Example of test bench for several elements of e/s FPGA

Similar Questions

• Test bench for myDAQ

  Hi all

  I'm designing a test bench for myDAQ, I implemented using a test of VI for each function in the model of test bench and in the end, I write all these results in a word file. In fact, there is not any specific problem I want that the community please check this test if it needs any improvement specifically to report.

  Thanks in advance for your help and time.

  Concerning

  Omer

  To see a picture (or save) in the largest size, just right click on it with your mouse and click on the first option in Firefox (see the photo or something).

  I am also attaching the control of typedef in 2013 version. BTW, you should use a project, LabVIEW, for your main VI and typedef controls in one place.

  For example, if adding items to your control of the typedef:

  

  Unbundle the cluster for the creation of report:

  

  EDIT: finished the missing parts and wires for your VI.

• Knowledge check test slide for several controls of knowledge

  Hello

  I created a series of pools quesiton. I have 9 knowledge controls in my project which are questions from a pool of quesiton randon.

  At the end of each audit knowledge, I want to display a page of results of "quiz". When I select this option in Quiz preferences, it displays only a slide of result after the FINAL knowledge control.

  Is it possible to have a review after each audit knowledge?

  Your help is greatly appreciated!

  Susan

  It will be not possible with normal question slides, because only the recovery feature clear responses and it will always be the whole of the quiz.

  If you want to use the question slides, because you find it too cumbersome to create custom question slides, for now I don't see a solution with multiple files of Captivate: each audit of knowledge must be a different file, where you can add the possibility of recovery. If you want to see all the results in the main file (who called knowledge small check files), you will need to use JavaScript or the widget Save & Load Data from Michael Lund (cpguru).

  Lilybiri

• How to trigger the test bench to assign the stage = error

  Hi all, I have a LabVIEW VI my sequence step and I have a button give up the user can choose to interrupt the UI VI.  I want the button "Cancel" boolean to pass back to test stand this button drop = TRUE and I want to step in the sequence must be set to "ERROR".  Y at - it a command to send to the engine test bench to mark this milestone as an error?

  Thank you very much!

  Hello

  You can use the following APIs to set the result of your efforts.

  RunState. PreviousStep.Result.Status = 'Error' - this function will set the status of the previous step.

  You can use a stage of "Power adapter" (comes with TestStand), set the result of the previous step using the expression above. You can set a precondition for this step to run only if the Abort button = True.

  or

  runstate.step.Result.Status = 'Error' - this function will set the status for the current stage.

  There are also other values that you can pass for example of 'Success', 'Failure' and 'Jumped'

  I hope this helps!

  Deepak

• Type a table defined clusters to hold configuration data - definition of default values for each element of the array

  Hello

  I was wondering if I could get some information and opinions on the use of an array of type defined clusters to store configuration data.  I am creating a program to test several EHR and wanted to have a control of type defined for each HAD with the information needed to create the DAQmx tasks for all signals for it must HAVE.  I am eager to do so that the data are encoded in hard and not in a file that the user might spoil.

  Controls of type def are then put into a Subvi who chooses as appropriate, one based on the enumeration of Type DUT connected to a case structure.

  I have problems with the control of the defined type.  I see issues when you try to save a configuration unique to each element of the array in the array of clusters.  Somehow, it worked at first, but now by clicking on "Operations on the data--> default font of the current value ' on individual elements of the cluster or the entire cluster (array element) does not save data when I re - open the command def.  What I am doing wrong?  I'm trying to do something with the berries of the clusters that I shouldn't do?

  I enclose one of the defined reference type controls.  I tried to change it bare to see if that helped, but no luck.

  To reproduce, change the resource string for the element 0 of the array and do the new value by default.  Then close the def of type, and then reopen it.  The old value is always present in this element.  The VI is saved in LabVIEW 2012.

  The values of a typedef are not proprigated to the instances of the control. They get if created WHEN data values have changed. They will be not updated with the changes to come. You must create a VI specifically to hardcode your values or to implement a file based initialization. The base file would be much better and more flexible. If you don't want users to change the data simply encryption. There is a wedding blowfish library that you can download.

• I downloaded and used a test of Lightroom, several days ago.  I've used and have a library, but now, when I try to use it today, my pictures seem to be there in the library but when I try to start working on a new picture, I get a "file not found messages

  I downloaded and used a test of Lightroom, several days ago.  I've used and have a library, but now, when I try to use it today, my pictures seem to be there in the library but when I try to start working on a new picture, I get a ' file not found message.»  How can I go back in my files?

