Excite Pro AT10LE - A - camera Flash LED permanently on all the time
I have a 3 week old AT10LE - honestly and the led on the camera on the back cover is permantly on. As soon as I turn on the unit the led (bright) and stays on all the time. It remains on standby.
I searched all the settings and there is nothing which could indicate as to why it remains on.
Android Version 4.3
3.4.57 - gc710e6f kernel Version
The JSS15Q.001120220.05 build number
Happen now everyday for over a week now.
Anyone have any ideas as to why and how I can fix this behavious
Thanks in advance
Try resetting the Tablet back to factory settings.
Press power and volume button at the same time to access the start menu.
Here, you can use the volume up and down keys to select factory (in the middle of the 3 choices)
Note: this would erase all personal data from your tablet.
OK so I play a game called Emporea on my PC and it uses flash, I've never had a problem then I refreshed firefox as she suggested and it updated to the latest version, I've never had problems with it before on previous versions and now, with this, the lag is so bad that it makes the game almost unplayable. I tried to open it in other browsers such as IE, and it works very well in people. so, the question is somewhere with firefox, I've updated my flash drive and still no change in firefox
One of the changes in Firefox 48-49 title is e10s, separating the process of browser interface process page content. The performance impact of this can vary a lot between the systems, and it would be useful to know if you have this feature enabled. To check this, either:
- button '3-bar' menu > '? ' button > Troubleshooting Information
- (menu bar) Help > troubleshooting information
- type or paste Subject: support in the address bar and press enter
In the first table on the page, find the line of Multiprocess Windows and see if the number on the left side of the fraction is greater than zero. If so, you are using e10s.
If you use e10s:
To determine if this feature is causing this problem, you can turn off as follows:
(1) in a new tab, type or paste Subject: config in the address bar and press enter/return. Click on the button promising to be careful.
(2) in the search above the list box, type or paste the cars and make a pause so that the list is filtered
(3) double-click the preference browser.tabs.remote.autostart.2 to switch the value from true to false
Note: the exact name of this preference may vary, but it will start by Browser.Tabs.Remote.AutoStart
On your next startup of Firefox, it must be run in the traditional way. Any difference?
I have an excite Pro AT10LE-A-108 and (as well as suspended too frequently) almost every time that I try to use Chrome or Firefox it disconnects from the WiFi signal.
The router is not the problem, as many other cameras use it without any problem.
Any suggestions gratefully received.
I recommend you to reset back to factory settings table.
You could do a hard reset, press and hold the volume button upwards and the Start button / stop.
Choose the factory (in the middle of the 3 choices) settings using the volume button to navigate.
Note: your data and settings will be reset too!
I bought a Toshiba * excite pro AT10LE-A-108 / PDA0EE tablet (Android 4.2) *,.
It's Toshiba * UK cover of keyboard (English keyboard) / PA5132E-1EKB *.
I want to change the language by using the keyboard from English into Greek.
The tablet includes Greek for the supported languages, I can write about it in Greek
but I can't change it is + keypad +.
Can someone help me to do?
I assume that you have not configured the settings for the external keyboard.
In Android settings: language and entrance you need to find the option to set up the input method
Downstairs, you will get the option for physical keyboards.
Him that you have to touch the Bluetooth keyboard. Then you should be able to choose the keyboard configuration. Now select the language of the keyboard.
In the new window, you will find the advanced option
Here, you can also choose the layout for external keyboards
I bought the Tablet Toshiba excited Pro AT10LE-A-108 with SN XD187362S on July 14, 2015 and the product was shipped to me on August 22, 2015.
After the Android 4.2 update registration of the device fails every time that I reboot the system, after about 1 minute, with the network error message.
No internet connection available. Connect to internet, and then try again to update your software.
In addition, I can't use the Toshiba App Manager (App Installer), with the same message.
My Internet works perfectly, so the problem is elsewhere.
What should I do?
Thanks for your help!
I had the same problem for a long time now, with my Toshiba excited AT10-A. It all started after leaving my Tablet for services (workload issues). Please tell me if and how you resolved this issue. I googled a lot but did not find anything useful. It's really frustrating with the enrollment of device message... #£@ % #! % # !
See you soon
first of all, I got a Toshiba chance excites AT10LE-A-108 Pro in a common store in Germany.
