Excite Pro overheating, gels, flickering screen etc

Similar Questions

• Dell 11 place 5130 pro 32 bit flickering screen brightness

  Hello

  Device is manufacure renovated like new they say looks like new, software was etc reset factory

  the first system startup

  I do experience flickering BOUNCING hard if I try to adjust the brightness no matter where less than 100%, sometimes the slide has no effect but after 10 to 20 seconds, the screen starts to Flash, sometimes the brightness drops lower and starts to blink... low to Hi power very quickly.

  Adaptive brightness is off everywhere

  Cooling - off Panel

  Energy saving - off

  Even in the Bios when I change the brightness level, it starts to Flash.

  Everything is up-to-date.

  Any suggestions?

  Found was a hardware problem

• Broken screen to excite Pro

  Hello

  I have one hot pro. The front screen is cracked (glass only not LCD). Anyone know if it is possible to have this problem? Or if not where can I buy a replacement scanner to fit me?

  I looked on ebay and amazon but you can't see scanners for the Pure template - would this work on the pro at all.

  It was a gift for my son, any advice would be really appreciated.

  Best regards

  Excite Pro (AT10LE-A) and seems to excite Pure (AT10-A-104) in support of the same size of 10.1 screen but I don't very well if the two supports exactly the same digitizer of m.

  However, I found a www.realviewlcd.com page where that digitizer for AT10LE-A could be ordered.

• Excite Pro AT10LE-A-108 - reboot and does not light

  Hello

  I excite Pro 10 model AT10LE-A-108

  After you have selected 'Power Off' option Tablet closed OK but then restarts again. Only after several attempts to "Power Off" the Tablet closes down very well.

  Any suggestions?

  Another question that was yesterday the Tablet would not turn on / restart! I had looked at footie with Bt over the internet for an hour and a half without a problem. I then closed the screen for half an hour and planned to watch another game on BT the Tablet has been totally insensitive. It would not turn back on or restart.

  This morning I tried again and it works fine.
  Could be another problem related to overheating?

  This phenomenon, I've had about three times. Before I used off I 'State aircraft '. It is ok. This may be due to programs that are in the background. No not global warming.
  If not started, I hold the Start button time longer, about 10 sec. A plug in the adapter.

  Post edited by: ladar

• MacBook pro grey after sleep screen

  I have documented on this problem for some time now on the MacBook screen goes black or rather a visible backlight gray but black screen after being in standby mode. I tried the reset SMC and command + Option + P + R. I am owner of a mid 2014 13 "macbook pro retina.

  Hi Youngnn,

  Welcome to Apple Support communities. It is my understanding you are MacBook Pro shows a gray screen after being in mode 'sleep'. I want to help get this resolved with you.

  You did a great job with the steps taken so far. At this point, I recommend this test in safe mode. Start in safe mode prevents the opening and start-up items to open automatically. Safe mode also allows your Mac to conduct some controls. If the problem does not occur in safe mode, it is possible to a startup item or logon are the cause. Please follow the steps below to start in safe mode:

  1. Start or restart your Mac.
  2. As soon as you hear the startup tone, hold down the SHIFT key.
  3. Release the SHIFT key when you see the logo Apple appears on the screen.

  After the Apple logo appears, this may take longer than usual to reach the login screen or your office. This is because your Mac performs a check of directory of your drive to boot in safe mode.

  To leave safe mode, restart your computer without pressing any keys during startup.

  Try safe mode if your Mac does not end commissioning

  If the problem persists in safe mode try this test to another user. This will help determine whether specific user files, settings and apps cause this problem. Please use the link below to test in an another user account and additional steps:

  How to test a question in another account on your Mac.

  Have a wonderful day!

• Change the language using the cover of keyboard to excite Pro AT10LE-A-108

  Hello

  I bought a Toshiba * excite pro AT10LE-A-108 / PDA0EE tablet (Android 4.2) *,.
  It's Toshiba * UK cover of keyboard (English keyboard) / PA5132E-1EKB *.

