Excessively the CPU usage high on my Equium M70

Similar Questions

• "The CPU usage high" during navigation

  What"the CPU usage high" and why is it when just browsing - is harmful and how to reduce it down? Thank you

  Follow the steps mentioned in the articles below provide

  http://www.ehow.com/about_5552689_cpu-usage-high-Vista.html

  http://www.ehow.com/how_5066314_stop-100-percent-CPU-usage.html

• When Windows starts it is always a dialogue box that flashes on the screen and the CPU usage high (above 50%), after I connect sometimes for several minutes.

  Original title: at the start of Windows there is always a dialogue box that flashes on the screen, but I've known idea what it is.

  How can I determine which program is using this dialog box? I also don't expect high utilization of the processor (over 50%) after that I connect sometimes for several minutes. I see not all applications running in the Task Manager. The amount of CPU utilization in the services tab doesn't match what I see compared to what the gadget is read in my sidebar. Any ideas?

  Thanks in advance

  Hi Soan,

  1. What is exactly mentioned in the dialog box?

  2. when the problem started?

  3. did you of recent changes on the system?

  Method 1:

  Step 1:

  You can check if the problem occurs in safe mode.

  Start your computer in safe mode

  Step 2:

  If you are not faced with the question in safe mode, you can perform a clean boot and check.

  A clean boot to check if startup item or services to third-party application is causing this issue.

  You can read the following article to put the computer in a clean boot:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  After the troubleshooting steps, please refer to clean the boot link to put the computer to normal startup mode.

  Method 2:

  You can read the following article and perform a full scan of security on your computer.

  Microsoft safety scanner

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss. You can take a backup of important data before performing analysis.

  Method 3:

  You can also read the following article and try to optimize the performance of Windows Vista.

  Optimize the performance of Microsoft Windows Vista

  Hope this information is useful.

• The CPU usage high mad after DL anti virus

  Hi, I hope someone can help me! I have an XP machine running Microsoft Security Essentials for a long time without any problem. Recently, my PC slowed to a crawl, so I ran the utility system to clean programs, disk clean up/Defrag, etc. I then noticed by Control Alt Delete I had a program that took a ton of memory. I googled the program and (sorry don't have the name because I am now in a different pc). But Google search resulted in the guilty being Security Essentials. I removed SE and downloaded Nod32 and had the same problem, although this time the culprit was nod32. I am under SP3 and am very * on updates, etc. I have that turns off the PC until I know what is the cause. It seems that no matter what AV program installed my machine is very slow. Any ideas or suggestions? Thank you!

  The specs of this machine are?

  • Processor (manufacturer, number of cores, speed)?
  • Amount of (RAM RAM)?
  • Manufacturer of the video card (* is shared with system memory)?
  • Size of the hard disk (free space total and current)
  • Windows XP is at least patched with Service Pack 3?

  Download (FREE) MalwareBytes and SuperAntiSpyware (FREE) on another computer and carry them / set them on the first computer and perform complete system analysis - remove anything they find.

  Perform a full scan of the system with eSet NOD32 antivirus - it may take some time.

  Defragment the hard drive.

  CHKDSK of the hard drive.

  Use AutoRuns to determine that everything is put into service with the system or when you connect and then reduce how much starts until you need by changing the configuration of applications you need not necessarily to start up every time.

  Have you ever visited the system manufacturer (or its components manufacturer (s)) to check if they have newer drivers for the hardware on your system for Windows XP?  Motherboard chipset, video, peripheral device audio, network device and the likes?

  If you're low on space (or simply to clean):

  If you are comfortable with the stability of your system, you can delete the uninstall of patches which has installed Windows XP...
  http://www3.TELUS.NET/dandemar/spack.htm
  (Especially of interest here - #4)
  (Variant: http://www.dougknox.com/xp/utils/xp_hotfix_backup.htm )

  You can run disk - integrated into Windows XP - cleanup to erase everything except your last restore point and yet more 'free '... files cleaning

  How to use disk cleanup
  http://support.Microsoft.com/kb/310312

  You can disable hibernation if it is enabled and you do not...

