Example of 7604 MID programs

I can't find a sample program for mid-7604. Example Finder NOR will not yield any success. Is it possible that I have not a driver or a service pack installed?

Thank you

Hello Sterling2,

The motor amplifier or the disc is the part of the system that takes control of motion control and converts current to the motor and we have no examples for readers. However, you should be able to find examples for your particular motion controller in Finder example NOR > Input and Output material > Motion Control

Tags: NI Software

Similar Questions

  • How to get examples of exploitation of Programming Guide RetrieveProperties?

    I use the VI SDK 2.5.

    When I use the SimpleClient example I can connect to the VC server and retrieve information.

    I used the example of SimpleClient code to retrieve the properties and it works perfectly.

    Then I started to read the chapter on the PropertyCollector in the Programming Guide, the first thing I noticed is that the example code given the guide will never work.

    Methods and constructors unexistent used, fortunately there are other ways to achieve the same code by following the example of SimpleClient.

    I rewrote the big crossing (pages 75 and 76) method so that it looks like the style of SimpleClient.

    Whenever I try to retrieve the properties I get the InvalidArgument-SoapException, which, according to the API reference, means that the pfSpec is incorrect.

    The pfSpec is delivered by the function of the Program Guide I rewrote.

    Can someone tell me what I am doing wrong? If I use the SimpleClient pfSpec works without any problem

    Here is the code I use:

    PropertyFilterSpec pfSpec = getSpec (_rootFolder, characteristic of products);

    ObjectContent [http://] oc = service. RetrieveProperties (propCol, new PropertyFilterSpec [| ]) http:// [ ] oc = service. RetrieveProperties (propCol, new PropertyFilterSpec [] );

    Variable as _rootFolder, _service and _propCol are those of SimpleClient, it should work as expected.

    Below the rewritten function:

    PropertyFilterSpec getSpec (ManagedObjectReference startObj, characteristic of products PropertySpec) {}

    Sleepers of a pool of resource of parent to a pool of child resources.

    TraversalSpec resourcePoolTraversalSpec = new TraversalSpec();

    resourcePoolTraversalSpec.name = "resourcePoolTraversalSpec";

    resourcePoolTraversalSpec.type = "ResourcePool;

    resourcePoolTraversalSpec.path = "resourcePool;

    resourcePoolTraversalSpec.skip = false;

    resourcePoolTraversalSpec.selectSet is new SelectionSpec [] {new SelectionSpec(), new SelectionSpec()};.

    resourcePoolTraversalSpec.selectSet [0] .name = "resourcePoolTraversalSpec";

    resourcePoolTraversalSpec.selectSet [1] .name = "resorcePoolVmTraversalSpec";

    Ties to a pool of resources to a virtual machine associated with the pool.

    TraversalSpec resourcePoolVmTraversalSpec = new TraversalSpec();

    resourcePoolVmTraversalSpec.name = "resourcePoolVmTraversalSpec";

    resourcePoolVmTraversalSpec.type = "ResourcePool;

    resourcePoolVmTraversalSpec.path = "vm".

    resourcePoolVmTraversalSpec.skip = false;

    A ComputeResource ResourcePool rooted ties.

    TraversalSpec computeResourceRpTraversalSpec = new TraversalSpec();

    computeResourceRpTraversalSpec.name = "computeResourceRpTraversalSpec";

    computeResourceRpTraversalSpec.type = "ComputeResource;

    computeResourceRpTraversalSpec.path = "resourcePool;

    computeResourceRpTraversalSpec.skip = false;

    computeResourceRpTraversalSpec.selectSet is new SelectionSpec [] {new SelectionSpec()};.

    computeResourceRpTraversalSpec.selectSet [0] .name = "resourcePoolTraversalSpec";

    Tie a ComputeResource to a host.

    TraversalSpec computeResourceHostTraversalSpec = new TraversalSpec();

    computeResourceHostTraversalSpec.name = "computeResourceHostTraversalSpec";

    computeResourceHostTraversalSpec.type = "ComputeResource;

    computeResourceHostTraversalSpec.path = 'Home';

    computeResourceHostTraversalSpec.skip = false;

    Sleepers of a data center to the host root folder.

