Expected .dbf files copied from old house Oracle Oracle home again after an upgrade out of place?

Similar Questions

• Reset used, bad results. ALL copied from old profile to the new file, & FF file now takes 100% of CPU. I can take off safely profile folder?

  Audio delayed or does not stop when you run a video. So I used RESET. Lost bookmarks & homepage & ADBLOCK and who knows what else. So I just copied ALL the files from the old profile on my desk in the new found under troubleshooting. Put everything back, but now FF use 100% CPU when running. I'm sure that I messed up by copying everything but little, I freaked out when I saw that I had lost so much. What can delete the current profile safely folder? (Yes, I feel like a fool and I regret just is go with my screws upward, but I really need help with this).

  I didn't know how to find your answer to what earlier. In the meantime, I used back once again, & found printed the info that I need to copy ONLY the files that I need between previous & new. (Not done yet). But this time, my favorites return. (YAY! "I have a ton of bookmarks). The CPU usage is now reasonable.

  Thank you all for your answers!

• Cannot use the files copied from Windows 8/7/Vista in windows XP.

  Always there are people who use Windows Xp, the problem is that when I copy the files in my USB and use it in my friends house, then Windows XP said 'pen drive not formatted ".

  Always there are people who use Windows Xp, the problem is that when I copy the files in my USB and use it in my friends house, then Windows XP said 'pen drive not formatted ".

  How is the "pen drive" formatted - with what the specific OS file system?
   
  This is more likely to be a file system - do not operating system (although related, not as much as you might think)-problem.  Another possibility is a problem hardware or bad driver on the machine Windows XP itself.  It could also be, although rare, an incompatible 'USB key '.
   
  What is the 'pen drive' is formatted with the file system is essentially - the first question to ask.  Then - if I were you - I everything on the 'pen drive' copy on a computer which can be read - if committed to the machine more common denominator (in this case the Windows XP machine) you will use and FORMAT this 'pen drive' using this machine.  One of the few possible things will happen no doubt...

  (1) you'll find you format it with a version of NTFS that will work in all areas - all the machines that you can use with Windows XP or more on them.  Then this problem will disappear.

  (2) you will find there * is * something wrong with the Windows XP specific in question and this machine is not a problem easily solved this and your "pen drive" probably will work on someone elses machine Windows XP very well as it existed before.

  (3) you will end up with a FAT32 formatted "pen drive" that should work on most any system - as long as you don't need to transfer * really * large individual files.

• Cannot create a virtual machine with a vmdk file copied from another location, please find the attached error

  Hi all

  I copied a file from one place vmdk and try to make a new virtual machine with this vmdk file. But when I turn on after the creation of vm error is coming. Error in the text and the image below

  Power on the virtual machine: cannot open scsi0:0 disc: disc not supported or not valid type 7. Ensure that the disk has been imported.

  See the error of the stack for more details on the cause of this problem.

  Time: 31/03/2015-14:40:05

  Target: DBServer

  vCenter Server: vcsa

  Error stack

  An error was received from the ESX host turning on DBServer VM.

  Unable to start the virtual machine.

  Power DevicePowerOn module has failed.

  Unable to create the virtual SCSI device for scsi0:0, ' / vmfs/volumes/543d140b-feb33d52-7640-90b11c9796c3/vmdk/kapuatdb.vmdk'

  Could not open scsi0:0 disc: disc not supported or not valid type 7. Ensure that the disk has been imported.

  This error message generally if the hard files have been copied hosted as VMware Workstation product, which uses a format of sparse file that is not supported on an ESXi host. Instead of the hard copy, you can use VMware Converter, or - if you prefer - you can convert the hard using vmware-vdiskmanager (before transfer) or vmkfstools (after downloading). I deal to use vmkfstools you will need to load the mutliextent module (see for example "Clone or migration operations involving virtual discs non-VMFS on ESXi fail with an error" vSphere 5.1 Release Notes)

  André

• Trying to mount vmdk file copied from running server

  Hello.

  I can't mount a vmdk file in windows.

