Execution trace toolkit Office accident 2009 windows 7?

All successfully run 2009 desktop Execution Trace Toolkit in Windows 7 64 bit?

I had labview 8.6 installed, upgraded to LV2009 (64-bit) and installed the trace resource kit.  I run, but completely lock up.

Since then, I tried to install the client LV2009 (32 bit) and the Toolbox even trace.  Now the trace toolkit will crash before anything happen on the screen.  It is not even appear in the Explorer of MAX.

Any guidance would be apprecieated. Thank you.

For the follow-up of this...

I had been running a DETT trial license since our License Manager has been out of country.  As soon as I was able to get a license of real it stopped crashing.  I'm under LV 32-bit on Windows 7 with DETT now with or without problem.  OR support was outstanding.

Tags: NI Software

Similar Questions

  • Real-time execution trace toolkit to optimize the Labwindows/CVI code


    I am trying to optimize a code in real-time in LabWindows/CVI by minimizing the time of each section of the code is taking and find bottlenecks in the code. I check this time using the real-time execution trace toolkit.

    However, I just found it seems to be a constant error when you use the tool of real-time execution trace.

    When I put the traceviewer 'start' and 'stop' right after the other, I get around shift schedule 9us. It seems that the CPU will in some "idle" after the start of the trace mode, or maybe it's the time of communication or something.

    I'd appreciate it if someone could give me an idea of why this is happening. The time of real-time application window is very limited and I'm trying to minimize the time as much as possible. Even the United States 9 error is difficult to resell.

    I used the following code:

    TraceConfigure (1, 1, 0, 25000, NULL);
    TraceStart ();
    TraceStopAndSend (HOST_ADDRESS);

    and there is a photo in the toolkit of real-time execution trace.

    Thank you.

    Generally, you might be better off picking off the clock at the beginning and end of what you want to track. RTETT my introduce overhead that becomes difficult to quantify... Which is what you probably already see. The debug mode will also implement a ton of overhead. Then... Destemming of the clock in release mode will probably give you you the best estimate.

  • LV15 desktop Execution Trace Toolkit does not install it

    I've just updated / installed LabVIEW Developer Suite 2015, but the execution Trace Toolkit (DETT) erroneous office on and impossible to install.

    I tried to install the DETT later invited by OR updated, but suffered the same error.

    Any ideas?

    By the suggestion of OR and not knowing what was the underlying problem...

    Installation of the Toolkit download worked for me.


    Good luck.


  • Latest version of the LabVIEW Desktop Execution Trace Toolkit to support LV 8.6.1

    What is the new version of the Toolkit LabVIEW Desktop Execution Trace that supports LV 8.6.1.

    For some reason, I can't find any documentation that lists what version of the tool supports what version of LabVIEW.

    Thank you

    Issue of M.,.

    Looking through the documents Readme, it seems in fact that you can use anywhere from 1.0 for 2011 (included).

  • Office accident Exploring Windows

    I have this error below, whenever I open any folder and the window Explorer just crashes and whatever files I opened will close automatically.

    Signature of the problem:

    Problem event name: APPCRASH
    Application name: Explorer.exe
    Application version: 6.0.6002.18005
    Application timestamp: 49e01da5
    Fault Module name: StackHash_fd00
    Fault Module Version:
    Fault Module Timestamp: 00000000
    Exception code: c0000005
    Exception offset: 0d77c260
    The system version: 6.0.6002.
    Locale ID: 1033
    Additional information 1: fd00
    More information 2: ea6f5fe8924aaa756324d57f87834160
    Additional information 3: fd00
    Additional information 4: ea6f5fe8924aaa756324d57f87834160


    This article applies to this question:

    Explorer Windows stopped working

    More troubleshooting:

    Use the startup clean and other methods to try to determine the cause of and eliminate
    the questions.


    What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
    on this machine, including those you have uninstalled (they leave leftovers behind which can cause
    strange problems).

    List of tools to clean/uninstall anti-malware programs

    Uninstallers (removal tools) for common antivirus software


    Follow these steps:

    Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

    Enter this at the command prompt - sfc/scannow

    How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
    generates in Windows Vista cbs.log

    Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

    How to run the check disk at startup in Vista


    After the foregoing:

    How to troubleshoot a problem by performing a clean boot in Windows Vista
    How to troubleshoot performance issues in Windows Vista

    Optimize the performance of Microsoft Windows Vista
    To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
    Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
    reference (if you have a small box at the bottom left - show for all users, then check that).

