Exclamation point to the Wifi symbol to good internet c

After update to the lollipop and the next update of the google services, it is an exclamation on the WiFi symbol, even when I have a good internet connection.

I tried to forget the connection and set up again but it does not help. At home, I rebooted my router, but it doesn't help either.

The problem is the same to all WiFi connections, I've used so far.

I have a search on this forum, but couldn't find a solution. As mentioned previously, I have a good internet connection, google all the services work.

Why do I get the exclamation point?
How can I get rid of him?

You have a dual sim? If so, try to change the order of sim, put sim into the sim slot 1 2 and sim 2 into the sim card slot 1.

See if the exclamation point disappears in the Wifi...

Tags: Motorola Phones

Similar Questions

  • The WiFi symbol indicates "!" even when properly connected

    Suddenly the WiFi symbol in the notification panel started showing "!" whenever connected to WiFi. I know what means the exclamation mark with the WiFi symbol. But in my case, even when I am connected to WiFi and can download apps and surfing, the WiFi symbol always an exclamation point. I tried a hard reset. It worked fine which is the WiFi symbol was back to normal as before until I restarted the device. After the first reboot I have faced the same problem, i.e. the exclamation point with the WiFi symbol even if it is properly connected. Tried clearing cache and also entered the mode without failure, but nothing helped. Is there a solution to this?

    PS - Did not change anything. The bootloader is locked.

    Have you used mobile data on SIM2 before connecting the WiFi?

    I have the same problem after the lollipop. Figured out that exclamation point appears them on WiFi sign only after I used mobile data on SIM2. When I use mobile data on SIM1 and then turn on WiFi, everything is OK (the WiFi sign is without '! ")

    So how you can solve this problem:

    1 turn off WiFi

    2. activate the mobile data on SIM1. Wait for that 'H' or 'E' sign indicating that mobile data sucessfully working. Put access point sometimes lost: mobile networks goto-> Access point names and be sure that this radio button is active.

    3. turn on the WiFi. Now, there is no exclamation point!

    And if you use mobile data on a single SIM card. just swap the SIM card in the first slot.

    Surely this is a bug. Big bug in Lollipop for Dual SIM MOTORCYCLE G. Motorola's remedy.

  • Network of the island so no internet access remove a yellow exclamation point in the network icon in the taskbar.

    Hi, I have 10 windows 7 Enterprise workstations connected to a Windows 2008 domain and there is no internet connectivity (this is normal) but each workstation network icon displays an exclamation point yellow because she had not any internet connection. Isn't there anyway other than hide the icon which I don't want to get the yellow exclamation point to appear.

    Thanks Simon.

    I finally found the answer. If you are running Windows server 2008 R2 edition, then you can find this policy in the strategy of Group Editor and it will be effective for your Windows 7 machines. If this is not the case, as I am on Windows server 2008 standard and then, is not an option within the Server Group Policy Editor must therefore be as a change in local policy on the workstations.

    It is found on the local computer by running gpedit.msc and looking: -.

    Local computer policy,

    Administrative templates,

    Network,

    Network connections,

    Does not display the network icon "local access only".

    Select this option enabled.

    Closing of session and immediately and this will make the yellow exclamation point icon disapear.

  • Many of my photos in Lightroom have exclamation points in the upper right corner of the file.  I can't export, modify, or doing something with those photos.  They system (Lightroom) tells me that the files not found

    Many of my photos in Lightroom have exclamation points in the upper right corner of the file.  I can't export, modify, or doing something with those photos.  They system (Lightroom) tells me that the files not found

    Hi Jenny June,.

    Please take a look at the following article, it should be useful: https://helpx.adobe.com/lightroom/help/locate-missing-photos.html

    Kind regards

    Tanuj

  • iTunes can't locate my music. When I try to play a song one get an exclamation point and the message "the song could not be used because the original file cannot be found. You want to locate?

    I don't know if I am posting this in the right place. If she must be somewhere else please let me know.

    When I try to play a song I get an exclamation point next to the song and a pop up that says: "the song could not be used because the original file cannot be found. You want to locate? »

    I use Windows 10 and iTunes version 12.3.1.

