Exception: Access to EIP Violation (0xC0000005) = 0x7198AE7A

Hi all

Exception: Access to EIP Violation (0xC0000005) = 0x7198AE7A

I make this mistake occurs on running on the version of the runtime the application after 4 days and close.  Attached is the screen shot reports and relevant.

With this application, I use cRio9075 with the Ni9425 and NI 9476 modules.

Thank you

Hello

you have LabVIEW Desktop execution Trace Toolkit? This could be a good idea to launch this program, while yours is running to see the errors, leaks memory, the memory allocations... etc. For example, if you do not close a reference, this program will show you the problem...
I hope this will help you.

Tags: NI Software

Similar Questions

  • Exception: Access to EIP Violation (0xC0000005) = 0x7752D968 when tried to run the application in DV

    Hello

    I a VI with subVIs using the node library function call. I use user32.dll in the application.

    When I run the main VI in the mode of development, there is no error and everything works fine. But when I create the app and try to run, application falls down and after error popup:

    "Exception: EIP = 0x7752D968 access violation (0xC0000005)".

    LV log attached

    Kyle97330 wrote:

    I had a problem like this once when I built the app it would include a DLL with the build system.  I think that the EXE did not run a DLL in the system directory of a system no.  I'm done by ticking the 'specify the path on the schema' to the call of the DLL and then excluding the DLL to the build.

    The call is then looked like this:

    It is really a workaround and Rube Goldberg solution too.

    The correct solution to this is only specify user32.dll as the name of the library and not all the way in the system directory in the configuration node dialog box call library.

    You can also simply specify a constant path on the diagram with only the name of the DLL itself speak to what you were doing, but without the need to question the path for basic system libraries, but specifying the name only in the name of the configuration library is also enough.

    When you specify only the name of the DLL without a path, the LabVIEW application Builder assumes that it is a system file and does NOT include it in the build directory. Copy any system files in your directory is never a good idea, since Windows then merges. In addition, it is actually a violation of license to copy the system files and distribute them.

  • Software BlackBerry cannot connect to the BB to BB link identification service after that PeerManager caused an Access Violation (0xc0000005)

    Downloaded and installed the latest version of BB link V 1.2.2.13 on my PC under Win XP SP 3 no noted problem.
    I just bought a new Z10 which has the last OS 10.2.
    Gets a BB ID and I am able to log in via the Z10, as well as via the browser (Firefox) on my PC.
    When I start BB link and select Sign In, I do not get a prompt for my BB ID or a password.
    I get a screen that says "unable to connect to your Blackberry ID confirm that you're connected to the Internet and try again."

    I can connect my Z10 to BB Link (via USB). The Z10 is detected and I can synchronize.
    Then, I created log files.
    The PeerManager_ERRORLOG. Text says that
    PeerManager caused an Access Violation (0xc0000005)
    in the PeerManager.exe module to 001 b: 004093a 8 CurrentThread:0000071 C.

    Considering the Knowledge Base of Blackberry without result.

    How do I get this resolved?

    Can I submit an incident report?

    The problem was solved by upgrading from Windows XP to Windows 7.

  • While playing axis & allies game I get this error message "thread PRINCIPAL caught unhandled exception: Access Violation (C0000005) trapped in 1 B: B3FF94".

    I have an old axis & game cd-rom of the allies that gives me a fit. I get an error message and instructions on what to do, but there is no what to do. So, here is what the error looks like with bells and whistles of boxes/windows.

    Fatal error of initialization:

    thread HAND caught unhandled exception: Access Violation (C0000005) trapped in 1 B: B3FF94

    Then, he wants me to send log files that do not exist to "Atari." Heres so I know... This error is an access violation, which means that a certain part of the space no longer exists on my computor. Is there any help?

    Running win 7. must use compatibility to run cd rom.

    It allows to run fine with no probs.

    Thanks in advance for any advice.

    Original title: can not play my game development boo hoo...

    HI U.C.Newman,

    Thanks for the reply.

    Glad to know that you were able to solve the problem. Your efforts to solve this problem is appreciated. Feel free to post your request here on the Forums of Windows, we would be happy to help you.

    Thank you.

  • 'C0000005' exception Access Violation error when I open application of embroidery

    In order to open my application of embroidery (which is used to run), I get the following:

    Exception code: C0000005

    Exception flags: 0

    The exception address: 00614ED8

    Number of settings: 2

    Start address: 0048CA 00

    Exception offset: 001884DB

    What can I do to correct this problem and get the app to run?  I already uninstalled and re-installed.