    TraversalSpec datacenterHostTraversalSpec = new TraversalSpec();

    datacenterHostTraversalSpec.name = "computeResourceHostTraversalSpec";

    datacenterHostTraversalSpec.type = 'Center ';

    datacenterHostTraversalSpec.path = "hostFolder";

    datacenterHostTraversalSpec.skip = false;

    datacenterHostTraversalSpec.selectSet is new SelectionSpec [] {new SelectionSpec()};.

    datacenterHostTraversalSpec.selectSet [0] .name = "folderTraversalSpec";

    Sleepers of a computer data center virtual root folder.

    TraversalSpec datacenterVmTraversalSpec = new TraversalSpec();

    datacenterVmTraversalSpec.name = "datacenterVmTraversalSpec";

    datacenterVmTraversalSpec.type = 'Center ';

    datacenterVmTraversalSpec.path = "vmFolder";

    datacenterVmTraversalSpec.skip = false;

    datacenterVmTraversalSpec.selectSet is new SelectionSpec [] {new SelectionSpec()};.

    datacenterVmTraversalSpec.selectSet [0] .name = "folderTraversalSpec";

    Crossings between a host and a virtual machine.

    TraversalSpec hostVmTraversalSpec = new TraversalSpec();

    hostVmTraversalSpec.name = "hostVmTraversalSpec";

    hostVmTraversalSpec.type = "HostSystem;

    hostVmTraversalSpec.path = "vm".

    hostVmTraversalSpec.skip = false;

    hostVmTraversalSpec.selectSet is new SelectionSpec [] {new SelectionSpec()};.

    hostVmTraversalSpec.selectSet [0] .name = "folderTraversalSpec";

    Crossings between a host and a virtual machine.

    TraversalSpec folderTraversalSpec = new TraversalSpec();

    folderTraversalSpec.name = "folderTraversalSpec";

    folderTraversalSpec.type = "folder";

    folderTraversalSpec.path = "childEntity";

    folderTraversalSpec.skip = false;

    folderTraversalSpec.selectSet = new SelectionSpec [] {}

    new SelectionSpec(),

    new SelectionSpec(),

    new SelectionSpec(),

    new SelectionSpec(),

    new SelectionSpec(),

    new SelectionSpec(),

    new SelectionSpec()};

    folderTraversalSpec.selectSet [0] .name = "folderTraversalSpec";

    folderTraversalSpec.selectSet [1] .name = "datacenterHostTraversalSpec";

    folderTraversalSpec.selectSet [2] .name = "datacenterVmTraversalSpec";

    folderTraversalSpec.selectSet [3] .name = "computeResourceRpTraversalSpec";

    folderTraversalSpec.selectSet [4] .name = "computeResourceHostTraversalSpec";

    folderTraversalSpec.selectSet [5] .name = "hostVmTraversalSpec";

    folderTraversalSpec.selectSet [6] .name = "resourcePoolVmTraversalSpec";

    ObjectSpec [] obSpec = new ObjectSpec [] {new ObjectSpec()};

    .obj obSpec [0] = startObj;

    obSpec [0] .skip = false;

    obSpec [http://0].selectSet ] = new SelectionSpec [| ] http://0].selectSet = new SelectionSpec [] { }

    folderTraversalSpec,

    datacenterVmTraversalSpec,

    datacenterHostTraversalSpec,

    computeResourceHostTraversalSpec,

    computeResourceRpTraversalSpec,

    resourcePoolTraversalSpec,

    hostVmTraversalSpec,

    resourcePoolVmTraversalSpec};

    PropertyFilterSpec pFSpec = new PropertyFilterSpec();

    pFSpec.propSet = new PropertySpec [] ;

    pFSpec.objectSet = obSpec;

    Return pFSpec;

    }

    I hope someone can give me a hint, it takes days already.

    Try if it works.

