Excite Pro AT10LE-A-108 - reboot and does not light

Hello

I excite Pro 10 model AT10LE-A-108

After you have selected 'Power Off' option Tablet closed OK but then restarts again. Only after several attempts to "Power Off" the Tablet closes down very well.

Any suggestions?

Another question that was yesterday the Tablet would not turn on / restart! I had looked at footie with Bt over the internet for an hour and a half without a problem. I then closed the screen for half an hour and planned to watch another game on BT the Tablet has been totally insensitive. It would not turn back on or restart.

This morning I tried again and it works fine.
Could be another problem related to overheating?

This phenomenon, I've had about three times. Before I used off I 'State aircraft '. It is ok. This may be due to programs that are in the background. No not global warming.
If not started, I hold the Start button time longer, about 10 sec. A plug in the adapter.

Post edited by: ladar

Tags: Toshiba

Similar Questions

  • Excite Pro AT10LE-A-108 - enrollment fails - no network connection

    Hello

    I bought the Tablet Toshiba excited Pro AT10LE-A-108 with SN XD187362S on July 14, 2015 and the product was shipped to me on August 22, 2015.

    After the Android 4.2 update registration of the device fails every time that I reboot the system, after about 1 minute, with the network error message.
    No internet connection available. Connect to internet, and then try again to update your software.

    In addition, I can't use the Toshiba App Manager (App Installer), with the same message.

    My Internet works perfectly, so the problem is elsewhere.

    What should I do?
    Thanks for your help!

    Hey Felix!
    I had the same problem for a long time now, with my Toshiba excited AT10-A. It all started after leaving my Tablet for services (workload issues). Please tell me if and how you resolved this issue. I googled a lot but did not find anything useful. It's really frustrating with the enrollment of device message... #£@ % #! % # !
    See you soon

  • Toshiba excites Pro AT10LE-A-108 the battery

    Hey everybody,

    first of all, I got a Toshiba chance excites AT10LE-A-108 Pro in a common store in Germany.
    Everything was good except the battery won't charge.

    He always showed 0% after plugging the cable it immediaetly turned off and would not turn on without the cable connected.

    Then I got a brand new Toshiba excites Pro AT10LE-A-108.
    I did all the updates, while I was already wondering because the batterystatus switches always between 0% and "full."

    After several hours, I plugged the power cable and the same story the Tablet immeadetly turned off. Yet once, wouldn't turn on without the power cable plugged in:)

    Now its all yours :) It is just bad luck, or is this a common problem?

    What I have to change something in the settings?
    I don't know and I'm not going back again via post :(

    Best regards, Tom

    Hi Tom

    I don t think that it is a case of some incorrect settings.
    To me, it seems that the battery does not charge and from my point of view it s a hardware problem of battery.

    I think you have two options for a fix: you can try to get another new AT10LE-A feature from a dealer or you can contact the maintainer authorized Toshiba in your country for a fix.

    On Toshiba supports support ASP page, you can find the service partner in your country in the region.
    http://www.Toshiba.EU/innovation/generic/ASP_SUPPORT/

  • Change the language using the cover of keyboard to excite Pro AT10LE-A-108

    Hello

    I bought a Toshiba * excite pro AT10LE-A-108 / PDA0EE tablet (Android 4.2) *,.
    It's Toshiba * UK cover of keyboard (English keyboard) / PA5132E-1EKB *.

    I want to change the language by using the keyboard from English into Greek.

    The tablet includes Greek for the supported languages, I can write about it in Greek
    but I can't change it is + keypad +.

    Can someone help me to do?

    I assume that you have not configured the settings for the external keyboard.
    In Android settings: language and entrance you need to find the option to set up the input method

    Downstairs, you will get the option for physical keyboards.
    Him that you have to touch the Bluetooth keyboard. Then you should be able to choose the keyboard configuration. Now select the language of the keyboard.

    In the new window, you will find the advanced option
    Here, you can also choose the layout for external keyboards

  • Excite Pro AT10LE-A-108 - WiFi of abandonment

    I have an excite Pro AT10LE-A-108 and (as well as suspended too frequently) almost every time that I try to use Chrome or Firefox it disconnects from the WiFi signal.

    The router is not the problem, as many other cameras use it without any problem.

    Any suggestions gratefully received.