    Are which embroidery application you referring?

    You can contact support for the application of embroidery software and check

  • SeqEdit Crash - access violation (0xC0000005)

    I have a very bad problem: when I open TestStand and click on any step that uses the adapter of LabVIEW, TS crashes with this message:

    It only happens when I click on stage with adapter for LabVIEW. Everything else works fine.

    ... Help!

    OK, crash report indicated a problem with the runtime LabVIEW ('"tdtable.tdr" file missing to be exact). RTE reinstall helped. Interestingly, the missing file belonged to RTE of 2014, and he caused the crash as early as 2013 TENS (or LV 2013 Dev System) has been defined in the LabVIEW adapter options.

    (Also: Thanks Daniel-E to help with this problem )

  • access to address violation

    Windows XP Service Pack 3. When I try to call a Crystal (the end-user software) report I get 'access to the 16C58BD5 address violation.  Write to the address 33003600. How can I fix?

    We need the DMP file because it contains the single record of the sequence of events that led to the accident, what drivers have been loaded, and what has been loaded.

    If you are overclocking STOP

    You may be able to get the DMP files without crashing by booting in SafeMode (F8) with networking.

    Please follow these instructions to collect data against crashes and upload them here, to your Skydrive or a service such as Rapidshare file sharing.

    http://www.SysNative.com/forums/showthread.php/68-blue-screen-of-death-%28BSOD%29-posting-instructions-Windows-8-7-amp-Vista?p=303&viewfull=1#post303

    http://SysNative.com/0x8/BSOD_Windows7_Vista_v2.64_jcgriff2_.exe

    To allow us to help you with symptoms BSOD on your computer, download the contents of your folder "\Windows\Minidump".

    The procedure:

    * Copy the contents of \Windows\Minidump to another location (temporary) somewhere on your machine.
    * Zip up the contents of this folder
    Please, upload to skydrive or a file sharing service and put a link to them in your next post.

    Go to start > search/run > cmd > msinfo32 and include it in the upload

    To ensure the minidumps are enabled:

    * Click Start, in the search box, type: sysdm.cpl, press ENTER.
    * On the Advanced tab, click Startup and recovery... Settings button.
    * Make sure that automatically restart is unchecked.
    * Under the writing debugging information header, select image partial memory (256 KB) in the list box drop-down (varies from 256kb).
    * Ensure to that small Dump Directory is listed as % systemroot%\Minidump.
    * OK your way out.
    * Reboot if changes have been made.

    http://www.SysNative.com/forums/showthread.php/325-BSODs-but-no-dump-files

    http://www.osronline.com/article.cfm?article=545

  • Oracle GoldenGate Veridata Exception (access denied)

    Hi all

    I recently installed weblogic 12.1.3 and Goldengate Veridata server on a Linux machine with success and then successfully created a domain server to administer Veridata. After the opening of the Veridata Web console with the user newly created of Weblogic Server with all privileges of the veridata administration, in the new wizard connection, shows veridata special suite.


    OGGV-00184: Error Message: com.goldengate.wallet.WalletException: OGGV-80002: put the credentials for conn. IRIS2 failed: access denied ("oracle.security.jps.service.credstore.CredentialAccessPermission" "context = UNIT, mapName = VERIDATA, keyName = CONN. IRIS2' 'write').

    You have the wrong java version, which I assume is java8 which is not taken in charge for 12 c yet so downgrade to java 7. Don't know what flavor your OS, it is that I used this How-to Install Java 7 (Jdk 7u75) on CentOS/RHEL 7/6/5 and restarted downgraded java my weblogic and everything worked as expected.

  • Labview 2014 crash

    Nice day

    I got an error when running VI (picoscope 5000EaxampleBlock vi) using LabVIEW2014 (LabVIEW crash) that also were carried out using a PIcoscope 5000 series counter

    Exception: Access to EIP Violation (0xC0000005) = 0 x 0000000100000000

    version: 14.0 (64-bit)

    also attached log Lv and Subvi.

    Can anyone advice on this...

    Better compliance

    AhmadTarmimi

    Universiti Teknologi Malaysia

    Without seeing the drivers of your reach, it's just speculation...

