exe application 0xc000007b application error failed to initialize properly on startup.

Similar Questions

• Explorer.exe - application error failed to initialize properly (0xc0000022)

  Help!

  I don't have any idea what to do! my computer is not working the 'start' box disappeared also a text box comes up saying error explore .exe-application failed to initialize properly (0xc0000022) click ok to finish then all I get is a black screen. I tried to restart and it says it is update 1 of 3, then stops, but when you next turn to the new it still does not work.

  Hello

  that is 'safe mode' - did you try to run?

  How to run WIndows Vista "safe mode" is here: "".

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  and in 'safe mode' (if it works) try to run "System Restore":

  http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions

  part

  How to start the system restore?

  LC

• When I start my computer, I get this message: fm3032.exe. application error fail to initialize and it is not allowing me to open the files on my desktop or access the system restore? My OS is XP

  My operating system is windows xp

  http://www.file.NET/process/fm3032.exe.html

  Read this thread and see if you have list them installed programs.

  Also, follow these steps:

  Download, install, update and scan with these full free malware detection programs:

  Malwarebytes (MMFA): http://malwarebytes.org/

  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/

  http://www.Microsoft.com/security/scanner/en-us/default.aspx Security Scanner   

  Post back with the results of the analyses and also answer the following questions:

  brand and model of the pc

  current antivirus

  What service pack?

• STOP: C0000145 (ERROR of APPLICATION), the application failed to initialize properly (0xc0000005)

  STOP: C0000145 (ERROR of APPLICATION), the application failed to initialize properly (0xc0000005).  Click OK to close the application.

  Occurs when I try to restart my laptop and ends the boot process.

  03/08/11 I get this same error, and I see that nobody has answered it yet. DPR anyone has any idea other than a new image for this problem?

  Rodolphe/Spyware/Malware infection, blue screens don't have an option to click OK to finish or even forget that you can click on anything. If you do not work in safe mode or even last known good configuration you can try a repair installation, but you can still loose data like that. I would just pull the information you need out of the HDD using a speaker and then wipe and start over from scratch. Don't forget to scan your files if you do not import everything using a speaker. However if you can access the mode safe mode with networking, try to download malware bytes and running (don't know how its spelled) it will remove files such as _is27.exe which is a (Rogue.Installer).

• Isass.exe failed to initialize properly, click on ok to terminate the application (OXC0000005)

  I am running windows XP 32-bit (windows XP (R) (Build 2600.XPSP_3_gdr.101209 - 1647: SP3 & IE8) and had no problems at all until I decided to have a good wipe and reinstall XP.) I have a recovery disk only.

  Everything went well until I installed updates to SP3 - the service pack itself did not cause the problem only updates thereafter.
  I reinstalled windows 3 times now and will continue to receive these error messages:-Isass.exe failed to initialize properly, click on ok to terminate the application (OXC0000005)
  I also get exactly the same message with savedump.exe replacing the lsass.exe
  I don't know that I have no virus or anything bad like and I can not even start in safe mode. My pc is no longer needed.
  Can anyone help with this please?
  Thank you
  Note - also runs the firewall Zone alarm and Avast antivirus: both are up to date.

  See this: http://en.kioskea.net/forum/affich-87892-lsass-exe-and-services-exe-application-error

• "ibrytdesktop.exe. the application failed to initialize properly (0xc0000135)" when the computer is turned on.

  Original title: need help please

  Ive had an application error, ibrytdesktop.exe. Note ISC, the application failed to initialize properly (0xc0000135), click ok to close the application. Can this happens whenever the computer is on how I fix

  Hi petrospapamihelakis,

  Looks like one of the installed program on the computer has been corrupted.

  ·         Have you checked the problem in safe mode?

  Step 1: Try to start in safe mode to see if you get the error.

  Step 2: If he is able to start very well without any errors, and then try to try perform a clean boot to normal mode to check whether a third-party program is causing the problem.

  How to configure Windows XP to start in a "clean boot" State

  You can also read the following article to resolve the problems on the issue.

  Perform a clean boot to determine if background programs interfere with your game or program.

  Note: Make sure that you put the computer to a Normal startup once you are finished.

• Reinstallation of Windows Media Center XP error, the application failed to initialize properly (0xc000135

  I had to install a new hard drive after the death of my old. I use my Dell recovery/reinstallation disk. The first time I tried installing that it froze after the reboot. I then did a repair installation (twice) and each time got the following error:

  PxShare.exe Application error.

  The application failed to initialize properly (0xc000135).  Click OK to close the application.

