examples RFID RS485

Hello.

I'm new to labview and I'm responsible for writing a vi to read and save the detected by the RFID reader rfid labels.

The drive uses rs485 communication. I used a rs485 to conventer usb to connect it to my PC.

Can someone please indicate examples vi that I can use to start my development.

Tags are smart tags with 8 hexadecimal characters.

Thank you very much in advance.

Alex-han

It depends on the USB converter to RS485 you use. If it lists as a COM port, you can use the Serial Port in LabVIE vi. It is very easy and there are working examples for receive and send strings (ASCII)...

Kind regards

Germain

Tags: NI Hardware

Similar Questions

  • Modbus (RS485) and automation direct example GS2

    I'm looking to see if someone has used the GS2 Direct Drive and LabView automation and has a VI workign? I searched on Modbus over RS485 that uses the GS2 and I looked at the .vi Modbus Library. Correlate all that in a single coherent thought seems to have escape. I'm new on LabView and never seen before Modbus and I have a calendar that is very short to get something. Even if all .vi did was to start and stop the engine, I would be happy. Then I could set up the rest.

    GS2 manuals

    Figured it out finally. I have attached two VI. Read records and one for write to registers with notes on how to stop and start the car.

    Thanks for the help.

  • Control data DATAKOM DKM 409 RS485 modbus output

    Hello world

    My project is to control a furnace and im using DATAKOM DKM 409 with rs485 modbus output. in this project, I want to monitor data using labview.  reason to do this, I use a RS 485 to RS 232 converter but when I connect them to each other and to my pc there is no recognition of the machine and when I want to use visa in BT it cant recohnie any device connected to it and gives me below error:

    LabVIEW: (Hex 0xBFFF009E) VISA or a library of code required by VISA impossible situated loaded.  This is usually due to a required driver is not installed on the system.

    my converter is under this link:

    http://www.securitycamera2000.com/products/CCTV-RS232-to-RS485-PTZ-converter-for-DVR.html

    Please give me a guide about what is not going in my project. I really don't know why I can't config my port of visa and my source of visa is not recognized

    thnks

    ERFAN Shahsavari

    Hello my dear all

    Here is the answer and the consequence of my work:

    1. in the manual of my legacy notes that we can choose 1 to 253 device id and I chose 240 but it was a mistake and I have the device between 1 32 ID value. (If I want to select more than 32 a Repeater must be used)

    2. According to the operating instructions register addresses are between 40001: 40095 example 40068 and because of the structure of MODBUS RTD (device id, the function code, address of departure, number of registers to read registry, control CRC) I need to set the register addresses 40068, but it was a mistake and it was bad. The correct registry address is 68 no 40068. And in the structure MODBUS should I use 68 no 40068 or using the modbus library, that I must use 68 as registry address 40068 not.

    Thanks for your guides

  • Power Meter Modbus rs485 via 9871

    Hello

    I'm under Labview 2015

    I'm currently trying to connect has the place D Pm820 (meter) NI 9871 module in a crio 9076. The project is supposed to read the performance data in the registers of the meter (current, voltage, etc.) using the port rs485 on the back of the meter.

    The pm820 has a pinout for rs485 2-wire with 1 (-) 2 (+) and a 3rd Armor/ground wire. The pm820 meter is a slave device that has several different protocols that it can run on (Modbus RTU/ACII8/7 and JBUS).

    The setting of the counter are:

    Protocol: Modbus RTU

    Address: 1

    Baud rate: 9600

    Parity: None

    I use the module 9871 for device communication for the cRio

    I use the power cord that came with the module 9871 RJ50 to db9 and have the pins 4 and 8 rider (TXD + TXD +), and then connected to the (+) 5 and 9 meter jumper pins (-RXD, TXD) - and then wired to the (-) meter and ground on pin 1. I have read, it's how wire you the db9 connection rs485 2-wire.

    My first goal is just to get the communication with the power meter so that the value that I see in the registry, it is what I should see.

    I started using an example VI for holding registers (master modbus on target RT) reading as labview was pre-constructed and changed it so that its contribution would be to port 1 on the 9871 as created controls for my run configuration. Other I left the rest of the VI that it has been opened.

    When I run the VI I see numbers appear in the registry list, but they have nothing to do with the power meter. I unplugged the power meter and still got the same result however if you unplug the cable connection the 9871 1 VI will be a mistake (as expected). I have the feeling that the labview speaks to itself through the 9871, but I'm not sure. I looked at other posts, trying to find a solution and came across a mention of having to set the thread mode, but I can't find a way to do it using the modbus library.  However I could not find an example reading VISA registers the using visa I see there is a way to do it.