    Any time I have seen an accident like that of pilots, it was a call to a DLL that caused the problem. It may be that you run LV 64-bit tent called a 32-bit of the driver DLL.

  • Application builder does not

    Hi people.

    I can't build this application. When I try and open it I get the following error (also attached).

    Exception: Access to EIP Violation (0xC0000005) = 0x772D8E19

    Version: 1.0.0.0

    When I run like a VI in labview, it works very well without any problems, but when I build it with the application builder I can not open the .exe file.

    The project is only 1 VI, which opens an executable file from the command line, implements a few keys to generate a QR code in the file called, then cropps it and saves it.

    Is this something to do with how I'm building the application. If it works in labview surely it should work when built.

    I've built other projects from the command line, use the .exe and they open very well, but I can't talk about it.

    Any help would be greatly appreciated.

    Select this option.

    Code too sequential sems with many duplicate ode and it uses 100% of CPU core when doing nothing. There should be a small wait in the case of fake of big business structure. Couldn't you mix together into a single table U8 once and use a single autoidenxing FOR loop? Code would take on a postcard! I would use also "build path" to create paths.

    In any case, why the UIBC use a relative path ("...) "" "\Windows\System32\user32.dll")? Try changing it to 'user32.dll' instead.

  • max access violation or

    Hello

    All of a sudden NI Max stopped working on one of my development machines. Wont start, it goes directly to the journalist of Crash NI MAX. Exception: Access to EIP Violation (0xC00000005) = 0x6AC6DD70

    I tried to reinstall NI Max (by Installer configuration system). I uninstalled all the software of NOR and reinstalled. I reinstalled Visual Studio 2010 (which was on the computer). I searched old files pdm.dll, is the most in 2009, but most are from 2013.

    The computer is a virtual machine (vmware fusion) running Windows 7. NI MAX version is 5.6.0f0 and the rest of the software NOR were versions of 2013.

    I also have another virtual machine with the installation of 2013 and the same version of NI MAX I get the same error here. My 2015 machine works well with MAX OR commissioning without problems.

    Two machines that will not start on MAX worked without problem for a few years, it emerges just yesterday.

    Anyone have come across this and have an idea of what to do?

    Best regards

    Nimgaard

    After other started applications failing as well, I found a trick that might help to upgrade vmware tools to the virtual machine.

    He did, and now its working again.

    Could be useful for those who are experiencing the same problem.

  • CVI executable causes an on update of Windows 10 anniversary 0xC0000005 Access Violation.

    Created executables always causes an Access Violation (0xc0000005 exception) to the closing period on Windows 10 RS1 (update of the anniversary).

    This problem occurs in LabWindows CVI 2015 and 2015 SP1.

    How to reproduce: simple program to create and compile with the (x 86) release profile by default.

    for example:

    #include "test.h".

    int ph;

    int __stdcall WinMain (HINSTANCE hInstance, HINSTANCE hPrevInstance,
    LPSTR lpszCmdLine, int nCmdShow)
    {
    If (InitCVIRTE (hInstance, 0, 0) == 0)
    Returns - 1; / * memory * /.

    pH = LoadPanel (0, "test.uir", group of EXPERTS);
    DisplayPanel (ph);
    RunUserInterface();

    return 0;
    }

    int CVICALLBACK CallExit (int, int int event, control panel,
    void * callbackData, int eventData1, int eventData2)
    {
    switch (event)
    {
    case EVENT_COMMIT:
    QuitUserInterface (0);
    break;
    }
    return 0;
    }

    The problem is visible on the control panel > reliability history > Error Reporting:

    Also the code of the executable file (exit code) is always 0xc0000005 instead of zero.

    To check out more easily code can be called the executable through file .bat:

    off @echo
    Test.exe
    echo ExitCode = %ERRORLEVEL%
    pause

    I have observed that if multiple instances of the same program are running, only block when the last instance is closed. It seems that the problem occurs at the time that the CVI runtime is released from the ram. (The latter is only a guess)

    Hello

    We did some research and saw that the failure is related to some police files in

    c:\Windows\SysWOW64\cvirte\fonts

    c:\Windows\System32\cvirte\fonts

    Could you try deleting these files and see if the heater is always performed. If this isn't the case, it would be a work around if you do not use these fonts.

