Exchange hard drive on a Satellite A10 521

Similar Questions

• Hard drive replaced on Satellite A10 wouldn t

  Hello

  I have a laptop A10. the hard drive died on me and was contracted. I bought a new hard drive, put it in and turned it back.

  Comes up with the media test failure, check the system cable\insert disk in the drive.

  I do not have any disk system, I just one cd with drivers, I bought the laptop.

  How to make a system disk? any ideas?

  A solution may be to reinstall the drive CORRECTLY and try again.

  In most cases the player was just connected innacurate so that it has no connection and cannot be recognized.
  Or try to connect to another HARD drive in this machine to exclude an error into the connector on the HARD drive.

  But if you're sure that you correctly connected your drive and your test with a HARD drive another managed to 10000%, then send the HARD drive to the dealer where you bought
  and the player, who they send to you.

  Welcome them

• How to install Hotkeys on Satellite A10 521

  Hello

  I had the problem earlier by installing common modules. The installation program does not start but if look at the registry, I have a key named common Modules:
  MEU computador\HKEY_LOCAL_MACHINE\SOFTWARE\TOSHIBA

  I tried to install shortcuts for hotkey-dd-xp-100010002-.zip. I did a right click on Tfnf5Wxp.inf (in directoryhotkey-dd-xp-100010002-en\WinXP)

  I can see now a REG_BINARY named TFnF5 in the TOSHIBA\Common Modules\Run key

  He unfortunately didn't improve the behavior of the hotkeys on my Satellite A10-521. Which may stem from the fact that the windows version is Portuguese?

  I wonder if it might be a good idea to spend the large amount of time to install a XP Home Edition french (as it was in the beginning) instead of a Portuguese XP pro?

  Hello

  For me it s a clear case. According to your message you have an error message common modules. Toshiba common modules are very important and necessary to run other tools of Toshiba.

  I would recommend so reinstall the common modules again!

  The European Toshiba driver page provides the * Module common v6.01.00 * for Win XP.

  Download and install this utility!

  Good luck and best regards

• How to replace the hard drive on the Satellite A100-301?

  How to remove the old hard drive (deceased) and replace it with a new hard drive on the Satellite A100?

  I don't see that there is a harddiskbay that is easily accessible.
  Do I have to take off the whole backcover?

  Hello!

  On the bottom side of the laptop's HARD drive cover is fixed with a screw.
  Remove the screw and cover, then you can exchange the HARD drive.

  Good bye

• Can't see the new hard drive on my Satellite Pro 6100

  I bought a new Toshiba 40 GB hard drive for my Satellite Pro 6100.
  I installed it in the Bay, but it is not recognized in the BIOS, or when I try to reinstall using the recovery disk!
  Bios recognize that there are in the car, even if it is not formatted?
  I'm missing something?

  Thanks in advance

  Neil

  It should work!

  The reader should also be recognized that even he is not formatted...

  3 things you can do:
  At the start you can go in bootmenu and check if the drive is recognized on the 1st controller.
  If this is not the case, check the configuration of the drive (master, slave, CSEL).

  If this is not enough to check the toshiba support website and download the latest version of the bios (probably you already have, check as mentioned above)

  If this does not work your new drive (or worse: your controller) could be faulty. If the reader of the Moose still work on your laptop, check the 40 GB drive to another laptop or PC with adapter ATA connection normal.

• How to partition the hard drive in my satellite M40X-189?

  Please can you advise the team?
  I would like to have the operating system and application programs in a partition and the data I've created in another partition.
  Please can I have advice from the team?
  Has anyone partitioned the hard drive on their satellite M40X-189 and what software did you use to do the partitioning?
  Also, I just defragged my hard drive and the card reader can be seen at: http://www.seniorvalues.org/drive%20map.jpg
  I am curious about the above provision given that free space if 52%, but white space does not reflect this and there is a piece of defragmented files and folders around the middle of the big whitespace at the end of the training I was expecting to be adjacent to the last great defragmented file.
  TIA
  Welshmike

  Hello

  I use partition magic to create and manage new partitions. In my opinion it of the best tool if you want to work with partitions.
  I have 2 partitions on my unit. C for OS and D for the 3rd of data and files. In this case if I recover my unit only the first C partition will be formatted.

  Good bye

• Satellite P100-307 Exchange HARD drive help/advice needed

  Hello

  Thanks for your recent advice on exchanging my 200 GB HDD in to a 500 GB Sized HDD.

  Can you please let me know what I should do with the new HARD disk, so that my P100 can recognize (I format etc.)? I would like the existing to the new mirrored HDD... How does go?

  Sorry to bother you with this beginner Questions...

