Expect the icon display number in the table of Boolean

Similar Questions

• How to convert the string with numbers in the table of Boolean 2D

  Hello

  I have input a string with comma separated numbers 1,192 (starting at 1).

  This string must be converted to a table 2D-boolean. Each number that appears should be true, not true rest.

  The 2D table consists of 4 times of 0.47 Boolean values.

  1.48--> [0.47] numbers [0]
  49.96--> [0.47] numbers [1]
  Numbers 97.144--> [0.47] [2]
  145.192--> [0.47] numbers [3]

  If a '1, 49, 97 145' input string put all [0] [0.3] true.

  How can it be easy/fast resolved?

  Thanks for help

  Break the string of numbers in a table of numbers.  (Spreasheet String to Array).

  In a loop For, index with each issue of this table.  Use in the range and Coerce to see if it is in the range of numbers.  (You can put this in a loop For as auto good indexing through the ranges).  If it's in the range, then use subset replace table to activate the corresponding item in a real.  If this is not the case, do nothing.  Maintain the table of Boolean in a shift register.

  Repeat this step for each number in your table.

  (What is a class assignment?)

• How can single checkbox can be selected in the table with Boolean checkboxes?

  I have a table editable ADF where an attribute is a Boolean checkbox... and stores the value with Y or N.
  
  Is there a way where the single checkbox must be selected at time of posting?
  
  For example, in the case its a table of responses to a choice unique to an application of Questionnaire, Question by adding new responses to the table..., the user inserts 3 rows (answers)... then the Boolean checkbox for only one of these 3 rows can be verified.
  
  Thank you
  DJ

  Since you have an attribute that has the "Y" or "n" for each line.
  When the user selects a line, you must deselect the other lines using the value change listener pro-grammatically.
  If the number of rows is large, it could be performance intensive.

  Thank you
  Nini

• A special selection of the table of Boolean

  I use Labview to prepare to use with AB CompactLogix PLC HMI. The problem for me is that I cannot select a bit special (for example to connect with a button, TRUE/FALSE) in an array of Boolean. What I can do is get a particular tag data (integer type Double) plc using OPC and convert these data into array of Boolean. The table can be represented by a series of 32 buttons (I use a card of entry type 32 PLC input fields). But I want to access only the bit 4 of table boolean and toggle an LED based on its output. How to do this? Help, please!

  Leave the data type as a U32 and use the following code:

  

  1 must be of type U32.

  That should do it.

  Play with this idea, also explore GOLD and XOR actions on U32.

  Tone

• How to create a grid with the tables and Boolean values?

  As part of a larger project, I'm trying to create a Subvi, which will allow me to spend a "cursor" in a 3 x 3 matrix.

  It should be 2 Boolean inputs, one for move them down in the table and the other to move them to the right. Once reached the edge of the table, the "cursor" will start back at the beginning.

  I have a vague idea of a table to 2 dimensions with LED. Once 'down' has been selected, the corresponding light to (0,0), light (0.1). Goes the same for the button 'right '. When 'down' is pressed (0.2), the LED should turn off, and LED (0,0) must light up.

  I'm sure it has something to do with the initialization of the tables, but I can't seem to find the right way to do it.

  Any help is much appreciated. Thank you!

  Your array is always empty.  Look at the detailed help for the function page replace table subset.  He says that the function has no effect if the specified index refers to a location outside the table.

  What you see on the Panel is only a view and has nothing to do with what is in the table.

  Lynn

• Is it possible to an array of Boolean function number in a case without the table of Boolean structure?

  Hi guys! In my program, my "robot" (lego mindstorms EV3) has essentially read a code bar and do different things according to the codes bar, he reads and so I have an array of Boolean, and basically I need compare to the other Boolean tables. First of all, I used the "Boolean chart at number" function and then just put it in a structure of the case, but it turns out that the Boolean value to number function is not compatible with my Lego EV3 brick, so I have to find another way to do this. Any ideas?

  Help is appreciated! If you have any questions or if my question is confusing, just ask!

  Thank you.

  
  

• little binary string in array (of TCP read) to the table of Boolean LV (and back)

  I would like to ask what is the easiest way for the next conversion? We use aTCP Read function to read an incoming binary string to a S7 API using LabVIEW. We know that LabVIEW stores a Boolean value to 8 bits. The incoming binary string contains 14 bits (representing 14 indicators of status). What is the best way to convert these values of 14-bit LabVIEW Boolean table?

  In addition, we send a LAbVIEW Boolean table in the PLC data (to write a TCP) string containing status bits.

  Thank you very much!

  Martins wrote:

  This 30 bytes contains some data more, including 14 bit flags (size is 14 bits). Since the PLC cannot put 'together' (16-bit) words at his side before sending data TCP, 14 bits is padded with 2 bits holding no valueable info.

  Then the solution is simple.  Take your 2 bytes and unflatten in a U16.  Then use Boolean table number.

