Excellent signal, but cannot connect to the wireless network
XP Pro Client has been connected to the area by cable network, but now we need to connect in wireless. Card of TrendNet USB Wireless-N, no problems. The light is on the card, and the network is visible with a signal strong. When I try to connect, I get the message that it cannot connect, and the network may be out of reach. Sometimes, I get a balloon indicating that one or several wireless networks have been detected, but when I then try to connect, I get the same message. The PC is about 10 feet below the access point, with only a counter between the two. I have uninstalled, reinstalled, tried to update the driver, etc. Any help would be appreciated.
Thanks for your help - problem was solved using the TrendNet utility to connect and add the key instead of using the Windows utility.
Tags: Windows
Similar Questions
-
Wireless network adapter cannot connect to the wireless network
When I start my PC HP TouchSmart it does not recognize my wireless network. It says wireless network adapter cannot connect to the wireless network and the details said network adapter "Local network connection * 16 ' does not work properly. The strange thing is that if I leave my computer for a few minutes, then restart it twice, it recognizes the network and starts working. Frustrating is that I have to do this everytime I turn on my computer. It takes at least 10 minutes of starting and restarting my computer before it will recognize my wireless network. Any help?
Go to the website of the manufacturer of your router > make sure you have the latest Firmware in Vista for it.
Go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > look for it last network adapters Vista drivers > download/install the.
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-adapter-problems
Troubleshoot network adapter problems to Microsoft link above.
Try without commitment TCP/IPv6:
If you still have internet connection probs, one thing to try is the separation of the TCP/IPv6 (which is done by going to network connection > right click > properties > it uncheck > OK.)
http://digitalmediaphile.WordPress.com/IPv6-how-to-unbind-from-a-NIC-in-Windows-Vista/
See you soon.
Mick Murphy - Microsoft partner
-
PC cannot connect to the wireless network
Windows Vista and office computer HP. The use of the Airport Extreme.
All other computers in the House can connect to the wireless network.
The Vista machine declined the connection Wireless intermittently for the past two weeks. Tonight, he lost it completely. When I click on "connect to network" in the network control panel - I see the wireless network. But when I click on connect, I get a message that Windows cannot connect to this network.
I changed the password on the Airport Extreme and rebooted, it. Wireless usb on Windows machine the device works correctly, by checking through the properties box.
For example, Vista machine is recognizing the wireless network, but does not connect. Why not?
I'm ready to throw the computer out the window!
Hello
Check the PoodlesAway solution to the same issue here:
======================================
Apple Airport may be your main problem - did you check its firmware?
http://reviews.CNET.com/8301-13727_7-10331876-263.html
======================================
Actually try updating your driver and disabling the network logon.
Control Panel - network - write down of the brand and the model of the Wifi - double click top - tab of the driver - write
version - click the driver update (cannot do something that MS is far behind the pilots of certification). Then
Right click on the Wifi device and UNINSTALL - Reboot - it will refresh the driver stack.Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmHow to install a device driver in Vista Device Manager
http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.htmlDownload - SAVE - go where you put it - right click – RUN AS ADMIN.
You can download several at once however restart after the installation of each of them.
After watching the system manufacturer, you can check the manufacturer of the device an even newer version. (The
manufacturer of system become your backup policies).Repeat for network (NIC) card and is a good time to get the other updated drivers as Vista like
updated drivers.I would also turn off auto update for the drivers. If the updates Windows suggests a just HIDE as they
are almost always old, and you can search drivers manually as needed.How to disable automatic driver Installation in Windows Vista - drivers
http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx------------------------------------------------------
Make sure you know the details of connection to your wireless router - SSID and password.
You lose connection when you do and have to redo your logon.
Control Panel - Network & Sharing Center - right, click Customize - page set of network locations.
lower left click on merge or delete network locations - REMOVE all instances of your network (and the
others you don't use anymore) - REBOOT. Start - Connect To log on to the network.-----------------------------------------------------
Check this box:
Strange problem with Internet under Vista
http://www.catonett.com/blog/archives/194Windows Vista cannot obtain an IP address from certain routers or some non-Microsoft DHCP servers
http://support.Microsoft.com/kb/928233/en-us----------------------------------------------------
And:
Network connection problems
http://windowshelp.Microsoft.com/Windows/en-us/help/33307acf-0698-41ba-B014-ea0a2eb8d0a81033.mspxI hope this helps.
Rob - bicycle - Mark Twain said it is good. -
Satellite Pro A200 cannot connect to the wireless network
Hello
I have a Satellite Pro A200 and Tuesday night I was able to connect to a wireless network. I received an update, rebooted and now it doesn t seem to work.
