Example: Pavilion 15 p077tx: relocation hp pilot after a clean install of windows 7 Windows 8.1

Hello

I HAV laptop p077tx and has recently done a new install of windows 7. Now I have a problem with the internet connection. Since all formatted, nothing to install the network driver. Please post a direct link that I can download... Thanks in advance...

Hello:

You need these drivers wireless and bluetooth...

This package contains the Broadcom Wireless LAN driver that is required to activate the LAN adapter wireless Broadcom integrated in the laptop models running a supported operating system. This package also contains the Broadcom Wireless Utility application.

File name: sp69014.exe

The package contains the Broadcom bluetooth driver and software for the laptop models running a supported operating system. Broadcom Bluetooth 4.0 driver is required to activate the bluetooth 4.0 Broadcom devices and is compatible with Broadcom bluetooth 3.0 and earlier versions.

File name: sp66402.exe

If you need driver ethernet (wired), then this is the one you need...

This package contains the Realtek driver local area network (LAN) that allows the NIC (NIC) Realtek chip in the notebook models that are running an operating system supported.

File name: sp68947.exe

Tags: Notebooks

Similar Questions

  • HP Pavilion - 15-p264na: audio beats does not open after a clean install of windows 8.1

    Hello

    After a clean install of windows 8.1 the audio beats does not open.

    It appears in the control, but when I click on it nothing happens.

    I have sound, and everything seems to work ok, but I'm curious to know what happened.

    When I go to Device Manager and select audio, video controllers and game, there are 2 features 1 is AMD high definition audio and the other just says high definition audio device.both drivers are up-to-date.

    I look through the forums CIHI and I tried some of the links for the drivers of the itd, but they will not install.

    Any help would be appreciated

    Hello

    Download and reinstall the Realtek HD Audio software at the following link.

    http://ftp.HP.com/pub/SoftPaq/sp69001-69500/sp69164.exe

    When the installation is complete, restart the laptop.

    Kind regards

    DP - K

  • After a clean install of Windows Vista, Intel Wifi card is installed and activated, but does not detect the network.

    Wireless card not working after a clean install of Windows Vista

    I did a clean install of Windows Vista Home Premium on my HP Pavilion of 32 bits. I've completely updated Windows via Service Pack 2. Given that the clean install, my wireless card, Intel (r) Wireless WiFi Link 4965AGN, was not able to detect all the networks. The Wifi card is listed under NICs as being installed and activated. the hardware on my laptop Wifi switch is set on "on" and the light is blue, indicating that the card is working.

    I can connect to the internet if I connect physically my computer to the modem with an ethernet cable wireless, so the modem isn't the problem. Other computers can connect to the wireless modem, so my Wifi modem functionality is not the problem. The problem with my computer.

    I tried to uninstall the Intel driver and reboot my computer with the generic driver. Install the driver generic, but my wireless card has not always worked. I then ran an update of windows, nothing helps.

    I tried to install the "Intel® PRO /? Wireless and WiFi Link"drivers for Windows Vista (32-bit 13.1.1.1 the latest version and the previous version 12.4.4.5 32-bit) for the Intel® Wireless WiFi Link 4965AGN directly from the Intel Web site at http://downloadcenter.intel.com/SearchResult.aspx?lang=eng&ProductFamily=Wireless+Networking&ProductLine=Intel%C2%AE+WiFi+Products&ProductProduct=Intel%C2%AE+Wireless+WiFi+Link+4965AGN. The map didn't always work with a driver.

    In addition to the pilots, I also downloaded a tool of diagnosis of Intel (Intel® PROSet /?) Utility of WiFi wireless connection for Windows Vista 32 -? Bit). Said diagnostic tool the WiFi card is not installed or enabled, however, Device Manager maintains that he is also installed and active.

    Is there a problem that causes Device Manager to say that all is well with the card, but does not map to realize that they diminish the radio signals? Everything's fine, diagnostic, it just does not detect networks around him. Help, please.

    Hello

    The on/off switch actually works?

    Since it is an internal adapter to ensure it is enabled in the settings of configuration/F2 (BIOS/CMOS) often like you
    Start - so look at the screen.

    Have you tried the computer on other WiFi networks? You had a WiFi type problem before the
    Re-install of Vista?

