Everything looks blurry and also works very slowly after that graphics drivers have been updated. Other applications or browsers are not affected.
Another issue that has been ubiquitous since before this problem is that the browser "freeze" for half a second or two while changing / reloading tabs if there are problems connecting to some websites.
go to the Tools Menu-> Options-> advanced-> general-> uncheck use hardware acceleration when available -> click OK
Check and tell if its working.
Tags: Firefox
Similar Questions
-
Windows xp freeze
Hello boy from Mississippi.
Thank you for your message. We need to get some more information about what exactly happens not on.How long it lasts? Nothing has changed recently with regard to the hardware or software changes that could have caused this?What about frozen screens, that you get an error message when this happens? In the affirmative, please let us know the error you receive.If you do not receive an error, is there something that makes this happen every time or is it completely random?In regards to the internet, we need determine if the problem is your computer or your service provider. You have dial-up, DSL, cable, etc.?Concerning the drivers, you can go to your computer manufacturer's Web site to find the latest drivers for your computer.Please let us know so that we can better help you get your problem solved.See you soonEngineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.
-
Windows 7 64 bit host works very slowly after discontinuation of VMWare Workstation
I am running 64 bit Windows 7 on a Dell laptop with an i7, 6 GB ram and VMWare Workstation 9 processor. Everything works well on the host and the VM, while the virtual machine is powered on but after the suspension of the virtual machine and station work out of the system host becomes very slow and applications become desensitized. This lasts for several minutes after the stoppage of work. In general, I have executed only a VM at a time, but even when I got a couple of them run both the host system and they are very sensitive. I started the task with great difficulty Manager when this occurs to see if I can see problems with the free time of processors and memory use, and everything seems fine. So far all my research turned discussions about this kind of problem during execution of the virtual machine so I am at a loss to know even where to go next to make this diagnosis.
Kind regards
Bruce Brandt
This is because windows is the collection of memory the vmware used in the system and marking of these blocks of memory piece by piece as 'free '. If you shutted down of the virtual machine (not paused) then the memory can be returned to the system immediately. I guess if it was caused by the Intel RST driver because I noticed about there is also no question AMD computer used by my colleague.
You can wait until the stops of HDD-light, keeping the stats of light, constant in the meantime try avoid to activate any application of consumption-e/s disk / operations.
-
Ive only been a Firefox user for many years now and get automatic updates without problem. But I got an update today, November 14, 2011 Australia and now Firefox crashes / freezes after loading the home page. I changed NOTHING else on my system at all. Other browsers work fine.
I went through your help pages, but could not find anything that my help - I have a 5 year old laptop Dell with Windows 7 running. Ive never had any problems until now.Hey Yuna,
Completely uninstall Firefox from your system. {http://kb.mozillazine.org/Uninstalling_firefox#On_Windows}
You can download the latest version of Firefox from http://www.mozilla.org/en-US/firefox/fx/
If you don't want to lose your bookmarks, you can back up your bookmarksbackups inside your profile directory {http://kb.mozillazine.org/Profile_folder} folder.
-
Hello, I changed the default 4 GB aData RAM sticks 8Gbx2 stick.
No, it takes forever to start and open any aplication including terminal.
Do you have a Linux swap partition? With 16 GB of RAM you should not have it. You also have an SSD?
-
Create button appear and break slide after that rollover slidelets have been renewed?
Hello
I'm trying to use conditional actions and standards advanced in order to prompt a user to rolling bearing 5 slidelets before a button 'continue' appears. I attached variables to each slidelet, created the button and marked as invisbile, and created a contitional action but I don't know where to attach them to the action:
I use a very complicated method to do something so simple? I tried various methods, approach, but then the project continues to the next slide when he has to pause until the user clicks on the button to continue even if the property "project of break up to what the user clicks" is checked.
Thanks for all your help and I would like to know if there are I can provide additional information.
You have not at all an Expression. Have you looked at this link?
