Exclude the internal Contacts of Metrics
I have a number of internal contacts that are included in the countryside to be informed of the communications that are sent. What are the best practices to exclude these contacts to the extent of the campaign? I don't want Email opens, clicks, form mail, etc. to swell because of these internal contacts. All the internal contacts of those email addresses would have only 1 or 2 areas so if there's a way to exclude based on the e-mail domain that would work for me. Or is it possible to use a contact in these contacts to exclude field report?
In Eloqua, you can filter all the Analytics of specific IP addresses by accessing the settings > Setup > monitoring > IP filters > visitors to be filtered from analytical.
You can then set the IP addresses to exclude from your Insight reporting so that your internal numbers not to distort the data.
Tags: Marketers
Similar Questions
-
How to remove the internal contacts of Web site reports and remittances form?
Hello
There used to be an article about it previously under the support of old, but I can't find them more
I would therefore delete the activities of people internally at my company of all Web site traffic reports and also to form presentations as it makes it difficult to work on the actual performance.
For the test, we can use our gmail accounts personal, which will further enhance the figuration, but should be much less that is currently happening.
Has anyone done this before?
Thank you
Richard
Actually found something I could test for web traffic...
Eloqua 9 is in the 'Setup' > 'Management' > then under the "System Management" tab > in the left menu, expand "IP filters" and select "visitors to be filtered from analytical."
-
How to remove messages in Exchange 2010 by dates. in a group and exclude the Contacts, record retention and calendar.
I'm deleting emails from users in a group called MX_Purge file. I need to delete the emails date xx/xx/xxxx to xx/xx/xxxx.
I also need to exclude the excluded the following records 'calendars' folders 'Contacts' and 'Retention '.
The server people hang around more in the TechNet forums, if you ask, you will get a much better response:
http://social.technet.Microsoft.com/forums/en-us/Exchange2010/threads
-
Cannot update or download new applications. I have 465 MB of internal storage space. Have you tried the "solution" offered on another thread here re: Uninstalling playstore updated and that did not work.
Get very frustrated with the z3 compact because it seems obvious that even with the ability to partially move apps to SD card it would never be enough space for this works as an AAA flagship phone. Sony had to know how many Android apps are bolted on taking the lion share of the internal memory. Why make a phone with this level of the plug and then skimp on some ugly cheap storage?
Yes, you can remove the card and backup your contacts and you can perform a repair using PC Companionsoftware. The process will erase all internal memory. You might need to charge your device for about 1 to 2 hours until the device has so at least 80% battery.
Make sure that the device is not connected to the computer or laptop and turned off (sometimes you have to press the power button / stop and volume until what the machine vibrates 3 times or on some devices, it must push the small button near the tray on the back of the camera or SIM).
Open PC companion-> support area-> update phone software / Tablet-> repair my phone/Tablet blue highlighted. Follow the steps, do not plug your phone until you are prompted to press volume down while plugging in the USB cable. If PC companion does not start the repair process, you may need to run Windows 7 compatibility mode (in some cases XP).
-
How can I activate the internal Microphone?
I have a Dell Intel Core with windows 7. I turned off the internal mic once and now I don't remember how to turn it back on. I want Skype to my 6 year old granddaughter, but can't because it won't save my voice. THEN; How do you turn on microphone internal? Thank you in advance for helping out with this.
Phyllis
You should consult the documentation for your computer's system or contact Dell. It is not a Windows problem.
-
How to exclude the field of persistent object
Hello
Is it possible to substitute the PersistanceStore method to persist objects?
I have a complex data structure I need to store. One of the internal classes contain no persistent field. When I'm storing the data I don't no need to store this field, but the compiler triggers error.
... Widget: error! : class... Persistable marked widget by interface:... Persistable is not persistent: _field field: class... Field does not implement net.rim.vm.Persistable
Is the way to override the implementation of this class persitant and exclude the problematic areas?
Thanks for the reply.
I did something similar, I created a class of data for persistence and a class of execution with additional fields.
It's not very practical, these classes are deep into a tree of complex data, but I guess that's how it should work with BlackBerry.
-
VPN IS CONNECTED BUT CANNOT ACCESS THE INTERNAL NETWORK
I tried to set up a simple customer vpn using this document
VPN IS CONNECTED BUT CANNOT ACCESS THE INTERNAL NETWORK BEHIND "RA"...
