Example usage of CaptionSource_MacroExpression anywhere?

Similar Questions

• Example usage of 'ctx_doc.markup '?

  I am new to Oracle and I'm not sure how to use the function "ctx_doc.markup".
  
  I tried the example on the right: highlighted in the document by using the ctx_doc.highlight procedure , but I get the following error:

  Error starting at line 6 in command:
  declare markedup clob default empty_clob();
    begin  
    ctx_doc.markup(index_name => 'text_index', textkey => '11885', text_query => '{FUZZY({hello},,,W),FUZZY({john},,,W)}', restab => markedup, tagset => 'HTML_DEFAULT');
    end;
  Error report:
  ORA-20000: Oracle Text error:
  DRG-50857: oracle error in drvdoc.reslob_chk
  ORA-22275: invalid LOB locator specified
  ORA-06512: at "CTXSYS.DRUE", line 160
  ORA-06512: at "CTXSYS.CTX_DOC", line 2198
  ORA-06512: at line 3
  20000. 00000 -  "%s"
  *Cause:    The stored procedure 'raise_application_error'
             was called which causes this error to be generated.
  *Action:   Correct the problem as described in the error message or contact
             the application administrator or DBA for more information.

  Note that I run it in spreadsheet of Oracle SQL Developer
  
  Edit: Also, should I use memory or table markup-ing? In memory seems better, but I don't really know the difference.
  
  Published by: 981243 on February 1, 2013 12:12 AM

  I guess you use multibyte characters, and this is a problem with

  amt number := 200;
  line varchar2(200);
  

  VARCHAR2 (200) is measured in bytes, default, but 200 characters may require more than 200 bytes to store.

  If change you it to:

  amt number := 200;
  line varchar2(400);
  

  It then works OK?

• Portege M700 - random lines are displayed when I write

  A few months ago, I bought a Portege M700 tablet PC for school. It works fine all this time and I was in love. A problem started well this morning.

  When I wrote there would be random lines from off the letters that make it difficult to read. After some tests, I realized that it seems to be like the screen was stuck back somehow. What happens is, I'll write something and after that I raised the pen he will continue to write for a little bit after. I think that the screen is stuck is because the most difficult I have support to write more he will continue to write even if the pen does not touch on the screen.

  Does anyone else have this problem? Any ideas on how I can fix this? Thanks for any help.

  Try to calibrate the screen.
  If you use the writing system then check if you have enough system resources free for it.
  I have problem with some 3rd party programs for writing (for example paragon penreader - write anywhere on the screen).
  This problem was with programs that is too resourses of system for his work and the recognition and the same drawing a line has been very slow.
  If you have some non-standard programs for writing that I recommend uninstalling and check again.

  And try to remember what software install you in the last week or two at the start of this problem ;)

• Import excel 2003 and 2007 files that contains numbers and text in LabVIEW

  Hello

  I try to import *.xlsx files (2007) containing numbers and text in LabVIEW and som *.xls (2003), but I can't make it work. First column with the text and the second with numbers.

  Can someone help me with a small example? Is there an easy way?

  FYI

  I have access to all packages and addons for LabVIEW through my work (University)

  Best regards

  Simon

  There is an example usage of the reporting tool.

  http://decibel.NI.com/content/docs/doc-4965

  It should give you a starting point.

  I hope this helps.

• How to place a (strict) reference of a cluster in a control of Type def?

  Example usage: for example queue message handler it is holding cluster of the references to the controls and lights on the front panel.

  

  I have a cluster of façade of type-def'ed, I need to add to this cluster of references.

  In the typedef for the controls on the front panel (above), I place a control refnum then
  Make a right click-> Select the class Vi Server-> generic-> GObject-> control->-> Cluster Cluster.

  However, this does not produce a typedef of strict type I need.

  How I handled this?

  I managed to place controls in the cluster of typedef of common simple types (numbers, strings, etc.) by placing a refnum control in the cluster and (for the reference of control chain)
  Make a right click-> Select the class Vi Server-> generic-> GObject-> control-> String-> String
  Think it works because they do not need to be strictly typed.

  Delete an instance of your cluster type def on the FP, then drag it to the referance.

