Existing listening channel get disabled after agree importing using Ant

Similar Questions

• BB10: Animations get disabled after App gets in cover Mode

  Hello world

  I was wondering if someone could help me with this.

  I don't know why animations get disabled after my application gets coverage, or same mode after I supend the screen.

  It is really strange, and it happened for a while now.

  Any idea how to fix this?

  Thank you!

  Note that there is an excellent chance that it is in the firmware, not the SDK. Make sure you have at least the last installation for your Dev Alpha or Simulator, so updating the SDK doesn't seem to help.

• Internal identity stores: users: getting disabled after a certain interval time

  Hi all

  Need helpl on Cisco Secure ACS 5.1

  All users are getting disabled on a time interval. find not just any setting for this.

  If anyone knows about this help please...

  Concerning

  MRS.

  Which seems to relate to a known issue:

  CSCtf06311  All internal users automatically disabled after you be connected to a single user

  If so there is a patch that can be donloaded to EAC which includes a fix:

  Release date: ACS 5.1.0.44 Patch: 5-1-0-44 - 3.tar.gpg

• report is different than the original report after export/import use icommand

  as topic,.
  I export a report and import it into a different environment, but the report is different, I have config drill anywhere in a bar chart, but he lost...
  All the tips you all?

  What version of BAM do you use to export and which version to import?
  Also, I'm sure you import report drilled through first and then the main report, right?

• How to get disabled login user (without password) at startup, so NOT to SHOW at all and so after the switch, go to desktop directly

  Vista Ultimate 64-bit

  How to get disabled login user (without password) at startup, so NOT to SHOW it to all (and needed clicked) and so after the switch, go to desktop directly?

  Also after inactivity, how to not go to sleep mode and press "power on" to bring back?

  Hello

  If you want to start directly on the desktop?

  How to automatically connect at startup in Vista
  http://www.Vistax64.com/tutorials/66966-logon-automatically.html

  Or

  How to make Vista require a user name and password when connecting
  http://www.Vistax64.com/tutorials/89812-logon-username-password.html

  =========================================

  Start - Control Panel - Power Options - upper left - require a password on wake up
  tick her do not require a password - save the changes.

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• listener class not invoked after deployment to weblogic Server

  I have a third party class (Quartz Scheduler) that implements ServletContextListener I added in my weblogic-application.xml and web.xml files as a listener. This class should support certain data in the server starts. But is not to be called.

  Technology used:

  Jdeveloper 11.1.2.3

  Weblogic 10.3.5

  Third party library:Quartz 1.6

  Everything works very well for Jdeveloper and the listener class get invoked when the application is deployed in the weblogic with the local computer. But the listener class is not called when the application deployment as .ear file in weblogic on external server server.

  Extract of weblogic-application.xml and web.xml files:

   <listener> <listener-class>scheduler.WebListener</listener-class> </listener>

  where scheduler is the name of packge and WebListener is the class of earphone

  -Important updates-

  Two projects consist of the application that I am trying to deploy the view and the model projects. For testing, I remove the model project of the application and deploy the application to a new. Quartz scheduler of work and in the listener class called WORK without model project and without interaction of the DB.

  I'll double check the data source with the web-logic Nothing seem wrong to me. I use the same source of data name in the application and as said before the application runs from JDeveloper

  I also checked the server logs. No exception or an error. demonstrate that the application is running in Active mode. But the listener class is not called weblogic when the model project is existing in the application where the DB interaction occurred.

  Any idea because of this as possible of this problem

  -------------------------------Update 2---------------------------------

  I think that this update will give any idea of the question. After clouse look in the server log after deployment, I found this line.

  NewSchedulerApplication-ViewController-context-root has context-root specified in application.xml: "NewSchedulerApplication-ViewController-context-root". The context-root specified in weblogic.xml: "NewSchedulerApplication-ViewController-context-root" will be ignored

  where NewSchedulerApplication is the name of the application.

  Finally, the issue is resolved.

  The problem is resolved after you delete the following jar files in my view-controller project: Api .jar-Trinity and the Trinity - impl.jar

• Why is - this much of my modules and extensions have been disabled after switching to firefox 6

  A lot of my modules and extensions have been disabled after switching to Firefox 6.
  No Java extensions can be used;
  my Microsoft Framework is disabled;
  my media player has disappeared;
  and my google with all of my important Favorites toolbar is missing.
  How can Firefox 6 be considered an "upgrade"?
  How can I 'recover Firefox 4 or 5'? -there is no point in using a browser which limits as many sites the necessary module!