6.3 (5) PIX version
interface ethernet0 car
Auto interface ethernet1
ethernet0 nameif outside security0
nameif ethernet1 inside the security100
activate the encrypted password of VmHKIhnF4Gs5AWk3
VmHKIhnF4Gs5AWk3 encrypted passwd
hostname VOIPLABPIX
domain voicelab.com
fixup protocol dns-length maximum 512
fixup protocol ftp 21
fixup protocol h323 h225 1720
fixup protocol h323 ras 1718-1719
fixup protocol http 80
fixup protocol they 389
fixup protocol rsh 514
fixup protocol rtsp 554
fixup protocol sip 5060
fixup protocol sip udp 5060
fixup protocol 2000 skinny
fixup protocol smtp 25
fixup protocol sqlnet 1521
fixup protocol tftp 69
names of
access-list 101 permit ip 172.10.2.0 255.255.255.0 172.10.3.0 255.255.255.0
access-list 101 permit ip 172.10.1.0 255.255.255.0 172.10.3.0 255.255.255.0
access-list 102 permit ip 172.10.2.0 255.255.255.0 172.10.3.0 255.255.255.0
access-list 102 permit ip 172.10.1.0 255.255.255.0 172.10.3.0 255.255.255.0
pager lines 24
Outside 1500 MTU
Within 1500 MTU
IP address outside 208.x.x.11 255.255.255.0
IP address inside 172.10.2.2 255.255.255.0
alarm action IP verification of information
alarm action attack IP audit
IP local pool voicelabpool 172.10.3.100 - 172.10.3.254
history of PDM activate
ARP timeout 14400
NAT (inside) - 0 102 access list
Route outside 0.0.0.0 0.0.0.0 208.x.x.11 1
Route inside 172.10.1.0 255.255.255.0 172.10.2.1 1
Timeout xlate 03:00
Timeout conn 01:00 half-closed 0:10:00 udp 0: CPP 02:00 0:10:00 01:00 h225
H323 timeout 0:05:00 mgcp 0: sip from 05:00 0:30:00 sip_media 0:02:00
Sip timeout - disconnect 0:02:00 prompt Protocol sip-0: 03:00
Timeout, uauth 0:05:00 absolute
GANYMEDE + Protocol Ganymede + AAA-server
AAA-server GANYMEDE + 3 max-failed-attempts
AAA-server GANYMEDE + deadtime 10
RADIUS Protocol RADIUS AAA server
AAA-server RADIUS 3 max-failed-attempts
AAA-RADIUS deadtime 10 Server
AAA-server local LOCAL Protocol
Enable http server
http 172.0.0.0 255.0.0.0 inside
http 0.0.0.0 0.0.0.0 inside
No snmp server location
No snmp Server contact
SNMP-Server Community public
No trap to activate snmp Server
enable floodguard
Permitted connection ipsec sysopt
Crypto ipsec transform-set esp-aes-256 trmset1, esp-sha-hmac
Crypto-map dynamic map2 10 set transform-set trmset1
map map1 10 ipsec-isakmp crypto dynamic map2
client authentication card crypto LOCAL map1
map1 outside crypto map interface
ISAKMP allows outside
ISAKMP identity address
part of pre authentication ISAKMP policy 10
ISAKMP policy 10 encryption aes-256
ISAKMP policy 10 sha hash
10 2 ISAKMP policy group
ISAKMP life duration strategy 10 86400
vpngroup address voicelabpool pool cuclab
vpngroup dns 204.x.x.10 Server cuclab
vpngroup cuclab by default-field voicelab.com
vpngroup split tunnel 101 cuclab
vpngroup idle 1800 cuclab-time
vpngroup password cuclab *.
Telnet timeout 5
SSH 208.x.x.11 255.255.255.255 outside
SSH 0.0.0.0 0.0.0.0 outdoors
SSH 172.10.1.2 255.255.255.255 inside
SSH timeout 60
Console timeout 0
username labadmin jNEF0yoDIDCsaoVQ encrypted password privilege 2
Terminal width 80
Cryptochecksum:b03a349e1ac9e6022432523bbb54504b
: end
Try to turn on NAT - T
PIX (config) #isakmp nat-traversal 20
http://www.Cisco.com/en/us/products/ps6120/products_tech_note09186a00807e0aca.shtml#Solution1
HTH
-
The internal architecture IDS 4.1 document will be available? where? When?
Hello
I see the old architecture internal ID of the Web site of cisco, one with the Director of module.
Wondering when the internal architecture 4.1 is available?
If this is not the case, whenever soon, how to make the connection between that I see with version 4.1?