    We continue the investigation to see the exact cause

  • Access violation on EIP - causing Crash

    I have a small VI who call the two APIs from a DLL. When I press on the register, the FI_Register_wrapper() is called, and when I press "Registration", FI_get_handle_by_name_wrapper() is called.  Two calls works perfectly. But when I close the the LabVIEW VI crashes. It gives an access to the error of the EIP violation. Help, please. I also included my VI.

    skariaroy wrote:

    We checked the library to find anywhere that the dll corrupts the memmory. We have tried several times using several tools and could not find any place where the dll corrupts the labview memmory. If the dll is perfect. It is not possible to write the things of all DLLs in LabVIEW. We have to code in C++, since we already have the dll.

    The fact that it crashes is enough evidence that your assertion that your DLL is perfect is not true! It's as simple as that!

    skariaroy wrote:

    CameraServices * cs = new CameraServices (name);
    Return FI_OK;

    reffrering the above code belonging to a dll. If I come back from service before allocating a memmory of type CameraServices *, not crash the program. Education CameraServices * cs = new CameraServices (name). makes the application crash. It is just a memmory allowance. Why LabVIEW even cares it?

    LabVIIEW only cares memory allocation! This is memory allocated your DLL and LabVIEW is happy to let this memory alone. No doubt well, what happens is something to this appeal does not behave properly and is damaging the memory that it does not have touch! It could be that the name parameter is something that you think it should be, and that therefore not spend you wrongly LabVIEW to your DLL, or it could be as simple as a bug in the constructor of this class. Or something added recognition as a pilot of the incompatibilities in the lower level components of your CameraServices class.

    An additional note: the code you write he will flee the CameraService object whenever you call this function. Which will not cause LabVIEW to plant well (not quickly at least until missing memory).

    I can assure you with certainty of 120%: this is not benevolent LabVIEW that you create an object of type CameraClass in your code, but it's something in the code that you have written or in code you call who misbehaves. And unfortunately your observation is not sufficient to identify the cause certainly. Leaving further appeal may seem to solve the problem, but the reality is that the bug can be somewhere completely elsewhere in your code, but leaving far who call the provision of memory is also rearranged and your bug will damage the other memory not as an essential element for LabVIEW. He can always down sooner or later.

    And it is not for lack of LabVIEW that you don't have to worry about these troubles when programming in LabVIEW. But you are programming in C (++) now, and that comes with its own and many more unpleasant questions!

  • Access to the path 'C:\ProgramData\ATI\ACE\Profiles.xml' is denied.

    Original title: Hi I have a problem of AceEventlog of program data, access is denied for the CCC, I guess anyway I'll post the log.

    I've updated the drivers recently CCC 10.8 and now I have a bunch of papers in the journal of AceEvent, any help would be great. Log name: ACEEventLog
    Source: ACEEventLogSource
    Date: 2010-09-12 12:45:46
    Event ID: 0
    Task category: no
    Level: Information
    Keywords: Classic
    User: n/a
    Computer: SavannahMick-PC
    Description:
    0000000241: 2010-09-12 12:45:46:281 Exception: access to the path 'C:\ProgramData\ATI\ACE\Profiles.xml' is denied.
    Called by exception: ATI. ACE. APM. ProcessID:03780 threadID :) server. XmlDocumentSaver::SaverWorker domain name::(APM.) assemblyName (CCC.exe) Server, Version = 2.0.3867.36565, Culture = neutral, PublicKeyToken = 90ba9c70f846762e)
    ************************************************************************************************************************

    The event XML:
    http://schemas.Microsoft.com/win/2004/08/events/event">
     
       
        0
        4
        0
        0 x 80000000000000
       
        10312
        ACEEventLog
        SavannahMick-PC
       
     

     
        0000000241: 2010-09-12 12:45:46:281 Exception < save the Xml Document >: access to the path 'C:\ProgramData\ATI\ACE\Profiles.xml' is denied.
    Called by exception: ATI. ACE. APM. ProcessID:03780 threadID :) server. XmlDocumentSaver::SaverWorker domain name::(APM.) assemblyName (CCC.exe) Server, Version = 2.0.3867.36565, Culture = neutral, PublicKeyToken = 90ba9c70f846762e)
    ************************************************************************************************************************

     

    Hi SavannahMick,

    The entries refer to the drivers/files associated with the ATI. There are some useful suggestions in the forum link below. See if one of them works for you.

