Example: Pavilion dv7-7030us: HP Pavilion dv7-7030us digital footprint not recognized no other password - another way in Windows?

Similar Questions

• Pavilion dv7 - 4153cl: Pavilion dv7 - 4153cl replacement HD not recognized when loading windows

  I bought a replacement HD for my Pavilion dv7 - 4153cl and loading windows, I need to load the driver (I guess that a driver IDE or SATA).  It throws an error saying no compatible device not found driver (I can get exact error if necessary).  I went on HP website, downloaded 2 bios drivers, Bios tools, and storage driver.  What is an exe, I ran and then copied the directory created on a CD.

  I point to the CD and still unable to find the device driver.

  Any ideas?

  Record HD:
  Western Digital laptop bare drives 500 GB WD Blue SATA III 5400 RPM 8 MB Cache Bulk/OEM hard drive WD5000LPVX

  If another HD is required, no problem.  If it is a driver problem, a pointer in the right direction would be helpful.

  Thank you

  Ed

  If you are prompted for a driver to support the hard drive during the installation of Windows? It's because the Manager of storage on this laptop isn't RAID, AHCI and Windows 7 isn't this RAID driver available on the installation disc. But fear not only intel makes the driver available here:

  https://Downloadcenter.Intel.com/download/24779/Intel-rapid-storage-technology-Intel-RST-RAID-driver

  You need the F6 driver for 32 or 64 bit one correct installation that you do.  If 64-bit, you must f6flpy-x 64.zip. These are compressed files (.zip). Download the .zip to a different computer and extract the .zip to a USB key and when you reach him point the Windows installation when it is asked for a driver, navigate to the location where the files were extracted from the thumb drive. This should allow you to proceed with the Windows installation.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• HP Pavilion dv7-6004ea: new SSD not recognized in the BIOS

  Hi I have a want dv7 and is currently using a 700 GB drive HARD However im upgrading to an SSD

  I bought a Sandisc SSD PLUS 120 GB, I cloned the HDD to the SSD, I see partitions

  in windows Explorer when im running HDD, but when I try to boot from SSD I get an error

  error code (3F2) I ran diagnosis but no result without error of ideas? Thank you

  If you use the Apricorn software and a usb cable to SATA it should work.

  I did it several times without problem, except when I got an SSD that was a problem.

  Replace the original hard drive in the notebook.

  Download the latest version of the firmware from the manufacturer to the SSD and install it.

  Once you have done this, try cloning of the OS for the SSD, reinstall it in Notepad and start on the SSD.

• Example: Pavilion G4 1303 AU: RAM not fully use

  My g4 pavilion have 2 GB of RAM. but when I install windows 7 (64-bit) RAM say is 1.48 GB usable... why?

  Can I use the memory full well, I have a lot of processes running, and I've never disabled anything using msconfig.

  

  

  

  The available memory is NOT used by Windows, it is used by the material itself.

  Disabling the programs with msconfig will NOT solve this problem. An update of the BIOS can.

  Please take a look at THIS page for more details.

  Citing a moderator of toms hardware:

  When the computer is turned on, the system (BIOS/UEFI) firmware Initializes the memory and peripherals. Part of this process is to create a relationship between the method of access to the memory (physical address space) and the memory itself.

  The firmware may reserve some of the memory itself for the use of material. The biggest offender here is typically a PGI, if they are present.

  Memory is also reserved for the management engine of the platform, which is a component of the chipset which control the features of the platform independent of the main operating system. Management engine is a small embedded microprocessor (not x 86 based) with its own operating system which shares the physical address with the CPU space.

  The firmware also allocates memory (not memory itself) addresses for PCI and PCIe devices. For compatibility reasons, this area of memory is aligned on the top of the lower 4Gio of the physical address space. Physical memory that would take care of this region is moved; to make this accessible memory, most motherboards it remap to a location in the address space.

  In total, on 20MiB of 60MiB memory is made inaccessible to the operating system. Operating system can tell that this is looking at the DIMM SPD and the tables of firmware, but this operating system is not allowed to access or manage the memory of these regions.

  in your case, more than 500 MB is not available. It is most likely a problem of design with the AMD IGP, and you can probably do nothing about it. 1.48 GB is not really enough for a smooth Windows 7 experience. I recommend spending at least 4 GB.

• Example: Pavilion ac123tx: hosted network does not start

  in my computer hp laptop ac123tx (preloaded with win 10 OS) not able to start the wifi hotspot because it lacks the virtual network adapter hosted Microsoft. I tried to start the hosted network from cmd prompt, but every time it gives message hosted network could not be started. The group or resource is not in the correct state to perform the requested operation. what need have the solution to this?

  Hello @gbnavapara,

  Thank you for visiting the HP Forums! The Forums are a great place where you can find solutions for your problems, with the help of the community!

  I read your post about the WiFi problem and wanted to help you!