  I used the backup software Trilead VM Explorer and made a backup of the original vmdk file. Now, I want just a document from this image file, and I'm not able to mount the file using VMware Mount. See the following example of me trying to get the file. It is a copy of the original vmdk file and it is not in use, but the program it is. My guess is that when the backup is taken, the image is written as its use in and im going to this topic in the wrong way.

  C:\Program Files\VMware DiskMount Utility > vmware-mount G: "F:\Gekab-flat.vmdk."

  Impossible to mount the virtual drive. The disk can be used by a virtual machine or mounted under a different drive letter. If this is not the case, check that the disc is a virtual disk file, and the file of the disk was not courrupted.

  Is there a work around for this problem?

  Kind regards

  Tommy

  Hmm - the file seems ok for me.
  In any case – move the vmsd file in a different directory and add the file I've attached in the same directory as the flat.vmdk
  Then try to get that one.

  If it still does not - whose architecture do you use? 64 bit or 32 bit?
  try to mount with winimage - or in the case where you are using a 32-bit host try vdk.exe - see
  http://FAQ.sanbarrow.com/index.php?action=Artikel&cat=47&ID=119&artlang=en

• transfer of files, etc. from old pc does not work with window vista laptop

  This question is a bit out of my reach. my pc ran 10 windows and crashed after many virus problems. I have a Toshiba laptop like Windows vista and would like to transfer all the nonworking laptop PC. is this possible at all? If Yes please explain in words simple-am not a techie. Thank you.

  If its virus issues, & the pc does not start, try to start the pc in safe mode, select normal mode, enter windows

  like you administrator. Once, you may / can collect data/folders/files in a single folder, once through, move

  folder on a CD-ROM or a dvd.

  Also, on the old desktop win 10, try the removal running microsoft malicuos/malware software, download utility

  to a pc running, move it to a cd, download the version win10, only here.

  https://TechNet.Microsoft.com/en-us/security/jj657526

  He can show that there & maybe win 10, could still be operatable.

• Cannot print or scan from MacBook Pro to Officejet 6500 E709n after Firmware upgrade

  I have-

  MacBook Pro; OS X 10.5.8

  JO HP 6500 E709n: Firmware RBP1FN0935AR connected by Ethernet to my network.

  Also several XP and Vista machines machine.

  I have most of my printing and scanning of MBP.  I've updated the firmware the week last version (above) found under the XP software and drivers for this printer.  I thought more recent firmware is always better.  In any case, after that, I can no longer print or scan from the MBP.  I've uninstalled and reinstalled the software on my MBP 2 times.  And I followed the instructions on this forum for posts with similar problems.

  I can see the printer in the Systerm preferences > Print & Fax.  He is registered and has a green light.  I can navigate to the printer and connect.  I can not state of ink.

  BUT when I run the Setup Wizard, the printer is not listed in the window "select the device".

  When I do 'add devices by IP' and enter the IP, I get a message saying that it could not connect to the printer.

  I can print from my XP and Vista machines.  The XP machine is a virtual machine on VMWare Fusion on my MBP.  So I now transfer that I want to print my XP VM just to print it.  Is NOT IDEAL, but that market.  Hoping to solve this problem.

  1. I try to downgrade the firmware to the previous version.  Is anyway to do this?  How can I get the previous version of firmware?

  2. I would like to know what ports are used to connect to the printer?  If anyone can let me know, I'll see if my MBP has those blocked or not.

  3. If anyone can offer a solution, I would appreciated it.

  OK, I finally found this thing.  What happened was that my wireless connection does not (for reasons unknown at this point) my Mac to connect to the printer.  Even if I can get to the Web page.  Hello may not cross.

  Anyway, on a whim, I disabled the airport and used an ethernet cable to connect to the same switch the 6500 was conducting and reinstalled the software.  And whaddaya know.  I was able to install the printer, then did a scan and printing and a jig around the room.

  I disconnected the cable and turn on the wireless connection, once again, and wouldn't you know, HP Scan Pro can not connect to the 6500.  Is returned to the thread and it works.  Hmmm.

  I am due for an in new wireless access point.  The DLink and my Verizon FIOS Actiontec router sometimes do strange things.

  I'll still give you, PrintDoc, 1 kudo for loans to help.  And the uninstalling of 3 keys; It was new to me.