    Thousands of events ati2mtag 62464 s (DVD_OV UVD Information) in the system event log

    The CCC does not open after 10.8

    Catalyst Control Center (CCC.exe and MOM.exe) keep quit

    Kind regards

    Shinmila H - Microsoft Support

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Cisco router some computers were able to access the internet.

    I'm having a weird problem recently that some computers were unable to browse some site. I even try to put in place a different router from cisco (cisco 2811) with IOS version 15.0 and the same configuration but still no luck. Tried to reboot all devices and I also try to use the computer that is having problem to access the web connect directly to the router, but the result is the same. FYI the router being works well for a month a few without this problem. I try to use the inexpensive router like the dlink / tplink and there is no problem. Another piece of information, it's the computer that could not browse some site were able to ping the website, but fail to load in the web browser. 10 computer there are 3 unit have this problem and new features such as my customer/guest computer also were unable to browse some site. There are no firewall or any security in our regard. It makes me crazy!

    My circuit diagram as below;

    WAN-> router (Cisco 2821)-> switch-> computer

    -See the version-

    Cisco IOS software, 2800 Software (C2800NM-ADVENTERPRISEK9-M), Version 12.4 (24) T6, VERSION of the SOFTWARE (fc2)
    Technical support: http://www.cisco.com/techsupport
    Copyright (c) 1986-2011 by Cisco Systems, Inc.
    Updated Wednesday, Aug 23, 11 01:30 by prod_rel_team

    ROM: System Bootstrap, Version 12.4 (13r) T, RELEASE SOFTWARE (fc1)

    Linear_Router uptime is 2 weeks, 3 days, 21 hours, 56 minutes
    System return to the ROM to reload at 12:49:51 MAS Thu Sep 1 2016
    System image file is "flash: c2800nm-adventerprisek9 - mz.124 - 24.T6.bin".

    This product contains cryptographic features and is under the United States
    States and local laws governing the import, export, transfer and
    use. Delivery of Cisco cryptographic products does not imply
    third party approval to import, export, distribute or use encryption.
    Importers, exporters, distributors and users are responsible for
    compliance with U.S. laws and local countries. By using this product you
    agree to comply with the regulations and laws in force. If you are unable
    to satisfy the United States and local laws, return the product.

    A summary of U.S. laws governing Cisco cryptographic products to:
    http://www.Cisco.com/WWL/export/crypto/tool/stqrg.html

    If you need assistance please contact us by mail at
    [email protected] / * /.

    Cisco 2821 (revision 53.51) with 249856K / 12288K bytes of memory.
    Card processor ID FHK1235F3T0
    2 gigabit Ethernet interfaces
    2 interfaces Serial (sync/async)
    1 ATM interface
    1 module of virtual private network (VPN)
    Configuration of DRAM is wide with parity 64-bit capable.
    239K bytes of non-volatile configuration memory.
    1000944K bytes of ATA CompactFlash (read/write)

    Configuration register is 0 x 2102

    -show running-config-

    Building configuration...

    Current configuration: 8378 bytes
    !
    version 12.4
    horodateurs service debug datetime msec
    Log service timestamps datetime localtime
    encryption password service
    !
    hostname Linear_Router
    !
    boot-start-marker
    start the flash system: c2800nm-adventerprisek9 - mz.124 - 24.T6.bin
    boot-end-marker
    !
    forest-meter operation of syslog messages
    logging buffered 16000
    enable password 7
    !
    AAA new-model
    !
    !
    AAA authentication login sdm_vpn_xauth_ml_1 local
    AAA authorization sdm_vpn_group_ml_1 LAN
    !
    !
    AAA - the id of the joint session
    clock timezone 8 MAS
    !
    dot11 syslog
    IP source-route
    !
    !
    IP cef
    No dhcp use connected vrf ip
    dhcp IP 30 binding cleanup interval
    DHCP excluded-address IP 192.168.88.1 192.168.88.141
    DHCP excluded-address IP 192.168.88.180 192.168.88.254
    !
    pool of dhcp IP LAN
    network 192.168.88.0 255.255.255.0
    router by default - 192.168.88.254
    domain losb.local
    Server DNS 8.8.8.8 8.8.4.4
    0 0 15 rental
    !
    !
    IP domain name losb.local
    8.8.8.8 IP name-server
    IP-server names 8.8.4.4