  I want to change the language by using the keyboard from English into Greek.

  The tablet includes Greek for the supported languages, I can write about it in Greek
  but I can't change it is + keypad +.

  Can someone help me to do?

  I assume that you have not configured the settings for the external keyboard.
  In Android settings: language and entrance you need to find the option to set up the input method

  Downstairs, you will get the option for physical keyboards.
  Him that you have to touch the Bluetooth keyboard. Then you should be able to choose the keyboard configuration. Now select the language of the keyboard.

  In the new window, you will find the advanced option
  Here, you can also choose the layout for external keyboards

• Excite Pro AT10LE-A-108 - enrollment fails - no network connection

  Hello

  I bought the Tablet Toshiba excited Pro AT10LE-A-108 with SN XD187362S on July 14, 2015 and the product was shipped to me on August 22, 2015.

  After the Android 4.2 update registration of the device fails every time that I reboot the system, after about 1 minute, with the network error message.
  No internet connection available. Connect to internet, and then try again to update your software.

  In addition, I can't use the Toshiba App Manager (App Installer), with the same message.

  My Internet works perfectly, so the problem is elsewhere.

  What should I do?
  Thanks for your help!

  Hey Felix!
  I had the same problem for a long time now, with my Toshiba excited AT10-A. It all started after leaving my Tablet for services (workload issues). Please tell me if and how you resolved this issue. I googled a lot but did not find anything useful. It's really frustrating with the enrollment of device message... #£@ % #! % # !
  See you soon

• Toshiba Excite Pro - Excessive battery drain

  A few weeks, my Toshiba excited Pro started draining battery standby time ago tomorrow. He's going in less than 24 hours from full to empty. On the battery monitor, it says 'Tablet standy' is originally battery drain - isn't an app has become crazy.

  I tried to restart, I tried to use not all the apps that I have installed, I even tried a factory reset. Yet the battery drain. I have a feeling that it could be linked to an update of the infrastructure of the Google Services.

  Anyone who knows the same problem? I guess we need a firmware update to solve, and I'm not optimistic to see everyone.

  So should I return it? I'm put off by the clause of the Toshiba warranty that says they're going to charge me 60 pounds if the Tablet 'requires only an update of the firmware'. I think it is exactly what it takes, but first Toshiba would need produce the new firmware. I guess I should go through the retailer then?

  Up to now nobody has reported such similar behaviour of the Tablet and so I think that the theory about the Google service infrastructure could not be completely correct. But that's just an assumption...

  AnywayI read some reviews on the battery drain problem in mode 'sleep' with other android tablets.
  Someone wrote that partition the cache wiping system can help if the appliance starts to behave strangely or slowly, or in the case where the battery would start to shift very quickly.
  System cache partition is a system such as the log files data storage area, frequently accessed data app which has been temporarily put in cache, and downloaded apk Installer files from the game of Google.

  In order to clear the cache partition, you need to access the Recovery Menu (button / stop + volume up).

  However, there is a proposed solution that has been suggested by other users of android. Not sure if this might help you.

• Update of Toshiba excited Pro ATLE-A-108 4.4

  Hello everyone,

  I would like to know if the Tablet 'excited pro"- ATLE-A-108 will be updated to android 4.4.

  Thank you.

  Jonathan

  I think you can get this information directly from Toshiba only.
  It is just a community of users and unfortunately information about new updates Android has not been published on the pages of Toshiba.

  But let's hope that this update would be available in the future.

• Toshiba excites Pro AT10LE-A-108 the battery

  Hey everybody,

  first of all, I got a Toshiba chance excites AT10LE-A-108 Pro in a common store in Germany.
  Everything was good except the battery won't charge.

  He always showed 0% after plugging the cable it immediaetly turned off and would not turn on without the cable connected.

  Then I got a brand new Toshiba excites Pro AT10LE-A-108.
  I did all the updates, while I was already wondering because the batterystatus switches always between 0% and "full."