  Have you tried activation of the adapter in the Device Manager?  You can use the resources here to help: difficulty The Hosted network could not be started in Windows 10 error

  (Not a HP website supported).

  Also, you can try to update your network drivers.  If you're still having problems, then try to review the measures offered in the following post:

  Re: Microsoft organized virtual adapter network - this device is not connected to the computer

  Let me know how it goes.  Please let me know if this information helps you solve the problem by marking this message as 'accept as Solution', this will help others easily find the information they seek.  In addition, by clicking on the Thumbs up below is a great way to say thank you!

  Have a great weekend!

• Pavilion 17-g192dx: USB Ports not recognized

  Hello

  I have a HP Pavilion 17-g192dx that's installed with Windows 10 factory. I decided to give the new operating system a go, but was overall very satisfied with his overall performance and updates of buggy. Not wanting to give up the new machine, I decided to bring it back and oldie but a goodie - Windows 7. I got a copy of Windows 7 Home Premium lying around so I gave a go and installed the operating system. I got the internet running successfully and in no time most of my drivers have been installed. The problem that I face now is that the old BONES will not work with my USB ports. I do not use a hub and have almost exauhsted the drivers for this Web site section. If someone wants to kindly point out how I could go about fixing this issue, any help would be much appreciated.

  I'm not as interested to get back to Windows 10. It is too slow for daily use (ma) and buggy.

  Thanks in advance!

  Hello:

  Download, unzip and run the file setup.exe from the link below...

  https://Downloadcenter.Intel.com/download/22824/USB-3-0-driver-Intel-USB-3-0-Extensible-host-controller-driver-for-Intel-8-9-100-series-and-Intel-C220-C610-chipset-family?product=65855

• Pavilion dv4 recovery DVD is not recognized at startup

  I made a set of 4 HP recovery assistant recovery DVDs when my PC was brand new, and now I want to fix the system (after the failure of the CMF to repair files). However, I get an error of 0xc0000255 at startup (everything has been already verified as OK). Any ideas?

  Found!. As there is no option to select the device to boot to the POST and the option "Fix the system" after F8 does not by default on the CD/DVD drive, it must be done in the BIOS (F10 at startup). So I chose DVD under the 1st boot device.

• DV7-6b63us: PC will not boot past administrator password.

  Help, please

  My PC did to this "password administrator or power on password. After three attempts an error code comes up with 84553642 next.

  How can I reset?

  Hello

  Enter: 31431284

  Kind regards

  DP - K

• Pavilion dv7-4180: LAN - does not connect

  Hi all

  I myself have set up in a new home and now am using a modem to the computer's LAN connection.

  I could not receive a signal when the connection of the modem to my computer, but on wi - fi systems, it works.

  Then on another computer, the LAN connection starts a blinking on the modem and there I go, connection

  through the LAN.

  The first computer that does not have a connection on the LAN-

  Q: what could cause that?

  Once again, it is very well when instead of a Wi - Fi connection and scoring in just this old LAN connection to my new residence

  does not cause it to connect to the top.

  Any advice on a particular problem is appreciated.

  AtAF

  Hi @AtAF,

  Thank you for your query.

  I understand that after moving into your new home, you cannot connect to your local network, is another computer.

  You are able to connect to hotspots Wi - Fi with your CV.

  When I did a search for your model of laptop, I got several results that you forgot to enter the two letters after the model number (example Pavilion dv7-4180us).

  How can I find my model number or product number?

  On this particular model that Windows 8 is not supported by HP so they do not list the drivers updated for it.

  Download or update of software and drivers for HP computers

  You did all your Windows updates?

  You use the same Ethernet cable that worked with the other computer?

  Have you ran the Windows troubleshooting tool?

  If you check device manager there is an error on the network card?

  Here is a link to HP - troubleshooting Wired Home networks (Windows 8) computers that should help you too.

  To say thank you for answering, please click the button below thumbs up .

  If this fixed the problem for you, please choose the solution to help others locate it.

  Good luck!

• USB not recognized - even when there is no device at all (Windows 7, Pavilion dv7)

  For a few days now, I get the message

  "USB device not recognized: one of the USB devices attached to this computer is not working properly." The device has not been recognised "."

  He keeps popping up in my right corner below, every 5 seconds if I don't click it. When I click on the message, I get a list of devices (ports) are available. There is an "unknown device". Maybe it has something to do with the (biometric) finger scan? This has not worked very well lately...

  Even when there is no single USB device installed (normally, I have a mouse and a Targus laptop cooling mat installed as USB devices), it keeps popping up. I tried to remove the USB port from the list (or uninstall) in the remote control, but it seems that it keeps happening.

  I got it all of a sudden, I have nothing specific to has not logged any strange devices (except for a spotlight on exit external screen, but this has nothing to do with USB). I also hear the sound for the connection / disconnection USB devics randomly when I'm on my laptop.

  Someone has an idea?