I would create 5 variables, one for each event working capital: v_RO1, v_RO2, v_RO3, v_RO4, v_RO5 with a default value of 0.
Each rollover event would trigger a conditional in action with two decisions, here RO1_Action for the first overview of the art:
- = 'Always' simulated standard action
IF 1 is equal to 1
Assign the v_RO1 with 1 - "CheckAll" = actual condition to check the values of variables:
IF v_RO1 is equal to 1 AND
v_RO2 is equal to 1 AND
v_RO3 is equal to 1 AND
v_RO4 is equal to 1 AND
v_RO5 is equal to 1
See the DoneButton
This duplicate and edit the variable in the first decision
Also recommended to change the action on a click for the bearings to no Action instead of continue.
Be sure to insert a click box to pause the slide somewhere on the slide where there is little chance that the user clicked.
Lilybiri
- = 'Always' simulated standard action
-
Speed of Internet connection works very slowly (21 Kps) on Qosmio F20
My Internet connection speed (dial-up) on Qosmio F20 working very slowly (21 Kps)
When I try to any other computer (desktop or lap top) it works correctly and speed comes up to 25 KpsPlease, could you help me what I have to do.
Thank youHave you tried to connect and to prove your speed more than once? I mean we´re to talk about 4 difference Kbps (!) on a dial-up connection! So I suggest you to watch and prove your speed again and again, because there may be various reasons that a dial-up connection can be slow.
Please keep me informed of your progress.
Welcome them
-
Portege R100: 4GB SD card works very slowly->; unable to format
Laptop works fine, no problem when using 1 GB SD card. What SD 4 GB inserted PC card works very slowly. Finally, I am able to run the software Toshiba Format SD memory card (download the latest version). It does not seem to recognize the card of 4 GB. Unable to format. When later tried with 1 GB card, everything works fine.
If someone was able to get a 4 GB SD card?
I'm not sure if the laptop software needs a patch, or if the 4 GB card is not fully compatible with SD cards standards, however it was purchased from reputable suppliers.
Graham
Hello
I think that it s nothing wrong with the software, but the SD card is simply not compatible 100%.
In recent times, the SD card sizes are rising rapidly.
I think that the card reader and the software were not intended to manage this big SD card like this.How to buy an external SD card reader?
These devices are not very expensive and I think the new generation should be able to also handle 4 GB SD cards. -
USB HDD TRAY 1, 5 t: = red light drive lights works very slowly
Hello
It is brand new USB STORE 1, 5 t 3.5 "disk.
Drive normally begins with the red light, initialize and move to blue light. Initially drive works slow - flashing blue when something happens.
... but after a few minutes of use, red light may turn on a moment (for e.g. when new folder is created or some files are copied - then drive works very slowly - it appears when you copy).
After a few seconds, record going to the blue back light - and everything is OK until the switch next to the red.
1 is this normal behavior?
2. What is the meaning of red light when the drive is working?Thank you in advance.
Hello
I m no owner of this HARD but I have a theory.
According to your information, I think that the red light only appears if data would be written to the HARD disk.
The blue light appears during the reading of data from the HARD drive.Welcome them
-
All of a sudden my computer started working very slowly.
All of a sudden my computer started working very slowly. I did not load the new programs and nothing works in the background. What can I do to speed up performance. time to respond when I open a program should take place as quickly as it used to be.
On Sunday, April 14, 2013 22:33:10 + 0000, Laptop1440 wrote:
All of a sudden my computer started working very slowly. I did not load the new programs and nothing works in the background. What can I do to speed up performance. time to respond when I open a program should take place as quickly as it used to be.
I can't be sure of what you said, but it looks like it is very
probably that you are infected with malware.What anti-virus and anti-spyware programs do you run?
Ken Blake
-
Hello
10 g R2 on AIX, two days ego DB works very slowly.
I ran AWR for day/hour.
What is more important to see in this report?