  When you Hibernate your computer, Windows saves the contents of the system memory in the hiberfil.sys file. As a result, the size of the hiberfil.sys file will always be equal to the amount of physical memory in your system. If you don't use the Hibernate feature and want to reclaim the space used by Windows for the hiberfil.sys file, perform the following steps:

  -Start the Control Panel Power Options applet (go to start, settings, Control Panel, and then click Power Options).
  -Select the Hibernate tab, uncheck "Activate the hibernation", and then click OK. Although you might think otherwise, selecting never under "Hibernate" option on the power management tab does not delete the hiberfil.sys file.
  -Windows remove the "Hibernate" option on the power management tab and delete the hiberfil.sys file.

  You can control the amount of space your system restore can use...

  1. Click Start, right click my computer and then click Properties.
  2. click on the System Restore tab.
  3. highlight one of your readers (or C: If you only) and click on the button "settings".
  4 change the percentage of disk space you want to allow... I suggest moving the slider until you have about 1 GB (1024 MB or close to that...)
  5. click on OK. Then click OK again.

  You can use an application that scans your system for the log files and temporary files and use it to get rid of those who:

  CCleaner (free!)
  http://www.CCleaner.com/
  (just disk cleanup - do not play with the part of the registry for the moment)

  Other ways to free up space...

  SequoiaView
  http://www.win.Tue.nl/SequoiaView/

  JDiskReport
  http://www.jgoodies.com/freeware/JDiskReport/index.html

  Those who can help you discover visually where all space is used.

• Satellite A45 - the CPU usage is high and slow applications

  Hi all

  I'm trying to debug a hardware problem on my Toshiba Satellite A45. I am running Ubuntu 10.04, but I don't think that it's operating system or related software.

  THE PROBLEM: The CPU usage is high and applications slowly to a crawl after using an intensive application of memory for a few minutes, i.e. to watch a video or a game. Basically, anything that could use the screen much. If instead, I work only from a prompt, even when the application could do a lot of work, I do not encounter this problem. After stopping all applications, the CPU usage is always higher than normal (90% idle, should normally be slowed down to about 99%).

  Xorg now typically showing about 6% (normally use< 2%).="" if="" i="" at="" any="" time="" after="" this="" try="" to="" work="" in="" any="" application,="" usage="" is="" still="" bogged="" down.="" only="" a="" reset="" gets="" me="" back="" to="">

  Note: My system has always worked very well and I did not made the installation of the software or changes when it started to happen.
  However, the laptop is a 800 miles round trip at the rear of the car in a padded bag.

  DEBUG: This doesn't seem to be the RAM that I replaced the RAM and reinstall the RAM, and the problem persists. This doesn't seem to be the hard drive that I can try to run it from a Live CD (without use of HARD drive) and yet everything slows to a crawl.

  HELP: I don't know how to debug from here.
  I don't have extra pieces of hardware to make swaps.

  Any ideas more how to debug this?

  Thank you
  Grommit

  Hello

  > I am running Ubuntu 10.04, but I don't think that it's operating system or related software.
  It s interesting why you think that this may be software related issue

  I think that it is a typical software problem because the RAM and the HARD drive has been verified you have reported this in the message

  So what to say maybe some virus or malware likely to obstruct the CPU and the memory usage
  Or there is some process in the background that are not properly

  I recommend you to reinstall the Windows operating system or another distribution of Linux that runs NO Live CD, but which is installed on the HARD drive
  I m sure that s kind of the process that is disabled and crashes somewhere in the background

• CPU problem. The CPU usage is erratic and the RAM is regularly high

  CPU question

  I can't navigate with my huge memory and laptop good performance because the CPU usage is erratic and the Ram memory is regularly high. For now, 1.7Gigs is my memory on my 3 GB of ram. How can I solve this problem? My computer problems are related to the navigation.

  Hi Sean,.

  ·         Since when are you facing this problem?

  Method 1: Start your computer in safe mode to check the issue. Report of the results.

  Method 2: Run the next Fixit tool to check the issue.

  Difficulty of Windows system performance slow computer problems

  Method 3: Check to see if this article helps you.