    How to check and change Vista startup programs

    A quick check to see that load method 2 is - using MSCONFIG then put a list of
    those here.

    Tools that should help you:

    Process Explorer - free - find out which files, key of registry and other objects processes have opened.
    What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
    each process.

    Autoruns - free - see what programs are configured to start automatically when you start your system
    and you log in. Autoruns also shows you the full list of registry and file locations where applications can
    Configure auto-start settings.
    Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.

    There are many excellent free tools from Sysinternals

    -Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
    When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, the product name, Version of the file, the name of the company;
    Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
    a program that runs in your Windows startup.

    There are many excellent free tools to NirSoft

    Window Watcher - free - do you know what is running on your computer? Maybe not. The window
    Watcher says it all, reporting of any window created by running programs, if the window
    is visible or not.

    Many excellent free tools and an excellent newsletter at Karenware


    Vista and Windows 7 updated drivers love then here's how update the most important.

    This is my generic how updates of appropriate driver:

    This utility, it is easy see which versions are loaded:

    -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
    For each driver in the list, additional useful information is displayed: load address of the driver,
    Description, version, product name, company that created the driver and more.

    For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
    Control Panel - device - Graphics Manager - note the brand and complete model
    your video card - double - tab of the driver - write version information. Now, click on update
    Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
    Uninstall - REBOOT it will refresh the driver stack.

    Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
    with their own software and drivers and all other main drivers that you have.

    Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
    Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
    BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

    Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
    each installation.

    Always check in the Device Manager - drivers tab to be sure the version you actually install
    presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
    in particular that) so to install a driver - reboot - check that it is installed and repeat as

    Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
    manually by model.

    Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.

    How to install a device driver in Vista Device Manager

    If you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
    Updates, that leaves about Windows updates but it will not install the drivers that will be generally
    older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
    get new manually if you wish.

    How to disable automatic driver Installation in Windows Vista - drivers
    http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx


    Refer to these discussions because many more excellent advice however don't forget to check your antivirus
    programs, the main drivers and BIOS update and also solve the problems with the cleanboot method

    Problems with the overall speed of the system and performance

    Performance and Maintenance Tips

    Explorer Windows stopped working

    I hope this helps.

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

  • If I have two modems in the same office... windows xp can combine two connections at higher speed dial... my question is can I do the same thing for the dsl if I have two lan cards?

    If I have two modems in the same office... windows xp can combine two connections at higher speed dial... my question is can I do the same thing for the dsl if I have two lan cards?

    Hi cliffwho

    You can fill with connections to the LAN. However I recommend you read this first to understand what it is that you do. I hope this helps.
  • Why my office worsktation with Windows 7 professional not check and install updates?

    Why my office worktation with Windows 7 professional not check and install updates?

    To resolve this problem, remove the computer from the domain, and then join the computer to the domain.

    To do this, follow these steps:

    1. Use a local administrator account to log on the computer.
    2. Click Start, right-click computer, and then click Properties.
    3. Click Edit settings next to the computer name.
    4. On the computer name tab, click change.
    5. Under the title of Member of , select the workgroup, type a workgroup name, and then click OK.
    6. When you are prompted to restart the computer, click OK.
    7. On the computer name tab, click change again.
    8. Under the title of Member , select domain, and then type the domain name.
    9. Click OKand type the credentials for the user with permissions in the domain.
    10. When you are prompted to restart the computer, click OK.
    11. Restart the computer.

    Kind regards

  • cannot change the font color of office files in windows 7

    cannot change the font color of office files in windows 7
    always white and I want black (because of the background of the desktop which is necessary for my work)
    I have not finf sollution in internet
    Please help me


    Follow these steps to change the color of the font of the desktop folder.

    a. right-click on a vacuum of space on the desktop and click on personalize.

    b. click on the link to the color of the window at the bottom of the window.

    c. click the link Advanced appearance settings .

    d. Select the element in the Office.

    e. If you want to change the font, then under police pick the one you want.

    (f) to change the font color, corresponding to the location of police, you have options to change the color of the size and characteristics of the police.

    g. you can make the changes you want.

    h. click on apply and OK.

    i. now, check to see if that makes a difference.

    I hope this helps.

  • Keyboard Microsoft Office in the Windows 7

    I use a Microsoft Office keyboard in Windows Vista 64-bit Home Premium edition. I want to upgrade to Windows 7 64 bit Home Premium edition. The Upgrade Advisor said that Intellitype Pro 6.2 is NOT compatible with Windows 7. But the Office keyboard is not listed as a download driver available. Choose what keyboard so I can still use this keyboard?