I can see the wireless networks available via the Toshiba Radar but cannot connect to my usual wireless network.
Also, the wireless network icon disappeared from my system tray and if I go to Control Panel/network connections, I can't even view available networks because there is no option to do so.Any ideas?
the FN/F8 will work?
Help! Please, I beg you!Have you tried using System Restore and restore the operating system on time earlier?
Maybe this will remove the update installed, and you can again use the WLAN.Check it out.
-
Hello
I have a HP Deskjet 2540 printer that is configured to print using the USB cable, and I have no problem printing through it. I just bought a router (D-link DWR116) and I'm trying to set up the connection to the router wireless to my printer. When I use the printer setup & software and select the option "convert a connected USB printer wireless", I can choose to enter into the setting of the printer access the router automatically or manually. These two will come with the same problem where the program is my name SSID of the router successfully but then failed to connect to what the SSID is not found.
It comes on it comes up with the error message:
Question: You have manually entered the name of the network (SSID) cannot be found.
Solution: Check that your wireless router is powered. When to manually enter the name of your network (SSID), make sure you enter exactly including upper and lower case and spaces.
============================================================================================Which is meaningless because it came with the SSID earlier and I chose what options the wireless network available. I tried to manually enter the SSID, but after entering the password for the router, the same error message appears.
Help, please.
Thank you
In fact, I solved the problem. Something about the wifi light on the printer. It can not be flashing, I don't know what the blue light flashes on the wofo of the printer, but I don't think that it means that the wifi is on.
-
Satellite Pro U400 (XP pro) cannot connect to the wireless network
I got a U400 straight out of the box. I installed XP pro through the disc of recovery without any problem, except that I am not able to connect to the Wi-Fi here. (Other devices connect very well so the problem is at the end of the laptop) I tried to update via windows update (SP3) via a wired LAN connection but still the same problem. Other posts here have any suggestions for downloading new drivers from realtek. All of the solutions presented do not work for me. Anything else I can try?
I am able to see all the wireless networks that are available in the range and may try to connect (provide the WPA password) but after watching the "preparation to connect" screen for a while he seems to abandon without reporting any error
Hi guys
First check if you are using the latest version of the BIOS.
Second, clear all options of the router WLan security (filtering by MAC address, Firewall, encryption of WLan, etc.) and try to establish the WiFi connection.If you're going to succeed the problem is certainly related to the encryption settings
Step by step, activate the settings and set up the router again.Good luck
-
strong wifi signal, but cannot connect to the internet
I have a strong wifi signal, but I can't connect to the internet continues the smartphone and smart tv... help! We pay high speed internet but can not use it.
Thank you
Hello
Thanks for posting your query in Microsoft Community.
I understand that you have trouble connecting to the WiFi in Windows 7. We'll help you probably with the same.
- What happens while you are trying to connect to the internet with the Wi - Fi network?
- You are able to connect to internet while, you use a wired connection?
You can try to follow the following suggestions to solve the problem.
Using the troubleshooter from network in Windows 7
http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7I suggest you to consult the help articles and check if it helps.
Windows wireless and wired network connection problems
Additional information:
Solve problems, find wireless networks
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-finding-wireless-networks (Also applies to Windows 7)
Wireless network card: frequently asked questions
http://Windows.Microsoft.com/en-us/Windows7/wireless-networking-frequently-asked-questions
I hope this helps. Otherwise, feel free to write us again for more assistance, and we will be happy to help you come.
-
Nook cannot connect to the wireless network
Can't enjoy internet on Nook. A good signal, but when I click on the Dlink to enter password-cannot connect. Help please.
Why don't you ask Barnes and Noble?
-
laser jet pro printer MFP M127fn newly installed cannot connect to the wireless network
I just bought the printer [all in one]. I initially put in place by using the CD that came with it and a USB cable. Then downloaded the update from Apple software, following the instructions, but cannot follow the instructions online. I can't find the menu on Control Panel wireless. It is not upward under Network Configuration.
Hello
The HP Laserjet M127fn is not a wireless printer (model M127fw however provide wireless capabilities), it supports only wired network connection, as you can find below in the connectivity section:
http://support.HP.com/us-en/document/c03898081
Jean-François
-
Want 5532: Printer cannot connect to the wireless network
My desire 5532 impossible to connect to the network wireless after upgrading the firmware on the router. When you use the wireless on the printer configuration wizard, it cannot find the router. When I manually enter the SSID router and the password, it remains impossible to connect. It wasn't a problem before. Any help would be appreciated.