Everything was good except the battery won't charge.
He always showed 0% after plugging the cable it immediaetly turned off and would not turn on without the cable connected.
Then I got a brand new Toshiba excites Pro AT10LE-A-108.
I did all the updates, while I was already wondering because the batterystatus switches always between 0% and "full."
After several hours, I plugged the power cable and the same story the Tablet immeadetly turned off. Yet once, wouldn't turn on without the power cable plugged in:)
Now its all yours :) It is just bad luck, or is this a common problem?
What I have to change something in the settings?
I don't know and I'm not going back again via post :(
Best regards, Tom
I don t think that it is a case of some incorrect settings.
To me, it seems that the battery does not charge and from my point of view it s a hardware problem of battery.
I think you have two options for a fix: you can try to get another new AT10LE-A feature from a dealer or you can contact the maintainer authorized Toshiba in your country for a fix.
On Toshiba supports support ASP page, you can find the service partner in your country in the region.
Jet Pro 100 MFP M175nw, is the Green standby light supposed to flash all the time standby
When the Green led is flashing, the printer is telling is in stand by mode. It should turn solid when a print job is sent to the printer. Your printer works as expected
I bought a 2nd hand Saturday pro 6000. And now it has started to cut, but it turns on when I press and hold down on the actual case, and when I let him go, he just died... He starts to get on my nervs now I even cleaned up the dust, and he does not know. And there is an orange led flashes all the time everyone knows what is happening or what I can do?
Thank you will be
Already seen on the Pro 6100...
You can read more here: http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=18934
All the time when I'm trying to connect my headset. The Adobe Flash Player plugin has crashed. I'm tired of Firefox. All the movies I have already downloaded lost. I have to restart again. I had to use other browsers such as Opera and Chrome. I'm really tired.
Check and tell if its working.
I have a Satellite Pro P200-15W. After recently running the BIOS update to version 1.9, the fans started running all the time and are extremely loud. Also, he did weird things for Firefox, Thunderbird and NAV.
I would like to "Uninstall" the update of the BIOS if possible. I found [this link: http://askiris.toshiba.com/ToshibaSupportSite/search.do?cmd=displayKC&docType=kc&externalId=1080 89xml & sliceId = & dialogid = 24408215 & stateId = 0% 200% 202 4406262] who treats the restore running CD.
If I run this CD, which will certainly restore the BIOS to the previous version?
Is there a less destructive way (ie: that does not erase the hard drive)?
Post edited by: cannboys
It seems that the picture of the fan was changed and renewed in the new version of BIOS, and so fans run fall.
Why the table fan has been changed?
Well, usually something like this is necessary to improve the reduction of the internal temperature while the CPU and GPU are running with maximum performance.
This helps to prevent the equipment from damage!
> would like to "Uninstall" the update of the BIOS if possible. I found this link that explains the running restore CD. If I run this CD, which will certainly restore the BIOS to the previous version?
> Is there a less destructive way (ie: that does not erase the hard drive)?
Usually, the recovery CD formats the whole HARD drive (partitions too) and installs only the image of Toshiba on the notebooks of HARD drive. The image contains the OS, drivers and additional software and has nothing to do with the BIOS update.
But you can try to recover the laptop to see if you can solve the problems of software!
If you want to reverse the BIOS, you will need to contact the ASP in your country!
Sorry, but all I can suggest.
OK, so this is a strange...
I have a satellite Pro A120. It works with the fan on all the time and sometimes goes on a mayor go slowly (which I think can be reduced to overheating).
Operating system is Ubuntu and I installed the tool of sensors that tell me about the minute the temperature is 100 degrees c and the next one is 16!
I suspect that it is perhaps that the heat sink is full of fluff, but I can't find a guide step by step to dismantle the machine, clean it and put it back together again.
Can anyone help with ideas or resources?
Thank you very much
You do not need to disassemble the unit to clean the fans.
You can use a jet of compressed air which helps to remove dust.
I did it several times and it helped!
last week, I bought a used Toshiba Satellite Pro 4600 PIII, 1 GHz, 512 GB of Ram, WIFI and DVD burner. Great machine so far.
After that I changed the FAT32 file system to NTFS and reinstalled Win2K/SP4 cooler runs all the time.
