Exit only on one side
My ipod classic only gives me an audio output on one side. I tried several headphones, it's the ipod that does not reach me. Can any ideas on how I fix?
Probably a problem of material with plug headphones. However, you can try to do a Reset (reboot) of iPod
Learn how to reset your iPod - Apple Support
If this does not help, you can try to do a restore, in case the problem is related to the software. This erases the iPod and assigns the default condition "factory". The restore button is on the recapitulation of the iPod settings screen in iTunes. If a restoration is not enough, it is likely to be a hardware problem.
If it's a defective headphone plug, you can get audio out to the dock, with an accessory connector. For example
https://www.Amazon.com/GP/product/B004V9G58M
Tags: iPod
Similar Questions
-
HP Pro 8600 n911a Duplex printing only on one side
Hi Im having proplem is im using the document feeder, try to use the duplex feat. and printing only on one side
IM using paper 8 x 11, I've changed the setting for double-sided copying print settings can somone please help...
Hello honorable31,
Welcome to the Forums of HP Support!
I appreciate that you try to use the double-sided copy document feeder. This model printer the N911a does not support the loading of double-sided documents. The N911g and the n supports the loading of double-sided documents.
So that you can accomplish something similar to come, you will need to place the original on the glass, and then press copy > settings > both sides > 1 heads 2 copy. The printer is paused in the middle of the job to allow you to turn the page on the glass.
I hope this helps.
-
I did a duplex for years, and it's actually one of the features of the printer that I use most often. It's very upsetting to access this feature disappear.
I went to < system="" preferences="" print="" options&supplies="" driver=""> > and titled "HP" accessory of double-sided (duplexer) printing is checked.
I unchecked it and closed, then reopened and checked system preferences box of printing double-sided again. No change.
I have restarted the computer - no change.
Simply the "duplex printing" option does not appear in the print dialog box.
My update of the Apple software is up-to-date.
What should I do?
I found another post on this forum, on scanning not working not not under Snow Leopard ("MacBook Pro Snow Leopard OS HP C4280 not sweeping"). There was a response from a staff member of HP who introduced me to the "washer". I've "cleaned" all HP applications, then re-installed Apple (not HP) and - to my great relief - duplex printing control finally appeared in the print dialog box. I have now printed both sides successfully, and the case is resolved.
I enclose a link to the forum where the useful answer:
-
My C309g is misfeeding (drawing) book only on one side
My C309g blocks - it draws paper only on the right side and feed a piece of paper. I cleaned the rollers, checked for debris, all removable parts off, cleaned and replaced. No change. Suggestions?
There could be a device that has become damaged in the printer. If that were the case, then the printer would be able to draw on the side that are still functioning. You see the gear turns on both sides, if you look at the front as it prints?
There is a document with steps to help fix the issues paper jam found here.
Let me know if it helps.
-
IPSEC only from one side (side with rays)
Hello
I have a star with IPSEC configuration.
If the interesting traffic comes to speak it, the IPSEC Security Association starts and works perfectly. However, once the link is inactive on and there is no traffic, the hub shows this with the command sh its crypto isa
196.47.133.38 185.20.242.61 QM_IDLE 1017 ACTIVE
SH cryp peer ips of his 196.47.133.38 shows nothing at all.
I checked my itinerary and NAT refuse to ensure that is not the issue.
I then checked the crypto ACL when I send the traffic, I see the crypto ACL are increment correctly, but still the SA will not turn on. If I look at ipsec debugging I see nothing.
I use a dynamic with each end map spoke in its own ACL, as follows:
Crypto-map dynamic dynmap 5
defined by peer 111.116.206.92
the transform-set des-transform value
match address 171
Crypto-map dynamic dynmap 10
defined by peer 111.47.132.38
the transform-set des-transform value
match address 172
Crypto-map dynamic dynmap 15
defined by peer 111.174.150.47
the transform-set des-transform value
match address 173
Crypto-map dynamic dynmap 20
defined by peer 111.166.108.250
the transform-set des-transform value
match address 174
Crypto-map dynamic dynmap 100
the transform-set des-transform value
match address 170
c2800nm-adventerprisek9_ivs_li - mz.151 - 4.m6.bin on a 2811
Any ideas?