    Rajesh Kamal

    /**

    • This method creates a SelectionSpec [] to traverse all of the

    • inventory starting at a folder tree

    • @return the [of SelectionSpec]

    */

    public SelectionSpec [] buildFullTraversal()

    {

    Recurse through all ResourcePools

    TraversalSpec rpToVm = new TraversalSpec();

    rpToVm.name = "rpToVm";

    rpToVm.type = "ResourcePool;

    rpToVm.path = "vm".

    rpToVm.skip = false;

    rpToVm.skipSpecified = true;

    Recurse through all ResourcePools

    TraversalSpec rpToRp = new TraversalSpec();

    rpToRp.name = "rpToRp";

    rpToRp.type = "ResourcePool;

    rpToRp.path = "resourcePool;

    rpToRp.skip = false;

    rpToRp.skipSpecified = true;

    rpToRp.selectSet is new SelectionSpec [] {new SelectionSpec(), new SelectionSpec()};.

    rpToRp.selectSet [0] .name = "rpToRp";

    rpToRp.selectSet [1] .name = "rpToVm";

    Crossing through branch ResourcePool

    TraversalSpec crToRp = new TraversalSpec();

    crToRp.name = "crToRp";

    crToRp.type = "ComputeResource;

    crToRp.path = "resourcePool;

    crToRp.skip = false;

    crToRp.skipSpecified = true;

    crToRp.selectSet is new SelectionSpec [] {new SelectionSpec(), new SelectionSpec()};.

    crToRp.selectSet [0] .name = "rpToRp";

    crToRp.selectSet [1] .name = "rpToVm";

    Crossing by the host branch

    TraversalSpec crToH = new TraversalSpec();

    crToH.name = "crToH";

    crToH.type = "ComputeResource;

    crToH.path = 'Home';

    crToH.skip = false;

    crToH.skipSpecified = true;

    Crossing through hostFolder branch

    TraversalSpec dcToHf = new TraversalSpec();

    dcToHf.name = "dcToHf";

    dcToHf.type = 'Center ';

    dcToHf.path = "hostFolder";

    dcToHf.skip = false;

    dcToHf.selectSet is new SelectionSpec [] {new SelectionSpec()};.

    dcToHf.selectSet [0] .name = "visitFolders";

    Crossing through vmFolder branch

    TraversalSpec dcToVmf = new TraversalSpec();

    dcToVmf.name = "dcToVmf";

    dcToVmf.type = 'Center ';

    dcToVmf.path = "vmFolder";

    dcToVmf.skip = false;

    dcToVmf.skipSpecified = true;

    dcToVmf.selectSet is new SelectionSpec [] {new SelectionSpec()};.

    dcToVmf.selectSet [0] .name = "visitFolders";

    Through all the hosts

    TraversalSpec HToVm = new TraversalSpec();

    HToVm.name = "HToVm";

    HToVm.type = "HostSystem;

    HToVm.path = "vm".

    HToVm.skip = false;

    HToVm.skipSpecified = true;

    HToVm.selectSet is new SelectionSpec [] {new SelectionSpec()};.

    HToVm.selectSet [0] .name = "visitFolders";

    Recurse Suiloidi records

    TraversalSpec visitFolders = new TraversalSpec();

    visitFolders.name = "visitFolders";

    visitFolders.type = "folder";

    visitFolders.path = "childEntity";

    visitFolders.skip = false;

    visitFolders.skipSpecified = true;

    visitFolders.selectSet is new SelectionSpec [] {new SelectionSpec(), new SelectionSpec(), new SelectionSpec(), new SelectionSpec(), new SelectionSpec(), new SelectionSpec(), new SelectionSpec()};.

    visitFolders.selectSet [0] .name = "visitFolders";

    visitFolders.selectSet [1] .name = "dcToHf";

    visitFolders.selectSet [2] .name = "dcToVmf";

    visitFolders.selectSet [3] .name = "crToH";

    visitFolders.selectSet [4] .name = "crToRp";

    visitFolders.selectSet [5] .name = "HToVm";

    visitFolders.selectSet [6] .name = "rpToVm";

    return new SelectionSpec [] {visitFolders, dcToVmf, dcToHf, crToH, crToRp, rpToRp, HToVm, rpToVm};

    }

  • examples of write a batch of pourcopier program file

    I would like to see an example of a batch program writing to copy a file.  I know that can use Notepad and save it as bat.  I can not getn the

    program to run.  Also how to make an executable program.  I would like to see an example of end-to-end.