  The Google toolbar options

  • http://KB.mozillazine.org/Using_Google_Toolbar_features_without_toolbars
  • http://www.Google.com/support/toolbar/bin/answer.py?answer=1342452

  JAVA

  -> Download & install Java SE on your system:

  • http://www.Java.com/en/
  • Click on the free Java download button

  -> Using the Java with Firefox plugin

  • https://support.Mozilla.com/en-us/KB/using%20The%20Java%20plugin%20with%20firefox

  Try to update all your modules in Firefox. You can also inquire by developers to Add - we for a version update & Firefox 6.0 took charge of the Add-ons that are not currently Compatible with Firefox 6.0.

  Check and tell if its working.

• When I tried to import pictures from my camcorder videos seem to be import of Strontium.  After finished importing is not found the videos at all.  Any ideas?

  When I tried to import pictures from my camcorder videos seem to be importing into "Strontium".  After finished importing is not found the videos at all.  Any ideas?

  What is "strontium"?

  There are 9 different versions of iPhoto and they run on 10 different versions of the operating system. Tips and tricks for dealing with issues vary depending on the version of iPhoto and the version of the operating system. In order to get help, you need to give as much information as possible. Include things like:

  -What version of iPhoto.

  -What version of the operating system.

  -Details. Full, a description of the problem as you can. For example, if you have a problem with export, then explain by describing how you try to export and so on.

  -History: Is it going hard? Everything has been installed or removed? -Are there any error messages?

  -Have what measures you already tried to solve the problem.

  -Something unusual on configure your? Or how you use iPhoto?

  Anything else you can think of that could help someone understand the problem you have.

• Whenever I try to enter KB2559049 it always gets back after the restart, saying "NOT CONFIGURED".

  original title: HELP... (seniors not if nobody PC)!

  Whenever I try to enter KB2559049 it always gets back after the restart, saying "NOT CONFIGURED" and then it lands in the updates page... So I used the Microsoft Fix - it tool and she is 'THE PLACE WHERE WINDOWS STORES DATA has CHANGED AND MUST BE FIXED... CHANGE OF PLACES in UPDATE from WINDOWS to THE SETTINGS by DEFAULT in WINDOWS'... well I think, but I don't know how the making and tool Fix - it didn't tell me how is... Please someone can help me to what is necessary.

  Hello

  I suggest you to follow these steps and check if that helps:

  Method 1:

  If you have installed a security software on the computer, then I suggest you try to disable temporary and check to see if the same problem happens. Make sure that you enable security software back once the diagnosis is made to prevent the computer from virus attacks.
  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

  Method 2:

  Try to download the update from this link and install the update manually and check if it helps:

  http://www.Microsoft.com/download/en/default.aspx

  It will be useful.

• I get BSOD after Bios flash, can connect in safe mode.

  Hi all

  I use a laptop HP DV3145 DX, OS is win 7 Home Basic (it came with the laptop).

  A few days ago my screen started to behave erratically. The lower part of the screen is blurred and was unreadable. So I have updated Bios with the HP support assistant.

  After I flashed the bios, I could connect to windows, but every time I log on to the windows it crashed (BSOD) after 30 to 60 seconds.

  I could connect to the computer in safe mode

  That's what I did

  1. connected in safe mode and disabled all startup program (used Msconfig), with the exception of microsoft. This did not help.

  2 activated the player HP_tools disk management and I see the Bios, Bios_new file is there.

  Now, what should be my next step? I want to factory reset as my last option, I have a lot of settings, digital certificates, backups of phone in this machine, those who are important to my work.

  I think to Flash the Bios to the previous version to see if that helps. Now, I don't consider myself a very experienced user. So if anyone can tell me how to Flash the bios to the older version, I'll be grateful.

  I would also like to hear any other suggestions, others may have.

  * PS: I can't update windows drivers (I've updated about a month ago), because the 3 G dongle that I use is not having recognized in safe mode.

  Thanks in advance,

  Magassa

  You should not have flashed the BIOS. Updating the BIOS is not a magic solution to all the problems. You must perform as the first response to a problem with your laptop because it adds an element of risk.

  You should use the diagnoses instead. Press the power button and immediately press the ESC key. In the start menu, choose to press the F2 key to invoke diagnostics. Perform a system test, a test of memory, a hard drive test and a test video.  Let us know what are the results of the diagnostic test. The image is a more recent version that is installed on the hard drive of your laptop, but is still pretty similar.