  RGDS

  Windows will recognize a new hard drive (I assume that you will start the machine from cd) and it has need of formatting it will tell you. You will then need to change the format to FAT32 to NTFS - Windows Help will tell you how to...
  If you are keen on the old disk to the new disk of mirror image, then I think that google some research is in order for example "mirror new portable drive ' there are older versions of disk imaging programs available for free download that will handle NTFS. to search for names include Norton Ghost and Acronis.
  How do you think 'connect' the old and new readers - for example, external usb box on a network, set up two disks on a pc.
  You can copy all the files using the DOS command xcopy with the selector include hidden files/folders.
  Your old drive has a hidden for purposes of recovery partition and you must decide how you manage it.

• Need help to remove the hard drive from a Satellite Pro M10

  Hi, a good will would point me in the right direction. I am trying to remove the HD from a satellite pro M10.
  I discovered the net without success.

  A diagram with being usefully etc.

  kind regards J

  Hello

  I can't give you a diagram or something, but I can give an indication to take a look on the front left side of your machine. On this corner of the left side under the volume control is a small blanket where the HARD drive is in. You need only to unscrew the 2 screws that are accessible when you turn on your machine and and look at the bottom of your machine. Do you know what I mean?

  When you remove these 2 screws, you need to remove the HARD drive by taking some screwdriver flat-blade and paste between the disc cover and HARD case. Then carefully remove the cover of the HARD drive and you can recover the HARD drive with the cover and exchange it.

  Voila, your hard drive West. It s is not difficult at all.

  But if you still have some questions then request.

  Welcome them

• Replacing the hard drive on the satellite 1400-103

  I try to install my old HDD with the following specifications on the satellite 1400-103

  Toshiba
  MK4313MAT
  HDD2141 L ZEO1 T
  DC + 5V 0. 7A
  S/N 99014292T 0T 3 EC. A
  4327 MO (CYL8944, H15, S63)

  But it has not been detected, can it be fixed?
  TIA

  Hi TIA

  I'm a bit confused. Your device comes with 20 GB of HARD drive. Usually, there is problem if someone wants to build in the HARD drive with a much higher capacity. The disc HARDER it who are you talking is just with 4.3 GB. Why you want to use this HARD drive on your device?

  My opinion is that if you want to exchange the HARD drive, you must use the same as one with a higher capacity. This small, you can use as disk external DRIVE for backup of data.

• 160 GB hard drive update for Satellite Pro M70 - 220

  I want to upgrade my satellite Pro M70-220 portable HARD drive the current 60 GB HDD to a 160 GB HARD drive and you drive would be grateful if someone could provide information on the standard/type of HARD drive I should like being looking for and, if possible, specific manufacturer's recommendations and the model number of an appropriate 160 GB of disk HARD.

  Thank you

  AlanCB

  Hello

  The laptop uses a simple 2.5 SATA HDD.
  It's not really important what the speed of the HARD drive is supported, but I recommend to use the 5400 RPM or faster 7200 RPM HARD drive

  Generally all HARD drive size should be compatible because the SATA controller has no limitations.

• HARD drive external for Satellite Pro M10

  Hello!!

  I would buy an external USB HDD to my computer, but I don't know if I can buy anyone. USB 2.0 is not, but I think that only touch the speed of transfer, no?

  BIOS version 1.50

  I find this HARD disk, it'll work?

  http://www.Maxtor.com/portal/site/Maxtor/MenuItem.6adb6b8313633595062e6be791346068/?channelpath=/en_US/products/external%20Storage/Maxtor%20Basics%20Family

  Thnx

  Hello

  Satellite Pro M10 certainly has USB 2.0 ports, firewire, and IrDA interface. The operating system uses a standard USB Windows driver.
  I put t see any problems with the use of the external USB HDD.
  It should work.
  But in my opinion, you should buy an external USB HDD that supports an IrDA interface. It s much faster as a USB connection.

  However, the operating system must be able to handle the 250 GB external HARD drive

• 2nd hard drive for the Satellite Pro A200

  Hello

  I have the Satellite pro A200 (PSAE4E-03401FDU). The LT has an option for a 2nd hard drive, but it is not included a cable.
  Someone knows the reference to the 2nd hard drive cable?
  Thank you!

  Stand by.
  When you remove the HARD drive to the second HDD can see HDD SATA conector?

• Re: No HARD drive recovery on Satellite S995D-S5374 area

  I can't do a recovery disc, it says that there is no HDD Recovery area.

  The situation was like that, I wanted to decrease the size of the C drive. I did it with a program and then windows could not start and went to do so more and more.

  I used a different windows installation disc 8. I used the reset option. And the computer started as if it was just a box, the only difference was that my files were intact and also my account on win8. Although scores are one in trouble.

  Now, it looks like this:

  https://fbcdn-sphotos-a-a.akamaihd.NET/hphotos-AK-AsH4/485244_553699437987988_1572844514_n.jpg
  https://fbcdn-sphotos-g-a.akamaihd.NET/hphotos-AK-AsH3/537768_553699434654655_840557981_n.jpg

  I can not access the half of my hard disk space. There is recovery partition as you can see, but I can not burn a recovery disk...