    Than k you

    Mary

    Mary,

    1 modify it a bit: -.

    xcopy c:\users\mary\documents\tesing123.docx j:\

    This will stop the system will ask to confirm if it is a file or a folder name that you are copying to.  The name is not necessary after the J:\ that you do not change the name at all.

    This may not be the main problem, but it would cause the batch file just to hang waiting for a response on your part.

    - - - - - - - -

    2 are you sure the file is called tesing123.docx rather than tesing 123. docx [with a space] or even testing123.docx?

    - - - - - - - - -

    3.1 to see what goes wrong, open a command prompt & paste the

    xcopy c:\users\mary\documents\tesing123.docx j:\

    order in.

    This will generate an error report that should help sort out what goes wrong.  Write it down & post here.

    3.2 to open a command prompt, type cmd in the search box of the start menu & click the cmd.exe shortcut that is offered.

    3.3 copy the text of the order from the top, or your batch file [you can open it with Notepad to edit & for the copy - just make a right click on the batch file and select Edit for you there].

    3.4 the command paste in the command prompt by clicking the small C:\ black icon in the upper left of the command prompt window and then hovering over the word change & then click Paste form the submenu that appears.

  • keep the program, stop the office pop up at the beginning upward

    keep the program, stop the office pop up at the beginning upward. I removed Skype because it came with start-up. I have Hp dock or something that is close to files on my desktop. Same thing with Cannon. I'm tired of "xing"off each time it starts. "

    I moved your post to Windows | Programs where it will receive more targeted attention. I can't determine which version of Microsoft Windows you are using, so I try to make these generic instructions in nature.

    Start by typing the Windows key + r Type or paste in msconfig and click OK in. When the applet opens, you will find all the programs that starts with windows on Startup as well as their location of registry tab or the program folder. Simply uncheck all that you want to remove the review. While you're here, take careful consideration to everything you think you can do without. This area is usually grossly overcrowded with utilities and unused software.

    Changes will not take place until the computer is restarted, for example to uncheck a program won't stop him. It simply prevents starting the next time Windows is started.

    Further examination of all the things that start automatically is probably through a small utility called Autoruns program (Yes, that's plural) from Windows Sysinternals. You can get a copy here:


    Autoruns for Windows

  • broadcast another program through labview

    Hello

    I have a question

    is it possible to broadcast another program through LabVIEW?

    for example, I run a program in my computer, is it possible to have the remote people to look at how the program runs through the Internet and LabVIEW?

    Thank you

    Cynitha

    Yes and no.

    Yes - if you are showing them how to use a VI that you configured as a server, they can watch using remote façade. There are also (limited) ActiveX controls that allow you to use external applications in LabVIEW, IE: Word, Excel, WMP, etc.

    No - if there is no involved VI, you want to just show them a random program, you can simply use Remote Desktop connection. Click Start > programs > Accessories > Remote Desktop Connection, its fairly explicit use.

  • example of Modbus ethernet

    Hello guys,.

    I use Labview Application Builder to create a program exe based on MB Ethernet example Slave.vi, but it can not communicate with MB Ethernet example Master.vi correctly, prior to construction, original slave and master example programs can communicate well, but after stabilizing MB Ethernet example Slave.vi exe program, these two don't work the way you want, is there anyone faced this problem before?  Maybe some configeration need to be addressed during construction.

    Thank you very much.

    Coolbear,

    There are a few screws called dynamically inside the NI Modbus Toolbox.

    Just include any Toolbox in your application, and everything is going to be screwed up:

    Test in attacment project (assume that you have installed the toolkit from here)

    Andrey.

  • How to program several conditions 'if '?

    Hello

    Could someone please tell me or give an example of how .vi program cases of simple comsprison:

    I have a cycle FOR which iterated within 300 to 800. I need to do different tasks when the iteration becomes 400, 500, 600 and 700. How it's simpler and more beautiful?

    Thanks in advance.

    Use a case structure and the number of thread for the selector of the case. Now, to make case

    1. ... 299 (default)
    2. 300.399
    3. 400.499.
    4. 500.599
    5. 600.699
    6. 700...

    See how far you get.

    This assumes that you want to move to a different task and keep until the next level.

    (If you want to make another request only specific unique iterations, you'd only numer one case, of course.) Your descriptions can be interpreted both ways, it is not entirely clear).