  There are a number of options available when you choose to import files to your catalog in Lightroom (library)

  1 copy / copy as DNG, this option allows you to copy files of origin from their existing location, for example a folder on an existing, promenade, internal, external, a reader of card or a camera SD card connected to the computer via a USB port, to a location of your choice, in a folder of a HARD internal, external HARD disk drive or a network drive on your choice.

  2. move. This option allows you to move files of origin of their location, for example a folder on an existing drive, internal or external to a new location of your choice, in a folder of a drive HARD internal, external HARD disk or a network drive on your choice. (the Move option you cannot move files from a card or your camera.)

  3. ADD., this option allows you to add image files to the catalog of their location, for example a folder on an existing drive, internal, external or network drive and the original images remain in their current location.

  The original image file will be located at the location of your choice.

  There are no image files in your catalog (or library) file the original files are in the location you choose.

  If you choose to add files to your catalog from an external drive, then unplug the player from your computer, then Lightroom which will show the 'file not found '.

• How to config a cache shared for several environments with the C API

  How to config a cache shared for several environments with C API?  Like Java edition. Chapter 2. Database environments

  I want to open the large number of databases, at least 10,000. But as the counties of open databases increase, the db-> open become very slow operation. It took almost 2 hours for 10 000 databases.

  So I try to distribute these databases on multiple environments (for example, 5 envs). And to improve the efficiency of memory use, I want to share cache between ENVS.

  Hello

  We do not support the cache sharing between different environments as you mentioned.

  We have tested the case of the opening of 100 000 databases, see the number that you have encountered, we will check what is happening.

  Kind regards

  Winter, Oracle Berkeley DB

• Creation of test data for a problem

  Hello
  
  I use this forum for a few months and it has been extremely helpful. The problem is that I really have no idea how to create some test data for a specific problem. I tried Googling, but to no avail. I had other users to create data test for some of my problems using a 'WITH' statement, but it would be great if someone could explain the logic behind it and how to address a specific problem where in the application, I use several tables.
  
  I know this is probably a stupid question and I'm relatively new to sql, but it would help a lot if I understand the process.
  
  Banner:
  Oracle Database 11 g Release 11.2.0.2.0 - 64 bit Production
  PL/SQL Release 11.2.0.2.0 - Production
  "CORE 11.2.0.2.0 Production."
  AMT for Linux: Version 11.2.0.2.0 - Production
  NLSRTL Version 11.2.0.2.0 - Production

  WITH construction is known as factoring request void.

  http://download.Oracle.com/docs/CD/E11882_01/server.112/e26088/statements_10002.htm#i2077142

  (Not easy to find unless you know what it's called)

  It allows you to start your request with a sub request which acts as a view definition that can then be used in your main query, just like any other view or a table.

  This example declares two views on the fly - master_data and detail_data, which are then used in the example query. Each query sub emulates the data in the table by selecting literal values in the dual table a line using union all to generate multiple lines.

  The two queries shows different results when an outer join is used in the second (+) {noformat} {noformat}

  SQL> -- test data
  SQL> with
    2      master_data as
    3      (
    4      -- this query emulates the master data of a master detail query
    5      select 1 id, 'Header 1' description from dual union all
    6      select 2 id, 'Header 2' description from dual union all
    7      select 3 id, 'Header 3' description from dual union all
    8      select 4 id, 'Header 4' description from dual
    9      ),
   10      detail_data as
   11      (
   12      -- this query emulates the detail data of a master detail query
   13      select 1 id, 1 detail_id, 'Detail 1.1' description from dual union all
   14      select 1 id, 2 detail_id, 'Detail 1.2' description from dual union all
   15      select 1 id, 3 detail_id, 'Detail 1.3' description from dual union all
   16      select 2 id, 1 detail_id, 'Detail 2.1' description from dual union all
   17      select 2 id, 2 detail_id, 'Detail 2.2' description from dual union all
   18      select 2 id, 3 detail_id, 'Detail 2.3' description from dual union all
   19      select 2 id, 4 detail_id, 'Detail 2.4' description from dual union all
   20      select 4 id, 2 detail_id, 'Detail 4.2' description from dual union all
   21      select 4 id, 3 detail_id, 'Detail 4.3' description from dual
   22      )
   23  -- main query
   24  -- to select from test data
   25  select
   26      m.description,
   27      d.description
   28  from
   29      master_data m,
   30      detail_data d
   31  where
   32      m.id = d.id
   33  order by
   34      m.id,
   35      d.detail_id;
  
  DESCRIPT DESCRIPTIO
  -------- ----------
  Header 1 Detail 1.1
  Header 1 Detail 1.2
  Header 1 Detail 1.3
  Header 2 Detail 2.1
  Header 2 Detail 2.2
  Header 2 Detail 2.3
  Header 2 Detail 2.4
  Header 4 Detail 4.2
  Header 4 Detail 4.3
  
  9 rows selected.
  
