Expect ultrasound with LVLM on EV3 does not wait

Similar Questions

• Portege A600-138 with Vista 32 bit does not see the computers in the Group Win XP network

  Hello

  My Toshiba Portege A600-138 with Vista Business 32 does not see the computers in the workgroup.
  In our office, the computers are all equipped with Windows XP.

  When I connect my laptop to the Local network, I don't see any neighboring computers in Network Explorer.
  I spent 1 hour and 40 minutes to talk to a specialist Service of Support from Microsoft, and the only way to have access to local machines, we found it had to enter the IP of the computer directly into the computer browser path field.

  I hope you understand what I mean.

  The man said that he had no this problem with non - OEM Windows Vista versions.
  He meant that the problem was with the oem versions of Vista preinstalled on laptops only.
  He said that probably the sellers - in my particular case Toshiba - supplied their notebooks with VIsta oem images that were somehow corrupt.

  Does anyone have an idea of the cause of this problem?

  > The man said that he had no this problem with non - OEM Windows Vista versions.
  > It meant that the problem was with the oem versions of Vista preinstalled on laptops only.

  That's nonsense for me
  The Vista OS preinstalled Toshiba which is same BONE as full Vista disc from Microsoft.
  There is only one difference; Toshiba laptops are preinstalled with Toshiba and pilots tools and drivers and tools are part of the Toshiba recovery image that contains Vista, driver and tools

  Check this box:
  http://www.Computerworld.com/s/article/9019179/Teach_XP_and_Vista_to_play_nice_on_networks?taxono myId = 16 & pageNumber = 1

  You will find information that a problem has to do with the new Windows Vista network map.
  Windows Vista uses a new Protocol (Link Layer Topology Discovery).
  LLTD is integrated with Windows Vista, this is why they appear correctly in the network map.
  But the problem is that LLTD is not integrated with Windows XP, which is why they do not appear correctly.

  But you can fix the problem by downloading and installing the layer topology discovery responder.
  Install it and your PC Windows XP will appear on the network map.

• 6 iPhone with iOS 9.2 does not and freezing when I try to turn on + WiFi freezes

  6 iPhone with iOS 9.2 does not and freezing when I try to turn on + WiFi freezes cannot allow him. (When I get to start the Iphone by pluging it to Itunes)

  I've done a new install and reset the network settings.

  But always the same questions

  Thanks a lot for your help

  I have the same questions and more from Friday December 11 when I've upgraded to iOS 9.2.

  Device: iPhone 5 s

  Problems:

  -Screen freezes randomly reboot * required (sometimes restart by the camera itself)

  -Sometimes device reacts very slowly on the command (or even then restarts)

  -For the most part within the first hour when used, sometimes immediately (after restart)

  -Cannot slide or apps to react when I touch

  -AssitiveTouch on, keep available however to move and opening, but no order accepted when the screen is in gel

  Resolution of problems so far:

  -Reset all settings (no result)

  -Backup on iTunes (11 dec)

  -Erase content and settings and restore the backup to iCloud (10 Dec *) (no result)

  -Erase content and settings and restore the backup of iTunes (11 dec) (no result)

  -Tried with the new iPhone camera 6 and restore backup icloud (unsuccessfully; restore hangs at "1 minute remaining")

  -Tried with the new iPhone camera 6 and restore backup of iTunes (no result: same freezing questions reappear)

  Conclusion date: is not a hardware problem (device), but one software: combination of the configuration (such as backup) and the new iOS 9.2.

  By the way: I guess that not possible to restore 9.1 on the device.

  The new iPhone 6 initially contained iOS 9.1, but then did not 'see' backups, because they were made from a 9.2 iOS device.

  So I had to first install the iPhone 6 as a new iPhone, upgrade to iOS 9.2 and then I was able to reset and restore the backup (with no good result, as described above).

  *) restarts: hold Home-button on/off-button simultaneously for 10 seconds

  backup *) in the form of clouds 10 Dec worked without problem on iOS 9.1.

  I will continue to investigate on removing the apps installed a year or two, see if that generates the result.