Thank you
AlanHI Alan,
1. Please remember that when you dynamic user cryptomaps they are most of the time used for the customer site or say remotely, access VPN but can also be used as a site to site vpn when you Wan to restrict this part can initiate the tunnel and another part with dynamic map can never inititte a tunnel , and in this condition your gateways never knows the IP address of the other side clientand so never begin a connection for users of the House or on the Internet in order to build a tunnel. Only home user have to inititite a connection for establishing a tunnel if necessary because he IP could be dynamic and HUB you never know hihc IP they will come as IP might change based on the location or the ISP you connect from.
2. Once you give a dynamic cryptomap on you ASA, you mean you don't know other IP side together like said above, and only when the other side of the peers in this business case will initiate a tunnel and thus no established peer IP no sense in dyanamic crypto card.
3. Once you set a dynamic crypto maps, you still havve to associate it with the crypto statsic map as you cannot associate a dynamic encryption directly map to our part = interface device.
example of
step 1
set the network card crypto as follows:
crypto dynamic-map mymap 1 set transform-set myset crypto dynamic-map mymap 1 set reverse-route
(in line 2 you are instructing your ASA or HUB device that
other client after establishing a client to site tunnel with this machine can insert
a static route dynamically on the rop of the routing table so that the trafic for client can use static route instead of using defaut route and could save tie else it has to traverse through all the router to reach deault route very time communication happens between
the new IP of the cleint machine from HOme iNternet to office firewall /ASAthe so that )step 2
Now call this above dynamic map named mymap into a static crypto map(named dyn-map) as follows
crypto map dyn-map 10 IPSec-isakmp dynamic mymapstep 3
Assign this static crypto map to an interface so as to actually apply dynamic crpto map as told befor eit cant be applied directly:
crypto map dyn-map interface outside
Please share the configuration of HUB and spoke ina separate separate fille and state who is HU and who are spoke 1 spoke 2 spoke 3 and so on.
Hope I could offer you more clear help after that.
best regards
sachin garg
[email protected]/* */ -
110 eprint only prints one side
My desire to 110 will be printed double-sided of the word etc. because it is set as default (both through the "HP printer Assistant" and "devices and printers", but when I send a document or print it ignores the parameter by default and print the front.)
Any ideas on how to assign eprint duplex?
Hi TheWooster,
Welcome to the Forums of HP's Support. I believe that when you send a print job to your Envy 110 use ePrint printer it does not print double-sided.
EPrint currently doesn't support duplex (print on both sides of the page). This information is found in the document Getting Started with ePrint under the FAQ entitled "are there restrictions when you use ePrint?
-
border - only on one side of the pane thr
I want to draw the line at the bottom of the border of a component only
How can I do?With css
-fx-border-color: transparent transparent red transparent;
-
Hello, I have a side border at iteam.
I can't know all the properties in flex / as reference how to apply STROKE only on one side of the element.
would be happy to hear that any information about you.
Thank you
jbeynar
There are different possibilities.
For example, you can try s:Line or s:Path - both would give you a lot of flexibility.
FTQuest
-
iPhone 6, one side of load
my iphone 6 now load only on one side, I tried different usb cable and no luck. After doing several searches online, I replaced the loading port and apparently did not help. phone is out of warranty so the apple support will do nothing.
any thoughts of what could cause this?
I do not understand your question? What do you mean "only the load on one side? Pin male lightweight port is bidirectional, but female lightning port has pins on one side.
-
Only one side of Canon MR-14EX II fires
Hello guys! I'm sure there's a simple solution to my problem, but I can't understand me. I bought the Canon MR - 14EX Macro ring flash II and when I try to take pictures, only one side of the lightning. What I am doing wrong? Thank you!
I have 1 worm and had an even older model, so I suspect setting are similar. Check your manual for the section "Setting the Flash Ratio". You can disable share and else if you want, which may explain your problem. .
-
How to use the print face feature two automatic? I get only one side printed.
I just got a new HP Officejet Pro 8600 and it says it's supposed to automatically print double-sided. When I have a paper face two feed the paper from the upper bin feeder, it takes in and it then prints on one side, then he pulls the book which he just printed in as if he was going to print the second side, but then it ejects just page and does never print the second side. I have an Asus computer running Windows 7, but I'm just trying to make a copy two faces to the right of the printer itself. I went into the settings and there are two options under two back, we say '1-coast face 1 copy Original' and the other choice I have chosen is "1 side 2-sided original copy. Those are the only choices. What I am doing wrong?