  Optimize Windows Vista for better performance

• (Redirected) Computer beeps during use. Maybe high disk or the use of the CPU usage?

  New here and new to Dell computers. 1st stop, I have a Dell XPS 13 "i7 6560u 16 GB and SSD 512. When using the computer, I get a series of 2 beeps. It seems to be related to the high use of the disc or the CPU usage. I guess my question is possible to put these notifications for a longer delay or at least decrease the volume of the beeps. I am aware that when I use one of my CSD programs to open a browser and looking for an answer to the question about what there will be times where I could get high uses a of these, that's all just annoying and not really want to turn them off entirely (option I would) I would delay having more time this will happen to until I get through this ,

  I thank you,

  Ben

  Hi w4qed,

  Please repost this in the laptop computer forum help.

  http://en.community.Dell.com/support-forums/laptop/f/3518

• the CPU usage is high

  If the CPU usage is high in esx server? HW can u determination say problem?

  ESXTOP is a tool through which you can know the CPU usage statistics in the process that is stealing cycles CPU. Alternatively, you can refer to this article that can help you debug the much deeper problem.

  http://KB.VMware.com/selfservice/microsites/search.do?cmd=displayKC&docType=kc&externalId=1077&sliceId=1&docTypeID=DT_KB_1_1&dialogID=215052615&StateID=1%200%20215056913

• The CPU usage is high even do nothing (MAC OSX)

  The developer of the FDI CPU usage is very high even you don't do anything, but left the IDE open after doing a db (Version of MAC OSX) connection.
  
  If programming in it that the CPU would keep more than 20%, is it problem of EDI or Java Mac problem?
  The Windows version is fine.
  
  Version 3.1.07.42
  10.7.3 OSX
  JDK is updated.
  
  Published by: user10244431 on March 8, 2012 22:32

  Hello

  It is a known issue on the Mac. The workaround is to set the tools | Preferences | Environment | Appearance: Oracle

  For more details: Re: 3.1EA1 - the CPU usage always high on Mac OS

  Kind regards
  Gary
  SQL development team

• Satellite R830-1GZ - CPU usage high (&gt; 25%) and increase in the speed of the fan after reactivation

  Hi all

  The CPU usage of my laptop shoots upward to 25% (and beyond) and increases in fan speed considerably after waking up, but only when I use an external mouse (Microsoft Natural Wireless Laser Mouse 6000) - disconnect the mouse once it happened does not solve the problem, so I always have to restart my computer if I let go sleep with the connected mouse.

  I noticed that when this produces the system interrupts - delayed appeals procedure and Interrupt Service routine appears in the resource monitor > CPU > process and seems to explain the increase in the use of the processor.

  Any ideas on how to solve this problem would be most appreciated.

  I use a Toshiba Satellite R830 1GZ with Windows 7 (64-bit). This problem will not occur when I use the same mouse with another laptop (Dell with Windows XP).

  Thank you very much.
  CM

  > The CPU usage of my laptop shoots upward to 25% (and beyond) and increases in fan speed considerably after waking up, but only when I use an external mouse (Microsoft Natural Wireless Laser Mouse 6000) - disconnect the mouse once it happened does not solve the problem, so I always have to restart my computer if I let go sleep with the connected mouse.

  I think that the process that controls the mouse MS WLan does not close properly.
  The system to memorize it and therefore the cooling module begins to spin faster because these processes stressed the central unit.

  Maybe its caused by the mouse driver
  Have you checked if there is an update to the driver?

• Satellite C650D - the CPU usage is jumping around

  I bought a Toshiba Satellite C650D 2 months ago and I used the Windows 7 that came with it, thinking that it was fine and dandy until a few days ago, he started having random lag spikes.

  At first he just happen when you watch movies (tried 4 different programs, all reinstalled the driver, scanned for malware, defragmented, you name) and then she started to occur outside the viewing of film aswell. Who did it for me, and I installed Windows XP. I did 3 times now, clean install it Windows XP. Initially, it seemed fine. For a few hours, and then it started lagging really bad, not like in Windows 7, but the CPU usage is jumping all over the boundaries between 1% and 99% at random, but there is no process to take it!