• Gesture with one finger touchmouse does not respond correctly

  My fingers touchmouse gestures work ok, except for the gesture with one finger :( It does not at all on the desktop. It scrolls only of up and down a Web page, or when I'm in a window. It does not navigate to other directions with one finger.
  A quick response would be appreciated.

  Hi Teri,

  What operating system is installed on the computer?

  I suggest you try the steps from the following link:

  Mouse, touchpad and keyboard with Windows problems
  http://Windows.Microsoft.com/en-us/Windows/help/Mouse-touchpad-and-keyboard-problems-in-Windows

  Keep us updated with the results once you try the steps above.

• There is an error with my computer, it does not connect with my router. It works with my usb 3g modem, but not with my router. My router works with other devices.

  There is an error with my computer, it does not connect with my router. It works with my usb 3g modem, but not with my router. My router works with other devices.
  I tried to connect my xbox to my computer to xbox live via the 3g router, but I was unable to. According to me, there is something wrong with the network card, since neither the wifi (wlan?) nor the lan connection seem to work.
  I harnessed connected my iPod, Xbox 360 and Nintendo DS for her, but not my computer. Please help me, what wrong with my computer?

  original title: problem with the map?

  Hi GustavTak,

  1. you have made no changes to the computer before the broadcast took place?
  2. do you get an error message?

  Try the steps from the following link:

  Windows wireless and wired network connection problems
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Additional information:
  Network connection problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-connection-problems

  Set up a wireless router
  http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-a-wireless-router

• I keep having problems with my server DNS does not. Computer Blu - Ray player and wireless both have problems with the connection.

  I have problems with the server DNS does not.  I have been using my wireless on my computer and watching netflix on my Blu - ray player at the same time.  The Blu - Ray player froze and wouldn't connect.  At first, I thought that the network has not been configured correctly, but it worked not five minutes before.  I tried many things and I realized it was that my DNS server does not.  Does anyone have any suggestions?

  original title: DNS server does not

  Hi Dwright,

  1. have you made changes on the computer recently?
  2. not the problem only occurs when you watch netflix on Blu - Ray player?

  Method 1
  I suggest you try the steps from the following link to fix the server DNS does not problem.
  a. click on start and then Control Panel.
  b. go to the networking and sharing Center and then click on change adapter settings.
  c. right-click on connection to the Local network and select Properties.
  d. Select Internet Protocol Version 6, and then click Properties.
  e. Select obtain DNS server automatically an address and press Ok.
  f. Select obtain IP address automatically.
  g. Repeat steps for Internet Protocol version 4 as well.

  Method 2
  Try resetting Winsock2 from the following link:

  How to determine and to recover from Winsock2 corruption in Windows Server 2003, Windows XP and Windows Vista (applies to Windows 7)
  http://support.Microsoft.com/kb/811259

  Method 3
  Reset TCP\IP.
  How to reset the Internet Protocol (TCP/IP) (applies to Windows 7)
  http://support.Microsoft.com/kb/299357

  Additional information:
  Windows wireless and wired network connection problems
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

• What is wrong with this sequence, it does not work when, after 3 inserts, I add a new record with the trigger it gives an error.

  Mr President.

  What is wrong with this sequence, it does not work when, after 3 inserts, I add a new record with the trigger it gives an error.

  --SL_CUSTOMERS table data
  
  
  INSERT INTO SL_CUSTOMERS VALUES(1,'Kamrul Hasan',NULL,NULL,'Moghbazar', 'Dhaka','0456789123',NULL,NULL,NULL,'Y',NULL);
  INSERT INTO SL_CUSTOMERS VALUES(2,'Rabiul Alam',NULL,NULL,'Motijheel', 'Dhaka','0567891234',NULL,NULL,NULL,'Y',NULL);
  INSERT INTO SL_CUSTOMERS VALUES(3,'Shahed Hasan',NULL,NULL,'2-G/1,2-2,Mirpur', 'Dhaka','0678912345',NULL,NULL,NULL,'Y',NULL);
  
  
  
  

  CREATE SEQUENCE  "ALIZA"."SL_CUSTOMERS_SEQ"  MINVALUE 1 MAXVALUE 9999999999999999999999999999 INCREMENT BY 1 START WITH 1 NOCACHE NOORDER  NOCYCLE ;
  