    It's the path statement where the music is currently located on my hard drive:

    If I click on a single song from within File Explorer, it opens iTunes and the song plays without problem.

    To try to solve this problem, I went in 'Advanced' in 'Préférences' and changed the iTunes media folder location to match the location of the files on my disk hard as you can see below.

    Unfortunately, it did not work either. iTunes is always gives me the same message that it cannot locate the original files. I REALLY hope someone can help me finally tried for weeks to solve this problem.

    Thank you!

    Now iCloud is down, if something happens on the end of apples.

  • RELOADED VISTA operating system CD - Mgr device has exclamation point in the SM Bus controller

    Pavilion a6400f with VISTA 32-bit Edition home premium. System would not start after HP splash page and all the diagnosis seems to imply things were OK. Inserted the VISTA CD and entered the product code and reload the Windows partition. Existing files seemed even after reloading VISTA, had to download RTL81xx REA:LTEK driver from HP support and internet and all site seems to work fine - charged 102 patches Windows system, including the chipset g31/33.  Everything seems to work EXCEPT having an exclamation mark in the device to OTHER DEVICES Manager - CONTROLLER of BUS SM. Right click on properties says drivers are missing.  I guess I'm missing chipset but can't seem to find the one that.  Troubleshooting Guide of HP who took me to the page of INTEL for chipset, but do not want to download a chipset with the warning below he followed.  A ran dxdiag in Start menu and and involves the g33/g31 chipset but see the drivers installed. Appreciate any thoughts...

    Interesting - no luck with this chip set no more BUT took the look to my file system on the hard drive and found that it still contained the windows.old directory of my reloading VISTA the other morning.  I thought I had done a full charge but does not have the format of the disc so appartently VISTA saved my old windows directory in windows.old.  In this folder is a file INF folder - I have seen nothing obvious in the folder, but on the installation of the SM BUS failed, one of the questions was point to a search folder.  I mentioned it in the windows.old.inf folder and the installation program found a software to install. Installer complained of not digitally signed data, but I said to continue and the SM Bus has been installed.  He removed the exclamation of OTHER DEVICES and placed SM BUS SYSTEM with Intel ICH9Family DEVICES with address of 2930. If I look at the properties of the SM BUS under details it shows the DRIVER VERSION 8.3.0.1008 with the date 2007-01-13, but under the driver Details button, it says no driver required.  I'm not sure what exactly it says but everything seems to work now, and I suppose to be sure I should save the file in case something like this happens again well probably just move to Windows 7.  Thank you very much for all your help and ideas - carried you me on my problem.

  • I keep seeing red exclamation points on the files, of which most was not important, so I deleted,

    in computer science, I found a bunch of files that he had red exclamation points on them, I deleted a bunch that have been for old installations. now, I tried to move a picture to the picture library and when the new version is time everyone had red exclamation points mean these

    http://www.bleepingcomputer.com/forums/topic178785.html

    Read the info above re Mozy backup software and see if it applies to you.

    See you soon.

    Mick Murphy - Microsoft partner

  • Query results - failed with the exclamation point on the icon

    Hello

    When I run a select query, I now get an exclamation on the green arrow icon in the results of the query.  I was able to run this query before and no changes have been made.

    In the results of the query if window I click the icon "recharge" (two blue arrows) the results of flash to the top output and then turn off.

    Version 3.0.02 / / Build HAND - 02.37 / / Java Platform 1.6.0_11

    As much as I know I did not any configuration or connection of database changes.  This problem appears on all DB and SQL connections all trying to launch.