  • program called by a program does not run it go to the taskbar.

    I have a program that calls a Visual basic program. In this example visual basic XP program would open and run. Windows 7 visual basic executes the program, but I have to the task bar and click on it.

    How can I get the Visual basic program is displayed without having to go to the task bar?

    Hello occprinterman,

    Have you tried to use the Task Scheduler?

    Find out information from the Microsoft Web site.
    http://Windows.Microsoft.com/en-us/Windows7/schedule-a-task

    I hope this helps.

    Sincerely,

    Marilyn
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think

  • I can't install any programs. error 2503, 2502

    Hello
    I have windows 7 os. the problem is that I can't install almost any program. as an example, I download a program, I'm beginning to "run" it and at the end when left a few seconds the installation stops and I get an error table - "Setup has encountered an unexpected error installing this package. The error code is 2503 ". And after this one, I get second error table - "Setup has encountered an unexpected error installing this package. This may indicate a problem with this package. The error code is 2502 ".
    And I with update of adobe reader is the same. I can not install updates.

    Try this

  • examples of libimg (img_convert_data)?

    I try to use libimg to load and display an image. It is the work of 3/4. Specifically, the image is at RGB888 format, and the Cascades ImageData object RGBX, if I get a fresh crushed and somewhere between mono effect and color.

    I try to use img_convert_data() to convert the data, but it doesn't seem to do anything. The destination buffer that I spell him unchanged. If I memset 0xD0 buffer before calling img_convert_data(), then the image is displayed as a gray solid. img_convert_data() returns IMG_ERR_OK, so I don't even have a mistake to work with...

    An abbreviated version of what I have is:

    img_t img;

    img_format_t new_format = IMG_FMT_RGBA8888;

    uint8_t * new_data;

    size_t new_bpl;

    int rc;

    RC = img_load_file (ilib, filename, NULL, &img);)

    new_bpl = IMG_FMT_BPL (new_format, img.w);

    new_data = (uint8_t *) malloc(new_bpl * img.h);

    RC = img_convert_data (img.format, img.access.direct.data, new_format, you see, N);

    I tried some numbers for N ("the number of samples to convert"), because I do not know what is required. 1 does not work, does not img.h, new_bpl * img.h segfaults...

    What Miss me?

    Hey, I'm working on this picture library on QNX. The problem you are having is that you pass in the number of bytes to img_convert_data() instead of the number of 'samples' that is, pixels. For example, IMG_FMT_RGBA8888 has four bytes per pixel, so you ask to convert four times more data is present.

    I tried my best to reproduce your example with the following program:

    #include 
    #include 
    #include 
    #include 
    
    #include 
    
    int main(int argc, char ** argv)
    {
    
        if (argc != 2) {
            printf("Usage: %s [filename]\n", argv[0]);
            printf(" e.g. %s /path/to/some/photo.jpg\n", argv[0]);
            return 1;
        }
    
        // attach image library (loads codecs)
        img_lib_t ilib;
        int rc = img_lib_attach(&ilib);
        if (rc != IMG_ERR_OK) {
            printf("img_lib_attach() failed: %d\n", rc);
            return 1;
        }
    
        // load image
        img_t img;
        memset(&img, 0, sizeof(img_t));
        // I'm putting this here to make sure I already have an RGB image to convert up to RGBA later
        img.format = IMG_FMT_RGB888;
        img.flags |= IMG_FORMAT;
        rc = img_load_file(ilib, argv[1], NULL, &img);
        if (rc != IMG_ERR_OK) {
            printf("img_load_file() failed: %d\n", rc);
            return 1;
        }
        printf("img_load_file() succeeded\n");
    
        // convert image
        img_format_t new_format = IMG_FMT_RGBA8888;
        size_t new_bpl = IMG_FMT_BPL(new_format, img.w);
        uint8_t * new_data = malloc(new_bpl * img.h);
        rc = img_convert_data(img.format, img.access.direct.data, new_format, new_data, img.h * img.w);
        if (rc != IMG_ERR_OK) {
            printf("img_convert_data() failed: %d\n", rc);
            return 1;
        }
        printf("img_convert_data() succeeded\n");
    
        return 0;
    }
    

    I tested with a PNG that I and the conversion worked successfully.