• use of the server for executable files VI

  Hi all

  I tried to find a good explanation and example usage of VIserver to launch executables on client PC (XP) via a LAN to a PC (Win7) process controller. Basically, what I found for the controller is specified in this code snippet:

  

  The following was placed in the .ini file of the target at the time of construction to allow VIserver using an executable file (?):

  Server.TCP.Enabled = True
  Server.TCP.Access = "' + * '"
  Server.TCP.port = 3364
  Server.TCP.ACL = "290000000A000000010000001D00000003000000010000002A10000000030000000000010000000000"
  Server.VI.Access =""
  server.vi.callsEnabled = True
  server.vi.propertiesEnabled = True

  If a reference to an instance of application LV is open on the computer command on a specified port, and then a VI reference target

  for the .vi file (another instance?) opens on the same target for manipulation of knot VI. So what was lost for me is the executable

  I am trying to run the file. May not be wired to the terminal way to "ref Open VI". This implementation requires the .exe version and the version of VI

  I am trying to run the code? I launched with success of executable files over a LAN using plink with a script file. Problem is that I can't find a way

  get the target executables once loaded. There is most likely a C solution for this (I'll take it if anyone knows!), but since has VIserver of tools

  to control the execution, I would use it. Also, I want to understand the version of VI of the programme and the .exe in this case (s) link

  Version. Any help would be greatly appreciated.

  lb

  Ben OK,

  Your messages made me a technique to load with distance and running an exe file, built in LV8.5:

  1. to load: the controller emits a "tasklist" command to a target. The objective produces an output file of tasklist which is read by the controller. If it concludes that the target is already loaded, the controller will execute it with an invoke command node 'run a VI '.

  2. If the target is not loaded, then a script file is executed on the target via plink of the controller. This command will also start running.

  3. all the subVIs must reside on the target, as you said, even if (as in my case), the target has no LV Developer Suite installed. I placed Traoré versions of files and folders to exe in the same folder.

  4. the .ini file in the compilation has changed as shown in the first post of this thread. No special settings were used in the compilation.

  This probably isn't the exact technique you had in mind, but it doesn't seem to work... Thanks again for your help.

  lb

• Toggle multiple checkboxes with a button

  I have a system that is controlled by several checkboxes. When the system has increased, the number of checkboxes has increased and now its difficult to use.

  To improve usability, I want to add "Select all" and "select None" buttons on a momentary switch and then power toggle the check boxes normally. "." So if I wanted just the number 2 box, but had others already selected, I can simply press "Select None" and then switch to #2 as usual. And if after that I wanted everything but #4, I could hit "Select all" and then switch to offshore #4. Basically, the Super 2 toggles cannot be a State they are in it overrides the control box - they have to change the values instantly. It should also display properly on the box.

  First thing I tried was using a while loop and registry change to control the property node Value [value and value (signalling)], and it all works when the condition must be true, then it should be false he quickly of impulses. I'm not sure why he does.
  I also built a system around a latch of logic gate to fight Super Select in the toggles stumble the set/RESET button according to the current state, but its strong intensity of clumsy resources, for what he does and not easily extensible somehow.

  There's probably an easier way to do this? I have attached a picture of the method of the loop-and-register (showing only a boolean, for simplicity) and included an example usage below in the cases where my explanation is lacking.

  Thanks in advance

  As a usage example, say you have three checkboxes some already toggled on:
  [1]
  [0]
  [0]
  After Clicking "Select All":
  [1]
  [1]
  [1]
  After which I want to be able to control them as normal, so I could toggle the second check box as normal:
  [1]
  [0]
  [1]
  And then click "Select All" again:
  [1]
  [1]
  [1]
  

  Use a Structure of the event.  When the button is pressed (value change event), use a local variable to set the values in the boxes.

• Why my Win XP processor works 100%?