    K

    Hello

    I recommend you to reset back to factory settings table.
    You could do a hard reset, press and hold the volume button upwards and the Start button / stop.
    Choose the factory (in the middle of the 3 choices) settings using the volume button to navigate.

    Note: your data and settings will be reset too!

  • Excite Pro AT10LE-A-108: after JB 4.3 external BT keyboard upgrade does not work

    Hi all!

    After update 4.2 JB JB 4.3 does not work my bluetooth keyboard.

    Pair ok, Tablet keyboard sees but does not.
    Please, do toshiba repair package or fix problem.

    On the other my android device (phone LG with 4.1.2) working this keyboard ok.

    Sorry, my English is very bad. (Google Translator)

    Thank you.

    [Keyboard Type | http://www.trust.com/en/all-products/18441-executive-folio-stand-with-bluetooth-keyboard-for-ipad]

    Okay, please, I want to downgrade 4.2 JB for this tablet, it's possible?

  • Yoga 2 repetitive pro reboot and does not start

    Turned on my laptop this morning. Worked well. Went to try to use my printer to scan something to my laptop. Printer turned on and came back to my laptop does not. It is just to turn on and off again. The Start button / stop and the keyboard backlight flash just turn off repeatedly.

    Tried searching forums for a solution. Here's what I've tried so far:

    Laptop not connected to the power source

    Battery disconnected

    Disconnected battery CMOS (CR2016)

    Laptop plugged in and still get the same problem of restart

    Ive tried holding down the power button / stop and small button above does not. I also tried holding on to the power supply with battery disconnected and battery connected CMOS. Always the same question: repetitive restart with no boot. Printer has been turned off during the whole process of troubleshooting but worked well with wifes laptop after that mine pooped the bed.

    Anyone got a solution or an idea?

    FYI - took it to a Tech Said motherboard needed replaced. $800 or more.

    Comment to Moderator: Post edited to conform to Community rules.

  • Z30 Z30 blackBerry does not load unless it is rebooted and does not connect to the link

    My Z30 will load only if it is connected to an AC charger and the Z30 is restarted. My Z30 does not connect to my PC via USB. My Z30 running OS 10.3.2.2639. I did a soft reset (how I learned that it charges a restart), and recently completed a wipe of the device security. I bought the phone on October 5, 2014, and now is not working today. My dealer I come to, their store policy is only good for 30 days after purchase and referred me to go look at the manufacturer's warranty. The manufacturer's warranty is for 1 year. I just went this year a few weeks ago. Doubly upset right now!

    Hmmm... except maybe Pinterest, it is difficult to infer any specific causal event of this sequence; I hope that you have already tried to remove this app to see if things have improved. But before more destructive measures, please run the BBVE on the device to see if it provides any useful information:

    Also, that you take a LINK backup in order to recover? For example, if you know your configuration selections, the home screen configuration, add apps, claim, etc., then you can skip the backup and reconfigure simply from scratch. But note that it also requires that use you the best practice method for Contacts and calendar, in that your device does not have the data source 'master' for those, but rather some services online (e.g., Google, Outlook.com, etc.) is the master, and so when you reconfigure these data will simply restore servers, no LINK restore to get the data on your device.

    Let us know.

  • Satellite M50D-A-103 crashed and does not light

    Hello

    I have a Satellite m50d-a-103, which takes place in Ubuntu.

    The operating system crashed recently. I'm not sure if the laptop off really or not. But the screen is dark, and the laptop does not start when you press the power button.

    The only thing that made laptop is that the power light flashes 5 times when the switch is released (no matter how long he was supported before). There is no - screen start or anything, the screen is totally black.

    Located help here suggests I have remove the RAM, but I'm not sure it's a good idea, because I'm not sure that the laptop is off.

    What I've tried is pressed the power button for 20 seconds. I tried also pressing the - or what I guess is the reset button on the back of the laptop.

    The only idea I have now is to hope that the laptop does not work because indeed, there not turn power off and wait until the battery is empty. But I'm afraid that it will take a lot of time.

    So my questions are:

    -How can I fix?
    -How can I find out if the laptop is turned off?
    S ' it is not actually disabled, how do I disable it (it has an internal battery, so removing it will not be easy)?
    - Or is this a hardware problem? And if so, how can I find out component that could be the problem?