  
  CREATE OR REPLACE TRIGGER SL_CUSTOMERS_TRG 
  BEFORE INSERT ON "ALIZA"."SL_CUSTOMERS"   
  FOR EACH ROW   
  BEGIN   
  IF :NEW.CUSTOMER_ID IS NULL OR :NEW.CUSTOMER_ID < 0 THEN  
    SELECT SL_CUSTOMERS_SEQ.nextval   
      INTO :NEW.CUSTOMER_ID  
      FROM DUAL;   
    END IF;   
  END;   
  /
  
  
  
  

  When I try to insert several records with the seq.nextval it gives error

  violation of primary key.

  INSERT INTO "ALIZA"."SL_CUSTOMERS" (CUSTOMER_NAME) VALUES ('sdfsd')
  ORA-00001: unique constraint (ALIZA.SL_CUSTOMERS_PK) violated
  ORA-06512: at line 1
  
  
  
  
  One error saving changes to table "ALIZA"."SL_CUSTOMERS":
  Row 4: ORA-00001: unique constraint (ALIZA.SL_CUSTOMERS_PK) violated
  ORA-06512: at line 1
  
  
  
  
  
  
  
  

  Concerning

  Mr President.

  I find the solution by creating a function before the triiger

  as below

  CREATE SEQUENCE  "ALIZA"."SL_CUSTOMERS_SEQ"  MINVALUE 1 MAXVALUE 9999999999999999999999999999 INCREMENT BY 1 START WITH 1 NOCACHE NOORDER  NOCYCLE ;
  
  CREATE OR REPLACE FUNCTION get_SL_CUSTOMERS_vId RETURN VARCHAR2 AS
  BEGIN
     RETURN SL_CUSTOMERS_SEQ.NEXTVAL;
  
  END;
  /
  
  CREATE OR REPLACE TRIGGER SL_CUSTOMERS_TRG
  BEFORE INSERT ON "ALIZA"."SL_CUSTOMERS"
  FOR EACH ROW
  DECLARE
  dummy VARCHAR2(200);
  BEGIN
    dummy := get_SL_CUSTOMERS_vId();
    :NEW.CUSTOMER_ID := dummy;
  END;
  /  
  

  It works very well

  Thank you all for the suggestions.

  Concerning

• I can't install Acrobat Reader. He said that I have a version updated a request to complete (no choice). I don't have any installed version. I'm looking and I can't find no, and if I ask 'open with' PDF documents it does not show an Acrobat

  I can't install Acrobat Reader. He said that I have a version updated a request to complete (no choice). I don't have any installed version. I'm looking and I can't find no, and if I ask 'open with' PDF documents it does not show an Acrobat

  If you're running Windows (which we don't know), you can try to use this tool first remove all traces of your computer:

  http://labs.Adobe.com/downloads/acrobatcleaner.html

  Then you can download the complete player offline installer from

  http://get.Adobe.com/reader/Enterprise/

  After downloading, restart your computer and run the Setup program before anything else.

• I look integrated in the block of the legend of slide show, a widget like "Accordion" for, with one click, or by the way with the mouse, open a new caption for each photo. I tried with 'Accordion' Muse, it does not work. I haven't tried to copy and paste,

  Issue.

  I look integrated in the block of the legend of slide show, a widget like "Accordion" for, with one click, or by the way with the mouse, open a new caption for each photo. I tried with 'Accordion' Muse, it does not work. I haven't tried to copy and paste, but no result. The widget disappear into the legend of block. disappear. Do you have a solution?

  Thank you

  Loïc

  Accordion Panel tabs should, with click and open the container.

  Please provide the url of the site where it does not, also if you can provide an example where we can see the exact action, then it would help us.

  Thank you

  Sanjit

• I don't want to start a discussion! I just want to help with a product that does not work!

  I don't want to start a discussion! I just want to help with a product that does not work!

  http://helpx.Adobe.com/x-productkb/policy-pricing/activation-network-issues.html

  Mylenium

• HP laserjet 1022 does not wait for the user to turn the pages when printing double-sided

  My Hp laserjet 1022 printer working properly for years.