  I had an old PC sitting around, and I decided to put up just to watch Netflix. He had a lot of junk top, so I used the original CD to format the hard drive and then do a clean install of Windows XP Professional. After that, I downloaded each service pack (SP3) and the update to Windows Update and also updated to the latest version of Internet Explorer. I find this video and sound is choppy at the point of being very bad. It is true that I am on YouTube, Netflix or any other source of video content online. I also get the same results using Firefox and Opera. When I check the speed of my internet connection, it is very fast. I use Verizon Fios. Furthermore, I don't think that this problem has nothing to do with the internet. The other computers on my home video smoothly stream. When I run a screensaver on this computer, it also does not run smoothly. Regularly, it hangs for a while, then leaves upward.  I used the Task Manager to determine that the navigation software uses all the cpu resources.

  The old computer has a connection wired ethernet to the router. It's a Dell Dimension 4300 with a Pentium 4 processor clocked at 1.6 GHz and 1 GB of ram. I tried to run a virus scan, (Microsoft Security Essentials) and CCleaner but it makes no difference.  I also tried looking for useless CPU utilization using msconfig, but I do not see any program running that I could eliminate.

  I checked my other PC, also an old Dell, and when I watch a video online, the CPU usage is not anywhere near 100% and playback is fine. When I try to watch a video on this computer that I'm hoping to fix it, use the processor to 100 and stays there.

  Can someone give me advice on how I can try to correct this situation? Thank you very much!

  Well, I tried to run the MalwareBytes, SuperAntiSpyware, aswMBR and Avast antivirus.  No results.

  There is a simple solution to my problem.  I can part with the money to get one of these little boxes that you can use to connect to Netflix and others.   It's just frustrating to have a PC that should work better she does.

• Problem with external scripts to run

  Hello

  I was wondering if someone can help me, got a problem where the external script is running without problems, the file gets generated and released into the log folder then file disappears as expected.

  When the file disappears, file does not appear to have sent to the BB server. The file has no file extension.

  The customer is 4.40 and the host file is defined by:

  "IP ADDRESS" "Servername" #testip "filename."

  I expect that filename must display the column in Big Brother, but does not...

  All thoughts.

  Concerning

  Col

  What is the format that you use for the log file?

  help of BBPE customer win:

  The first line must begin with the color of the State for the test (usually green, yellow or red). The rest of the file can contain anything; If you click on the color on the screen of Big Brother, you will see the contents of the file. Generally, we recommend that include you the date, time and name of the host on the first line, with the following lines describing the results of the tests, like this:

  color day date [hostname]
  results message
  results message
  ...

  For example:

  Red game 08 21:10:24 1998 [xxx.domain.com]
  blah blah
  blah blah

  We highly recommend that you include the host name on the first line, especially if the client computer uses the DHCP protocol.

  You can change the amount of time before the test results never expire (and the test status shows purple), the substitution of the default on the servers of the display. Place a sign plus (+) and the time, before immediately after the color in the log file. You can express the time in minutes (m), hours (h) or days (d). For example, to have this test does not turn purple for 26 hours:

  Green + 26: Thu 08 21:10:24 1998 [xxx.domain.com]
  blah blah
  blah blah

  Change the expiration time can be useful for scripts that you run only once a day: save the controls, the system checks every day and so on.

  In addition, you can send the status for a test on a different host including the hostname before color, separated by a colon (:). This is useful if you run tests for several hosts from the same client of Big Brother. For example:

  Some.Host.Anywhere:Red Thu 08 21:10:24 1998 [xxx.domain.com]
  blah blah
  blah blah

  This indicates to the server that this status is for some.host.anywhere, not for the current client host.

• Browserfield generates the internal server error

  Hello

  I've implemented an example usage of the guide on this link and its working quite right, but then I saw something. If I click on a link within the browserfield to a non html resource, say mp3 for example http://site.com/file.mp3 or the server redirects or a survey non - response to the browserfield html, I get an internal server error.

  I tried the same in the native browser and everything works fine.

  So I think, it is possible to intercept a request when the user clicks on a link and open the native browser instead when a particular url scheme is detected?