The documentation team will work on a new architecture for 4.1 document, but it is not yet available. I don't know how long it will take.
Here is a brief comparison of the differences in architecture between 3.1 and 4.0/4.1.
3.1 Packetd-> SensorApp 4.0
3.1 management-> NetworkAccessController 4.0
3.1 IDM-> IDM 4.0
3.1 VEI-> VEI 4.0
3.1 Web server-> 4.0 Web server
Other 3.1 process do not necessarily have a direct analogy to the process in 4.0/4.1.
Other processes 4.0/4.1:
mainApp - responsible of the upgrade and the configuration of the OS base IP, netmask, etc... ; also responsible for triggering of other processes
authenticationApp - responsible for the authentication of user login
eventServer - is a web application responsible for sending events to other boxes as VEI. It is often comparable to the post office in 3.1, but is limited to sending only in contrast to the post office which also manages the configuration changes. In 3.1 alarms were stored in log files and IP logs were stored as single files. 4.0/4.1 there is no more log files. Instead, there is a similar to a database circular storage which is called the eventStore and storage of similar type for newspapers of the intellectual property.
transactionServer - a Web based application; responsible for control operations that are used to changes of ocnfiguration and other orders of Government (such as shunHost)
Major architectural differences.
Communication between the squares is more to the post office. Instead, the communication is superimposed on http (s). RDEP and IDIOM specify the formats of messages asking events and sending of control operations. The eventServer and the controlTransactionServer are 2 services web where it is implemented.
RDEP and specifications of the IDIOM are available by request (please contact the TAC)-based and requires the signature of certain legal documents.
Configuration is no longer in the symbolic function configuration files. Instead, the configurations are in XML format and should only be changed via the CLI, IDM or VMS user interfaces (advanced users may be able to use LANGUAGE to change configurations by using the controlTransactionServer, but this is not recommended for the majory of users)
The log files are no longer used. Instead, the events are stored in a circular eventStore of 4 GB, and IP logs are stored in the storage of circular package 500 meg.
The underlying operating system is now Linux rather than Solaris.
The standard unix shell is replaced by a more Cisco like CLI to configure and manage the sensors.
NOTE: The Linux bash shell is always accessed through a special account 'service' ('service' a privilege level assigned to a created user account). To the account 'service' should be used only for debugging and troubleshooting under direction of the TAC.
-
Cisco ASA 5505 VPN L2TP cannot access the internal network
Hello
I'm trying to configure Cisco VPN L2TP to my office. After a successful login, I can't access the internal network.
Can you jhelp me to find the problem?
I have Cisco ASA:
within the network - 192.168.1.0
VPN - 192.168.168.0 network
I have the router to 192.168.1.2 and I cannot ping or access this router.
Here is my config:
ASA Version 8.4 (3)
!
interface Ethernet0/0
switchport access vlan 2
!
interface Ethernet0/1
!
interface Ethernet0/2
!
interface Ethernet0/3
!
interface Ethernet0/4
!
interface Ethernet0/5
!
interface Ethernet0/6
!
interface Ethernet0/7
!
interface Vlan1
nameif inside
security-level 100
IP 192.168.1.1 255.255.255.0
!
interface Vlan2
nameif outside
security-level 0
IP 198.X.X.A 255.255.255.248
!
passive FTP mode
permit same-security-traffic intra-interface
the net-all purpose network
subnet 0.0.0.0 0.0.0.0
network vpn_local object
192.168.168.0 subnet 255.255.255.0
network inside_nw object
subnet 192.168.1.0 255.255.255.0
outside_access_in list extended access permit icmp any any echo response
outside_access_in list extended access deny ip any any newspaper
pager lines 24
Enable logging
asdm of logging of information
Within 1500 MTU
Outside 1500 MTU
IP local pool sales_addresses 192.168.168.1 - 192.168.168.254
ICMP unreachable rate-limit 1 burst-size 1
don't allow no asdm history
ARP timeout 14400
NAT dynamic interface of net-all source (indoor, outdoor)
NAT (inside, outside) source inside_nw destination inside_nw static static vpn_local vpn_local
NAT (exterior, Interior) source vpn_local destination vpn_local static static inside_nw inside_nw-route search
!