    I enclose a picture of my VI and the front panel to show what I mean.

    If I could help either make my VI work or at least get pointed in the right direction that would be great. I'm not against the use of the Visa library either. Also if you have examples or resources that would allow that they would be greatly appreciated

    It's just a part of my project but just get work communication is my main priority at the moment.

    Thanks in advance,

    Mike

  • PXI-8433 (RS485 or RS422)

    Hello

    I use NI PXI-8433/2 Board for both interface RS422 and RS485.

    It seems the two ports are set up RS485 only.
     
    Could I use one port(for example : COM8)  for RS485 and one port((for example : COM9)for RS422?

    If it's possible, how (and where) can I set up for them separately?

    Thank you

    Insuk

    Attachment: screen shot for Port Setteings (RS485) and Advanced Configuration (4-wire).

    Hi Insuk,

    If you set the 4-wire RS-485 port, you can connect an RS-422 interface. I don't know if the Board can handle full-duplex, maybe not important for your application.

    Kees

  • How to control by TCP RFID reader

    I need get data from the RFID reader, I realized the connection to the drive of "TCP listen.VI" and got the data packet. Now I want to control the player, so I should send him commanding the reader first, the issue is that I don't know how to send a command to control the player, and what should be the order. I am a novice, I hope you can help me, thanks!

    The VI and the instructions of the RFID company is attached!

    Here is a very basic example of how you could get the gain in return for RFID reader. Using a similar approach, you can implement the rest of teh Protocol as defined in the specifications.

  • I just bought the last Apple TV - I can't seem to connect with the App Store and Siri is completely useless. This is an example of how Apple is unable to produce a useful product?

    I just bought the last Apple TV - I can't seem to connect with the App Store and Siri is completely useless. This is an example of how Apple is unable to produce a useful product?

    Hello

    Be sure to follow the instructions in this article to support > set up your Apple TV (4th generation) - Apple supported

  • I think I have to reset the SMC on my MacBook Pro, but I need MUCH more information on my MacBook Pro. For example, is the battery removable?

    I think I have to reset the SMC on my MacBook Pro, but I need MUCH more information on my MacBook Pro. For example, is the battery removable?

    Depends on what year it is.

  • Keyboard entry displays garbage - is OK in IE and Chrome. Abdelkrim will show for example 123' -! random characters every time

    When I type for example aaaaaaaaaaaa what follows is displayed asdfghjkl; ' '-the characters are different each time.

    This just started happening today. IE and Chrome doesn't and characters appear when they are typed.

    I uninstalled and reinstalled Firefox but still the same

    What security software do you have?

    Some security software a typo protection or Anti-Keylogger features that can cause this.

    Start the computer in Mode safe mode with network support Windows (on the startup screen, press F8) to see if that helps.

  • Page Firefox blocks, led busy, very low cpu on some sites. I have an example.

    Firefox 41.0, win 10 Pro x 64.
    Recently (possibly before v.41) pages Firefox hang with very low cpu on some sites.
    Firefox itself is not hung, but for this tab, the indicator of the clock continues ticking.
    I open the problem while another tab has the problem.
    Some data on the website are generally displayed (context?).
    There may be a redirect/refresh any (full proposal).
    Note: in this case, the web site is grayed out.
    Example: https://www.code42.com/store/
    Problem is when I navigated to the URL above. Also occurred when I pasted the URL.
    Works in Version Chrome 45.0.2454.101 m.
    Working on board 20.10240.16384.0

    Note: right now, I'm trying to upload an image, the download is not finished. Ticks of the clock.

    I will try to present this anyway.

    I was about to follow the instructions in the above message, but tried the web site to verify that the problem continues. There can be no. I don't know what I've done (maybe I cleared the cache I've been poking).
    Anyway. Please close this incident.
    And thanks for your help.

  • Phone wants to know a port number. What is c? Their example. 0101

    I am going through the pain of installing my email on my phone. I was able to fill in all, but what is called a port number. The phone gives an example of 0101

    Hello

    It's not something that I think is related to Firefox for Android, but I'll do my best to help.

    The e-mail on your application software a Port number to help it connect to your mail service. Each mail service provider has different settings, so I recommend you contact or have a look in their help files for orientation. This will usually lies in the sections to make the connection by using the third-party e-mail software.

    I hope this helps, but if not, please come back here and we can look at another solution for you.

  • Firefox does not comment based on Facebook on all websites (for example Huffpost): I tried the safe mode, disabling anti-ad... nothing works.