TaskManager says that "THOT_KEY.exe" uses up 99% of the CPU power. Disabling this service reduces the power of the processor and the cooler was quite, BUT didn't really helped - lots of keys does not work.
I ran a few utilities to disinfect as Kaspersky, NOD32 etc. to ensure that Ia´ve not taken some malware.
Should I try a bios update or change some settings?
Thanks for help
AFAIK the THOT_KEY.exe belongs to the Toshiba Hotkey utility that controls the various key functions.
If you disable this service, you will not be able to use the FN keys more.
I m not 100% sure why this service uses 99% of CPU performance, but perhaps that it s not completely compatible with the W2K service packs. Where did you download this utility? I found it on the page of Toshiba Europe!
In my opinion, you should try to reinstall the system again. This is probably the key!
Hi, I have a problem with my wireless connection fall all the time on my Satellite Pro A300 1EA.
It happened earlier, but I've fiddled about a little with change of drivers and the removal of the connection settings for the registry and it then worked fine for months, until yesterday.
There were several updates for Windows installed yesterday, but none of them have been updated driver for the wireless card, and they don't look like they should cause problems. The fact that the problem happened before makes me think that the updates can be anything to do with it.
I use the * Intel PRO/Wireless 3945/4965/5100/5300 * for Vista 32 - bit version 188.8.131.52.3 drivers from the Toshiba download page.
Other computers on the same access point have no problem, so I think it is specific to this laptop. The connection speed is normally 6 Mbps, but I cannot even check e-mail now without the abandonment of the connection.
Laptop will be thrown against a wall soon if no one can help you.
Thanks in advance.
Edit: I've already made sure power settings are at maximum to the WLAN card, even if on battery, or what power management.
Post edited by: mjbcrawf
Have you tried to use the Windows System Restore feature? After that your WLAN should work fine again.
In addition, I can recommend the latest WLAN driver in the Intel page, it s version 12.4.xxxx. I installed the driver on my Qosmio laptop and don t have any problems with it: [www.intel.com].
If you have any other questions, please let us know!
original title: links in e-mail newsletters don't work
I am using Windows XP Pro SP3. IE8 or FF8 can open all the links that appear in my subscription newsletters. The message I get is:
Firefox can't establish a connection to the server...
Because this happens with both browsers, I suspect that some settings in Windows is the origin of the problem - maybe an update. Everyone knows about this type of behavior? Someone at - it suggestions for me?
This information should be useful.
1. the HOSTS file would have an impact on all browsers. If you do not deliberately use the HOSTS file to block some websites, run the FixIt in this article to reset (clear on) the HOSTS file.
How can I reset the default Hosts file? :
2 key is only, but go to Internet Options > privacy and try a cookie of low value or accept all.
3. from security on the IE command bar > InPrivate filtering settings, disable filtering.
Always safe > Filter SmartScreen > disable the SmartScreen filter.
4 disable third-party security programs (antivirus, antispyware, firewall, etc.) * just long enough * to test some links.
5. similar to the #3, but more in depth...
The clean boot troubleshooting, try.
331769-how to perform a procedure to clean boot (XP & Vista)
Adobe flash CS6 crashes when you use the text or Word of edition tool all the time... Please help!
No one can tell you anything without the proper system or other technical details info. The standard answer with all the problems of text is quite simply, you have a "bad policy" on your system and need to get rid of him.
Maybe you are looking for
I think we're Skype for desktop PC and the other is for Windows 10. Why have two versions instead of one?
I have three sound devices: my soundblaster PCI motherboard built in audio (realtek HD audio), and my graphics Nvidia card (via HDMI). I installed the drivers for the soundblaster and graphics card. I tried allowing both at the time and only one at a
after update of lollipop in my Lenovo a6000 more, none of the applocks do not work. Please give me a solution Note from the admin; subject edited to better reflect the problem
I read this product key Office 2010 license cannot be transferred to another PC. What happens if you have a crash or the motherboard problems hard drive? y at - it a facility to deal with issues like that?
I use this printer for off site events and it can be 2-3 months between uses. When I try to use it it will not print and the nozzles of the cartridges appear to be cloged or parched. If I repalce the cartridges of ink, all works well. Is there a way