  

• Cannot get Movie Maker to import an audio file.

  This is the error message I get. The file C:\Users\Holly\Music\iTunes\iTunes Music\Billy Ray Cyrus\Back to Tennessee\12 Butterfly Fly Away (Extended Vers.m4a cannot be imported because the codec required to play the file is not installed on your computer. If you have already tried to download and install the codec, close and restart Windows Movie Maker, and then try to re-import the file.

  Not sure what codec is or how to get so I can import the file.  Any help is appreciated, thanks!

  Best bet would be to convert the M4A file to WMA
  format before you import into Movie Maker.

  There are to many converters available on the net and
  the following freeware is an example...

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Format Factory
  http://www.videohelp.com/tools/Format_Factory
  (the 'direct link' is faster)
  (the file you want to download is: > FFSetup260.zip<>
  (FWIW... installation..., you can uncheck
  ('all' boxes on the last screen)

  First, you will need to decompress the file or just open the
  Drag FFSetup260.exe out of the folder
  and drop it on your desktop. To install left click.

  Next, after the download and installation of Format
  Factory... you can open the program and
  left click on the toolbar, the "Option" button and
  "Select an output folder to" / apply / OK.
  (this is where you find your files after they)
  are converted)

  Drag and drop your M4A clips on the main screen...

  Select "while"WMA"/ OK...

  Click on... Beginning... in the toolbar...

  That should do it...

• URGENT::opening multiple files - i have 3 files in my directory... When I run the code I can open a file and read it... but the while loop get blocked after the first iteration... can someone me help or give some indications

  bbmChatDB of public database;

  public static FileConnection fconnRead = null;
  public static String fileReadData = "";
  public static InputStream is = null;
  data Byte [] = null;
  DataInputStream is = null;

  Here is my code...

  I have 3 files in my directory... When I run the code I can open a file and read it... but the while loop get blocked after the first iteration... can someone me help or give some indications

  try {}

  FileConnection fc = Connector.open("file:///store/home/user/documents/BSM/") (FileConnection); "

  If (fc.exists ()) {}

  Enumeration e = fc.list ();

  While (e.hasMoreElements ()) {}

  System.out.println ("files are:" + (String) e.nextElement ());

  play this file
  StringBuffer stringBuff = new StringBuffer();
  try {}
  System.out.println ("opening file")-;
  System.out.println ("file name is:" + (String) e.nextElement ());
  fconnRead = Connector.open("file:///store/home/user/documents/BSM/(String)e.nextElement(),Connector.READ_WRITE) (FileConnection);
  System.out.println ("data length")-;
  If (fconnRead.exists ()) {}
  is = fconnRead.openDataInputStream ();
  data = IOUtilities.streamToBytes (is);
  Ddd = new String string (data);
  fileReadData = ddd.toString ();
  System.out.println ("length of data:" + fileReadData.length ());
  System.out.println ("read data :" + fileReadData);

  }

  } catch (IOException ee) {}
  ee.printStackTrace ();
  System.out.println ("Exception in the read data :")
  + ee.getMessage ());
  }

  }
  }

  } catch (IOException e) {}

  e.printStackTrace ();
  }

  {Finally

  try {}
  If (is! = null) {}
  is. Close();
  }
  System.out.println ("is closed...");
  } catch (IOException e1) {}

  E1. PrintStackTrace();
  }

  If (fconnRead! = null) {}
  try {}
  fconnRead.close ();
  } catch (Exception e) {}
  System.out.println (try ());
  }

  }

  }

  You can recode this treatment so that it uses only:

  e.nextElement ())

  Once a loop iteration.

  Directly at the start saying something like:

  String fileName = e.nextElement ());

  and use fileName everywhere in your loop.

  Also be aware that printStackTrace() will do nothing in your situation, it only works if you catch Throwable.  So make sure you something output all your catches exception and also have a catch (Throwable t) to catch the things you miss, as follows:

  {} catch (Throwable t)

  t.printStackTrace ();

  System.out.println ("Eception exception:" + t.toString ());

  }

  I think your code is thrown an exception and you don't see it.

• LR 6.2.1 - pictures (previews and views complete) turn into black after the import

  Hello!

  After the import, all the photos of change to black (in library and also to develop)

  I tried to activate / disable the extra graphics processor without success.

  It's the same thing on the 40 d and also on D 70.

  Pictures are saved in RAW, imported they come out of the camera.