• WebHelp, view a topic that is not present in the table of contents

  Hello

  I'm working on RH8. I use multiple TOC and created a table of contents with only the first 4 chapters. After having generated the WebHelp by using that FAKE, even if I look for a subject that did not exist in the table of contents, I can see the help.

  Ideally, if the topic is not added to the table of contents, should not be displayed even if someone searches for it.

  Please help me with this.

  Looks like you expect the table of contents to control what is in the construction and it's not the way it works. It is simply the pointer on key issues, which may need to support the topics where you wouldn't wish that the user to start and that might clutter up the table of contents.

  What you see, it's the way it is supposed to work and how a HAT I've seen. The table of contents indicates what you want to highlight, the search finds all that is in the build.

  You can use exclude research in properties, introduced in RH8. In this way the subject is in the build-up but not searchable.

  If you don't want certain topics, use TCC to exclude.

  See www.grainge.org for creating tips and RoboHelp

• Number of 1s or 0s in a table of Boolean

  How to find the number of 1s or 0s to an array of Boolean. for example in 101011, ago four 1s and 0 two s.

  Hello

  Thanks to you all.

  I just got an idea and his work. It's better, I want to share with you.

  1. Convert the table of Boolean 0, 1 (available in boolean labiew)
  2. Just to summarize these 0, 1, using arithmetic sum
  3. Comapre the sum with half of the number of channels.
  4. If the sum is greater than or equal to, its ok

  Thank you.

• Failure of Options when you click the Dock icon to include 'Desktop in the display (number).

  Failure of Options when you click the Dock icon to include 'Desktop in the display (number).

  I use an iMac 24 "mid-2007. The help documentation tells me how to assign an application to a space is to use this Option. But it does not, while the other three are. Is this an error or something that can be explained? Could there be a work around? My OS is El Capitan.

  Hi peterwhi,

  I understand you are trying to set an application to open its windows on a particular space. To do this, move to the space that you want to use for the desired application, and then choose 'The Office' in the list of options you mentioned see (under Options).

  OS X El Capitan: working in multiple spaces
  https://support.Apple.com/kb/PH21872

  The option that you describe as missing is displayed only if you have connected an additional external display to your iMac and would set the app to open on the iMac screen or the external display.

  Office on the screen [number]: the application opens in the current space on a specific screen (if more than one display is available).

  Sincerely

• BI Publisher - how to display the number of lines displayed at the bottom of the table on each page

  Hello

  We are the conversion reports Actuate BEEP and not able to understand how to view "Accum.Total = < n >" at the bottom of each page. In the attached report to operate it, "Accum.Total = < n >" must be displayed at the bottom of each page where < n > is the number of lines displayed on the current page and previous page.
  
  For example, if there are 10 rows in the result set, if the 1st page displays 4 rows, 2nd page displays 3 rows and 3rd page is 3 lines and then Accum.Total = 4 on page 1, Accum.Total = 7 on page 2 and Accum.Total = 10 on page 3.
  
  Note that we use the property table "allow the lines to break Pages = False" as we do not want a specific line can be split across pages.
  
  I enclose a sample of report actuate, rtf, BEEP and XML report for testing file.
  
  Approach used so far-
  
  1 > I tried to put the counter in the footer, but it seems that only the fields that come directly from the IC can be used on the header/footer. No matter what form text field or variables defined in the report.
  
  2 > I used approach given in the link below. Using this approach, I am able to view a coded value hard at the bottom of every page (just below the table) but his does not work for the variable (in my case the counter c1).
  
  https://blogs.oracle.com/xmlpublisher/entry/continued
  
  3 > on Google, I found a few articles on the page break conditionally as display only certain numbers on a page or the page by section break but in our case, its dynamics and its number of lines to display on a page is driven by data, so I could not think of a certain condition to use in "Condition." ": If" for use as a page break.
  
  Thank you

  Richa
  

  Watch see the-Report

  http://docs.Oracle.com/CD/E28280_01/bi.1111/e22254/create_rtf_tmpl.htm#do_bf_cf

  Download the https://blogs.oracle.com/xmlpublisher/entry/continued sample

  Add

  <>

  name = "contd_footer".

  format = "99G999G999" / >

  After the field "Footer."

  If need to use a footer to display the meter then and sous-modèle with code above and call it in footer

• 1013 JDev how 2 display number on a specific attribute on the output text table?

  Page 1: I created a form of parameter with 7 top search criteria fields and table of results of search or a Table read-only ADF downstairs. The setting is based on the application of top link where each parameter is as the corresponding field in a table and works very well!
  
  For Page 2: I want the page looking at the same research, same parameter table of search results albums and even down with the addition of display also count on a particular area so that when someone enters data into the fields of setting up, he would always check the table and show the results of all fields, but in the last column do a count on this field (totally separate from the default number of records to search entire JDEV).
  