    I can get on FB and post. etc., but sites that use them commenting on do not display comments. I've tried safe mode, re - install Firefox: not to go.

    It's complicated. There are many links in the chain...

    You want to check if Firefox is actually sending a request to Facebook many different servers and receive a normal response? Here's how you can try it.

    While watching the HuffPost (or other) page, press Ctrl + Shift + k to open the Web Console in the lower part of the tab along its top edge, click Network. Then reload the page and network monitor should start to fill with dozens of URL in the order that makes Firefox the application.

    After he calms down, you can scroll down or click on the header of the column field sort by site and search queries to these areas. They were called in the order in my little test, among a bunch of other things:

    For example, if there is no request to connect.facebook.net, then a script blocker or a blocker Tracker can kick in. If there is no request for html pages, then the script could be at fault or another type of block can be considered.

    Note: I stay connected on Facebook, so being connected may have some influence on this point that I'm not aware of.

  • When you type a query in the bar always double the third letter, for example, research, if I want to write a 'youtube' written "youutube" what to do, help

    When you type a query in the bar always double the third letter, for example, research, if I want to write a 'youtube' written "youutube" what to do, help

    Hello chilli.willi, try Firefox Safe Mode to see if the problem goes away. Firefox Safe mode is a troubleshooting mode that temporarily disables hardware acceleration, restores some settings and disables add-ons (extensions and themes).

    If Firefox is open, you can restart Firefox Safe mode in the Help menu:

    • Click the menu button

      click Help

      then select restart with disabled modules.

    When the Firefox Safe Mode window appears, select "start mode safe."

    If the problem is not present in Firefox Safe Mode, your problem is probably caused by an extension, theme or hardware acceleration. Please follow the steps described in the section Troubleshooting extensions, themes and problems of hardware acceleration to resolve common Firefox problems to find the cause.

    To exit safe mode of Firefox, simply close Firefox and wait a few seconds before you open Firefox for normal use again.

    When find you what is causing your problems, please let us know. This might help others with the same problem.

  • Is it possible to sync only bookmarks in one device, for example and all the other stuff between other devices?

    Hello.

    I have 3 devices. 2 of them are at work, so I don't want to sync items such as extensions (xnotifier, for example, is to synchronize my CPA), passwords for my PC at home with these two devices. But I want to synchronize my bookmarks and other things. Is it possible to separate between different devices sync settings?

    Thank you.

    You may need to use two separate sync accounts, if this is not possible with a single account.
    As you cannot use both accounts at the same time on a device, you will need to disconnect the computer which is the main device and (temporarily) connect to another account only synchronize to the other account to sync bookmarks.

  • When I type in a firefox window, typing backwards, for example ABCD appears as DCBA solutions?

    I am a passionate user of Mozilla Firefox for several years, but recently, what I type in Google or any window open a bookmark out backward for example ABCD appears as DCBA. I also have access to Internet Explorer, and it works perfectly. I don't know what I'm doing wrong, any suggestions? I use Windows 7 x 64 Edition Home Premium.
    Thank you

    Finally cracked. COR - el followed advice and new profile. It's early days, but everything seems to work well. Thank you all for your help and advice.
    Thank you, all have a good 2015

Maybe you are looking for

  • HTML5 error reading on Youtube

    I started to experience problems reading for HTML5, flash works fine. What's happening... I click on a video to watch.  Loading the page and I see a still image in the window playing with HTML5 in the center of it.  I click on it to start playing, as

  • How can I put music on my iPhone (iOS 9.2) 6s from iTunes (12.3.2.35)?

    For the life of me, I can't understand how to put music on my iTunes on my MacBook on my iPhone. I'm guessing that Apple thinks that we need not do more with the ability to stream our library of music in the cloud. But music I would actually like to

  • Satellite L675 - Drive problems

    Hello Last night my laptop seemed to have been a power surge. Here is what happened: I was on Skype on my laptop, but also using a program to capture images of my Hauppauge HD PVR. A friend and I used to play X - Box to record a double review for you

  • Satellite A200-1ZF: FN keys do not work on Win XP

    Hi all. I'm new arround here, and I have a question on my new laptop.I have a Toshiba Satellite A200 laptop 1ZF, and I installed windows xp.I could install most of the drivers (including the touchpad, webcam, bluetooth, etc.), but I can not do with t

  • Y510p is not using Nvidia graphics, only Intel HD4600?

    Hello I just bought Lenovo Y510p with GT755M and HD4600 from Intel on board. They work in the Optimus technology. When I try to play Battlefield 3 or 4, this message appears: "device creation error DirectX. Your computer does not meet the minimum req