    I think the keyboard is no longer manufactured and is not supported.  He (should) still works, but you will not be able to customize the way you might in Vista.

  • Why I don't see office bing on windows update

    My office has Office bing on windows update option but my laptop is not everything, even, I installed everything on my laptop, anyone know why?


    Try this: go to control panel, select Windows Update. When that opens select restore hidden in the left menu updates. See if Office Bing is in the list, if it is to check the box next to the one (s) you want to 'show' and click the restore down. Then select updates restored in the main panel of Windows Update and install.

    Let me know if this solves the problem for you.

    Kind regards


  • Still using Office 2003. Windows 8 will not open one of these programs even if I installed the converter file available.

    Office 2003.  Windows 8 will open all files sent to me with the docx file extension, even if I installed the converter of files available for download

    See http://support.microsoft.com/kb/2777626 .

    Office 2003 is not compatible with Windows 8.
  • I have an old Photoshop CS3 that was installed on a desktop computer that has crashed and is still not bootable. I now have a new office with 10 windows and I installed it and it works. Activation is dimmed, but I can't save. It is said that there is no i

    I have an old Photoshop CS3 that was installed on a desktop computer that has crashed and is still not bootable. I now have a new office with 10 windows and I installed it and it works. Activation is dimmed, but I can't save. It is said there is no internet connection, which is not correct. What should I do?

    Please read https://forums.adobe.com/thread/1499014

    -try some steps such as changing browsers and disable your firewall

    -also clear the cache of your browser if you start with a fresh browser

    -check the file hosts for blocked entries https://forums.adobe.com/thread/1912777

    An idea that MAY work to install or run some programs in Windows 10 old... works for some, not for others

    -http://www.tenforums.com/tutorials/15523-compatibility-mode-settings-apps-change-windows-1 0 - a.html

    - or run as Administrator http://forums.adobe.com/thread/969395 to assign FULL permissions can help... said yet, but sometimes it is necessary for all Adobe programs (this is same as using an administrator account)

  • Activate PDFMaker in Microsoft Office 2013 in Windows 10

    How can I activate PDFMaker in Microsoft Office 2013 in Windows 10?

    Hi filipn48437422,

    Make sure you Acrobat version is compatible with MS Office 2013 applications, Adobe Acrobat PDFMaker and compatible web browsers & operating system configuration of Adobe Acrobat.

    If the two things are compatible, try the steps in troubleshooting PDFMaker unavailable | Office 2007, 2010, 2013 | Adobe Acrobat 9, Acrobat X, XI, Acrobat Acrobat DC.

    Kind regards

  • Toolkit of Real Time Execution Trace functional limitation on targets NI Linux real time taken in charge

    We want to start by using the Toolbox in real-time to backtrace of memory allocation profile on a target of cRIO 9035 & 9039.

    The product information (http://sine.ni.com/nips/cds/view/p/lang/nl/nid/209041) page has a note indicating that the Toolbox has limited functionality on real-time OR-Linux supported targets.

    However, I couldn't find any specific details about what are these limitations.

    If anyone can clarify which restrictions apply?

    Are there alternatives (party packages) that offer a feature more complete?

    Hello Jörn,

    Did some more research, the following limitationrs occur on targets LInux RTOS,

    -The Manager of memory when used on targets of Linux, saves only data for LabVIEW processes and threads, not the global memory of the systems.
    -Wait object are not recorded events
    -Trace buffer size cannot be changed
    -Timed loop pre-emption and reactivation of SRI events are not marked

    Hope that this information helps out you in addition,

    Kind regards


    Technical sales engineer

  • reference implementation Office leak trace toolkit

    I decided to run the Toolbox to see what he does on a project and found a leak unknown 0x0A185718.  The event is described as a reference leak, and he said: it's in the top level VI and it happens when I stop the program.  The Toolbox is worm 2014 and I am running it on a sp1 project 2011.

    I noticed that when I click on an entry in the Toolbox it will take you to the location of the event.  But since this is the top level VI that doesn't really help.  I went through and closed every reference I could find, but I still get the flight of the unknown.  I tried the process example LabVIEW with the Toolbox and that seems to work very well.

    So I started to disable parts of the code and tracked the leak down to read DAQmx (analog 1 Wfm Nchan Nsamp d) .vi.  I created a test vi with only that vi and it will generate the error unknown when they are arrested.  I also tried with the DBL 2D output and had a reference unknown error.

    Is this a big deal?  No idea why it is even unknown error if it comes the DAQmx vi?

    You close and the task of clearing?

Maybe you are looking for