  In addition, im having trouble changing the user-agent the browserfield, here is what Ive wrote

  ===========

  BrowserFieldConfig config = new BrowserFieldConfig();
  config.setProperty (BrowserFieldConfig.VIEWPORT_WIDTH, New Integer (Display.getWidth ()));
  config.setProperty (BrowserFieldConfig.INITIAL_SCALE, new Float (1.0));
  config.setProperty (BrowserFieldConfig.USER_SCALABLE, Boolean.FALSE);
  config.setProperty (BrowserFieldConfig.ENABLE_COOKIES, Boolean.TRUE);
  config.setProperty (BrowserFieldConfig.JAVASCRIPT_ENABLED, Boolean.TRUE);
  config.setProperty (BrowserFieldConfig.NAVIGATION_MODE, BrowserFieldConfig.NAVIGATION_MODE_POINTER);
  config.setProperty (BrowserFieldConfig.USER_AGENT, "MyCustomUAString");

  BrowserField browserField = new BrowserField (config);

  ==============

  Also, I would also like to be able to hide the Progress bar when the browserfield does not load any page, so that it shows only when it is needed (IE when a link is clicked)

  Thank you

  A code example.  If you can't understand what it is supposed to do, please ask. Put shaped went squiffy, sorry about that.

  BTW, I really struggle to test BrowserField treatment on simulators, they seem flaky and sometimes I can't debug.  The one I usually use is actually a 5.0 OS simulator 9300.

  / public final class BrowserFieldScreen extends screen

  implements BrowserFieldConnectionManager {}

  Private BrowserField _bf2;

  Private BrowserFieldConnectionManager standardBFConnectionManager;

  public BrowserFieldScreen() {}

  Super();

  _bf2 = new BrowserField();

  This.Add (_bf2);

  our ConnectinManager hook

  standardBFConnectionManager = _bf2.getConnectionManager ();

  BrowserFieldConfig bfconfig = _bf2.getConfig ();

  bfconfig.setProperty (BrowserFieldConfig.CONNECTION_MANAGER, this);

  _bf2.requestContent ("http://www.google.co.uk");

  }

  Implementation of the BrowserFieldConnectionManager

  public InputConnection makeRequest (application BrowserFieldRequest) {}

  String requestURL = request.getURL ();

  System.out.println ("request:" + requestURL);

  Boolean toBrowser = false;

  If {(requestURL.endsWith ("mp3"))

  toBrowser = true;

  }

  If (requestURL.indexOf ("bbc.co.uk") > 0) {}

  toBrowser = true;

  }

  If {(toBrowser)

  Private browserSess = Browser.getDefaultSession ();

  If (! requestURL.startsWith ("http")) {}

  requestURL = "http://" + requestURL;

  }

  browserSess.displayPage (requestURL);

  String codehtmla =

  "" +

  "

  
  View in browser
  " +

  "";

  return new BrowserFieldResponse (requestURL, htmlToDisplay.getBytes (), HttpProtocolConstants.CONTENT_TYPE_TEXT_HTML);

  }

  try {}

  Return standardBFConnectionManager.makeRequest (request);

  } catch (Exception e) {}

  System.out.println ("Exception:" + try ());

  }

  String codehtmla =

  "" +

  "

  
  Exception
  " +

  "";

  return new BrowserFieldResponse (requestURL, htmlToDisplay.getBytes (), HttpProtocolConstants.CONTENT_TYPE_TEXT_HTML);

  }

  BackMenuItem MenuItem = new MenuItem ("Back", 110, 10) {}

  public void run() {}

  _bf2. Back();

  }

  };

  ForwardMenuItem MenuItem = new MenuItem {("Forward", 110, 10)

  public void run() {}

  _bf2. Forward();

  }

  };

  protected void makeMenu (menu Menu, for example int) {}

  If (_bf2.getHistory () .canGoBack ()) {}

  menu. Add (backMenuItem);

  menu.setDefault (backMenuItem);

  }

  If (_bf2.getHistory () .canGoForward ()) {}

  menu. Add (forwardMenuItem);

  menu.setDefault (forwardMenuItem);

  }

  }

  }

• What theme to use?

  I'm almost finished my app, realized in a mixture of mxml and as3 (if this is irrelevant), and I would like to know what theme to use? We choose according to what we want, or need to stick to the default spark theme? According to me, he said somewhere that import qnx will give him a BlackBerry-esque user interface, but so far, it remains looking like the plain old theme spark. I'm doing something wrong?