  So far, when he executed more paper he tried a couple of times to get more paper and then stops with a message on the PC it is out of paper.

  Very annoyingly, this has changed recently, now when it is out of paper, he tries a couple of times to get more paper and watch the message on the PC, saying that it is paper and then again, try a couple of times to get more paper and again shows the same message on the PC and him back... This continues to go on and on.

  It's especially annoying when trying to print double-sided. Before he used to stop and ask you to turn the pages to print the other side. Now the previous behavior overrides the break to turn the pages and keeps it will try to get more paper. As now, it does not wait for the user to turn the pages, in general it spoils the impression out by getting another paper that is not what I wanted, he drives me crazy! It's really hard to print anything double face now.

  All solutions?

  Operating system is Windows 7, I just downloaded and installed the latest driver for this printer "2013-01-09, Version: 20120918" and I get the same behavior. In the properties of the printer that I put some State Messages to Off and at least I don't get the full windows message screen poping up every time the printer is trying again to get more paper. I have not found all the other parameters that may affect this behavior.

  Help!

  Hello

  I solved the problem! I found the original CD for the printer. I uninstall the current driver and then install CD and now when the printer is out of paper trying to get paper a couple of times and then stops, as it used to be.

  Thanks for your help.

  Martin

• Delete record behavior does not wait for the "submit" button

  I have master / detail pages as a whole.  Of all the detail, there are links to delete or update a record.  When I click the link to delete the folder, it goes to the confirmation page with the correct record.  Now, when I add the behavior delete record server and a button "submit", it is what is happening.  As soon as I click on the link to access the Delete Confirm page, deletes the record and the page redirects to the page that I put in the server behavior.  It does not display the confirmation page and does not wait for me to hit the button confirm.  The page runs and removes the page from the database.

  How can I get to wait until I hit the submit button?

  You must surround your request deletion with an "If" statement seeking a confirmation variable, then when the user clicks the confirmation link, you can pass the necessary variable and the ID of the record that the delete request is pregnant.

  As an alternative, you can use a JS alert fuction to ask if they are sure they want to delete the folder, and then delet allwo runs after confirmation to the user. To do this, you can use code like this...

  
  onclick = "return ('are you SURE you want to DELETE this record? confirm")">

  --
  Lawrence * Adobe Community Expert *.
  www.Cartweaver.com
  All Shopping Cart Application for
  Dreamweaver, available in ASP, PHP and CF
  www.twitter.com/LawrenceCramer

• HumanTaskActivity does not wait for the user to act

  Hello
  
  Proc2 I stole the activity of each of the branches, I invoke another process called PROC3 from the e-mail as PROC3 entry.
  
  PROC3 contains only HumanTaskActivity.
  
  By the time wherever I start my PROC2, he calls PROC3, but in HumanTaskActivity PROC3 does not wait for the response, it gets full without sending email.
  
  Any help would be very handful for me.
  
  Thank you
  VIKI

  VIKI,

  You can run just PROC3? It work? Except that there is a problem with the assignment of the user / group in this task? Users of human tasks has the correct permissions / roles?

  Marc

• Bluetooth: Application does not wait for investigation

  Good afternoon

  For almost a week already had a problem, which already has a load of messages on the forum, after research and do the trial & error for three days, I hope someone can relate to no doubt tiny stupid error I have and I just can't.

  The goal is simple: Once loaded, begins to discover Bluetooth lights nearby.

  Problem: The tags are located and what is work decently, but he does not obey the synchronization (wait/notify).

  I tried several things, but I keep hitting the same problem. It does not take into account my lock and did the survey on the bottom, and only after main thread finished drawing.

  To facilitate the access to tests, I've isolated the problem section.

  // Does Not wait for Inquiry to end!
  

  The solutions tried so far:

  -Temporary "fix" sleep vs sync

  S ' object in static final or none and that any combination of the three options.