    Thanks for any help you can offer!

    [for some reason, I can't edit my original post]

    I couldn't find the manual for the a m50d on toshibas website, but I hurt here: http://www.manualslib.com/products/T...A-3509950.html.

    For the white flashing indicator power, it is said: "Indicates that the computer is in mode 'sleep' and that there is enough available power (mains or battery adapter) to maintain this State."

    So I guess that my initial assumption may be correct. I still don't know not how out of fashion "before" however.

    Any ideas?
    Thank you.

  • My iPad has been slow and has now stopped working completely and does not light

    My iPad is a few years old (I think that the iPad 2, 32GB model A1395 2, no internet,).  For w a few weeks, it has been very slow but has now stopped completely.  I can't turn on even when connected to a power source.  Any ideas?

    Bob

    You can try to reset: hold the home and power buttons at the same time and continue to hold until the Apple appears (up to 30 seconds). If you see the Apple, you should be in business. Once the reset is complete, the Slide to Unlock screen will be displayed.

    If this does not work, you will probably want to pay a visit to the Apple Store, so they can watch. It costs nothing for looking at it. Don't forget to take a go-Genius Bar, so you don't have to wait all day...

    Good luck

    GB

  • No upgrade to 4.3 for excite Pro AT10LE-A-108 and possibilities of rooting

    It seems that everyone has upgraded to 4.3 on this machine, but I get no update system 4.2.1 via settings - system updates - service station.

    Is there another way to get this update?
    Why do I not receive an update option when other people like me in the United Kingdom received them months ago?

    Site Web de Toshiba seems also unable to understand by serial number, so I can't apply on this point for them.

    Finally!
    Is it possible to root or otherwise get around hardware limits allows me to use properly the SD card, I bought for the machine?

    Thank you very much!

    > Is there another way to get this update?

    No, AFAIK, you must upgrade the firmware via the Service Station.
    This tool automatically receives the appropriate software and update the firmware to the last State.

    PS: it is impossible to the root of the device.

  • Mac Pro Intel of dead money and does not start flashes and clicks

    I have an old Silver Mac Pro that I use for a disk hard/servers in the farm. Yesterday, that click on it all of a sudden off the coast. It is on after power up. So now he's doing the following:

    It snaps, white light, he snaps, white light goes back off the coast.

    If I disconnect, reconnect it, and then press the light button turns with a simple click and clicks right back off again.

    I think power but would like advice.

    Thank you

    Hi churdan, did you try the troubleshooting steps in this topic Support of Apple:

    If your Mac will not turn on - Apple Support

    If these suggestions do not solve her, be it to any Apple store for a free evaluation.

  • Satellite Pro L20 - recovery utility hangs and does not complete

    Hello.

    I've been running my L20 Pro Satellite for two years now, quite happy. Unfortunately, in the last 3 months, he began to misbehave. The startup time stretched to 5-10 minutes by that I mean time spent in "black" screen between the initials XP boot logo and the bright blue splash screen Windows. Playing sound/media crackled and stuttered badly through the loudspeaker. So, being reasonable technical, I've read various articles forum tried MSCONFIG tweaks here and there, removed all viruses etc... Nothing helps.

    I began to suspect a HARD drive problem. CHKDSK has not shown any errors. I finally resolved to back up my data and attempt a complete recovery. (Virgin!)

    Unfortunately, this is going to plan. medium 90% up to the end of the NVA Toshiba Recovery Utility 1.0.1.0 I think, started making subtle beeps and stopped on the 'X:\03596002 '. File of the GHS. The Green HARD-drive activity light has renounced his reassuring twinkling. Nothing.

    Any suggestions tips out there? I am currently in the State where he can not start (no NTLDR found).

    Help.

    Thank you.

    HDD on SP L20 interface is - Serial ATA Rev. 1. 0a.

    For the replacement of Satellite Pro L20 HDD or upgrades, you can use follow hard drives:
    With 4200 RPM.
    Fujitsu MHV2060AT
    Fujitsu MHV2080AT
    Fujitsu MHV2100AT
    Toshiba MK6025GAS
    Toshiba MK8025GAS
    Toshiba MK1031GAS

    With 5400 RPM
    Fujitsu MHV2060AH
    Fujitsu MHV2080AH
    Fujitsu MHV2100AH
    Toshiba MK6026GAX
    Toshiba MK8026GAX
    Toshiba MK1032GAX

    So, you can choose one of these hard disks for upgrade. If you now of 60 GB inside buy 100 GB for replacement.