  SQL> edi
  Wrote file afiedt.buf
  
    1  with
    2      master_data as
    3      (
    4      -- this query emulates the master data of a master detail query
    5      select 1 id, 'Header 1' description from dual union all
    6      select 2 id, 'Header 2' description from dual union all
    7      select 3 id, 'Header 3' description from dual union all
    8      select 4 id, 'Header 4' description from dual
    9      ),
   10      detail_data as
   11      (
   12      -- this query emulates the detail data of a master detail query
   13      select 1 id, 1 detail_id, 'Detail 1.1' description from dual union all
   14      select 1 id, 2 detail_id, 'Detail 1.2' description from dual union all
   15      select 1 id, 3 detail_id, 'Detail 1.3' description from dual union all
   16      select 2 id, 1 detail_id, 'Detail 2.1' description from dual union all
   17      select 2 id, 2 detail_id, 'Detail 2.2' description from dual union all
   18      select 2 id, 3 detail_id, 'Detail 2.3' description from dual union all
   19      select 2 id, 4 detail_id, 'Detail 2.4' description from dual union all
   20      select 4 id, 2 detail_id, 'Detail 4.2' description from dual union all
   21      select 4 id, 3 detail_id, 'Detail 4.3' description from dual
   22      )
   23  -- main query
   24  -- to select from test data
   25  select
   26      m.description,
   27      d.description
   28  from
   29      master_data m,
   30      detail_data d
   31  where
   32      m.id = d.id (+)
   33  order by
   34      m.id,
   35*     d.detail_id
  SQL> /
  
  DESCRIPT DESCRIPTIO
  -------- ----------
  Header 1 Detail 1.1
  Header 1 Detail 1.2
  Header 1 Detail 1.3
  Header 2 Detail 2.1
  Header 2 Detail 2.2
  Header 2 Detail 2.3
  Header 2 Detail 2.4
  Header 3
  Header 4 Detail 4.2
  Header 4 Detail 4.3
  
  10 rows selected.
  

• Data storage of the optical spectrum for several points and recalling a specific

  Hi, I'm working on an installation of measurement of the optical spectrum automated for a summer project, I have been using labview for about a week now and have had bases for stage motor control, but I have problems with the data management...

  I'm looking to store data such as those acquired with an optical spectrum for several XY points Analyzer and recall the optical spectrum for a specified point? Currently, I am looking at writing to the file of measure and reading of the measures such as the options file, but I'm not sure how to name each piece and the data and to recall them correctly. Are there examples where this has been done? any help will be greatly appreciated.

  I use a connect Yokogawa AQ6370 via ethernet, LabVIEW drivers are provided for this, but I can't find the screws provided here is

  Thank you very much

  Asiri

  Not clear? Ask at your

• Link to serial number USE of test bench with a labview VI

  Hello

  I want to use the number of input series to USE test bench in one of the labview VI of in my sequence so that I can output a few numbers in a spreadsheet, and they include the serial number of the object to measure. Is there a way to link the 2?

  Chris

  (See the attached example)

  Hello

  You can get your serial number using the following search string "RunState.Caller.Locals.UUT.SerialNumber".

  There is an example on the following link:

  http://forums.NI.com/NI/board/message?board.ID=330&message.ID=6938&query.ID=198397#M6938

  Hope this helps

  Concerning

  Ray Farmer

• Setting permissions for several files at once

  I'm sure this has been asked here, but I'm not (although I have seen that it is claimed for several years on various forums around the Internet with zero answers concrete)...

  I use to be able to grant everyone | full control on several files at once, but for some reason that is completely beyond me, 7 (and as I read it, it's from vista forward) does not display the Security tab so I have to grant permissions one by one.

  It goes without saying, but I will anyway, it's silly.  There is no 'improvement' if it is more difficult, so I have to say that I don't see anything beneficial as to why this was changed.

  Is that it will be restored to how it was before and if not, why?  I'm not a programmer, so I won't make all orders or I will visit the group permissions or whatever.

  I want to be able to select multiple files/folders at the same time and grant permissiong in 2 clicks of the mouse.

  Feasible?  Or this function a round permanantly filed because someone thinks they've created something better?

  Here are a few options:

  • If permissions should affect all the files in a folder: apply the permissions in the whole file.
  • If the permissions should affect only some files in a folder: temporarily move the files in a folder that is clean, then apply permissions to this folder. Now, move the files to return whence they came.
  • If the file names can be treated with a wildcard character, for example * .jpg: use cacls.exe to command prompt to set the permissions.