  Does anyone have recommendations?

  
  

  

  Thank you!

  Siegi

  Hi Siegi,

  Please follow the steps below:

  1. Disable apply tone controls auto under Lightroom preferences > Presets tab
  2. Restart Lightroom and then import images again.

• First Pro CC crashing after the importation of the media

  I just built my first PC a few weeks ago for the sole purpose of editing with first Pro CC, but every time I have import any media and try to use the view, the program crashes. As long as I do not import, the program does not crash. After I imported, it will be crash without worrying if she still a picture or a video.  I even tried to load the project "Eagles_Doc_Final" which gives to Adobe, as practice and which will crash immediatelysince there is already media imported.

  
  

  I'm about to start an assistant job in editing my work and I need to start training at home with first since I've only used Final Cut in the past.

  My system:

  Trial version of first Pro CC - I really want to buy a subscription, but I can't even make it work.

  Windows 7 Home Premium - make all updates using the Update window.

  Processor - Intel Core i7 4790 K - updated drivers using version 2.0 driver Intel (r) update utility

  Motherboard - GIGABYTE GA-Z97X-UD3H -Bios is version F5. There is an update F6 and F7, but do not know if it would be necessary?

  GPU - no - I wait to see how fast first Pro CC is without using a GPU for acceleration. I read that I have doesn't have a GPU to run the program. Is this correct?

  This is the error I get...

  "Adobe Premiere Pro CC has stopped working"

  Signature of the problem:

  Problem event name: APPCRASH

  Name of the application: Adobe first Pro.exe

  Application version: 8.1.0.81

  Application timestamp: 5426694c

  Fault Module name: devenum.dll

  Fault Module Version: 6.6.7600.16385

  Timestamp of Module error: 4a5bded7

  Exception code: c0000005

  Exception offset: 00000000000016a 0

  OS version: 6.1.7601.2.1.0.768.3

  Locale ID: 1033

  Additional information 1: ec5a

  More information 2: ec5adb2545b190cc19da7bdfa78d5bf1

  3 more information: 52eb

  Additional information 4: 52eb6b5eb5247c23714f771b797ebaa7

  and this is the error in the event viewer application.

  General

  Name of the failing application: Adobe first Pro.exe, version: 8.1.0.81, time stamp: 0x5426694c

  Name of the failed module: devenum.dll, version: 6.6.7600.16385, time stamp: 0x4a5bded7

  Exception code: 0xc0000005

  Offset: 0x00000000000016a0

  ID of the process failed: 0 x 1114

  Start time of application vulnerabilities: 0x01d00202f06d1b2f

  The failing application path: C:\Program Files\Adobe\Adobe Premiere Pro 2014\Adobe first Pro.exe CC

  Path of the failing module: C:\Windows\system32\devenum.dll

  Report ID: 3bf56dba-6df6-11e4-9734-74d435e5c333

  If anyone can help point me in the right direction, I would gladly appreciate it. I don't want to jeopardize anything with this new job because I couldn't get this to work.

  -JR

  Hi jacobrivera68,

  Before importing anything, go to file > project settings > General and change the GPU acceleration for playback (software only) Mercury engine and see if that fixes the problem.

  Thank you

  Regalo

• How to remove photos from my iphone6s after their importation?

  How to remove photos from my iphone6s after their importation?

  Hello KConstant,

  I understand that you're looking to remove photos from your iPhone, after you import the to your Mac. It depends largely on how the images are imported into your Mac.

  If you use iCloud photo library, remove photos from your iPhone, after they have synched to the Photos on your Mac afterwards would remove these photos on your Mac as well, like iCloud photo library is designed to synchronize your iPhone with iCloud and Mac.

  However, if you are importing photos via the USB port of the Photos app, you should be prompted to delete pictures from your device once the import is complete:
  

  Once the import is complete, a message asks if you want to delete or keep the photos on your device. Click on remove items to remove photos or click on keep items to keep them on the device.

  Import photos and videos from your iPhone, iPad or iPod touch
  https://support.Apple.com/en-us/HT201302

  You can also (it not allowed you iCloud photo library on your iPhone), you can use the image capture on your Mac app to delete images from your iPhone. This can also be useful to remove the last images that have already been imported into the Photos on your Mac. Once you have selected the images you want in the Image Capture, you can click on the prohibitive red symbol () to delete the selected items.

  Image capture: transfer images and other elements of your device
  https://support.Apple.com/kb/PH17894

  Concerning