    !
    No ipv6 cef
    !
    Authenticated MultiLink bundle-name Panel
    !
    !
    !
    !
    !
    !
    !
    !
    !
    !
    !
    !
    !
    !
    !
    !
    !
    !
    !
    !
    !
    !
    !
    voice-card 0
    !
    !
    Crypto pki trustpoint test_trustpoint_config_created_for_sdm
    e subject name =[email protected] / * /
    crl revocation checking
    !
    Crypto pki trustpoint TP-self-signed-3132623275
    enrollment selfsigned
    name of the object cn = IOS - Self - signed - certificate - 3132623275
    revocation checking no
    rsakeypair TP-self-signed-3132623275
    !
    !
    for the crypto pki certificate chain test_trustpoint_config_created_for_sdm
    TP-self-signed-3132623275 crypto pki certificate chain
    certificate self-signed 01
    30820250 308201B 9 A0030201 02020101 300 D 0609 2A 864886 F70D0101 04050030
    2 060355 04031326 494F532D 53656 C 66 2 AND 536967 6E65642D 43657274 31312F30
    69666963 33313332 36323332 6174652D 3735301E 170 3134 31323032 31393436
    35385A 17 0D 323030 31303130 30303030 305A 3031 06035504 03132649 312F302D
    4F532D53 5369676E 656C662D 43 65727469 66696361 74652 33 31333236 65642D
    32333237 3530819F 300 D 0609 2A 864886 01050003, 818, 0030, 81890281 F70D0101
    8569B 674 5F07B434 8E5F9D59 D298DB7E 51FBB58A B 460084 9 34AE8461 8100D01A
    471637 C F6CFC65F 9639C1C6 2 50CF9117 D459482F 1EF22E29 322F39AA 88 42306
    F4B6686A 161FDD3D 69B0647B 46FC7CD0 966C03E8 D6CF9181 8E2B3514 300D980B
    EE9225A6 173F7673 655A1DE8 FB720F13 0FD8E550 A7DDB314 50461510 A72C5DBE
    010001A 3 78307630 1 130101 FF040530 030101FF 30230603 0F060355 A1CF0203
    551D 1104 1C301A82 184C696E 6561725F 526F7574 65722E6C 6F73622E 6C6F6361
    23 04183016 8014FA7F D98E6D69 462EEAED 41BEC8D3 7042F812 03551D 6C301F06
    95B3301D 0603551D 0E041604 14FA7FD9 8E6D6946 2EEAED41 BEC8D370 42F81295
    B3300D06 092 HAS 8648 01040500 03818100 043EC1A4 7363A7FD 3AED777D 86F70D01
    CAAEC570 99 HAS 02166 A3958A66 0E5A5DD2 368C2F8B D9A96E69 9F57852C ACE0C67F
    73 D 17753 53BE14C4 824BE043 B8A52822 E38DBC3C C3F33787 813FD207 0AB04004
    E0303A2F 2A3BF5AA 81481429 F53C1EDD 8AC2EC48 D64DF89A 4D047B7C 6B 516970
    55EAFF10 B1453DBD ABC96845 FDF7AAF9 77B8C381
    quit smoking
    !
    !
    password username privilege 15 7 kent
    Archives
    The config log
    hidekeys
    !
    !
    crypto ISAKMP policy 1
    BA 3des
    preshared authentication
    Group 2
    !
    Configuration group customer crypto isakmp 11
    11 key
    DNS 8.8.8.8 8.8.4.4
    losb.local field
    pool SDM_POOL_1
    ACL 100
    Max-users 11
    ISAKMP crypto sdm-ike-profile-1 profile
    identity group game 11
    client authentication list sdm_vpn_xauth_ml_1
    ISAKMP authorization list sdm_vpn_group_ml_1
    client configuration address respond
    virtual-model 1
    !
    !
    Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac
    !
    Profile of crypto ipsec SDM_Profile1
    game of transformation-ESP-3DES-SHA
    isakmp-profile sdm-ike-profile-1 game
    !
    !
    Crypto ctcp port 10000
    !
    !
    !
    !
    !
    !
    interface GigabitEthernet0/0
    Description of connection WAN to Unifi BTU
    no ip address
    no ip-cache cef route
    no ip route cache
    automatic duplex
    automatic speed
    No mop enabled
    !
    interface GigabitEthernet0/0.500
    encapsulation dot1Q 500
    no ip route cache
    PPPoE enable global group
    PPPoE-client dial-pool-number 1
    !
    interface GigabitEthernet0/1
    internal network LAN Description
    IP 192.168.88.254 255.255.255.0
    IP access-group UDP/TCP in
    IP nat inside
    IP virtual-reassembly
    no ip-cache cef route
    no ip route cache
    automatic duplex
    automatic speed
    !
    ATM0/0/0 interface
    no ip address
    Shutdown
    ATM 300 restart timer
    No atm ilmi-keepalive
    !
    interface Serial0/1/0
    no ip address
    Shutdown
    2000000 clock frequency
    !
    interface Serial0/1/1
    no ip address
    Shutdown