I thought to wait events:
What kind of wait here may be the cause of the problem? And any solution for this?Top 5 Timed Events Avg %Total ~~~~~~~~~~~~~~~~~~ wait Call Event Waits Time (s) (ms) Time Wait Class ------------------------------ ------------ ----------- ------ ------ ---------- CPU time 1,617 32.5 local write wait 1,385,767 995 1 20.0 User I/O db file parallel write 1,269,863 957 1 19.3 System I/O buffer busy waits 35,262 612 17 12.3 Concurrenc control file parallel write 241,782 257 1 5.2 System I/O
Thank you.Looks like a busy buffer wait but before you say something more, what is the interval of the snapshots used in the report? An hour?
Aman...
-
I downloaded and installed PS and LR (the two CC) several months ago (Office Win10Pro), and they work very well. Now I get a message 'download error. Please contact Customer Support. »
After pressing the keys [almost] randomly for a few minutes, everything started working again. It seems now not to be broken, so I won't try to fix it. Case dismissed.
-
I have first items 13, recently installed on a new laptop of Dell Inspiron 17 5000 Series. The program works very well. However, when I have access to the program, I get a message that there is an update available, 13.1. I let him go ahead and do the update before using the program. It only updated, then restarts first elements 13. As soon as the program loads, I again get the message that 13.1 update is available. How to stop the happy ground?
RTA,
Thank you very much for your answers. As you suggest, I went to the help/updates and found that 3 points were scored update, Manager, 13 Photoshop and first elements 13 elements. On a hunch, instead uncheck one of them, I thought I'd see what would happen to let update all 3. It took a while, but, long story short, stopped the happy Vangogh and everything seems fine. Thank you for your messages, much appreciated. Walt Maken
-
Just set up a new PC and downloaded Firefox. It will not display correctly my Zenfolio Photo site or it will play music that accompanies the slideshow on the home page. I have 2 other PC and it works very well on them. All are Windows 7 Home Premium.
Yes. He uses Flash to show the images and music. Go to tools-> Add-ons and check the Plugins. Make sure that Shockwave Flash 16.0.0.305 is not set to never turn on. I keep me always activate.
If you do not see flash, can get Adobe Flash here: https://www.adobe.com/products/flashplayer/distribution3.html and the EEG for the Plugin-based browsers.
If flash is installed, then it sounds like something is blocking.
-
Getting a message that my system is blocking the program but their isn't an indication that my system is interfering with its operation. Antivirus programs have been removed from my computer; That is to say. Norton Antivirus, Symantec Antivirus. Firewall doesn't seem to have this effect on the operation of Security Essentials. Why I get this message when I restart my computer is a mystery to me, because it works very well after downloading until I restart my computer. My email address is > * address email is removed from the privacy *.
Hello
Did you change your computer before this problem?
A possible reason for this problem is that you have installed entirely or partially on the computer security software conflict.
You may need to use a cleaning tool to remove your prior security software:
Microsoft Security Essentials - Installation Checklist and frequently asked Questions
http://experts.Windows.com/w/experts_wiki/89.aspx
If the problem exists, you can ask your question in the Forums of Microsoft Security Essentials.
Maybe you are looking for
-
iPads not working only not with the cache server
Hello! We have implemented a Server Cache El Capitan... And the strange thing is that it works with macs and iPhones but not with iPads! Has anyone of you ever heard of something similar? Thanks in advance! Carl
-
I just changed computers and downloaded Firefox on my new machine. It runs Win - 7, then I'm inept homepage of MSN with news about celebrities and ads every time I open Firefox. How can I change it to, say, plain vanilla Google?
-
As the said line topic. I've updated the BIOS on our NB100 to 1.90 in Windows XP, and now Linux (ubuntu) freezes on login. We organize one machine dual boot and WXP still works fine. Ubuntu freezes completely when you open a session and full charge o
-
Why can't I watch dvd
-
How to import music from the external hard drive
From: sleepyjoe Message: I have a new computer with vista, I downloaded my music to an external hardrive to my xp computer, how do I import my music, I find nothing in the creation of music of windows which you alow me to do this thanks