Excluding an Alt hierarchy when you generate a report EN studio

Similar Questions

• OBIEE 11 g: get incorrect results when you browse detailed report summary.

  Hello

  I get incorrect results when you browse detailed report summary.

  Please find the attached document, I have gives step by step with screen shots.

  Please let me the problem and the solution.

  Kind regards

  Srinivas.

  1. What are you going through the link of action, only pass you the values (between 61 and 65) and Total, are

  If so that the parameter value will not restrict your report in detail, try filterout gender and age (between 61 and 65) group through action link.

  2 Total, to filter only the sex,

  Concerning

  Rajagopal.

• My page is printed too high. When you print the report of diagnosis of iMac, top of page letters are cut off the page

  I have a hp c310a all-in-one.  When you print cd labels, graphics look good on preview before printing, but when it comes to the printer off, the graphics are about 1/4 "too high, which leaves the low" 1/4 of my blank cd label.  I printed a report of quality Diagnostic print from my mac and it came out too high.  Cut the top of the report, it began printing until the paper is correctly positioned.  When you print the Diagnostic Report of quality printing directly from the touchsmart on my printer screen, the report will print very well.  I wonder if there is a setting miss me when I go on my printout.

  Hello

  This really sounds like a parameter of the wrong paper on the computer, type or wrong size setting can cause these issues, especiallly it seems to work perfectly when printing directly from the camera.

• No sound when you edit video using Pinnacle Studio V12.1

  Pinnacle Studio V12.1 running more on Vista with SP2. When editing film not files on Studio no sound, IE can not insert the speech or read his return. Have reinstalled Pinnacle again without success.
  Another application running on PC is ok for her.

  Hi grey Nomad,

  1 when was the last time it was working fine?
  2. did you of recent changes on the computer?

  It seems that some settings within the program must be checked.
  I suggest that you contact the vendor of the software for more information.
  http://www.pinnaclesys.com/publicSite/us/support/consumer+support/

  For extra support, post your request in the forums of Pinnacle and check.

  http://forums.pinnaclesys.com/forums/default.aspx

  I hope this helps!

  Halima S - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Pop filter when you save a report is displayed in the background.

  Hi, in Win 7 - when you try to have a screen pop up to ask the user where to save their report, it is now appear behind the scenes (we can get it through the Task Manager, but is not acceptable).  It is currently in the environment of WNT, but I don't know how to operate in W7.  Also, I have limited access to a machine with W7 in order to try to find a solution has been slow going. I was wondering if there is an option that must be activated or something, I learned to write in the code. Any help would be appreciated. Thank you.

  original title: Pop up screens in Windows 7 appears.

  Hi Maag2,

  (1) are computers on a domain network?
  (2) did you make changes on the computer?

  I would like you to post your question in the TechNet Forums only if; the computers are on a domain network.

  As the Forums TechNet if address to an audience of it professionals, your request will be reviewed properly there.

  Check out the link-

  TechNet forums

  Hope this helps!

• interactive report formatting disappears when you run custom reports

  I have an interactive report with several variations as the public.
  I also put some column widths and the table set shaped with javascript "when loading the page.
  
  If the user goes to a public report the javascript is executed, not in form is not displayed.
  
  Is there a place of javascript to put the code to execute when run it public reports to interactive reports?

  kgough wrote:
  I have an interactive report with several variations as the public.
  I also put some column widths and the table set shaped with javascript "when loading the page.

  It is impossible using CSS?

  If the user goes to a public report the javascript is executed, not in form is not displayed.

  Is there a place of javascript to put the code to execute when run it public reports to interactive reports?

  Use a dynamic Action "After Refresh" on the IR region.

• How to hide the Alt description when you hover over your links?

  I was told that you must have a description for images, links to just about everything. But when I saw my Web site and hover over the links, a yellow box will appear with the description of the images. How can I hide this?

  You're seen with an old (very old?) version of Internet Explorer, which is the only browser on earth that does what you describe.  All other browsers follow the rules and leave only alt attribute values (what they do).

  You can choose to ignore it, or 'kill' by adding a title attribute which is empty, for example,

  In addition, you add alt attributes to images for accessibility reasons.  People who browse with images turned off (and there are) or the people who use the devices and accessories functional screen (screen readers) need some indication that there is a picture in the place where they are to search/playback.  Therefore, you only want to add content to these alt attributes, where it is important to the message of the page (that is, a cosmetic image only would just a value of an empty alt attribute). And you only need them for pictures, not for any other element of the page...

• maintain the folder hierarchy when you import the HD?

  On my HD, I have a folder called 1-50 top-level, then under folders 1-10, 11-20, 21-30, 31-40, and 41-50.  In a subfolder, 1-10, are sub-sous-records; 1-trip, 2-aunt Sally, 3 - Bob marriage, etc. that actually contains the pictures. Is it possible to import the folder named 1-50 and hold this whole structure?  If this isn't the case, how best to rebuild in Lightroom so that he can find good sources on the hard drive?

  You choose to add (as opposed to the copy or move) on the menu at the top of the import window.

  Which leaves the files in place on your disk.

• How to remove the blue coloration of a bibliographic hyperlink when you generate a pdf from LaTeX?

  I need to produce a b + w pdf for a thesis or printing will levy a tax of color for all pages with even a hint of color.  I can't seem to find a way to remove the color in LaTeX can remove it from the pdf file.

  You do not want to communicate with a person who deals with LaTex. Drive cannot change the link colors.