The two-sided printing module will print the back automatically when printing. When making copies, it will print the back if you put two (or more) pages in the feeder and select this option to copy 1-face to face 2. This model apparently does not 2 head to head 2 copies, i.e., it doesn't have a mechanism to scan the rear face of load in the ADF.
-
Headset only produce sound from one side
Posted on behalf of a client:
We gathered that the client is running Windows 7 Edition home premium. His speaker system works very well, but he is no longer able to hear the sound from one side of his helmet. We asked that he try it with another game, but the customer doesn't have access to that. Unfortunately the helmet have no guarantee of return is not an option.
If you can think of any errors which could cause which is not the fault of the headphones, please do not hesitate to comment.
Thank you
Social media - Gary W.
#2-the headphones themselves might be damaged. You said that it was not another pair to test with.
I'm sure that the wax will not damage a pair of headphones. I deal with a LOT of people who use their phones and have never heard of that happening.
#3-juste looking at him, you can't tell if residents have suffered damage
I'm guessing that he has never worked?
The only other thing to check would be if there is a specific sound software installed on the system that you can adjust the balance between the edge speakers and external separately.
You can get a cheap set of the Atria or at any dollar store.
-
It is possible to extend the rectangle to the browser only one side?
I would 100% width effect, but only on the left. Is this possible?
@afoxperson
Someone asked a question similar here earlier. There is no method to create a rectangle that extends 100% on one side. The work around I gave was to use a background fill. My answer is in the following link. For your question, you can make a png file with a color on one side and one transparency on the other.
Re: Extend areas of color across the width of the browser
I hope this helps.
David
-
HP Pavilion 15 t: only hear one ear with headphones - and its low general.
After that the last updated Bios, I have lost my sound and had to follow another thread to uninstall and reinstall the drivers. Then I had audio but unacceptably low volumes. I just did a hard reset and I have more volume, but not as much as I think I should be I'm hearing super sensitive. He has blows me out of the room at the top. However, because my computer is relatively new I had not used the helmet until after this problem. I have so no way of knowing if the BIOS change made me only able to hear one side of the helmet. I assumed it was an old set of headphones and bought another pair. This is not the case. I use Windows 8.1 which came installed on my computer not an update I did. All drivers and updates have been checked to ensure they are later. I have audiobeats.
Hi @MichelleS1 ,
If this is not enough, please call our technical support. If you do not live in the United States / Canada region, please click on the linkfor the number of support in your region. They will be happy to help you immediately.
Thank you. -
Satellite M70-394: badge on the cover by pulling upward on one side
Keep pulling upward on one side and me is annoying, especially since it is only a week old. Toshiba will send me a new?
What should I do?
Hello
Usually, if you want to order parts, etc. you should contact Toshiba service partner in your country.
Don t be angry with me, but a badge isn't a reason really to make contact with the service.
I put t know if you will be able to order such badge but you can try it.
Maybe you are looking for
-
iTunes exe file fails to complete the download for windows surface 3 pro 10
When I go to the itunes store and download itunes for windows, download appears to move, but when you are finished, he said that the exe file failed to download. I have 3 pro surface, running windows 10
-
Pavilion 15-n275sr (F8T40EA): 15-n275sr replacement hard drive
Hello world Just bought the laptop (HP Pavilion 15-n275sr) and who seek to replace his drive with an SSD, one HARD original. But do not know how to get access to the hard drive Bay. Someone would be able to provide instructions or video on how do? Th
-
LCR PXI-4072 floating or not floating device
Hi all My question: 4072 LCR is a floating or not floating device (used for the measurement of the capacitance)? Thank you...
-
Pavilion TouchSmart p051us 15: 15-p051us
Spoiler (Highlight to read) I've demoted recently my laptop 15-p051us HP Pavilion TouchSmart Windows 8 for Windows 7 now my USB ports are nothing. There are several elements in the device manager that windows does not find the drivers for. I've demot
-
My 27 a XPS no sound after that he wakes up fashion "Eve". I can restart the computer and the sound is back, but I don't want to have to do it every day. That's why you have the "sleep mode". I have the updated Windows 8.1, but it happened even befor