  I may be the only one who has never fallen on this, but it may be useful to say, do NOT take your connection Wireless for granted.  Always test everything.

  Thank you

• UCR does not remove the dbf file

  Hello
  
  I just tried to drop the SOAINFRA schema and re-create it.
  However, recreation failed, because the old .dbf file has not been deleted.
  Leisure worked only after the file has been deleted manually.
  
  Env:
  Widows, Oracle Database 11 g 2

  Yes, I'm aware THAT RCU runs as sys.

  The user you started the database? It is this user who needs access to the ora_dba group.

  This isn't a mistake of the UCR, the error occurs because windows locks up the tablespace. Even if you manually delete the tablespace will be locked to the dbf file.

  see you soon
  James

• Files copied to external devices (USB/PHONE/CD-ROM) damaged when displayed

  Computer desktop running W7 SP1 with 64-bit system.  Files copied from the desktop to external devices are damaged when displayed.  Files can be JPEGs (photos) and or (e, g. XLS) data files.   Similar files copied from a laptop under W7 Service Pack One with a 32-bit system correctly screen.  Errors occur on the USB ports and CD-ROM drives used to copy the data.  This is potentially a problem of HD or something related to the operating system?

  Hi David,

  Thanks for posting your query on the Microsoft Community.

  As you mentioned that the files that you copy from desktop to external devices are damaged when displayed.

  This issue would have occurred due to a virus on your computer.

  I need some information to move forward.

  1. That you get an message\code error when you try to access these files?

  Maybe your computer got infected with a virus.

  So I suggest you view the Microsoft Help article and try the steps to find out if your system has a virus.

  http://Windows.Microsoft.com/en-us/Windows/does-computer-have-virus#1TC=Windows-7

  If you find that your computer has a virus please refer to the link below and follow the steps on how to remove computer virus.

  http://Windows.Microsoft.com/en-us/Windows/how-remove-computer-virus#how-remove-computer-virus=Windows-7

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  I hope this helps. Please let us know the status of the updates of your question. We will be happy to help you further.

• Out-of-place of the upgrade to 11.2.0.4 (from 11.2.0.3); How will this affect certain elements?

  
  Hi all

  I've never done an update of the fix for db set, and from what I've read today, I'll have to do a full install of 11.2.0.4 to have this patch set applied.

  Sounds scary, and being a rookie DBA Oracle, whatever that means to my existing installation of the Oracle (Oracle 11 g 2 on Windows Server 2008R2) database?

  If I do an upgrade out of place (recommended Oracle) and create a new home, what will happen to the existing/etc diagrams?

  My request is configured to connect to SERVERA, SID = 123 so when I install a new home, etc., does it change anything? I have read that I need to change the files tnsnames in my new home is similar to my current tnsnames file...

  Basically, I want to upgrade to the Group of hotfixes 11.2.0.4 b/c it is supposed to fix a bug that I have, but I want to be able to keep the 'settings' the same for end-users and applications (SERVERA, SID = 123).

  Thanks in advance

  It must be remembered that basic data/binaries are separate from the database itself.  As a general rule, you first install the software (as you did for 11.2.0.3) and then create a database. Best practices of States that the location of the database files must be outside/different then the location of the binary files.

  When you install your new 11.2.0.4 in a new place, it's all what you do - installation does not affect the existing database. Once the 11.2.0.4 software is installed, you can upgrade the database by following the steps described in upgrade guide (the stay of files of database where they are, but the database is updated from 11.2.0.3 to 11.2.0.4) and when the upgrade is completed successfully (11.2.0.3) old binaries can be uninstalled at leisure.

  HTH
  Srini

• How to Create Oracle Home for Windows Client?

  I downloaded the latest version of the client Oracle for Windows here:
  
  http://www.Oracle.com/technology/software/tech/OCI/instantclient/htdocs/WinSoft.html
  
  The problem is that they are just ZIP files, so they install an Oracle Home that I can select with the selector of the House. There are utilities that can create an Oracle Home registry entry for you?
  