  It appears at the end of the installation, but when my login screen is displayed, it shows only one account, administrator and request a password. I have not configured any accounts when I did the installation and you do not have a password. I tried to enter without password, using admin as password and check-in safe mode did not help - it still asked for a password.

  I don't know if the two problems are related or not.

  Thanks for any help!

  Hi Lowery619,

  (a) If you have external devices unnecessary connected to the machine, unplug them.

  (b) thereafter, you can try reinstalling Windows XP.

  For more information, please visit this link: install, reinstall, or uninstall Windows

  Install Windows XP

  Hope the helps of information.

  Please post back and we do know.

• Lsass.exe application error application cannot initialize (0xc0000005). "

  "lsass.exe application error the application failed to initialize (0xc0000005)", on a XP Pro Dell desktop computer.

  I read all the answers to this problem.
  He left me confused.
  I'm not a guru of the PC (fair mainframes)
  I'm from the old school.
  I want to just fix this problem after trying all the F8 approach.
  I'm about to pay someone for everything again with a wipe HD and install OS up tp SP3.

  Or... I can jump to the 'other side' in total! (My son has never such problems with its Apple/Mac but only complained not enough software and comes to me so that he cannot find solutions.)

  I have studied this XP - OS on a Dell computer for a few days and now know enough to be dangerous.

  In addition, this problem appeared after you apply a few serious fixes MS?

  I don't know yet how to get the BIOS.  I'm not yet technically strong (but necessarily be).

  How can I download necessary patches with a white screen?

  I have never tried a reinstall of XP.

  I have the following CD:
  * Reinstallation CD MS Win XP Home Edition (SP1 included)
  (Currently up to SP3)
  * Application: To reinstall Dell Tools System Software
  * Dell Dimension Resource CD
   
  Dell has 2 partitions: C:\ (the system, Windows software, etc.) and D:\ (all my data, etc.)

  So... There you have it.   And, of course, would sincerely appreciate your help.

  And Yes... I am committed to give once I have something to give back.

  It's great to have someone on "this side of the fence!   (my son is still laughing - %^$#@!)

  trikericy,
  Unfortunately, there are several things that can cause this problem, including viruses.  Usually by pressing F2 when a Dell system is powered, you will have it in the BIOS.  But you may need to check with Dell for your specific model.

  If you are able to boot from reinstall drive and enter the Recovery Console, you can run the following commands to see if they will help to clarify this.

  Chkdsk /r

  sfc/scannow

  If the recovery disc provided does not offer the console recovery or these elements do not disable upward, then you can perform a factory restore to reload Windows.  You will need to check with Dell on recovery options they offer.  However, since you have 2 drives, it looks like all your data will be safe and it is only a matter of reinstalling programs.  If you do a factory restore, then I suggest updating Windows before reinstalling applications.

  Hope this helps out.

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• How solve this error message application failed to initialize properly 0xc0000005 on start up

  Hi my name corri I have a computer laptop advent. When I start my laptop it goes to the widowed loding fine screen but then when it goes beyond this point he then goes to this error message

  (application failed to initialize properly 0xc0000005) then I click on ok, then it is once again, then I click ok again then it goes. then after it will theres just a blank screen without icons or nothing... I can't even open Task Manager some can help me please solve it!

  Hello

  You can try the steps below and check if that helps. You need the Windows XP installation CD to go forward with the steps below.

  (a) use the Recovery Console, which is described in the article below.
  http://support.Microsoft.com/kb/314058

  Note: You must make sure that your primary boot device is CD drive - go into the BIOS to ensure, if necessary,

  (b) (b) demarrer start from the Windows XP installation CD-ROM, and then use the EXPAND command, like this:
  Expand d:\i386\wininet.dl_ c:\windows\system32\wininet.dll

  Note: Where d: is the CD-ROM drive

  (c) then type EXIT and when the pc reboots, you should be able to boot XP.

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• The appilcation failed to initialize properly (0xc000007b). Click OK to close the application.

  The appilcation failed to initialize properly (0xc000007b). Click OK to close the application.

  Help please.  My computer has been infected by a virus some time ago.  I have cleaned the virus and now get the following message is displayed.

  Running Vista Home Basic Service pack 2 32-bit system.

  In particular I am getting kind of Spider solitaire, but I think I've noticed this on other games/programs of microsft preinstall.

  I have run chkdsk /f and / r but still have the same problem.  Thank you in advance.

  Hello

  It happens with any application?

  Method 1: You can also put the computer to boot and check if any third-party application is causing the problem:

  http://support.Microsoft.com/kb/929135

  Note: after a repair, be sure to configure the computer to start as usual as mentioned in step 7 in the above article.