    ---------------------------------------------------------------------------------------------------------------------

    Your router could be suspicious here, you have successfully updated its firmware as a possible solution? And I would like to
    Update your WiFi drivers on computers. How you are positioned in the router? Are there
    obstacles in the path?

    Actually try updating your driver and disabling the network logon.

    Control Panel - network - write down of the brand and the model of the Wifi - double click top - tab of the driver - write
    version - click the driver update (cannot do something that MS is far behind the pilots of certification). Then
    Right click on the Wifi device and UNINSTALL - Reboot - it will refresh the driver stack.

    Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
    http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

    How to install a device driver in Vista Device Manager
    http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

    Download - SAVE - go where you put it - right click – RUN AS ADMIN.

    You can download several at once however restart after the installation of each of them.

    After watching the system manufacturer, you can check the manufacturer of the device an even newer version. (The
    manufacturer of system become your backup policies).

    Repeat for network (NIC) card and is a good time to get the other updated drivers as Vista like
    updated drivers.

    I would also turn off auto update for the drivers. If the updates Windows suggests a just HIDE as they
    are almost always old, and you can search drivers manually as needed.

    How to disable automatic driver Installation in Windows Vista - drivers
    http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
    http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

    ------------------------------------------------------

    Make sure you know the details of connection to your wireless router - SSID and password.

    You lose connection when you do and have to redo your logon.

    Control Panel - Network & Sharing Center - right, click Customize - page set of network locations.
    lower left click on merge or delete network locations - REMOVE all instances of your network (and the
    others you don't use anymore) - REBOOT. Start - Connect To log on to the network.

    -----------------------------------------------------

    Check this box:

    Strange problem with Internet under Vista
    http://www.catonett.com/blog/archives/194

    Windows Vista cannot obtain an IP address from certain routers or some non-Microsoft DHCP servers
    http://support.Microsoft.com/kb/928233/en-us

    ----------------------------------------------------

    And:

    Network connection problems
    http://windowshelp.Microsoft.com/Windows/en-us/help/33307acf-0698-41ba-B014-ea0a2eb8d0a81033.mspx

    I hope this helps.

    Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

  • Missing Ethernet, network controllers SM Bus and PCI device after a clean install of Windows 7 64 bit

    Hello friendly folk,

    I got a used HP Pavilion G6 - 1C40CA.

    There was a clean install of Windows 7 Home Premium 64-bit.

    After searching around online, got a hint of what to do.

    For Device Manager are missing or not that there is not (small yellow exclamation triangle):

    Ethernet controller (Hardware ID: PCI/VEN_10EC & DEV_8136)

    Network controller (Hareware ID: PCI/VEN_14E4 & DEV_4727)

    PCI device (Hareware ID: PCI/VEN_10EC & DEV_5209)

    SM Bus controller (Hardware ID: PCI/VEN_1022 & DEV_780B)

    As well as to find good downloads, I know not to order that I should be their installation (if there is a specific order at all), and if I have to restart every time that I have install something again.

    If someone could be kind enough to drive me very precisely by the process? Pretty please? ^_^

    Hello:

    The first pilot, you need to install is for the smbus controller.

    Download and install the amd chipset drivers and restart.  You want the first file on the Web page.

    http://support.AMD.com/en-us/download/chipset?OS=Windows%207%20-%2064

    Here's the rest of the drivers you need in the order you posted the material ID's, and you can install them in an order any that you like...

    http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-100084-1&cc=us&DLC=en&LC=en&OS=4063&product=5173139&sw_lang=

    http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-95652-1&cc=us&DLC=en&LC=en&OS=4063&product=5173139&sw_lang=

    http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-100083-1&cc=us&DLC=en&LC=en&OS=4063&product=5173139&sw_lang=

  • Does not not on M6-1091se after a clean install of Windows 7 first 64-bit home for fingerprint reader

    Does not not on M6-1091se after a clean install of Windows 7 first 64-bit home for fingerprint reader

    Hello

    Please try:

    http://ftp.HP.com/pub/SoftPaq/sp59501-60000/sp59664.exe

    Another option: click on the following link and click Search now :

    http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4063&LC=en&cc=us&DLC=en&sw_lang=&product=5306751#N2316

    Kind regards.

  • After the clean install of windows 7, it gives an error saying that there is a problem in the hard drive.