  I tried to do what he says here (opening the HARD drive recovery process), but it failed. I get the screen where it says
  my pc need to be repaired and nothing was found or can not be found to achieve this.

  Yes, guyes, * please help *. I want my rear disc space and if it is possible to make a recovery disk. As I can access the recovery partition in my computer, can't do a drive recovery here?

  p.s. in disk management, when I right click on the partition "Data", it is said that 'Help' and nothing more.

  p.p.s. I Satellite S995D-S5374. And there was no disk recovery with it when I bought it.

  In recent years, Toshiba doesn't offer recovery discs with new models of laptops with recovery media must be created by the owner of the laptop. It is clearly described in the document s user manuals.

  Recovery media can be created if the laptop has only factory settings. As I see that you have changed the structure of the partitions and that was the big mistake. Of course you can do, but at the first recovery media must be created.

  Please read the last post on http://forums.computers.toshiba-europe.com/forums/thread.jspa?messageID=140985

  Sorry, but now you cannot create recovery media or start HARD recovery disk image installation.
  If you want to have the recovery disk and use it to recovery image installation, you need to order a new drive for https://backupmedia.toshiba.eu/landing.aspx

  If you have any other questions you are welcome.

• How to replace the hard drive internal on Satellite 2450?

  Hello!
  Last month, after a BSOD displayed (I don't have the code of error message, unfortunately) my laptop decided to not work again.
  At the start, he reached the start menu and then displays a black screen... no message, no auto restart... nothing. Just a weird noise coming from the hard drive (like a scratched cd).

  I tried to format the drive, but without success. After choosing the boot source, trying to read the cd and the black screen appears again, with no message. I checked if the Bay of cd is not working properly and it is. (I think)
  So I replaced the HDD in my satellite 2450. A new toshiba ide 2.5 30 GB hard drive. But when I install a new one, the system does not recognize.

  The control panel of the Bios says that "no hard disk" is available, and I can not change this option. (locked)
  With the Windows Xp cd in the drive, the Setup program runs all properly until the 'select drive' format menu, witch says that no hard drive is recognized (with a new drive hard in).

  I don't really know what to do!
  Is something missing in this process?

  Thank you for the patience

  Hello

  The laptop did not recognize a new HARD drive. Which is one reason why Win XP cannot follow the additional installation steps

  I can't say exactly why the HARD drive is not recognized, but the 30 GB IDE should be ok.
  I remember one of my friends had a similar problem with the new HARD drive.
  Some hard drives have a jumper (3.5 HARD drive and 2.5 IDE HARD drive too)
  Maybe you should check if a rider has been set to the right position (slave?).

  Check it otherwise that I recommend to test with another new HARD drive

  In the worst case the disc HARD controller might be faulty, but it would mean replacing a motherboard

• Need info on max size of HARD drive available for Satellite Pro M30-813

  Hello

  The question is mainly to be sent to Toshiba authorized support personnel. The limitation of the maximum size of a HARD drive internal that I could use with my Satellite Pro M30 - 813, what exactly?

  Recently, I bought and installed seagate SATA drive of 160 GB, on which I installed WXP Pro and have been running for a while with no problems. Recently, I've been copying large amounts of data to an external hard drive to my new internal drive, and that the files have been copied, as I noticed have about 50 GB of free space left, I knew windows "delayed write failed" and a failure of massive wall without the possibility to recover the data. The system would no longer boot time and the entire MBR has been damaged. As a result, I lost all the data on my new drive.

  Well, I realize that Toshiba is not responsible for additional hardware that I use with my computer laptop and who is not officially supported by Toshiba, I am sure that as an end-user of a Toshiba product, that I have the right to know a lot information of limiting size of HDD for my model of laptop. So I ask, representing technical support Toshiba to give me an official reply directly to my question.

  Thank you in advance,

  Andrejs

  (You can also contact me private my e-mail address)

  Hi Andrew

  > The question should mainly be addressed to Toshiba authorized support staff
  I think that you are in the wrong place if you are looking for a response from an authorized Toshiba support.
  This is a user to user Toshiba forum! You will here meet passionate and Toshiba laptop owner who share knowledge and trying to solve the problems, but no one of Tosh :(

  I could give my experience with Satellite M30 and HDD upgrade possibilities.
  To my knowledge the M30 Sat supports a 40 GB, 60 and 80 GB HARD drive for sure.
  In my opinion, you can use the 100 GB HARD drive, but more large HARD s drive will not run and works correctly.
  So go to a smaller size of HARD drive and enjoy the laptop!

  I've goggled a bit and found compatible drive HARD and part numbers
  HITACHI GBC000Z810-> 80 GB
  HITACHI GBC00014810-> 80 GB
  TOSHIBA HDD2188B-> 80 GB
  HITACHI G8C0000Z610-> 60 GB
  HITACHI G8BC00013610-> 60 GB
  TOSHIBA HDD2183-> 60 GB
  TOSHIBA HDD2184-> 60 GB

  I hope this might help you a little!

  Best regards