• Cannot install update 13.1 for Photoshop Elements

  When you try to install the update 13.1 for Photoshop Elements, I got the following error code: U44M1I210. Have tried several times

  in fact, none of these links are useful.

  even if it's cc updated, it applies to PES 13 updated, too: error U44M1I210 | Install updates

• I bought Photoshop Elements by accident, I can return it for Premiere Elements?

  I bought Photoshop Elements by accident, I can return it for Premiere Elements? I placed my order a few minutes ago. I realized that I had bought Photoshop Elements by accident during my test of Premiere Elements would not accept my series. I really hope I can return this license, please help.

  CSO

  It's not Adobe, instead of a user to.

  Adobe is the only one to solve your problems of orders.

  Instructions are available

  https://helpx.Adobe.com/x-productkb/policy-pricing/return-cancel-or-change-order.html

  I suggest generally online Adobe Chat in order to solve the problem.

  Contact the customer service

  First Elements

  Payment of membership, account,

  Payments, invoices, orders

  Panel discussion

  If the link does not take his game, then you will need navigate Panel cat using securities above as a guide.

  Two paths to the orders ends probably in the same place.

  Please let us know the result as your time permits.

  Thank you.

  RTA

• Encryption with dbms_crypto does not correspond to vectors of tests published for OFB mode

  Hello

  I use the dbms_crypto package in Oracle Express 11.2 I am trying to see that changes of encryption according to the "operating mode".  For reference, I used vectors of tests published on the web site: AES Test vectors I used these test vectors for a while with several languages such as Python PyCrypto and have generally found the information on this page to be reliable.

  When you try to use the BBA (output feedback mode) with AES256 encryption, I get a result that does not match the name on the web site of Test vectors.  Curiously, the result I get when using BBA mode matches the indicated result on the vector of Test for the ECB mode Web site, and in fact, if I use dbms_crypto ECB mode I get the same result. (If I try the CBC mode, I get the result the CBC matches appear on the web site of Test vectors).

  This suggests that when you specify the OFB mode in the call to dbms_crypto.encrypt, it's actually using ECB instead.

  I'm happy to share my code with someone who is interested.  I have not write it here now, though. It's pretty simple.  I use to set the mode,

  l_mod	NUMBER: = dbms_crypto. ENCRYPT_AES256
  	+ dbms_crypto. CHAIN_OFB
  	+ DBMS_CRYPTO. PAD_NONE;

  very similar to the Oracle documentation on this topic.

  Thanks for your interest,

  Norbert Kremer

  Hi Norbert,.

  Please report to us that I did a quick test on versions Enterprise Edition 11.2.0.3 and the 12.1.0.1.0, the 12 c seems to be OK, but 11.2.0.3 has a problem:

  Using the first vector to test for the OFB 256 - bit AES encryption mode

  Encryption key: 603deb1015ca71be2b73aef0857d77811f352c073b6108d72d9810a30914dff4

  Initialization vector, ciphertext Test vector

  6bc1bee22e409f96e93d7e117393172a dc7e84bfda79164b7ecd8486985d3860 000102030405060708090A0B0C0D0E0F

  Result:

  Connected to:

  Oracle Database 11 g Enterprise Edition Release 11.2.0.3.0 - 64 bit Production

  With the partitioning option

  SQL > @ofb

  Result: F3EED1BDB5D2A03C064B5A7E3DB181F8

  Expected: dc7e84bfda79164b7ecd8486985d3860

  PL/SQL procedure successfully completed.

  Connected to:

  Database Oracle 12 c Enterprise Edition Release 12.1.0.1.0 - 64 bit Production

  With the options of partitioning, OLAP, advanced analytics and Real Application Testing

  SQL > @ofb

  Result: DC7E84BFDA79164B7ECD8486985D3860

  Expected: dc7e84bfda79164b7ecd8486985d3860

  PL/SQL procedure successfully completed.

  I'll file a bug for this issue shortly and put you here,

  Greetings,

  Damage ten Monkshood

• Now that we have liquid, is there a better way to make an Alphabet for Webapp elements filter when you have more than 500 Articles?

  Now that we have liquid, is there a better way to make an Alphabet for Webapp elements filter when you have more than 500 Articles?

  I am using the JQuery ListNav, but my webapp now has too many items.  Liquid filter by chain to make a filter of the alphabet?

  {module_webapps id = "16734" filter = 'all' template="/Layouts/WebApps/Applications/dashboard-list-a.tpl' = 'collection' render}

  What else can I use in the parameter 'filter '?

  Thank you!

  Shannon

  Udemy as a tutorial on it. Practical examples of liquid for Adobe Business Catalyst markup . It was called list Rolodex. This is the solution you want.