  Thank you
  Kurz

  There is an option to download only client for Windows (and Linux I believe). It happens to be located along the coast that the downloads for you database make it as if you try to download the database and in the end, you will see an option for a client download only. The download only client that comes with the Oracle Universal Installer is a few hundred MB, not as big as the download of the database, but much better than the Instant Client download.

  Justin

• 11 GR 2 Oracle home path

  Hello
  
  It is a matter of design rather than a technical problem.
  
  With Oracle OFA paper [http://download.oracle.com/docs/cd/E11882_01/install.112/e17162/appendix_ofa.htm#BABHAIIJ].
  
  The grid and the Oracle Home are suggested to be:
  /*/app/Oracle/product/11.2.0/DB* for Oracle Database 11g oracle directories
  /*/app/Oracle/product/11.2.0/grid* oracle home directory for the Infrastructure of grid of Oracle 11 g for a stand-alone server for the oracle user
  
  
  However, I have read that there 11.2.0.2 group of patches, which is a new full version.
  Oracle recommends to have the upgrade of Out-of-place (this is Oracle recommended to apply a patch to the game. You install the hotfix in a new, separate Oracle home location) and this is Oracle approach in the future.
  Grid, it must be upgraded out of place.
  
  So does make sense that I should install the Oracle home /*/app/oracle/product/11.2.0.x/grid* and '/*/app/oracle/product/11.2.0.x/db* '?
  
  
  Thank you.
  
  Rocky

  Welcome to the forums!

  This is a valid and good question. I think that your approach is logical, given that future update sets (11.2.0.3 etc.) would be also (I hope) released that installs complete and will very likely need to be installed in separate houses.

  HTH
  Srini

• Need to copy the files from old XP disc in Vista by Doc

  Have the old OS XP disc I need to get the MDC in Vista64.  Drive appears in my computer on Vista and XP security will not read copy the required files to the vista system.

  Hard drive XP started under Vista64 OS, need to copy files from old drive XP in Vista by Doc security on files XP stopped, how do I solve the problem__

  Appropriate files on the old hard drive:

  Check the permissions of the file or folder the file is saved in and appropriated:
        
  1. right click on the file or folder and then click Properties.
  2. click on the Security tab.
  3. under group or user names, click your name to see the permissions you have.

  To open a file, you must have the read permission. For more information about permissions, see what are permissions?

  http://tinyurl.com/2j9vgr

  To take ownership of a folder:

  1 right click on the folder you want to take control and then click Properties.
  2. click on the Security tab, click Advanced, and then click the owner tab.
  3. click on modify. Need administrator permission if you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  4. click on the name of the person you want to give to the property.
  5. If you want this person to be the owner of the files and subfolders in this folder, select the Replace owner of subcontainers and objects to check.
  6. click on OK

  MS - MVP - Elephant Boy computers - don't panic!

• New hard drive. can I copy the old emails and local files from the old hard drive

  I installed a larger hard drive in my laptop. I still have the old hdd. Both run on Windows 8. How can I copy all the information like e-mail, files, etc. the old hdd to the new HDD. It is in Thunderbird. Please can someone help me?

  Article has step by step instructions.
  
  Where are you stuck?

• I have copy of old tbird and seamonkey e-mail files with the files and emails for each. I need to add to new tbird install. can not find a way to do it. Help

  I have copy of old tbird and seamonkey e-mail files with the files and emails for each. I need to add to new tbird install. can not find a way to do it. HELP PLEASE. previous e-mail files are under mail then mail.earthlink* .net and each of the five mail .net is an email address I have. I can't find a way to identify each file by email to the specific email address (IE mail.my E-mail name.net) so I can copy the files and emails from the past to the email addresses now under tbird. previous installed e-mail identities may not be the current configuration of e-mail files in tbird. I think that I must be sure that mail.name.net matches the previous mail.name.net to be able to copy and paste the old to the new. is there a way to find the file name correct the old email and correspond to the new? all my emails very important information are mostly in the old mail electronic id and must be available in the identification of email again (but same) how can I do this?

  http://KB.mozillazine.org/Importing_folders

  Use this module.

  https://addons.Mozilla.org/en-us/Thunderbird/addon/ImportExportTools/