    2000000 clock frequency
    !
    type of interface virtual-Template1 tunnel
    11 description
    Dialer1 IP unnumbered
    ipv4 ipsec tunnel mode
    Tunnel SDM_Profile1 ipsec protection profile
    !
    interface Dialer1
    the negotiated IP address
    IP mtu 1480
    NAT outside IP
    IP virtual-reassembly
    encapsulation ppp
    Dialer pool 1
    Dialer idle-timeout 0
    persistent Dialer
    Dialer-Group 1
    PPP authentication chap callin pap
    PPP chap hostname [email protected] / * /
    password PPP chap 7 15381
    PPP pap sent-username [email protected] / * / 132F0 password 7
    !
    local IP SDM_POOL_1 192.168.88.130 pool 192.168.88.141
    default IP gateway - 192.168.88.254
    IP forward-Protocol ND
    IP route 0.0.0.0 0.0.0.0 Dialer1
    IP http server
    local IP http authentication
    IP http secure server
    !
    !
    overload of IP nat inside source list Internet_List interface Dialer1
    IP nat inside source static tcp 192.168.88.89 8001 interface 3389 Dialer1
    IP nat inside source static udp 192.168.88.89 8001 interface 3389 Dialer1
    IP nat inside interface 80 static udp 192.168.88.102 source Dialer1 5555
    IP nat inside source static tcp 192.168.88.102 80 5555 Dialer1 interface
    IP nat inside source static tcp 192.168.88.90 80 Dialer1 8080 interface
    IP nat inside interface 80 static udp 192.168.88.90 source Dialer1 8080
    IP nat inside source static tcp 192.168.88.101 interface 8888-8888 Dialer1
    IP nat inside source static udp 192.168.88.101 interface 8888-8888 Dialer1
    IP nat inside source static tcp 192.168.88.101 80 Dialer1 7777 interface
    IP nat inside interface 80 static udp 192.168.88.101 7777 Dialer1 source
    !
    Internet_List extended IP access list
    IP 192.168.88.0 allow 0.0.0.255 any
    !
    Access-list 100 = 4 SDM_ACL category note
    access-list 100 permit ip 192.168.88.0 0.0.0.255 any
    Dialer-list 1 ip protocol allow
    !
    !
    !
    !
    !
    !
    control plan
    !
    !
    !
    !
    !
    !
    !
    !
    !
    Banner motd ^ CC
    #####################################################################
    #                            WARNING!!!                             #
    # This system is for the use of only authorized customers.        #
    # Who is using the computer network system without #.
    authorization of #, or their permission, are #.
    # subject to having their activities on this computer.
    # Network monitored and recorded by system #.
    staff of #. To protect the computer network system of #.
    # unauthorized use and to ensure that computer network systems #.
    # does not work properly, system administrators monitor this #.
    system of #. Anyone using this computer system #.
    # consents to such monitoring and is expressly informed that #.
    # If this control reveals possible criminal conduct.
    activity #, the system can provide evidence of #.
    # This activity to police officers.              #
    #                                                                   #
    # Access is limited to authorized users only.           #
    # Unauthorized access is a violation of # State and federal.
    # civil and criminal.                       #
    #####################################################################^C
    !
    Line con 0
    line to 0
    line vty 0 4
    privilege level 15
    password 7
    transport input telnet ssh
    exit telnet ssh transport
    !
    Scheduler allocate 20000 1000
    NTP-Calendar Update
    end

    Hello

    try changing the size of the "ip mtu" on your Dialer interface to 1492, and/or the 'ip tcp adjust-mss' on your GigabitEthernet interfaces to 1452 and see if that makes a difference.

Maybe you are looking for