network vpn_local object
dynamic NAT interface (outdoors, outdoor)
network inside_nw object
NAT dynamic interface (indoor, outdoor)
Access-group outside_access_in in interface outside
Route outside 0.0.0.0 0.0.0.0 198.X.X.B 1
Timeout xlate 03:00
Pat-xlate timeout 0:00:30
Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
Floating conn timeout 0:00:00
dynamic-access-policy-registration DfltAccessPolicy
identity of the user by default-domain LOCAL
AAA authentication enable LOCAL console
the ssh LOCAL console AAA authentication
AAA authentication http LOCAL console
Enable http server
http 192.168.1.0 255.255.255.0 inside
No snmp server location
No snmp Server contact
Server enable SNMP traps snmp authentication linkup, linkdown warmstart of cold start
IKEv1 crypto ipsec transform-set my-transform-set-ikev1 esp-3des esp-sha-hmac
transport in transform-set my-transform-set-ikev1 ikev1 crypto ipsec mode
Crypto-map Dynamics dyno 10 set transform-set my-transformation-set-ikev1 ikev1
card crypto 20-isakmp ipsec vpn Dynamics dyno
vpn outside crypto map interface
Crypto isakmp nat-traversal 3600
Crypto ikev1 allow outside
IKEv1 crypto policy 10
preshared authentication
3des encryption
sha hash
Group 2
life 86400
Telnet timeout 5
SSH 192.168.1.0 255.255.255.0 inside
SSH timeout 30
Console timeout 0
management-access inside
dhcpd address 192.168.1.5 - 192.168.1.132 inside
dhcpd dns 75.75.75.75 76.76.76.76 interface inside
dhcpd allow inside
!
a basic threat threat detection
Statistics-list of access threat detection
no statistical threat detection tcp-interception
WebVPN
internal sales_policy group policy
attributes of the strategy of group sales_policy
Server DNS 75.75.75.75 value 76.76.76.76
Protocol-tunnel-VPN l2tp ipsec
user name-
user name-
attributes global-tunnel-group DefaultRAGroup
address sales_addresses pool
Group Policy - by default-sales_policy
IPSec-attributes tunnel-group DefaultRAGroup
IKEv1 pre-shared-key *.
tunnel-group DefaultRAGroup ppp-attributes
ms-chap-v2 authentication
!
class-map inspection_default
match default-inspection-traffic
!
!
type of policy-card inspect dns preset_dns_map
parameters
maximum message length automatic of customer
message-length maximum 512
Policy-map global_policy
class inspection_default
inspect the preset_dns_map dns
inspect the ftp
inspect h323 h225
inspect the h323 ras
inspect the rsh
inspect the rtsp
inspect esmtp
inspect sqlnet
inspect the skinny
inspect sunrpc
inspect xdmcp
inspect the sip
inspect the netbios
inspect the tftp
Review the ip options
!
global service-policy global_policy
context of prompt hostname
no remote anonymous reporting call
Cryptochecksum:5d1fc9409c87ecdc1e06f06980de6c13
: end
Thanks for your help.
You must test with 'real' traffic on 192.168.1.2 and if you use ping, you must add icmp-inspection:
Policy-map global_policy
class inspection_default
inspect the icmp
--
Don't stop once you have upgraded your network! Improve the world by lending money to low-income workers:
http://www.Kiva.org/invitedBy/karsteni -
Can I get the internal details of the filesystem ReFS?
Hello!
Can I get the internal details of the filesystem ReFS?
Thanking you in anticipation.
Concerning
Hi Siddique,
Please contact Microsoft Community.
Windows clients want an economic platform that maximizes the availability of data, can effectively scale to very large volumes of data across various workloads, and guarantees the integrity of the data using the resiliency to corruption (regardless of hardware or software failures). REF is a new file system that targets those needs while providing a basis for future innovations. I suggest you read the article for more information.
Overview of resilient file system
https://TechNet.Microsoft.com/en-us/library/hh831724.aspx?f=255&MSPPError=-2147217396
Hope this information helps. Reply to the post if you need help or information on this issue.
-
Where is the internal microphone located in an Acer V5?
Original title: microphone
could someone help me find the location of my internal microphone? It's an acer v5... Thank you
Hi Roman,
I ask you to answer a few questions, so that we can diagnose this problem properly:
Are you facing problems with the microphone? The microphone works well?
I would like to inform you that the internal microphones are hidden and their location depends on the model and manufacturer of the computer. I ask you to contact them for assistance with the microphone location.
Please get back to us with more information regarding this issue.
-
Update the internal event address field?
It seems that an internal event can only trigger an external call. Is it possible to have the internal event update to a contact field in addition to trigger the external call?
Hi Tom
While an internal event cannot update a contact field, depending on what you are trying to accomplish, we can use update rules to fill the contact fields.