    This seems to be the error:

    java.lang.NullPointerException

    at oracle.dbtools.worksheet.sqlhistory.db.HistoryDB2.getRowFor(HistoryDB2.java:43)

    at oracle.dbtools.worksheet.sqlhistory.SqlEditorHistory.saveSql(SqlEditorHistory.java:85)

    to oracle.dbtools.worksheet.StatementRunnerResultsPanel$ 4.taskFinished(StatementRunnerResultsPanel.java:287)

    at oracle.dbtools.raptor.backgroundTask.RaptorTaskAdapter.stateChanged(RaptorTaskAdapter.java:95)

    at oracle.dbtools.raptor.backgroundTask.RaptorTaskDescriptor.notifyListener(RaptorTaskDescriptor.java:143)

    at oracle.dbtools.raptor.backgroundTask.RaptorTaskDescriptor.setStatus(RaptorTaskDescriptor.java:370)

    at oracle.dbtools.raptor.backgroundTask.RaptorTaskDescriptor.setStatus(RaptorTaskDescriptor.java:352)

    at oracle.dbtools.raptor.backgroundTask.RaptorTask.setStatus(RaptorTask.java:257)

    to oracle.dbtools.raptor.backgroundTask.RaptorTaskManager$ RaptorFutureTask.done (RaptorTaskManager.java:479)

    to java.util.concurrent.FutureTask$ Sync.innerSet (FutureTask.java:251)

    to java.util.concurrent.FutureTask$ Sync.innerRun (FutureTask.java:303)

    at java.util.concurrent.FutureTask.run(FutureTask.java:138)

    to oracle.dbtools.raptor.backgroundTask.RaptorTaskManager$ RaptorFutureTask.run (RaptorTaskManager.java:500)

    to java.util.concurrent.Executors$ RunnableAdapter.call (Executors.java:441)

    to java.util.concurrent.FutureTask$ Sync.innerRun (FutureTask.java:303)

    at java.util.concurrent.FutureTask.run(FutureTask.java:138)

    to java.util.concurrent.ThreadPoolExecutor$ Worker.runTask (ThreadPoolExecutor.java:886)

    to java.util.concurrent.ThreadPoolExecutor$ Worker.run (ThreadPoolExecutor.java:908)

    at java.lang.Thread.run(Thread.java:619)

    Closing/reopening Developer SQL does not help.  I restarted my PC and the results appear, but then the same error appears again.

    Any help would be appreciated.  Thank you.

    Hi Jon_Male,

    A few points:

    1. your release is somewhat obsolete, more there seems to be an early release of the adoptive parent rather than the version 3.0 production (3.0.04.34).

    2. the old post of next forum has the same behavior after an OutOfMemory error: exclamation on the tab out script

    Kind regards
    Gary

    SQL development team

  • I get an error of writeback failed after receiving updates or get new files yellow exclamation point in the icon 'son to the right of the screen.

    I must also click DELETE to restart the computer to retrieve the screen and the screen will show also 8-10 writing failure before going to the browser

    What update, the exclamation yellow on which icon, any error message.

    error message in Event Viewer can help.
    http://help.artaro.EU/index.php/Windows-XP/essential-administration-XP/Event-Viewer-XP.html

  • Yellow triangle with exclamation point after the transition of FCPX in motion

    Not finding what I'm doing wrong. Once I edited the 'Circle' of FCPX transition in motion, then saving them in the blue circle, but when I use it, I get this error of brand triangle yellow/exclation and the transition does not. Any ideas?

    Overdraft.

    Necessary FCPX updated to the latest version. That's all.

  • Downloaded IOS 9.3.1... big mistake!   Now my 4S apple lights.  Only thing shows when it is turned on, the ITunes symbol and the image of the power supply cable with the arrow pointing towards the ITunes symbol. Tried a reset of the 5 - 6 times with the s

    Sorry it is in summary...

    You are in recovery mode. You need to restore your phone via iTunes on your computer. Then you must reload your latest backup.

  • Satellite P300 connected to the WiFi router, but no internet connection

    Help!

    I have a Satellite P300 installed with Windows Live Onecare... and a netgear Rangemax wireless router
    I have no idea as to overcome this problem... I just moved house and it worked just dandy in the old place

    Any suggestions would be greatly appreciated.

    Thank you

    Hello

    If everything worked correctly in your old House, then I guess there is no problem with the laptop but the router is simply not configured property or there is a problem with your ISP (internet service provider).

    Maybe you should get in contact with the ISP and need to check if the connection is ready and available!

    Welcome them

  • Windows 7 or 8 shows the wireless client connected to the access point, but the wireless icon displays "no internet connection".