  -Develop a 9700 OS 6 SDK: 6.0.0.30 Plugin Java: 1.3.0

  import java.util.Vector;
  
  import javax.bluetooth.BluetoothStateException;
  import javax.bluetooth.DiscoveryAgent;
  import javax.bluetooth.LocalDevice;
  
  import net.rim.device.api.ui.component.AutoTextEditField;
  import net.rim.device.api.ui.component.Dialog;
  import net.rim.device.api.ui.container.MainScreen;
  
  public class MyScreen extends MainScreen
  {
      Vector tags = new Vector();
      private Object lock=new Object();
  
      public MyScreen() throws BluetoothStateException
      {
          super();
          setTitle("Bluetooth Discover");
          Listener myDiscoveryListener = new Listener();
          try
          {
             LocalDevice localDevice = LocalDevice.getLocalDevice();
  
             DiscoveryAgent discoveryAgent = localDevice.getDiscoveryAgent();
  
             discoveryAgent.startInquiry(DiscoveryAgent.GIAC, myDiscoveryListener);
          }
          catch(BluetoothStateException bse)
          {
              Dialog.alert("BluetoothStateException exception: "+bse.toString());
          }
          // Does Not wait for Inquiry to end!
          try
          {
              synchronized(lock)
              {
                  lock.wait();
              }
          } catch (Exception e) {}
          Vector tags = myDiscoveryListener.mac;
          String text="";
          for (int i=0; i
  
  import java.util.Vector;
  
  import javax.bluetooth.DeviceClass;
  import javax.bluetooth.DiscoveryListener;
  import javax.bluetooth.RemoteDevice;
  import javax.bluetooth.ServiceRecord;
  
  public class Listener extends Thread implements DiscoveryListener
  {
      Vector mac = new Vector();
      private Object lock=new Object();
  
      public Listener()
      {
      }
  
      public void deviceDiscovered(RemoteDevice remoteDevice, DeviceClass cod)
      {
          try
          {
              System.out.println("Device: " + remoteDevice.getBluetoothAddress());
          } catch(Exception e){ } finally{ mac.addElement(remoteDevice.getBluetoothAddress().toString()); }
      }
  
      public void inquiryCompleted(int discType)
      {
          if (mac.size() > 0)
          {
              try
              {
                  lock.notifyAll();
              } catch (Exception e){}
          }
      }
  
      public void servicesDiscovered(int transID, ServiceRecord[] servRecord)
      {
      }
  
      public void serviceSearchCompleted(int transID, int respCode)
      {
      }
  }
  
  Thanks in advance for all the help possible and yes I am services that support are not being implemented are not necessary for the current problem that prevents me to further develop my application.
  PF
  			 
  I have the same problem before and still can't fix. I don't know, but it seems that there is a problem in the 9700 OS.
  http://supportforums.BlackBerry.com/T5/Java-development/BB-Bluetooth-connection-cannot-act-as-client...
  In any case please inform me if there is good new ants on this issue.
  Thanks in advance.
  Best regards
  Albert Siu
  		   

• SRM does not wait for the guests of the DPM enabled

  Hello

  We are testing our environment vsphere 5/SRM and essentially 5, everything goes very well except for wake up initiated by the SRM to the DPM active guests.

  --------------------------------

  The SRM 5.0 doco States:

  SRM temporarily disables DPM for the cluster, and ensures that all guests there are lit before recovery begins. After the recovery or the test is completed, SRM reactive DPM for the cluster, but it hosts are found in the current state of execution while DPM is able to feed them downwards as needed.

  --------------------------------

  The question that we see is that SRM send indeed wake up for guests in mode standby and milestone of recovery as a success. The problem is that SRM does not wait until the guests are completely turned on before before feeding on the VMs. The day before hosts to wake the system correctly storage access newly presented no problem. The problem is that the bubbles to test network is not created on the hosts of the day before and no VMs are assigned to these hosts during the entire test.

  That said, I checked the advanced settings and I cannot find a setting that will force SRM to wait for the standby hosts to be fully integrated in the cluster before you perform additional steps.

  Everyone knows this behavior? Am I missing a setting somwhere? My fear is that this behavior will happen during a real failover and potentially cause problems.

  Thank you for your time,

  Smokey

  Hello

  This should not happen.

  Can you please open a SR, download bundle Journal, engineers will be able to understand what is happening?

  Once you open a case, display the number of SR.

  Michael.