  Thank you

  HP Pavilion dv7 Notebook PC
  LE902EA #UUG

  Windows 7 64 bit

  The solution can be found here

• HP Pavilion dv7-6c43cl: VT is not enabled, but is enabled in the BIOS settings

  Hello!

  So, I have Virtualbox. I want to install Windows XP 64-bit in there. I own a copy. Before that I have upgraded to Windows 8, there was an option for 64-bit. Now, there is not.

  SAME FACTORY OF HARDWARE/SOFTWARE AS, EXCEPT NOW WINDOWS 8.

  PS: An Information System .nfo file is located here. Please, if there is no serial number I ask you not to use them for illegal purposes, for example, HP supports, saying that my computer is stolen, etc.

  EDIT: Sorry for the confusion, I also want to know if I need to do something to get Virtualbox allow VT technology. It does not now. Also, I read that 64-bit requires a VT

  Hyper-V prevents the installation, execution of many other technologies of virtualization on Windows 8, so I suggest you to try and disable the Hyper-V technology.

• Example: Pavilion p106: my hp pavilion windows 8 is the administrative/on power password screen and I have no help

  Pavilion hp g6 vwindows 8 on administrative / power on password screen I have not either help please

  After 3 attempts with the wrong password - or just leave blank and press ENTER. x 3 button. You should get a message system disabled with a stop code. After the code here:https://bios-pw.org/

• Laptop HP Pavilion dv6 - 3016 s: USB (device not recognized) problems

  Hello

  on my laptop (Pavilion dv6-3016sl, bought in 2010) for a few months the USB connections give many problems with different devices.

  The first issue with the key external communication 3G (ONDA TM201) Internet: the USB key (which has worked for many months) is not recognized. I tried to reinstall the software and drivers (get the latest version from the website of the producer), but it is always unclear correctly.

  The visible in USB Device Manager error message is "cannot start (code 10) machine.

  Recently other USB devices have ceased to be recognized: powered USB Hub (HAMA USB 2.0 Hub 1:4, bus) and the Wired Optical mouse (Logitech).

  It is also not possible to install new USB devices (for example, a device of wireless sync to a cuff of training).

  I've done many controls of Microsoft on the integrity of the system, and I frequently run the Windows Update to be aligned to the latest version of the fix.

  You have any suggestions to analyze/fix this locking problem?

  Thanks in advance,

  Moreno

  I know this may seem a rather harsh to suggest method, but at this point, I suggest backup of important things on your laptop computer to online storage. This is because you can use the USB storage for the moment.

  Once you have done this, it's time to locate your drives support usb recovery and licenses of all other programs that you have installed or recovery.

  Start on the recovery media.

  Use the HP Recovery Manager to perform a factory image recovery which will reinstall the operating system.

  Since you say that the usb ports work under Linux, then reinstalling the operating system Windows needs to solve the problem of usb port that you are experiencing.

• HP Pavilion DV6-6C35DX Wireless does not

  Hi guys, my HP Pavilion DV6-6C35DX Wireles just had his replaced hard drive and after installing windows update my drivers, I noticed that put me on my F12 button will switch off the orange light and does not my network controller driver update.  Or there is no update which can be found when you do a quick search.  Looking at my properties of the network controller under the path of the instance peripheral I get my FRI # and DEV # but neither have been useful in my search on the web.  Please help me restore my computer wireless.  Thank you

  PS an example of my FRI: 10EC DEV: 8176

  If you need to know anything else to help please let me know.

  Hello

  Because you have not provided the right information, so I can only guess. Please try:

  Realtek WLAN Driver for Windows 7:
     http://ftp.HP.com/pub/SoftPaq/sp53501-54000/sp53753.exe

  I need something similar to the following list:

  PCI\VEN_10EC & DEV_8179 & SUBSYS_197D103C & REV_01
  PCI\VEN_10EC & DEV_8179 & SUBSYS_197D103C
  PCI\VEN_10EC & DEV_8179 & CC_028000
  PCI\VEN_10EC & DEV_8179 & CC_0280

  Or at least the first line

  PCI\VEN_10EC & DEV_8179 & SUBSYS_197D103C & REV_01

  Kind regards.

• Ports USB 3.0 not recognized on HP Pavilion G6-2245sq

  I recently bought a HP Pavilion 2245sq G6 and I encountered a problem with USB 3.0 ports. They are not recognized in the Device Manager. I installed some drivers (Chipset, graphic, Synaptics and so on) and it seems that it did not help with my problem. I confess that I have not tried all the solutions I found in the different posts here on the forum because I think that these specific solutions for laptop. Can someone help me please?

  Furthermore, I believe that I can't have the latest drivers because I am running Windows 7 Ultimate 64 bit and I can only find Windows 8 drivers on the official website.

  I also tried to find a driver for them using Windows Update Driver command in Device Manager and it says that it manages.

  Here is the USB 3.0 for Windows 7 64-bit driver:

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=ob-102571-1 & CC = US & DLC = in & LC = on & os = 4063 & Product = 5278311 & sw_lang=.