Thank you
Scott
After updating firmware on the router makes you hard reset the router to its factory settings. Then reconfigure the router back to your configuration, do not use any file backup right? If this isn't the case, please do it first to get your fixed router. Reset the printer to the network settings, and then try again.
-
Photosmart C4780 cannot connect to the wireless network
My Photosmart C4780 worked just well, wireless, and now I can't print unless I connect it to my laptop or desktop via the usb cord. I'm under that Mac OSX 10.9 with the Mavricks downloaded on both computers. I was able to print from my Mac Mini, iPhone, iPad and MacBook Air all without problem, but now my WiFi network Test report said that I do not see "Network name (SSID found)". The Configuration Page of my status Netowrk said HP network is Offline and my Active connection Type is None, but I can see my network under number of 802.11 networks discovered. I think I just need to connect or reconnect the printer to the network but I can't find how to do this anywhere on the help site. Can someone tell me how to connect my printer to my network now? When I first installed it on the network, I had no 10.9 OSX with Mavricks so the installation CD works perfectly, but it does not work either. One last thing, when I try to use the screen on the printer and go through the WIFI Protected Setup the two push button and PIN fails. HELP PLEASE...
Hi hisfunbox,
I'm sorry to hear that you are having problems connecting to your wireless printer.
I have included a document with steps on how to change the printer to a USB connection to a wireless connection. It has a paragraph for Mac OS X Lion mountain/OS X v10.9 Mavericks v10.8. The second option in this section is how to move from the existing USB connection.
Installation of the software of the printer for a wireless network connection
-
Satellite L750 - cannot connect to the wireless network found
I am the owner of the Satellite L750-1ñ3 and I installed atheros wlan drivers for my toshiba. But when I try to connect to my network which is protected by wep key and I enter my key I get an error from the key or password is incorrect.
I correct wep key entry because it works on my Tablet PC.
In addition to the wirless led light is constantly orange on laptop, even now.I put t really help now. Fact is that WLAN on your laptop works well if you can detect your home WLAN.
To check the protection to disable the feature for a few minutes and try to connect to your laptop without protection key. It work?
-
Sonos system cannot connect to the wireless network
original title: program compatibility Application Sonos system after installing the update to sonos?
My software of somos 3A stopped connecting my wireless net work yo after than the new sonos updated. He says he's now bundles,
Have you checked with the support of Sonos?
-steve -
DynDNS is online but cannot connect from the external network
I've set up DDNS the modem. IP is available but I can't connect external network.
Hello
Thanks for posting your query in the Microsoft Community Forums.
The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums.
http://social.technet.Microsoft.com/forums/en-us/category/windowsxpitpro
It will be useful.
Let us know if you encounter problems under windows in the future. We will be happy to help you.
-
ErrorA dn network troubleshooting cannot connect to the wireless network
An error occurred during the loading of the troubleshooting tool
An unexpected error has occurred. The Troubleshooting Wizard can not continue.
Identifier of the package: unknown
Path: C:\Windows\diagnostics\system\networking
Error code: 0x8007045A
Source: command line
User: Daniel-PC\Daniel
Context: restricted
Help I got this error when I tried to fix my internet because I couldn't connect to any network.
I am running windows 7
I'm sorry, because I really need to use the Internet, I solved the problem of restoration Windows, so I can't try your method.
Thank you for the answer to my urgent help!
Kind regards
Daniel Lin
Maybe you are looking for
-
I had my router and the network off to bad weather. I run a mono wall and netgear WNDR3400, router. I reactivate them after the storm passes and some how my computer resets to 20 July 2002. My CMOS battery is correct setting of ideas how this could h
-
Windows XP system restore Boot Failure with new hard drive
HP Touchsmart IQ546t running Windows XP Home Edition Here is my story: A few months ago my PC was informing me that a hard disk failure is imminent and how can I back up my data. I was able to get most of the data backed up and has continued to use t
-
Is it possible to run legacy MS-DOS on Windows 7 Home Premium, 64-bit O applications
It is an old MSDOS executable program that went well in Windows 98SE and Windows XP SP3, but not in Windows 7. (This application works from a file on the C:\ drive, not in program files) I tried the compatibility troubleshooting option, but to no ava
-
Windows 8: need for Canon Laser Shot LBP-1120 printer driver
I turned on my printer, the other day for the first time since the installation of Windows 8, and nothing happened. XP drivers I used do not work, or no Vista I found drivers. Does anyone has experience of this printer with Windows 8, or may suggest