  Method 2: I suggest you to run the SFC scan to make sure that the system files are intact:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Check in the case where the Viewer for any question regarding newspapers

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-information-appears-in-event-logs-Event-Viewer

• If I update to windows 7 it will fix error application failed to initialize properly?

  When I try to open certain programs I get application failed to initialize properly.

  I want to know if I upgrade from Windows Vista to Windows 7 will be the mistake still be there?

  Will he take it?

  Thank you

  Mildred W.

  Hello

  1. Since when are you facing this problem?

  2. don't you make recent changes?

  3. What is the full error message?

  4. what programs you try to run?

  If you upgrade Windows Vista to Windows 7, once again depends on what program you use. If there is a problem with this program, you could get the same question.

  If these programs are third-party programs, so I suggest to uninstall and reinstall once and check to see if the same problem happens.

  Alternatively, you can also try to restore the computer to an earlier point and check if it helps:

  http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions

  It will be useful.

• Unable to open the program. I get this: lightroom.exe - application error: the application could not start corrrectly (0xc000007b). Click OK to close the application.

  Lightroom.exe - application error: "the application could not start correctly (0xc000007b). Click OK to close the application. »

  I use lightroom 5.

  Please see the troubleshooting link: Solutions for Photoshop Lightroom 0Xc000007b error

  Kind regards

  Mohit

• Pavilion x 360: AccelerometerSt.exe - Application error

  From the start, I get the following error.

  AccelerometerST.exe - Application error - the application failed to start correctly (0xc000007b).  Click OK to close the application.

  My system shows now that he needs for the update but it will not complete the process.  No matter if I select shut down or restart.

  It started a few weeks ago.  What should I do about it?

  Hello

  Try the following.

  Open Windows Control Panel, open programs and features, make a right click the entry for HP 3D DriveGuard and select uninstall - don't worry if you get an error at this point, just continue.

  When this has completed, restart the laptop.

  When windows has reloaded, download and install the version of HP 3D DriveGuard on the following link.

  http://ftp.HP.com/pub/SoftPaq/sp67001-67500/sp67280.exe

  Kind regards

  DP - K

• Explorer.exe - application error

  I downloaded Internet explorer 8 for windows xp, after the system restarted, a pop-up box appears which says 'explorer.exe - application error. The application failed to initialize properly (0xc0000005). Click on OK to terminate the application. "there are no icons on the desktop so I can't even in the Panel of control etc. How can I get this sorting?

  Hello DF2012OZ,

  You are able to get in Mode safe?

  If so, check in the case of the newspapers to see if you can see a similar error message. It can give more details.
  Then try to run Chkdsk to check for errors. Right-click your drive, go to properties, tools and error checking.

  You can also do a system restore to get back before you receive the error in the Solution Explorer.

  Article number: 306084 - How to restore Windows XP to a previous state
  http://support.Microsoft.com/kb/306084
   
  Let us know if that helps.

• When I try to log on my "HP Pravillion 553w" userinit.exe Application error comes up and asks me to click ok to terminalte request. What can I do to connect to my computer?

  "When I try to connect my computere"HP Pravllion 553w"userinit.exe Application error comes on and says" application failed to initialize, click on ok to terminate the program. I just want to open a session. I don't know what made it? can someone help me please.   Georgia

  Hi, Georgia,

  This could be a limitation of the fast user switching feature.

  The fast user switching feature may not work if there is insufficient computer resources to create a new Winlogon service thread. When there is insufficient resources, the system may stop responding (hang), the system may lock up computer or the user may receive a Userinit.exe error application and the following error message:

  The application failed to initialize properly (0xc000012d)

  Method 1: In these cases, some users must log on to the computer, or you must close some programs to free up the resources of the computer.

  For more information, see:

  A discussion on the availability of the fast user switching feature

  This problem may also occur due to registry settings incorrect shell.

  Method 2: Try the steps listed here.

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows

  http://support.Microsoft.com/kb/322756

  To resolve this issue, follow these steps:

  a. press CTRL + ALT + DELETE and then click Task Manager.

  b. on the file menu, click new task (run...).

  c. type regedit and then click OK.

  d. in the left pane, look for, and then click the following registry subkey:

  HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon

  e. in the right pane, double-click Shell.

  f. in the value data box, type Explorer.exe, and then click OK.

  g. in the right pane, double-click Userinit.

  h. in the data value box, type %windir%\system32\userinit.exe and then click OK.

  Note The %windir%\System32 placeholder represents the path of the Windows folder. By default, C:\WINDOWS is the path of the Windows folder.
  If you type an incorrect value in the value data box, you cannot connect to the Windows XP-based computer.

  i. exit the registry editor.

  j. restart the computer.

  Check if this can help you.