  He lags behind what I do, just open the Notepad can blow. I thought that it would work with a format clean, but no, of course the problem reoccured. It might be drivers, see problems in Windows 7 and XP are somewhat different. I'm in my intelligence ends here on what to do, whatever that is would be helpful.

  Hey Buddy,

  Looks like on your laptop is a background passes process that is causing this different and high CPU usage.

  What happens if you install Windows 7 Toshiba Recovery disk and look in the Manager of tasks? Directly after this installation, you should have a low CPU usage and stable because it s installation of Windows from Toshiba.

• Satellite A300-1IE - CPU usage high with Bluetooth active

  Hello!

  I recently installed Windows 7 and the Toshiba Software Installer on my Satellite A300-1IE.

  I have a problem with the bluetoothmanager, it's more than double the CPU usage when turned on. When I close the CPU usage goes down.
  This is not normal?

  When the BT active CPU usage is 9 to 15% and when not 1-3%

  Seems to be high. Try an update of the Bluetooth stack.
  http://APS2.toshiba-tro.de/Bluetooth/?page=download
  Ensure that you answer the question during the uninstallation, if all configurations should be removed, with Yes.

• Z220: The CPU utilization high idling: how to troubleshoot?

  My new Z220 with i5-3470 CPU, 16 GB RAM, Win 7 Pro 64-bit, shows a very high utilization of the processor idling: 35 to 39%, on average. I looked at the Win 7 performance monitor and there it shows system interrupts, in slow motion, a lot of 20-25% the use of the CPU, the system consumes 10 to 15%.

  A quick glance at a similar setup Z210 idling watch zero % CPU for the two system using interrupts and system.

  The Windows performance tool is not one I have a lot of experience with usage, but a few reports I generated show nothing obvious, at least not for me.

  Does anyone have advice about how to fix this?

  TIA!

  After a really long survey on Windows 7 drivers and others, HP advanced support Tech became convinced (as I pretty much was all the long...) that there actually is a hardware in-game problem: motherboard or the CPU. First level never support could go to the beyond notice of driver/Win 7 / background process 'normal', which I became finally found was not the case.

  The excellent technician sent by HP thought the CPU was a good place to start: it replaces, and as soon as voltage, all high utilization of the processor issues disappeared! I've been running the system for some hours, after reinstalling my extra system memory and card over-pants V4900 and the CPU is idle to 0-1 percent, with System Idle Process typically in 98-99 percent. Idling system interruptions now consume less than 1% of the CPU usage. Why this processor (i5-3470) spent all of diagnostics from Intel without a blip is a mystery to me.

  Thus, solved! And congratulations for the HP business support!

• In the "CPU usage history" Task Manager, which is the length of the story

  Work Manager "CPU usage history" view which is the length of the story?

  Stephanie

  There is no time for the CPU usage history

  How reach you that conclusion?

  You can change the timespan by changing the speed! You have high, Normal and slow. The displayed time interval will vary depending on the setting. You also Pause setting, which freezes the display.

• The CPU usage goes up to 50-60% right when I start the computer.

  Original title: high CPU usage

  I have a pc with windows 7 64-bit, 4 GB ram, AMD Phenom II x 2 511 processor and a Nvidia Geforce Gtx 260. The CPU usage goes up to 50-60% right when I start the computer. I ran the Task Manager and there is no program using the cpu. It has nothing to do with anny viruses because I scanned the computer with two different programs. We do not have Steam and the EA download manager. What could be the problem?

  "Idle" means "doing nothing."  Windows runs the "System Idle" process when the processor has no useful to perform tasks.

  Look at the status bar at the bottom of the Task Manager and you will see that the CPU usage does NOT include the percentage for the System Idle process.

  What are the processes other than Idle System added up to 50-60%?

  I suggest that you run an online scan using antivirus ESET online--> http://www.eset.com/us/online-scanner/

  and then download, install, update and run the free MalwareBytes AntiMalware--> https://www.malwarebytes.org/ version

  I expect that the MalwareBytes Installer is clean enough, but you should pay attention when installing any software to make sure that you accept all of the pre-selected options to install other bundled applications.