    * Original title: hard drive

    I have a lenovo laptop, processor Intel i3, 500 GB hard drive. After the clean install of windows 7, it gives an error saying that there is a problem in the hard drive. I ran chkdsk looking for bad sector and its display 6000 KB in bad sectors. After completing the audit when it began to restart its stuck when the windows logo appears. What should I do? Reinstall the windows help?

    Run the hard drive HD diagnosis extended CD scan manufacturer to know with certainty the State of the reader.  If your brand has no bootable diagnostics in the link, use Seagate Seatools burned onto CD or SeaTools for a USB key .  Follow this with a full check disk command from the installation media kicked prompt know with absolute certainty the State of the reader.  If he repeated the errors after you run the two tests twice, I replace it or at least keep everything backed up in real time.

    If by chance the drive past diagnosis then compares the steps you've done with the best possible Clean install Windows 10 in the link, you can do more if it varied too - especially if the partitions were not deleted during install.  If you do then I additonally run own Diskpart command command line of the punt media accessible to the first screen after startup by pressing SHIFT + F10 keys, or through the repair your computer on the second screen.

  • After a clean install of Windows 7 pro on the Pavilion dv6-6147tx I have no access to the Universal USB po

    After a clean install of Win 7 pro on Pavillion DV6-6147tx I have more universal access to USB ports.  I can't find a driver to download HP downloads or disk 3 recovery disc. 3 USB ports o.k.

    I finally solved my problem of usb 2 with a NEC driver downloaded from HP believe it or not... He took a large sum oh hunting via other websites. My contact with the HP service is a waste of time.

    The pilot is SP47677. EXE from HP, it does wonders, but it does not appear on a search in the HP website.

    I solved my problem.

  • After a clean install of Windows 8, I can't get three monitors to work

    I did a clean install of Windows 8 pro.  I have a Dell T1500 with over-pants V4800 graphics.  This machine previously had Windows 7 installed and works with the ATI driver.  With Windows 7, the three monitors worked without problem.  Now, with Windows 8 installed I can't get two monitors to work.  I use the more updated driver for Windows 8 for the map on the website of AMD.  The third monitor can be seen on the page of the screen resolution, but I cannot "extend desktop...". "the third arch.  When I try to do so it gives me a message saying

    "The display settings could not be saved.  Please try another combination of display settings. »

    All three monitors are the same, Dell P2210.  I tried different resolutions. I tried the driver I was using on Windows 7, I uninstalled the driver and adapter repeatedly.  I installed all the drivers from AMD with the extras (hydravision, etc.).  I used just the default Windows drivers. I have change the placement of the monitors on the video card, but few matter where I plug them in, only two works.  All monitors are operational.  I even tried different monitors.  All this with no result.  I tried to use the Catalyst Control Center.  He sees the third monitor but just shows it as being disabled with no way to enable that I see from in the Catalyst Control Center.

    It is the last obstacle for me to fully use this machine to Windows 8.  I'm puzzled.  I have read many other forums.  I've heard of this problem with Windows 7 as well so I don't know that it's specific to 8 but could very well be.  Yet once I had Windows 7 with three monitors with the same card.  Contribution to this issue would be greatly appreciated.

    I had this problem on a Lenovo three installation of the monitor using the integrated display laptop, a monitor outside the mini HDMI and a third follow out of the HDMI Port among Replicator.

    In the end, it's a simple solution.  When you go to display settings, all three monitors not reimbursed up to 1920 x 1080 and configuration could never be saved - however the 3rd monitor only supported by 1680 x 1050, which is the resolution (recommended).  After changing the 3rd monitor for the resolution recommended, I was able to save the configuration to display > screen without problem resolution.

    I don't know why the resolution not supported has been set default to-after selecting the right pair, there is now no option to go to the highest resolution not supported on this screen.

  • No restore factory after a clean install of Windows 7

    Factory support key F11 RnR restores after a clean install of win7?

    I did a new install of win7 and installed a RnR last on my T410. When I tried F11 RnR, there is no option to restore with. My SYSTEM_DRV and Lenovo recovery xxxx exist and are suitable for all the files in them.

    I have recovery disks, but I just what to see if restore factory F11 works on this path.

    Fix. I had already understood what you were doing.

    I'll say it simple as I can:

    (1) installed at the factory

    The secret is windows 7 added windows re (recovery of win7 to the mix environment). Lenovo plant reorganizing this to factory support. This has created a hidden from the factory restore boot entry.

    (2) your installation "sideways", IE, cram lecteurC.