  • Windows 7 Pro PPTP VPN 807 error and does not connect to the remote server, XP machine connect without problems

    I'm just set up my new windows 7 laptop (Dell Precision M4400) running windows 7 Professional and VPN are not working, they're always bombing with error 807.  "The connection between your computer and the VPN server was interrupted."

    I created a PPTP connection in order to connect to my workplace and connecting I continually receive an 807 error.

    To check my internet etc is work that I have connected to the same place through my existing XP laptop computer (DELL precision M4300) which has the same VPN settings.  Everything connects aok.

    I'm also running ESET as my anti-virus and firewall and that you have disabled it to test (normally I have no problem running this and is also running on my XP laptop).  I also confirmed that windows firewall is turned off.

    I connect wireless at home, internet works fine, firewall has not changed at each end (I manage both ends) and such noted works for my machine also running more XP wireless.

    Hello

    Welcome to Microsoft Windows 7 answers Forum!

    Note to resolve this problem, we have a support professionals who are well equipped with the knowledge on Windows 7 issues, do please visit the link provided below.

    http://social.technet.Microsoft.com/forums/en/w7itprovirt/threads

    Hope this information is useful.

    Thank you, and in what concerns:

    Suresh Kumar-Microsoft Support.

    Visit our http://social.answers.microsoft.com/Forums/en-US/answersfeedback/threads/ Microsoft answers feedback Forum and let us know what you think

  • VMWare 4.1 guard reboot and does not install

    I'm trying to install vmware 4.1 on a computer of IBM spare stand alone (HDD 40 GB, 2 GB RAM, Intel 3 GHz processor) that currently holds the Win Server 2003 on it. My intention is to boot from the cd vmware and wipe the hard drive and install ESXi server. I can boot VMware 4.1 CD, loaded records initial vmware of 4-5 and then it restarts, but instead of the installation (and see the bottom half yellow, half black) it goes back to the start menu (blue screen) again where he asks me if I want to install ESXi or booting from the Local hard disk, and same thing again and again. I played with the boot sequence, but didn't make any difference. I wonder if it's a matter of H/W or I do something wrong?

    Thanks for your response

    Welcome to communities

    Make sure that the server is on the compatibility list hardware http://vmware.com/go/hcl

    You must have a 64-BIT processor and preferably with hardware virtualization enabled. 2 GB of RAM would be sufficient to install ESXi but not to run virtual machines (perhaps a xp very small office).

Maybe you are looking for

  • Why AppNib resumes as much memory on Mac?

    For the past few weeks. I've been doing the "system runs out of memory for the application" WARNING when I have only 2 programs open. Google Chrome and iTunes. He stopped the fact for a week. I thought I solved the problem, but today he came creeping

  • Runtime error! R6002 - floating point not loaded support

    I use a Hardrive external Transcend to back up my computer, but when I just tried to use the backup software of Transcend I get a runtime error that the decimal point floating support is not loadedHow can I fix it?

  • First HP: how should I enter non-digital in matrices in

    How do you find the determinant of the [[e ^ 2 x, e ^ x 3], [2nd ^ 2 x, 3 ^ x 3]] or [[Sinx, Cosx] [-Sinx, Cosx]] using the first HP or is there a way to enter a matrix increased with the coefficients to be written in standard form with the constant

  • REG: CASE WHEN IN WHERE WOULD ADOPT

    Hi friends, this is my query SELECT DISTINCT FILE_DIRECTION FROM RA_PROCESS_ID_MAP WHERE FILE_DIRECTION = (CASE WHEN "TAP" = "TAP" and (FILE_DIRECTION = 'A' AND FILE_DIRECTION = 'TI'), THEN WHEN 'NRTRDE"THEN FILE_DIRECTION =" NEITHER "WHEN 'SWITCH' A

  • Confused, I have Mac, Acrobat Pro and want to install it on another computer.

    All I can find is stuff DC and cloud... where to go what to do. ? How is he? All I need is my program on another computer. Thank you, Bill