Everytime I turn on my printer, printer starts to do the alignment of toner

Similar Questions

• Everytime I turn on my printer it prints a test page.

  Original title: Put in new ink cartridge

  HP PSC 1500 printer all in one

  When I sulk in a new tri-color cartridge it tell me to print a test page, and then the scanner. I did it, but everytime I turn on my printer it prints a test page.

  Hi Doreen,.

  It seems that whenever you turn on the printer it prints a test page again.

  Here are some links that you can try to solve this problem.

  
  

  An alignment Page prints whenever the all-in-one is turned on or off or a print job is started

  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c01336397&cc=us&DLC=en&LC=en&product=1146336&tmp_track_link=ot_search

  HP PSC 1500 all-in-one Series - replace and align ink cartridges

  http://h20000.www2.HP.com/bizsupport/TechSupport/document.jsp?objectID=c00312577&prodSeriesId=428822

  See also the printer Guide of HP PSC 1500 of the user.

  http://h10032.www1.HP.com/CTG/manual/c00366227.PDF

  After completing the methods suggested above, answer us with the State of the question.

• I can't cancel the Narrator microsoft on my computer... It appears everytime I turn on my computer and start talking as a kind of mysterious ridiculous voice...

  I have Vista Service Pack 2, and Microsoft Narrator is a kind of

  application of ghost.

  Narrator:

  Try this: go to control panel > accessibility > Ease of Access Center > explore all settings > use the computer without a display > uncheck the box by tour Narrator > click Save...

  http://www.Vistax64.com/tutorials/124575-Narrator-turn-off.html

  The link above also has links to deactivate/activate the on-screen keyboard, magnifying glass, etc.

  See you soon.

  Mick Murphy - Microsoft partner

• Everytime I turn on my laptop I need to enable the setting of wi - fi to connect to the internet, the setting seems to zero each time, how do I fix?

  I have windows 7 and the only way I can find to get on the internet when I start my laptop is to use easy settings and turn on wi - fi. I turned on the setting to 'Maintain the previous setting when the system restarts' that is below, but the setting seems to scratch without worrying. Am I missing something?

  Hello

  -What is the brand and model of the laptop?
  -What do you mean by "easy settings?
  -Have you installed a utility software to manage the wireless connection?
  -Did you do changes on the computer before this problem?
   
  I would say also allows you to check the wireless service are automatically enabled for.
  Follow the steps below metnioned:
  1. click on Start, type services.msc in the start search box and press on enter.
  2. in the list of Services (Local) , right-click on automatic wireless LAN configuration, and then click Properties.
  3. If the drop-down list Startup type is set to the value off, select Automatic from the drop-down list Startup type.
  4. click the button Start under the status of the service item and click OK.
   
  Hope this information helps.

• My computer restarts when I turn it on and it starts to install the updates

  I have a laptop. Whenever I try to turn it on it says "installation updates 3 3 0% 0f" and then it stops after a few seconds. Why is this and what can I do about it?

  Updated repeat continuous step 3 of 3:

  Let us know if that helps.

  Messages rating helps other users

  Mark L. Ferguson MS - MVP

• The resolution does not change everytime I turn on my pc or restart?

  The resolution does not change everytime I turn on my pc or restart?

  The resolution does not change everytime I turn on my pc or restart?

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/resolution-changes-after-reboot/448c4735-851a-44BB-8286-9d160a9f335e

• HP3520 starts to move the printhead itself.

  I have a Deskjet HP3520 printer that I bought recently and I DO NOT have the ePrint feature turned on.  Yet twice, in the middle of the night, the printer started to move the print head as if it were in the cycle of 'clearing '.  I love the printer, but it is an annoying 'feature'.  I would like feedback as to what might be the cause.  I use the Wi - Fi connection to talk to the printer, but this connection is secured by WPA2 password, so I doubt a 'signal' is inbound on the Wi - Fi connection.  All thoughts

  Hey tommyj192,

  The printer, when left, will periodically perform cleaning/control on printer ink system procedures.  The transport will be moved and cleaned from time to time to ensure that the ink does not dry in the ports of ruin the printer.  The only way around this is to put off the printer, however it will go through a procedure of verification on the next power.

• Windows 7 does not start directly on the desktop

  Hi guys,.

  Need your help on this one... .my computer runs windows 7 Home premium 64-bit, I just installed VMware workstation 7.1. Problem is this

  Before installation of VMware, when I turn on my computer, it starts directly on the desktop but now it starts until the windows login screen where I choose me as the user (Administrator) after having chosen only then it opens a session on the desktop. Please, keep in mind, there is only 1 user account created for this computer and it's me... what could be the problem? I don't want that... I want windows to load directly on my desk after turning on my computer.

  I didn't mingle with the settings under VMware before asking you guys... as I am a first time user of VMware.