    I saw the same problem with a different providers wireless solution. When I've sniffed the air with OmniPeek and the network that the ap was conducting with WireShark, I see the arp for the gateway request going to the router, the router gateway response is sent to the suspect machine in the air, the acknowledgement of PC than the package but never fills the arp cache. I watched two arp responses in a vs work for lack of scenario, the two packages are the same.

    The only way I could solve it was to disable IP Helper (not start too) services, reboot the machine. I see 3 to 4 drops per day, but since the deactivation of this Service the machines with that I tested have not seen the question once again.

    IP Helper:
    Provides tunnel connectivity using technologies of transition IPv6 (6to4, ISATAP, Teredo, and Port Proxy) and IP-HTTPS. If this service is stopped, the computer will not have the benefits of improved connectivity offered by these technologies.

    Machines tested and fixed:

    Lenovo E540
    Lenovo W540
    Acer Aspire One
    Dell Latitude E6420

    Ip assistance service has been changed about 40 laptops, a dozen of which would fail in about an hour. So far, 0 out of the 40 saw the question since this change and reboot (reset is the key after disable it) laptops. It's been about 5 days.

    Any reason why disable this Service solves the problem? With it I can replicate the problem pretty quickly on a few different types of machines so it seems not to be driver or provider specific wireless network card. I checked through the Event Viewer logs, but nothing seems to be triggered during the show. Using the Troubleshooter or disconnect the wireless service will fix the problem for a short period only.

    Hello

    The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums.
     
    TechNet Forum
    http://social.technet.Microsoft.com/forums/Windows/en-us/home?filter=AllTypes&sort=lastpostdesc&brandIgnore=true

    Hope this information is useful.

  • Satellite Pro A110 - in BIOS exclamation Point in front of the HARD drive

    Satellite A110 Pro PSAB1C-GM80XE

    Question is this. SATA CONTROLLER TOAST the laptop?

    Story.

    It seems as if the laptop hard drive has failed.
    Prior to the laptop, it would get BSOD.
    It would, however, go back to windows XP.

    After that, sometimes it wouldn't restart, he would try to boot from lan as if there is no hard drives.
    I check the bios.

    There is a! in front of the model of the drive. I can't change it, reset default does not change.
    No update of the bios was already made.
    Page drivers laptop says I have to install the update to the bios from windows xp... I can't do it of course.

    I bought a new hard drive for the laptop. WD Scorpio Blue (pretty standard) 160Gig

    The laptop recognize model to drive hard in the bios, but once again with the exclamation point in front of the name of the template.

    BIOS can see, but nothing else. No windows CD is able to watch the HD.

    Once again, it is the sata controller or can someone point me to an update of the bios I can do with a USB key.
    Should I just throw the laptop in the trash? I expect to give it a new life with a new hard drive and own bones.

    Hello

    What is the BSOD STOP Code?

    If 0x0000007B, it means that Windows cannot find a SATA driver for the SATA controller. To solve this BSOD, set the SATA Mode in the BIOS in "COMPATIBILITY" mode, or use a USB floppy with the SATA driver on this subject during the installation of Windows. Press F6 when you are prompted to install a 3rd party storage driver.

    Or otherwise, to use the original Toshiba Recovery disk to install Windows.

    I do not mean the exclamation point in the BIOS that the HARD drive is faulty, it means that the HARD drive has the highest priority boot on my laptop.

  • exclamation point for songs matching when the file is deleted

    It doesn't stop of getting more bizarre.  When I delete the songs to get the version of iTunes, an exclamation point is carried by the song instead of the cloud with the arrow. I double-click on the song and he said: "the 'X' song could not be used because the original file cannot be found. You want to locate? "Then I hit Cancel it. He then removed the exclamation point, puts the cloud with the arrow through it, as usual, ready for me to click on it and download. In addition, he can now play the song. I have thousands of them in my collection. What I have to double-click on each song and click Cancel so that it it is labeled correctly for iTunes to download game. Yes, I checked library iCloud.

    It is the latest version of iTunes 12.3.2.35.  Any suggestions on how I can select all the pieces with this problem and that iTunes is to define each song correctly?

    Hello

    Where are located the original songs? What happens when you play these songs on your computer?

    Jim

Maybe you are looking for