  Is it possible to create as a count or count (*) function at the level of the line of text out? I tried to create a view based on a Select sql statement a, b, c, d, count (e) table, group by a, b, c, d, e and when I dragg this object that contains this sql statement from the data control panel, it gives me the correct regulation of all areas, including the last column to display the number of records for this field , but together does never change based on what has been entered in the parameter, it is as if he is not yet connected to it. For ex: I want to display the number of all students within the setting of the East region, on the contrary it shows total number for all regions, not specific to East.

  Hello:

  I worked on a very simple application form ADF search against table Scott.emp in the Oracle database.
  Now I see what you mean. The idea is probably you shouldn't directly drag and drop control of your data: directly in your jspx as «ADF search form» Here are the steps:
  (1) create your entity object, the view object and I'm in the model layer; (You have already done this, you do not have entity and your view may come of TopLink request;)
  2) double-click the View object in your project of "model"; Add a connection variable: type Bind_deptno Number. It's read in a number of dept on the search engine;
  (3) change the SQL statement of the Emp View object on the same place as 2); WHERE Emp.Deptno = NVL (: Bind_deptno, Emp.Deptno) this indicates ADF if the binding variable is bound to a value
  then use this value, or if it is null, just ignore it. That's the tricky part;
  (4) create a new JSF called "Search.jsp', which will be the search engine;
  (5) from App Module, select EmpView1 (EmpView is updatable, EmpView1 is read-only, but it is not serious on the research plan), drag and drop the EmpView1 on your
  Search.jsp as an array of the ADF (not a search ADF form). This ADF table then displays the result of the research;
  (6) of the control Module of the App, go to EmpView1 data, drag and drop a "ExecuteWithParams" on your search engine like settings-> parameter ADF
  Form, this will tell ADF you want to set the variable binding as an executable looking for shape parameter.
  That's all! and you're good to go. Do the same for the other variable binding (you have 7 search criteria, so you have set 7 bind variable by using the same logic here.
  Good luck and don't forget to mark my answer as "correct" it to make me a few partitions.

  Best regards
  Alex IBE

• Display the option button if the number of rows in the table is equal to 1

  I'm having issues there buy maybe a simple script out there.

  I have a table which can have up to four lines. If the table contains only one row, an option button can be clicked to change the format/entry of cells in this row. I have to hide this box of a user option, if they added more of a line to the table and make it available again if they reduce the number of lines to one.

  I have everything else works well (radio buttons change line format, add/delete rows in the table using buttons, number of rows in the first column)

  Anyone have any ideas?

  See you soon

  Bobby

  You can place it in the code that adds more lines when running... If you have questions send the fomr to [email protected] so I can check it out...

  Thank you

  Srini

• Display data in a table after the analog acquisition

  Hello

  I am almost 12 analog channels data acquisition using a single task at the frequency of 100 Hz and try to display it in a table. I've renamed all channels according to their functions and also assigned a number of material. But the problem I encounter is that am not able to find out what data comes from a single channel. The graph should look like similar to MAX table with an additional column to display the number of material as well, and I am attaching the picture of it. From now on, I tried to show all channels, number of material and the values acquired successively in three separate columns. Although it seems very well, I would like to know if there is an option to find out where a particular value channel was acquired in a task with a number of channels?

  The shift register for the while loop where you collect your data should be a 2D array.  Then each colum is assigned to a channel.

• number of rows in the table

  Hi master,

  I have a requirement. During the passage of a table, I need to get the number of rows in this table. Sometimes, when I spend 2 or more table names, I need to get the same count of result of lines. I got the below function. but it shows all the rows in the table. I want pariticular tabels only. How I can I get it.

  Select table_name, num_rows from all_tables where table_name in ('EMP', 'Department');  I tried.  I need to a procedure or function. who will pass the name of the table as a parameter and 1 or more than the name of a table if I pass, I need to display information from table name and number of lines.

  CREATE OR REPLACE

  TYPE t1_obj AS OBJECT)

  table-name VARCHAR2 (30),

  CNT NUMBER

  )

  /

  CREATE OR REPLACE

  TYPE t1_obj_tbl AS THE t1_obj TABLE

  /

  CREATE OR REPLACE

  FUNCTION (f1)

  p_schema_name VARCHAR2

  )

  RETURN t1_obj_tbl

  PIPELINED

  IS

  v_retval t1_obj: = t1_obj (null, null);

  BEGIN

  FOR v_rec IN (SELECT table_name FROM dba_tables where owner = upper (p_schema_name) and nvl (iot_type, 'X')! = "IOT_OVERFLOW") LOOP

  v_retval.table_name: = v_rec.table_name;

  RUN IMMEDIATELY "SELECT COUNT (*) FROM" | p_schema_name | '.' || v_rec.table_name

  IN v_retval.cnt;

  PIPE ROW (v_retval);

  END LOOP;

  RETURN;

  END;

  Select * from table (f1 ('scott'));

  The above function returns information from the table in SCOTT scheama. I need only perticular table info.

  Please notify.

  AR.

  Hi Sven,

  Front end people ask me the requirement. They wanted a proc or function as I want.

  Please help me.

  Concerning

  AR