  After several hours, I plugged the power cable and the same story the Tablet immeadetly turned off. Yet once, wouldn't turn on without the power cable plugged in:)

  Now its all yours :) It is just bad luck, or is this a common problem?

  What I have to change something in the settings?
  I don't know and I'm not going back again via post :(

  Best regards, Tom

  Hi Tom

  I don t think that it is a case of some incorrect settings.
  To me, it seems that the battery does not charge and from my point of view it s a hardware problem of battery.

  I think you have two options for a fix: you can try to get another new AT10LE-A feature from a dealer or you can contact the maintainer authorized Toshiba in your country for a fix.

  On Toshiba supports support ASP page, you can find the service partner in your country in the region.
  http://www.Toshiba.EU/innovation/generic/ASP_SUPPORT/

• Excite Pro AT10LE-A-108 - WiFi of abandonment

  I have an excite Pro AT10LE-A-108 and (as well as suspended too frequently) almost every time that I try to use Chrome or Firefox it disconnects from the WiFi signal.

  The router is not the problem, as many other cameras use it without any problem.

  Any suggestions gratefully received.

  K

  Hello

  I recommend you to reset back to factory settings table.
  You could do a hard reset, press and hold the volume button upwards and the Start button / stop.
  Choose the factory (in the middle of the 3 choices) settings using the volume button to navigate.

  Note: your data and settings will be reset too!

• Toshiba Excite Pro - WIFI dropouts very often

  Hello

  I recently acquired a toshiba excites pro 16 GB tablet.
  The problem is that I * disconnections wifi * very often, so that all my other devices still connected at the same time.

  When falls the wifi, it is very difficult to reconnect even if I restart several times the Tablet (perhaps after the fifth, but it remains not connected for a long time).

  If I stop the Tablet for a while then I connect immediately - until it disconnects.

  I already get into recovery and restored the tablet with no result.

  Any suggestions?

  Try this:

  Go to advanced wireless settings and check if + WMM + is activated.
  This option must be checked to have a stable connection between the Tablet and route

• Excite PRO 3G connection does not work after last update Android v4.3

  Hello

  I live in Italy and last Sunday (26 January) my excited PRO Tablet (model AT10LE - A - 10 H) received version Android 4.3.201121220.35.

  After restart my wifi works fine, all other app very well work, but my 3g connection does not work, mobile bar is empty and it says "no service".

  My sim card is ok. I used this sim card before the system update and I don't have a problem with Android 4.2.2.

  Please help me.
  Thank you

  > After reboot my wifi works fine, all other app very well work, but my 3g connection does not work, mobile bar is empty and it says "no service".

  Go to mobile network settings and search again for the 3G network.
  I had a similar problem with my Android Smartphone and my o2 provider
  I started to search for new, so I chose the O2 again and then I could solve the problem.

  In the case where this does not work for you, recommend you to reset the default Tablet (factory settings)

• Excite Pro does not recognize the of 1 TB external HARD drive

  Hi can someone please help.

  I have a 1 TB hard drive and when I plug in my excite pro tablet, the table can not read the disc.

  The hard drive is formatted in Fat32 and the blue light flashes when the drive is connected.

  I know the drive works ok, so I have another cheapo tablet which has no problem to read the HHD

  Android on this Tablet does not support drives of more than 32 gigabytes, that is why I join my drive using a usb wifi router. (For example, Huawei HG622)

• MacBook Pro opens to the screen and progress bar gray, freezes when the progress bar ends. Have tried several options to get into safe mode and suggested strikes, but can't. Any suggestions?

  MacBook Pro opens to the screen and progress bar gray, freezes when the progress bar ends. Have tried several options to get into safe mode and suggested strikes, but can't. Any suggestions?

  Here are some links from Apple which may help

  How to choose a boot on your Mac - Apple Support drive

  On the screens, you see when you start your Mac - Apple Support