  Hey lexrussian,

  Here is an example usage of the LabelButton:

  package
  {
  
      import flash.display.Sprite;
  
      import qnx.ui.buttons.LabelButton;
      import qnx.ui.skins.buttons.RoundedButtonSkinWhite;
  
      // The following metadata specifies the size and properties of the canvas that
      // this application should occupy on the BlackBerry PlayBook screen.
      [SWF(width="1024", height="600", backgroundColor="#cccccc", frameRate="30")]
      public class LabelButtonTest extends Sprite
      {
  
          public function LabelButtonTest()
          {
  
              var newbtn:LabelButton = new LabelButton();
  
              newbtn.label = "A New Button";
              newbtn.setPosition(0,300);
              newbtn.setSkin(RoundedButtonSkinWhite);
  
              addChild(newbtn);
  
          }
  
      }
  }
  

  the default skin for any button is

  qnx.ui.skins.buttons.RoundedButtonSkinWhite;
  

  but you can change it to another skin

  qnx.ui.skins.buttons.RoundedButtonSkinBlack;
  

  so if you went this route, your code would look like this:

  package
  {
  
      import flash.display.Sprite;
  
      import qnx.ui.buttons.LabelButton;
      import qnx.ui.skins.buttons.RoundedButtonSkinBlack;
  
      // The following metadata specifies the size and properties of the canvas that
      // this application should occupy on the BlackBerry PlayBook screen.
      [SWF(width="1024", height="600", backgroundColor="#cccccc", frameRate="30")]
      public class LabelButtonTest extends Sprite
      {
  
          public function LabelButtonTest()
          {
  
              var newbtn:LabelButton = new LabelButton();
  
              newbtn.label = "A New Button";
              newbtn.setPosition(0,300);
              newbtn.setSkin(RoundedButtonSkinBlack);
  
              addChild(newbtn);
  
          }
  
      }
  }
  

  and the result would be a black gradient button.

  You can learn more about the skin here:

  http://www.BlackBerry.com/developers/docs/airapi/1.0.0/QNX/UI/skins/package-detail.html

  and particularly affects the skin here:

  http://www.BlackBerry.com/developers/docs/airapi/1.0.0/QNX/UI/skins/buttons/package-detail.html

  Good luck!

  @jtegen: he doesn't sweat man. you have been more useful through the forums, and is very much appreciated. everyone makes mistakes!

• Help recording from stereo microphones in the Air

  I've been using this example of a model as it:

  http://cookbooks.Adobe.com/post_SimpleAudioRecorder___Microphone_Access_API_AIR_2_-16746.html

  While it does not save, it saves it in mono. Specifically, it combines the pickups in a channel and that puts on 2 channels, which could be a problem with the class WAVWriter that I use to save the file.

  Is it possible by air to record using the stereo microphones (left + right channels)? Maybe someone could direct me to a site/example usage of stereo microphones.

  Thank you

  Thanks for the info; Maybe just stereo is not exposed through the API of the AIR on the PlayBook.

• To access the properties of QML context through several QML files

  It seems so basic, but I don't see how well...

  I put a 'WebAPI' context property to access my class that makes HTTP requests etc. WebAPI works very well main.qml, but when I try and use it in the included LargeThumbItem.qml I get:

  "LargeThumbItem.qml:37: ReferenceError: can't find variable: WebAPI.

  How to set a context property that is available for * all * my QML files? What is the best practice for this?

  hand. QML

  {

  ...

  {ListItemComponent}

  type: 'point '.

  LargeThumbItem {

  }

  }

  ....

  }

  LargeThumbItem.qml

  {

  ....

  WebAPI.getImagePath (...)

  ...

  }

  I do the usual configuration...

  QmlDocument * qml = QmlDocument::create("asset:///main.qml").parent(this);

  QML-> setContextProperty ("WebAPI", m_pWebAPI);

  I tried calling qml-> documentContext()-> setContextProperty(), but it did not work. Is there a global context that I can put all documents will inherit? (the API documentation seems to suggest there is).

  This problem is related to what is described here and the solution is the same. The problem is that the ListItemComponents have a different context and lifecylce due to the fact that they are cached in and out as the scrolls of the ListView (see here for details).