    In general, it's probably more idiomatic to specify the destination format before loading the image to let the img lib to do the conversion for you. The advantage is that the img_t will be updated with the data, as well as good stride, format indicators, etc.

    Chris

  • Plan a program runs after a specific time period

    I'm trying to run a program after the expiration of a period of time.
    FOR EXAMPLE.  I start 'Program A' and after that some time passed (say 10 min) then I want to "Program B" to open and run.

    Thank you very much

    Geo1941

    Hello

    Thanks for posting in the Microsoft community

    From your problem description, I understand that you want to schedule a task one after the other. Please let me know if you do not experience this problem.

    In Windows 7, we have a tool called as Scheduler tasks. I suggest you schedule a task to run automatically.

    Schedule a task (to schedule a task to run automatically when the computer starts)
    http://Windows.Microsoft.com/en-us/Windows7/schedule-a-task

    Hope this information is helpful and let us know if you need help with Windows in the future. We will be happy to help.

  • what needs the permission of files program be on?

    Hey guys... every time I have to install an application on my windows 7, you can run it at first, but when I shutdown my laptop and turn it on, I cannot open the file: it is said there is a problem of permission, access denied (or something like that)... so what I do is go the the folder and double click on it I wonder if I want to take the permission, or just go and take in hand the folder... I was wondering is there any solution for this? my permission to files 86 current program has value: everybody... but my program files is set to: users, authenticated users, System...

    can I change the permissions on the program 86 files in order to solve this problem and if so, what can change to?
    and btw, im an administrator
    Thanks in advance

    Except if you were juggling permissions in a first step, that this type of problem should not occur with any program compatible win7 (some programs will throw sometimes until a glych, for example MS Office)

    Program files & Programs (x 86) should have the same parameters

  • Anyway is to free up the CPU usage by removing unnecessary programs, of a plant to buy computer?

    Anyway is to free up the CPU usage by removing unnecessary programs, of a plant to buy computer?

    • For example, help Hp or programs of this type.

    To determine what is using the CPU more...

    CTRL + SHIFT + ESC to open the Task Manager

    Click on the header of the CPU until the processes that are using most of the CPU are grouped in the upper part.

    As a general rule, the upper entrance should be System Idle around 96-97%.

    So, what are your three high entries on the page?

  • IntelliPoint 8.20.468.0 problem with the specific parameters of the program on Windows 8

    I have a Microsoft Wireless Laser Mouse 7000 on Windows 8 Pro with Intellipoint 8.20.468.0 and the specific parameters of the program to set up the rear push button to a combination of keys ("for example, ' t '), for various programs.  If you leave the home page so that this 'Back' button (by default), this setting DOES NOT WORK.  The specific setting of the program is IGNORED.  If you set the homepage to anything else (for example, "previous window") then the program specific setting works.  It wasn't a problem on Windows 7 with 8.2 Intellipoint.

    Any ideas.

    Anyone know how to file a bug report - I couldn't see how to file a.

    Neil H. Currie

    I have a Microsoft Wireless Laser Mouse 7000 on Windows 8 Pro with Intellipoint 8.20.468.0 and the specific parameters of the program to set up the rear push button to a combination of keys ("for example, ' t '), for various programs.

    Have you tried to download Microsoft Mouse and keyboard Center?   Which has replaced the former IntelliPoint and IntelliType support tool.   In fact, I think it would be listed in Windows Update as optional updates.

    HTH

    Robert Aldwinckle
    ---

  • Re-download programs Adobe After reset PC

    Hey guys, I downloaded adobe master suite of college but my pc got unwanted programs and I need to reset. By doing this I will be remove my adobe programs and I no longer go to College that allowed me to recover my programs, does anyone know if adobe can help with this sort of thing for example download the adobe programs?

    You can download from adobe, but your license (IE, serial number) cannot work with the installation of your school files:

    Available downloadable Setup files:

    Download and installation help links Adobe

    Help download and installation to Prodesigntools links can be found on the most linked pages.  They are essential; especially steps 1, 2 and 3.  If you click on a link that does not have these listed steps, open a second window by using the link to Lightroom 3 to see these "important Instructions".

Maybe you are looking for