ExecuteTransform (3154): result = 0x80070004
  2014 09/11 22:24:26, error MOUPG
  CDlpTask::ExecuteTransforms (3327): result = 0x80070004
  2014 09/11 22:24:26, error MOUPG CDlpTask::Execute (1550):
  Result = 0x80070004
  2014 09/11 22:24:26, error MOUPG
  CSetupManager::ExecuteTask (1323): result = 0x80070004
  2014 09/11 22:24:26, error MOUPG
  CSetupManager::ExecuteTask (1288): result = 0x80070004
  2014 09/11 22:24:26, error MOUPG
  CSetupManager::Execute (413): result = 0x80070004
  2014 09/11 22:24:26, error MOUPG
  CDlpTask::RestartTransform (2444): result = 0xC1800107
  2014 09/11 22:24:29, error CONX [UploadTelemetryFile]
  failed to download telemetry files [0x803d0013]
  2014 09/11 22:24:29, error CONX [SendTelemetry] has no
  Download the file of telemetry on AEStat
  2014 09/11 22:24:29, error MS
  CSqmSession::SetSQMEndTime: Cannot set EndTime for datapoint with Id = 12576.
  DataPoint not found
  2014 09/11 22:24:29, error MS does not have end M²
  time. HR = 0 x 80070490
  2014 09/11 22:24:29, develop the error MOUPG: Error reporting
  Finalize time: [0x80004005]
  2014 09/11 22:25:45, error MOUPG CSetupHost::Execute (209):
  Result = 0x80070004

  Hello

  Welcome to the Microsoft community forums.

  Use the troubleshooter in this article to resolve errors Windows Update '0 x 80070002' or '0 x 80070003 '. This problem occurs when some files in the update of Windows are missing, even if the update is downloaded and extracted successfully.

  Also, follow the additional manual steps in this article and check if that helps:

  Error code Windows Update '0 x 80070002' or '0 x 80070003 '.

  http://support.Microsoft.com/kb/910336/en-us

  Also see this Microsoft article:

  Update to Windows 8.1 of Windows 8

  http://Windows.Microsoft.com/en-us/Windows-8/update-from-Windows-8-tutorial

  I hope this helps. If you need help with Windows, let us know and will be happy to help you.

• Get the error code 646 when trying to install windows updates.

  Continue to receive the 646 code error when you try to install windows updates

  See: http://support.microsoft.com/kb/2258121 TaurArian [MVP] 2005-2011-implementation to date of Services