  I solved it by adding a dynamic property on the global object of 'Qt' for example in onCreationCompleted() or anywhere where the senses in main.qml. In my case, I chose to pass a string, because I don't know if the global property to the instance around WebAPI is a good idea.

  Qt.homeListBaseURL = WebAPI.getImagePath ("TitleImagePathPrefix", "170 x 240")

  Then in LargeThumbItem.qml for example

  {WebImageView}

  ...

  URL: Qt.homeListBaseURL + ListItemData.ContentId + '.jpg '.

  ...

  }

• Conversion of lines to the ACL

  I have an inside/outside/dmz configuration. I am NAT from inside to outside.

  I would like to convert LEADS to ACL statements, but I'm a little confused about some things, and I can't find examples of good config anywhere.

  If, for example, I have a global static, assigned to an address inside and a conduit between this world and an outside addy, ACL control shall be applied (incoming) outside, inside (incoming), or both?

  Any help or reference to examples of good config would be more useful.

  Thanks in advance,

  John

  The access list would be implemented the same way. You create the statement of access using the remote resource list and the external address four of your resources.

  access-list allow tcp options

  The access-group command allows you to assign the access list for an interface.

  group-access to the interface

  The PIX looks at the package to the address of the remote source and local destination address, which you will be external IP address. The static mapping to the internal IP address occurs after the package, he went from the ACL.

  I hope that helps

  Kevin Kelly

• Cisco IOS SSL VPN does not-Internet Explorer

  Hi all

  I seem to have a strange issue of SSL VPN.  I have a Cisco 877 router with c870-advsecurityk9 - mz.124 - 24.T4.bin and I can't get the SSL VPN (VPN Web) works with Internet Explorer (tried IE8 on XP and IE9 on Windows 7).  When I go to https://x.x.x.x, I 'Internet Explorer cannot Display The Webpage ".  It kind of works in Chrome (I can get the Web page and connect, but I can't start the thin client, when I click on Start, nothing happens).  It seems to only work with Firefox.  It seems quite similar to this topic with the ASAs - http://www.infoworld.com/d/applications/cisco-asa-users-cant-use-ssl-vpns-ie-8-901

  Here is an excerpt of the configuration:

  ------------

  !

  username password vpntest XXXXX

  AAA authentication login default local
  !
  !
  !
  Crypto pki trustpoint TP-self-signed-1873082433
  enrollment selfsigned
  name of the object cn = IOS - Self - signed - certificate - 1873082433
  revocation checking no
  rsakeypair TP-self-signed-1873082433
  !
  !
  TP-self-signed-1873082433 crypto pki certificate chain
  certificate self-signed 01
  -omis-
  quit smoking
  !
  WebVPN gateway SSLVPN
  router host name
  address IP X.X.X.X port 443
  SSL encryption aes-sha1
  SSL trustpoint TP-self-signed-1873082433
  development
  !
  WebVPN context SSLVPN
  title "Blah Blah"
  SSL authentication check all
  !
  Login-message "enter the magic words...". »
  !
  port-forward "PortForwardList."
  description of remote-port 3389 to remote-server '10.0.1.3' local-port 33389 "RDP".
  !
  SSL-policy strategy group
  port-forward "PortForwardList" auto-Télécharger
  Group Policy - by default-SSL-policy
  Gateway SSLVPN
  users of max - 3
  development

  ------------

  I tried:

  Activation of SSL 2.0 in Internet Explorer

  * Adding the site to websites of trusted in Internet Explorer

  * Add to the list of sites allowed to use Cookies

  At a loss to understand this.  Has anyone encountered this before?  Whereas Cisco's Web site shows an example usage of IE (http://www.cisco.com/en/US/products/ps6496/products_configuration_example09186a008072aa61.shtml), surely, it should work in IE you would think?

  Thank you

  Hello

  I would check out where exactly it is a failure, either the connection ssl itself or something after that. The best way to do that is executed a wireshark capture when you try to access the page using IE. You can compare this with that with Mozilla too just to confirm that ssl works fine.

  Also you can try with different SSL encryption algorithms as a difference between the browsers is the encryption they use. 3DES is expected to be a good option to try.