    This wax installation tips from lenovo. That is to say, no factory entry to move to the RNR standalone.

    (3) any property. do not delete anything. (such as SYSTEM_DRV).

    ==

    You have a dead now at the new disk space.  This works. Large.

    Use RNR and backup every week in a place (external). I know that it was not fun, but has been a learning experience.

    ==

    To clarify: (confusion)

    RNR is the main big daddy.  This is the main task is to rescue by using a backup RNR. Recovery (factory) is a subset, not exactly. This just transfers control to another entry for starting a recovery plant stuff. Thus, Rescue and Recovery.  I answer all the time about it. Yes, they look different, they are.

  • Re-install Acrobat after a clean install of Windows 7

    I have a problem of software (Windows) on my PC that requires a clean install of Windows 7. What to I need to re-install Acrobat on the PC after the clean operating system installed? I have an Adobe account that lists the programs that I recorded as well as the serial numbers. What is the procedure to reinstall Acrobat?

    If you have access to the still of machine, disable the application by opening and by selecting help-> Deactivate.  Later, after the new system is in place, you can download and install.

    Acrobat XI, X - http://helpx.adobe.com/acrobat/kb/acrobat-downloads.html

  • Loss of Internet and Windows features limited after a clean install of Windows 7

    Hi all

    Here's a bit of context. I had an additional Lenovo T410 sitting around, so I tried restoring it to its "factory condition" by a start-up "format". Plan was to boot from the CD drive and reinstall Windows 7 (32 bit) in the process. However, disaster, after the process complete, I'm now stuck in a kind of safe mode (everything is bigger than usual) and the computer is running several pilots. I manually installed the network card driver (can identify networking but cannot connect to the internet). Device Manager still shows device Base system, controller, Ethernet, Serial Port PCI, PCI Simple Communications Controller and unknown to be updated device drivers.

    My goals here are to 1) restore internet connectivity and 2) make all the features of Windows 7 Home Premium.

    Thank you for any input!

    * Virtual H.o.t. If you stuck with me through this whole explanation.

    Lenovo.com connect on another computer, click Help, enter your computer type and download the network drivers for your machine. Then return to the page to download the driver to your computer and download ThinkVantage System Update. Run this and it will update automatically the rest of your hardware drivers (see the post of Zoltan, above).

  • After a clean install of windows 7 Home premium 64-bit, dvd will play not [scrambled] and computer is crashes sometimes and I have to force the reboot.

    I have windows 7 Home premium 64-bit, which has totally collapsed.  By mistake, I installed my operating system 32-bit vista on it.  I bought a new windows 7 Home premium operating system and installed.  I did a clean install after formatting the hard drive [the did twice].  Now dvd will play not [scrambled] and computer is crashes sometimes and I have to force the reboot.  I saw the reference to System 32 on restart options.  Help?

    Original title: operating system 32 and 64 bit

    Have you installed Windows 7 device drivers for your make and model. If this is not the case, then go to the support web site factory and download Windows 7 drivers to a folder on your PC and then first install the drivers for the card mother/chipset, followed by USB, SATA, LAN, Audio and all other pilots.

    Find the website of your computer manufacturer support.
    http://Windows.Microsoft.com/en-us/Windows/help/contact-support/computer-manufacturers

    How do you know if you have a 32 bit or bit 6 vrsion of Windows installed:

    http://support.Microsoft.com/kb/827218

    BIOS updates: you should check to see if there was one, or sometimes several updates BIOS for the motherboard. Read (if provided) which solves the update. Sometimes a newer BIOS update will fix the problem. Read the instructions on how to your BIOS update/flash very carefully and be more you understand the process. There is a risk of a bad flash/update occurs which can make your system unbootable.

    Also check the download site of the manufacture of the graphics card for the latest Windows 7 drivers for your card.
    ATI: http://support.amd.com/us/gpudownload/Pages/index.aspx
    NVIDIA: http://www.nvidia.com/Download/index5.aspx?lang=en-us

    J W Stuart: http://www.pagestart.com

  • No volume screen after a clean install of Windows 7 Ultimate

    Recently, I started College, my program gave me a free upgrade to Windows 7 Ultimate. Not having a clean installation since the purchase of this PC, I thought it was the right time to do it. I realize that when clean installation of windows, you will lose a few pilots, after a lot of research I was unable to find anything to display on for volume orders. If someone is able to find something that could solve my problem, it would be much appreciated.