• Display the dialog box when you open a report

  Hi all
  
  Currently, in one of the dashboard, for a particular report, I selected the link display in a separate window (properties-> display options - > link in a separate window). Since then, all the print, download links are displayed at the bottom of the report, users are Dungeon forget these links. I tried to post the links at the top of the report and tried the solution that I found on the forum. but, no luck.
  
  Instead, I want to display a warning message when they click on any part of the report in the newly opened window (since then, I've selected display options - > link in a separate window). If I create an alert by using narrative view box, the alert box will be open, if I click on that particular place.
  
  But, my requirement is, should the popup box are displayed by saying: "Please scroll to the bottom of the page to download/print the report" when users click on any where, on the report.
  
  Is this possible at all? I appreciate your help in this regard.
  
  Thanks in advance.

  -Is it possible to have the following views
  View 1: static text + pivot table1
  See 2: narrative view + pivot table2?

  In other words, is it possible to have fixed views as a point of view? Please notify.

  Thanks in advance.

  Yes, you can.

  (1) create all your individual points of view.

  (2) put the static text and Pivot Table in the Layout of the compound.

  (3) duplicate available composed to get Compound page layout: 2

  (4) while Compound layout: 2 delete and add narrative view and Pivot Table views: 2.

  (5) duplicate Mateur mode once more for the compounds page layout: 3

  (6) create the view selector with implantation and setting compound in page: 2 compound as the two points of view. Name them appropriately.

  (7) in the Layout composed: 3, delete all notices and add selector display.

  Now, users can switch between the two sets of views.

  Edited by: David_T on October 5, 2010 14:48

• Essbase Error (1013289) when you run a report in the workspace 11.1.2.1

  Hi gurus,

  I get the following error at the whe Workspace, you try to run a report EN to the workspace:

  Query error: error: internal error Essbase JAPI: [cannot perform view cube operation. ] [ Essbase Error (1013289): command [MdxReport] failed due to memory allocation failure]

  This is the first time happened in this environment and I already checked the free memory space and everything seems fine.

  Could someone help me on this?

  Thanks in advance

  concerning

  To the right...

  I found the solution after reading the article on https://blogs.oracle.com/pa/entry/epm_11_1_2_ulimit

  Thank you

• In the report previewer of run time, when you click on file-> generate file->

  In the report previewer of run time, when you click on file-> generate file-> RTF, PDF, etc...
  
  I want to disable this option in the report, pl suggest
  
  Kind regards

  Hello
  I guess you are using reports 6i, so in this case, you must pass the following parameter when you run the report
  for example
  DISABLEFILE = YES

  Best regards, RZ

• Grid toggle when you use vertical tools, LR 5.3

  For after the video tutorials online for LR5, pressing [CTRL] + [ALT] + O when you use the vertical tools in the part of Correction of the lens design tools will toggle the Overlay network and outside.  When the grid is displayed, the tutorials also show it would be a top/Center options toolbar that has calibration and transparency controls to customize its appearance.  This key combination doesn't seem to work for me in LR5.3.  Has it been modified, deleted, known, bug or I do something wrong?  (LR 5.3, Win 7, 32 - bit)

  I think you could talk about two different grids.

  There is the auto-grille that lights up when you access any slider in the manual lens correction tab - it is transient and not definable by the user.

  There is the magnifying glass which is consulted withi opinion collection grid > magnifying glass Overlay feature. So the key [CTRL] [ALT] [O] to work, you have to select a grid, Guides, or Image first to superimpose. Then, it works as expected. I suspect that if you turn on the grid by checking it in view > Loupe Overlay, it will work as expected.

• El capitan crashes when you are connected to the internet ONLY

  If not connected to the internet, the computer will run all day without any problem, any help would be great, thanks

  These must be run as administrator. If you have only one user account, you are the administrator.

  Please launch the Console application in one of the following ways:

  ☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).

  ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

  ☞ Open LaunchPad and start typing the name.

  In the Console window, select

  DIAGNOSIS AND diagnostic USE information reports ▹ System

  (not diagnose them and use Messages) in the list of logs on the left. If you don't see this list, select

  List of newspapers seen ▹ display

  in the menu bar.

  There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points downwards. You will see a list of reports. A report of panic has a name that begins with "Kernel" and ends with ".panic." Select the most recent. The content of the report is displayed at right. Allows you to copy and paste to validate all of the content, text, not a screenshot.

  If you don't see any report, but you know, there was a panic, you have chosen diagnostic and using the list of Log Messages. INFORMATION on the USE of DIAGNOSTIC AND choose instead.

  In the interest of privacy, I suggest that, before posting, you change the UUID ' anonymous, ' a long string of letters, numbers and dashes in the header of the report, if it is present (it cannot be). "

  Please do not post other types of diagnostic report.

  I know that the report is long, perhaps several hundred lines. Please report all this anyway.

  When you post the report, an error message may appear on the web page: "you have included content in your post that is not allowed", or "the message contains invalid characters." It's a bug in the forum software. Thanks for posting the text on Pastebin, then post here a link to the page you created.

  If you have an account on Pastebin, please do not select private in exposure menu to paste on the page, because no one else that you will be able to see it.

• -Error 500 internal server when you use BI Publisher in OBIEE 11 g

  Hello!

  When you access a report created in Plubliser BI using LDAP users, you get the error message:

  Error 500 - Internal server error

  They know tell me if I need to configure anything on the Administration > Manager of BI Publisher?

  Thank you!

  Carina Mendes.

  Hi Felipe,.

  We have solved the problem,

  We had DefaultAuthenticator users and LDAP equal, it's contradictory authentication on BI Publisher.

  We have solved the duplicity of eliminndo of the problem and make a guide of refreshment.

  Thanks for the support!

  Carina Mendes.