  Would appreciate any help a little. Thank you

  Workstation creates a user account for its own use. Even if this account is hidden (that is why you don't see on the login screen), it always results in that there is more than one account is activated, which in turn disables the automatic connect feature. You can reactivate autologinby following the instructions here:

  http://support.Microsoft.com/kb/315231

• I need to know how to disable the test print cause everytime I turn on the printer prints featured.

  I need to know how to disable the test print cause everytime I turn on the printer prints featured.  It is hp1315 series.

  Hello

  If you want to disable printing test page, you must check with the manual of the printer. Try the steps from the following link:

  An alignment Page prints whenever the all-in-one is turned on or off or a print job is started
  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c01336397&cc=us&DLC=en&LC=en&product=1146336&tmp_track_link=ot_search

  I suggest you to contact HP for better support.
  http://h30434.www3.HP.com/T5/printer-all-in-one-software/BD-p/software

  Additional information:
  http://h20000.www2.HP.com/bizsupport/TechSupport/document.jsp?objectID=c01577197&lang=en&cc=us&ContentType=SupportFAQ&prodSeriesId=360489&prodTypeId=18972

  Printer in Windows problems
  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

• I have a psc 1510. How to print a test page everytime I turn it on?

  I would like the 1510 PSC DO NOT automatically print a test page everytime I turn on the printer. I don't do a lot of printing, so I don't want to waste paper by the presence of an extra page printed up evry time I want to just print a few pages. Is there a way to disable this test to the start page?

  I use the PSC 1510 on a Mac, OS X 10.6.8.

  Hi there owen13,

  This sounds like the alignment page must be scanned. This article should cover the problem you are experiencing. Give the steps described a shot and tell us if it helps.

  Good luck!

• Everytime I turn on my computwr, I get a message that Windows is to install my hp7200 printer but fails to install.

  Printerwindows programs device is not recognize my printer is installed and works and keeps trying to reinstall with failure results

  everytime I turn on my computwr it says it's to install my hp7200 printer but then he said: it does not. my printer has been connected snd installed for over a year and it works very well

  I suggest you to uninstall and reinstall the latest compatible drivers for Windows 7.

  You can also run the troubleshooting of the printer.

  Open the printer Troubleshooter

  Open the printer Troubleshooter by clicking the Start button, then Control Panel. In the search box, type troubleshooting, and then click Troubleshooting. Under hardware and sound, click on use printer.

  For more information, visit the below mentioned link:

  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  Printer problems:

  http://blogs.technet.com/b/markrussinovich/archive/2010/04/12/3324570.aspx

  Run the printer difficulty of:

  http://support.Microsoft.com/GP/printing_problems?EntryPoint=WHHT

  You can see the below mentioned links.

  http://Windows.Microsoft.com/en-us/Windows7/install-a-printer

  http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-drivers

  http://Windows.Microsoft.com/en-us/Windows7/change-your-default-printer

  http://Windows.Microsoft.com/en-us/Windows7/printing-to-the-correct-printer

• C5180 drivers reinstall everytime I turn on the printer.

  Everytime I turn on my C5180 drivers reinstall. My operating system is Vista. This results in multiple copies of the printer (one that works) in my printer folder. Can someone suggest a solution to stop what is happening please?

  Remove the PS C5100 printer icon all that does not work. After you remove all the non-working icons, you will need to disable HP Cue device discovery service. To do this, please follow the steps below:

  -Click Start > type in the search boc 'Services '.

  -Services window will open

  -Find HP Cue Device Discovery service

  -Double-click on the service

  -change the startup type of the DISABLE status or startup to STOPPED

  -Click apply then OK

  -try to restart your computer

• How can I stop my HP Photosmart to print a test page everytime I turn it on?

  I finally got to what I saw even if the model number on the screen is another for the model that I have my printer, but now it prints a test page everytime I turn it on. How can I stop this from happening?

  Hello

  Check with HP, their drivers support and documentation online and ask in the forums of HP on known issues.

  Support HP & drivers
  http://welcome.HP.com/country/us/en/support.html

  Contact HP
  http://welcome.HP.com/country/us/en/contact_us.html

  HP forums
  http://h30434.www3.HP.com/PSG/

  Maybe uninstall and reinstall is the correct option - check with HP.

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• HP Deskjet 3630: everytime I turn the power 'on' the printer prints the test page. HP DESKJET 3630

  This is a new printer. I think it very strange that he should do.

  Hello

  Thank you for using the HP Forums.

  Have you done the alignment for cartridges successfully? ANC, you check out this post to see if it will help to solve your problem?

  http://h30434.www3.HP.com/T5/inkjet-printing/why-does-my-DeskJet-2540-always-print-a-test-page-every-time/TD-p/3519477

  Hope that helps!

• HP Officejet 6830: wants to turn off printer 2-sided, and the author of the previous question link does not work

  to turn off printer 2 faces, and the author of the previous question link does not work

  Please read this post then provide some details.  What operating system? Windows, you can change the default value by going into the directory devices and printers, click with the right button on the Officejet 6830, select Printing Preferences, and choose the desired default values, apply.