    Thank you, Jason.

    I have a HP G62 225DX

    64 bit

    Windows 7 Ultimate

    Hello

    Download and install the latest version of HP OSD on the following link.

    http://ftp.HP.com/pub/SoftPaq/sp55001-55500/sp55152.exe

    Once done, restart the laptop.

    Kind regards

    DP - K

  • After a clean install of Windows Vista Home Premium, how long will it take to run updates and it will take a lot of bandwidth?

    updates after clean install of Vista Home premium

    I plan on upgrading the hard drive on my laptop two year old, which will require a clean install of Vista Home Edition full.  I live in a remote with the satellite internet service.  I would like to know in advance what will happen after the installation with the updates of the program.  I will ask you to install them? It would take a lot of bandwidth?

    Hi EllenCB,

    Welcome to Windows Vista community responses.

    Once you make a clean installation on your hard drive is erased. Now, when you install the operating system return updates that have been deleted will be delivered by Windows update to install on your computer. To save time and bandwidth, you can directly install Service pack 1 and Service pack 2 for Vista which would contain more updates. Of course when you run Windows update and when you try to download from the internet, your download speed will decrease. It is best to keep your system up to date which will allow your version of Windows to run better.

    Before installing the update, run the checksur tool, this tool is running an ad hoc analysis of inconsistencies that might prevent future maintenance operations. Download the tool from the link below.

    http://support.Microsoft.com/kb/947821/

    Please let us know if you need additional assistance.

    Kind regards
    Anthony
    Microsoft technical support
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Firefox crashes even after a clean install of Windows

    Hey!

    My Firefox keeps crashing. It starts up ok, but still crashes shortly after. I do not see a pattern in accidents, it seems random. Strange thing is that I had this problem before with Win7 and now he persists after installation clean full of Win10. The two hard drives formatted, no old files or anything left... It crashes in safe mode, too. On Win7, I could get locked out of the browser. Sometimes he would start crashing whenever I started the browser. A reboot has allowed me to once again successfully launch Firefox, but it would soon break without worrying. He crashed on the clean install of Firefox and crashed after that I installed Adobe Flash.

    The crash began perhaps a few days previously, I think not that a lot of it initially. Now, however, it drives me nuts; It is basically impossible to navigate. Firefox browser my go-to for years and I would rather go to another.

    Here are a few crash reports: 4b05df7c-24d3-49e3-a13f-c9d57aca3cf0 bp-775561fc-4d6c-48a5-8c6b-e3af42161108 43d377a7-ea92-4c37-b717-84a562cd2d36 bp-09b21c04-8640-44ed-a261-a98f12161108 bp-9726e46d-d041-4fba-b905-f92682161108 fb6d8a28-79c6-4cab-b4c1-096778ca49e8

    You will appreciate all help to the problem.

    Seems that the problem is solved by itself. Not a single accident today. I don't have any idea of that which could have fixed, or what caused it in the first place. Curious, but no matter, I'm a happy camper now. I wish all support forums it was effective.

Maybe you are looking for

  • Satellite A300-177: how to save pictures using the webcam internal

    Hello I recently bought a Satallite A300-177 which comes with a web camera bulit in.I want to save pictures that I take with him, but it only allows me to send them a mail. Could someone help me how to save them or if not possible? Thank you very muc

  • msvcp120.dll missing file

    Recently, I have formatted the disk c (primary partition) to my laptop dell N4110. So I download the "my dell" asking Dell site, I had to reinstall. But after having successfully both thogh I could open the app manually from the start menu, but I cou

  • Install a new hard drive

    My Presario CQ5700F 500 GB hard disk is dead. If I install a new hard drive, but I can't find my recovery disc and HP has no more recovery for this PC model Kits. How can I put Windows 7 Home Premium 64-bit of the system back on my computer? Help me

  • Without root access startup script?

    In 2015 the API documentation tells you how to use startup scripts, but this requires root account access. The root account has been dismantled in the builds of TC. Am I missing something obvious, but how to use the root, when its been disabled, to c

  • Cannot access Admin Console Internal Server Error

    HelloI installed the server weblogic 10.3.6 on Red Hat EL 6,7 64-bit, x 64 processor.Able to access console Em and all the servervicess work fine, but when trying to connect to the administration ConsoleAfter entering the user name and the password a