For example, if the 'event' is open e-mail, you can create a filter to capture all contacts who have opened one/all email, it fuels a program that will run a update rule to push a certain value in a particular contact field.
What is the use case? I'm sure we could find other solutions too.
Zainab
-
Is it possible to reinstall or reset the internal microphone of an iMac?
Some background information:
27 "iMac 5K (end of 2015) running OS X El Capitan (when the problem started), to give birth to Sierra of MacOS. Also have a Bootcamp with Windows installed 10 partition.
A month ago, when under OS X, I noticed the internal mic produced some static when you try to use it. Audio messages in voicemails would be static instead of my voice. The weird part? If I switched to Windows 10, the internal microphone works without any problem. I can ask questions of Cortana, I can record voice messages and they read without static electricity. In fact, no matter what I use the microphone internal to in Windows, it works perfectly.
Sierra of MacOS is out, so I hope that this update may be a BONE would settle the matter. Nope. Internal microphone still does not work on MacOS, but still works perfectly in Windows 10. It is because of this that I am positive the internal MIC is not broken or have a loose wire.
I went through a few steps to try and fix the internal microphone, such as resetting the SMC... but nothing has worked. Any help or ideas on how to solve this problem would be greatly greeted.
Hello dear user
Thank you to use Apple support communities
My recommendation would be to take it to an official Apple store, workers are espceialists, they might be able to fix, make sure also that you have never removed the water on top of the mic. In my iPad, a drop of water directed the music video of speaker if she never exceeds 30% volume of the music.
But if you don't have a store nearby, uninstall malware and unnecessary software, make sure that you don't have a program that allows you to change your sound (like Skype) systems, if you don't do that this program has no impact on your microphone. (I used to have Skype but it also makes audio cut so terrible, piano music sounded like heavy metal music, so heavy metal music was like to...) I don't know what to say.)
-
audio output lists only the internal speakers when usb is connected to the dac
This problem happened after I had used my mbp for months as music server in a stereo system. When I have the mbp connected via USB to an external digital to analog converter (dac), audio preferences had always listed the CAD. Now it lists only the internal speakers. I tried to reboot, checked my UBS cable, checked my dac. The only thing I've done recently is to create a playlist and sync a new iPod to copy the playlist we. I don't know if that could have anything to create the problem of lack of dac, but I am a relative novice on computers.
Anyone have this problem or knows how to fix?
-Try other USB port
-The signs to see the CASD of life like the lights on?
-Maybe the CAD failed.
-Try the following
-Try to reset memory NVRAM/PRAM and SMC
MacIntel: Reset of the controller (SMC) system management
https://support.Apple.com/en-us/HT201295
Subject of memory NVRAM and PRAM
https://support.Apple.com/en-us/HT204063
-Try to start safe mode
OS x: what is Safe Boot, Safe Mode?
https://support.Apple.com/en-us/HT201262
-Start to recovery and repair the startup disk
OS X: on OS X Recovery - Apple Support
https://support.Apple.com/en-us/HT201314
-If it is repairable reinstall the OSX
How to reinstall OS X on your Mac - Apple Support
https://support.Apple.com/en-us/HT204904
-If you do not have a backup using disk utility to restore the internal drive to an external drive, so that you can try to recover the data.
Format the boot disk and then do a fresh install of Mac OS x
-
How to exclude the songs, didn't like in a smart playlist
How exclude the songs didn't like in a smart playlist.
Note the songs that you don't like as 1 Star then add side is not 1 star smart selection criteria.
Maybe you are looking for
-
Cannot sync my movie rented to my Ipod Nano
I rented a movie on my Mac today, but it cannot sync with my Ipod Nano. It says I have to connect to the internet, but I know I can't do it on an Ipod Nano. Someone please help!
-
I received an e-mail from Windows Live Hotmail, who said that if I sent them my name, username, password, date of birth and country, that they were going to close my account, this dosen "t his right to me! Can someone please HELP thanks D.
-
hp2540: Samsung 6 wireless printing
I am trying to print from my Samsung 6 and have installed HP printing service taking in and see my wireless printer and I am also on the network, but when I take a picture of my gallery there is no icon menu to print from? Please help and thank you.
-
String.startsWith always returning true.
Hello, I have a small issue that has been driving me nuts. I am a beginner in Java, so the problem is most likely something stupid that I monitor, so I would like another opinion. Basically I have a listfield I want to make it searchable. I had anoth
-
Hi allWhat are all the new features that is available for Oracle dataguard in 12 c that are not available in 11g?Thank you